Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4286 Publications
2022 | Journal Article | LibreCat-ID: 32413
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints,” Key Engineering Materials, vol. 926, pp. 1516–1526, 2022, doi: 10.4028/p-5d009y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 48360
M. Hopp and L. Tölle, “EFFECT OF SHREDDING PARAMETERS ON THE FORMATION OF AIRBORNE FIBER DUST DURING MECHANICAL RECYCLING OF FIBER-REINFORCED THERMOPLASTICS,” Proceedings of the 20th European Conference on Composite Materials, no. Vol. 6, pp. 119–125, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 48354
E. Moritzer and J. Wächter, “Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process,” presented at the 37th International Conference of the Polymer Processing Society, Fukuoka (Japan), 2022.
LibreCat
2022 | Book | LibreCat-ID: 48353
K. Gevers, L. Schraa, K. Uhlig, P. Töws, and M. Stommel, Bewertung von IR-Schweißverbindungen an kurzfaserverstärkten Thermoplasten mittels digitaler Bildkorrelation, vol. Tagung Werkstoffprüfung 2022-Werkstoffe und Bauteile auf dem Prüfstand. 2022, pp. 169–175.
LibreCat
2022 | Book | LibreCat-ID: 48356
V. Schöppner and S. Vogtschmidt, Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Koblenz, 2022, pp. 534–540.
LibreCat
2022 | Book | LibreCat-ID: 48358
V. Schöppner, M. Dörner, M. Frank, and C. Schall, On the Wave to Successful Mixing. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,” Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi: 10.3390/polym14153113.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34001 | 
B. Arian, W. Homberg, L. Kersting, A. Trächtler, and J. Rozo Vasquez, “Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen,” in 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form geben“, 2022, pp. 333–347.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34003 |
B. Arian et al., “A flow forming process model to predict workpiece properties in AISI 304L,” 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33852 |
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Newspaper Article | LibreCat-ID: 49323
F. Pfeifer, A. Jungeilges, and J. Behm, “Strom statt Gas: Nachhaltige Herstellung von Karosseriebauteilen,” Transforming Economies, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30220 |
I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44558.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2022 | Mastersthesis | LibreCat-ID: 51718
U. Schlattmann and J. Beimdiek, Charakterisierung von Schüttschichtmaterialien für den Einsatz in Filtern für häusliche Holzfeuerungsanlagen (Studienarbeit). Paderborn, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 44302
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science , 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33853 |
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2022 | Report | LibreCat-ID: 52045
C. Scheidemann, T. Hemsel, and W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022.
LibreCat
| Files available
| DOI
2022 | Conference Abstract | LibreCat-ID: 33204
A. J. S. Al-Lami and E. Y. Kenig, “Heat transfer enhancement with internally channeled tubes,” presented at the ProcessNet2022, Würzburg, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 36332 |
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat
| DOI