Olexandr Grydin

olexandr.grydin@uni-paderborn.de
ID
43822

61 Publications

Mark all

[61]
2024 | Journal Article | LibreCat-ID: 57540
S. Mallow et al., “Process chain of a twin-roll cast aluminium-copper-lithium alloy,” Production Engineering, 2024, doi: 10.1007/s11740-024-01322-x.
LibreCat | DOI
 
[60]
2023 | Conference Paper | LibreCat-ID: 43031
T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 187–194, doi: 10.21741/9781644902417-24.
LibreCat | DOI
 
[59]
2023 | Journal Article | LibreCat-ID: 52405
M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132.
LibreCat | DOI
 
[58]
2023 | Conference Paper | LibreCat-ID: 52406
O. Grydin, M. Neuser, and M. Schaper, “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy,” 2023, doi: 10.1007/978-3-031-41341-4_61.
LibreCat | DOI
 
[57]
2023 | Book Chapter | LibreCat-ID: 41959
O. Grydin et al., “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips,” in Light Metals 2023, S. Broek, Ed. Cham: Springer Nature Switzerland, 2023, pp. 1031–1037.
LibreCat | DOI | Download (ext.)
 
[56]
2023 | Journal Article | LibreCat-ID: 43441
M. Šlapáková et al., “3D-structure of intermetallic interface layer in Al–steel clad material,” Vacuum, vol. 212, Art. no. 112043, 2023, doi: 10.1016/j.vacuum.2023.112043.
LibreCat | DOI
 
[55]
2022 | Conference Paper | LibreCat-ID: 36335 | OA
M. CIESLAR et al., “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4438.
LibreCat | DOI | Download (ext.)
 
[54]
2022 | Journal Article | LibreCat-ID: 36332 | OA
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[53]
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat | DOI
 
[52]
2022 | Journal Article | LibreCat-ID: 29505
M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.
LibreCat | DOI
 
[51]
2022 | Journal Article | LibreCat-ID: 31828
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat | DOI
 
[50]
2022 | Journal Article | LibreCat-ID: 31238
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat | DOI
 
[49]
2022 | Book Chapter | LibreCat-ID: 29771
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[48]
2022 | Journal Article | LibreCat-ID: 34215
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat | DOI
 
[47]
2022 | Conference Paper | LibreCat-ID: 36339 | OA
L. BAJTOŠOVÁ et al., “Phase identification in twin-roll cast Al-Li alloys,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4437.
LibreCat | DOI | Download (ext.)
 
[46]
2022 | Journal Article | LibreCat-ID: 34097
D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,” Advanced Composite Materials, pp. 1–16, 2022, doi: 10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[45]
2022 | Journal Article | LibreCat-ID: 36327 | OA
A. Reitz, O. Grydin, and M. Schaper, “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel,” Metallurgical and Materials Transactions A, vol. 53, no. 8, pp. 3125–3142, 2022, doi: 10.1007/s11661-022-06732-z.
LibreCat | DOI | Download (ext.)
 
[44]
2022 | Journal Article | LibreCat-ID: 36328
M. Šlapáková et al., “The influence of surface on direction of diffusion in Al-Fe clad material,” Materials Characterization, vol. 190, Art. no. 112005, 2022, doi: 10.1016/j.matchar.2022.112005.
LibreCat | DOI | Download (ext.)
 
[43]
2022 | Journal Article | LibreCat-ID: 23794 | OA
H. Westermann, A. Reitz, R. Mahnken, M. Schaper, and O. Grydin, “Microstructure transformations in a press hardening steel during tailored thermo‐mechanical processing,” steel research international, 2022, doi: 10.1002/srin.202100346.
LibreCat | DOI | Download (ext.)
 
[42]
2022 | Journal Article | LibreCat-ID: 29811
A. Reitz, O. Grydin, and M. Schaper, “Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22MnB5,” Materials Science and Engineering: A, vol. 838, Art. no. 142780, 2022, doi: 10.1016/j.msea.2022.142780.
LibreCat | DOI | Download (ext.)
 
[41]
2021 | Conference Paper | LibreCat-ID: 25047 | OA
B. Křivská et al., “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1178, doi: 10.1088/1757-899x/1178/1/012035.
LibreCat | DOI | Download (ext.)
 
[40]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat | Download (ext.)
 
[39]
2021 | Journal Article | LibreCat-ID: 26191
D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, Art. no. 012028, 2021, doi: 10.1088/1757-899x/1190/1/012028.
LibreCat | DOI
 
[38]
2021 | Conference Paper | LibreCat-ID: 29812
B. Křivská et al., “In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet,” presented at the APCOM 2021, Online, 2021, doi: 10.1063/5.0067491.
LibreCat | DOI
 
[37]
2021 | Journal Article | LibreCat-ID: 24535
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat | DOI
 
[36]
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[35]
2021 | Journal Article | LibreCat-ID: 29089
H. Westermann, A. Reitz, R. Mahnken, O. Grydin, and M. Schaper, “Constitutive modeling of viscoplasticity including phase transformations for graded thermo‐mechanical processing,” PAMM, 2021, doi: 10.1002/pamm.202100041.
LibreCat | DOI
 
[34]
2021 | Conference Paper | LibreCat-ID: 24006
D. Weiß, B. Schramm, M. Neuser, O. Grydin, and G. Kullmer, “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie,” Bremen, 2021, vol. DVM-Bericht 253, pp. 231–240, doi: 10.48447/BR-2021-025.
LibreCat | DOI
 
[33]
2021 | Journal Article | LibreCat-ID: 41512
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[32]
2021 | Journal Article | LibreCat-ID: 29815 | OA
B. Křivská et al., “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet,” Materials, vol. 14, no. 24, Art. no. 7771, 2021, doi: 10.3390/ma14247771.
LibreCat | DOI | Download (ext.)
 
[31]
2021 | Journal Article | LibreCat-ID: 29813
M. Cieslar et al., “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 79–80, 2021, doi: 10.1017/s1431927621013398.
LibreCat | DOI
 
[30]
2021 | Journal Article | LibreCat-ID: 29814
B. Křivská et al., “Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 91–92, 2021, doi: 10.1017/s1431927621013453.
LibreCat | DOI
 
[29]
2021 | Journal Article | LibreCat-ID: 23913
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat | DOI
 
[28]
2021 | Journal Article | LibreCat-ID: 24565
D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,” Production Engineering, vol. 15, no. 2, pp. 263–270, 2021, doi: 10.1007/s11740-020-01006-2.
LibreCat | DOI
 
[27]
2021 | Journal Article | LibreCat-ID: 24566 | OA
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, and W. Bremser, “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte,” ChemElectroChem, pp. 2155–2168, 2021, doi: 10.1002/celc.202100216.
LibreCat | DOI | Download (ext.)
 
[26]
2021 | Journal Article | LibreCat-ID: 23897
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[25]
2021 | Journal Article | LibreCat-ID: 23803 | OA
A. Reitz, O. Grydin, and M. Schaper, “Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ,” Materials Data for Smart Forming Technologies, 2021.
LibreCat | Download (ext.)
 
[24]
2020 | Conference Paper | LibreCat-ID: 24567
B. Krivská et al., “Interdiffusion in aluminum-steel clad strip,” in Proc. 20th Conference of Czech and Slovak Physicists, Prague, 2020, pp. 153–154.
LibreCat
 
[23]
2020 | Journal Article | LibreCat-ID: 24568
S. Bondarenko, O. Grydin, Y. Oginskiy, O. Kuzmina, and Y. Frolov, “Device for twin-roll casting of strips with profiled cross-section,” Theory and practice of metallurgy, no. 1, pp. 44–50, 2020, doi: 10.34185/tpm.1.2020.06.
LibreCat | DOI
 
[22]
2020 | Conference Paper | LibreCat-ID: 24569
B. KŘIVSKÁ, M. ŠLAPÁKOVÁ, O. Grydin, and M. CIESLAR, “Aluminum-steel clad material prepared by twin-roll casting,” 2020, doi: 10.37904/metal.2020.3595.
LibreCat | DOI
 
[21]
2020 | Journal Article | LibreCat-ID: 24570
Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, and O. Grydin, “Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding,” Journal of Manufacturing Processes, vol. 58, pp. 857–867, 2020, doi: 10.1016/j.jmapro.2020.08.049.
LibreCat | DOI
 
[20]
2020 | Journal Article | LibreCat-ID: 24574
S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, and O. Bobukh, “Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050,” Modern Problems of Metallurgy – Scientific Bulletin, vol. 23, pp. 91–101, 2020.
LibreCat
 
[19]
2020 | Book Chapter | LibreCat-ID: 23801
A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in The Minerals, Metals & Materials Series, Cham: Springer, 2020.
LibreCat | DOI | Download (ext.)
 
[18]
2020 | Book Chapter | LibreCat-ID: 24575
O. Grydin, M. Stolbchenko, and M. Schaper, “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2020, Cham, 2020, pp. 1039–1044.
LibreCat | DOI
 
[17]
2020 | Journal Article | LibreCat-ID: 23797 | OA
A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5,” Metallurgical and Materials Transactions A, pp. 5628–5638, 2020, doi: 10.1007/s11661-020-05976-x.
LibreCat | DOI | Download (ext.)
 
[16]
2020 | Journal Article | LibreCat-ID: 24573 | OA
O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987.
LibreCat | DOI | Download (ext.)
 
[15]
2020 | Journal Article | LibreCat-ID: 24572
M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi: 10.1177/1099636218792539.
LibreCat | DOI
 
[14]
2020 | Journal Article | LibreCat-ID: 41522
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 4, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat | DOI
 
[13]
2020 | Journal Article | LibreCat-ID: 24571
M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, pp. 1599–1608, 2020, doi: 10.1080/15376494.2018.1520941.
LibreCat | DOI
 
[12]
2020 | Journal Article | LibreCat-ID: 23899
O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, and M. Schaper, “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads,” Advanced Engineering Materials, Art. no. 2000130, 2020, doi: 10.1002/adem.202000130.
LibreCat | DOI
 
[11]
2020 | Journal Article | LibreCat-ID: 23896
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat | DOI
 
[10]
2019 | Journal Article | LibreCat-ID: 23907
O. Grydin et al., “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082,” Materials Science Forum, pp. 85–92, 2019, doi: 10.4028/www.scientific.net/msf.949.85.
LibreCat | DOI
 
[9]
2019 | Journal Article | LibreCat-ID: 23900
O. Grydin et al., “Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties,” Materials Science and Engineering: A, pp. 176–195, 2019, doi: 10.1016/j.msea.2019.02.025.
LibreCat | DOI
 
[8]
2019 | Journal Article | LibreCat-ID: 23901
O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, and M. Schaper, “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel,” Advanced Engineering Materials, Art. no. 1900134, 2019, doi: 10.1002/adem.201900134.
LibreCat | DOI
 
[7]
2018 | Journal Article | LibreCat-ID: 23902
O. Grydin et al., “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082,” JOM, pp. 407–418, 2018, doi: 10.1007/s11837-018-3144-1.
LibreCat | DOI
 
[6]
2017 | Journal Article | LibreCat-ID: 23904
O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, and M. Schaper, “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling,” steel research international, 2017.
LibreCat | DOI
 
[5]
2017 | Book Chapter | LibreCat-ID: 23910
A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press Hardening Processing,” in Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.
LibreCat | DOI
 
[4]
2016 | Journal Article | LibreCat-ID: 24111
W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” Procedia Structural Integrity, pp. 3040–3048, 2016, doi: 10.1016/j.prostr.2016.06.380.
LibreCat | DOI
 
[3]
2016 | Journal Article | LibreCat-ID: 41533
W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” Procedia Structural Integrity, vol. 2, pp. 3040–3048, 2016, doi: 10.1016/j.prostr.2016.06.380.
LibreCat | DOI
 
[2]
2016 | Journal Article | LibreCat-ID: 23905
A. Andreiev, O. Grydin, and M. Schaper, “Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching,” steel research international, pp. 1733–1741, 2016, doi: 10.1002/srin.201600086.
LibreCat | DOI
 
[1]
2015 | Journal Article | LibreCat-ID: 23906
A. Andreiev et al., “Testing of pipe sections,” Materials Testing, pp. 643–648, 2015, doi: 10.3139/120.110759.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

61 Publications

Mark all

[61]
2024 | Journal Article | LibreCat-ID: 57540
S. Mallow et al., “Process chain of a twin-roll cast aluminium-copper-lithium alloy,” Production Engineering, 2024, doi: 10.1007/s11740-024-01322-x.
LibreCat | DOI
 
[60]
2023 | Conference Paper | LibreCat-ID: 43031
T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 187–194, doi: 10.21741/9781644902417-24.
LibreCat | DOI
 
[59]
2023 | Journal Article | LibreCat-ID: 52405
M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132.
LibreCat | DOI
 
[58]
2023 | Conference Paper | LibreCat-ID: 52406
O. Grydin, M. Neuser, and M. Schaper, “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy,” 2023, doi: 10.1007/978-3-031-41341-4_61.
LibreCat | DOI
 
[57]
2023 | Book Chapter | LibreCat-ID: 41959
O. Grydin et al., “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips,” in Light Metals 2023, S. Broek, Ed. Cham: Springer Nature Switzerland, 2023, pp. 1031–1037.
LibreCat | DOI | Download (ext.)
 
[56]
2023 | Journal Article | LibreCat-ID: 43441
M. Šlapáková et al., “3D-structure of intermetallic interface layer in Al–steel clad material,” Vacuum, vol. 212, Art. no. 112043, 2023, doi: 10.1016/j.vacuum.2023.112043.
LibreCat | DOI
 
[55]
2022 | Conference Paper | LibreCat-ID: 36335 | OA
M. CIESLAR et al., “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4438.
LibreCat | DOI | Download (ext.)
 
[54]
2022 | Journal Article | LibreCat-ID: 36332 | OA
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[53]
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat | DOI
 
[52]
2022 | Journal Article | LibreCat-ID: 29505
M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.
LibreCat | DOI
 
[51]
2022 | Journal Article | LibreCat-ID: 31828
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat | DOI
 
[50]
2022 | Journal Article | LibreCat-ID: 31238
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat | DOI
 
[49]
2022 | Book Chapter | LibreCat-ID: 29771
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[48]
2022 | Journal Article | LibreCat-ID: 34215
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat | DOI
 
[47]
2022 | Conference Paper | LibreCat-ID: 36339 | OA
L. BAJTOŠOVÁ et al., “Phase identification in twin-roll cast Al-Li alloys,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4437.
LibreCat | DOI | Download (ext.)
 
[46]
2022 | Journal Article | LibreCat-ID: 34097
D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,” Advanced Composite Materials, pp. 1–16, 2022, doi: 10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[45]
2022 | Journal Article | LibreCat-ID: 36327 | OA
A. Reitz, O. Grydin, and M. Schaper, “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel,” Metallurgical and Materials Transactions A, vol. 53, no. 8, pp. 3125–3142, 2022, doi: 10.1007/s11661-022-06732-z.
LibreCat | DOI | Download (ext.)
 
[44]
2022 | Journal Article | LibreCat-ID: 36328
M. Šlapáková et al., “The influence of surface on direction of diffusion in Al-Fe clad material,” Materials Characterization, vol. 190, Art. no. 112005, 2022, doi: 10.1016/j.matchar.2022.112005.
LibreCat | DOI | Download (ext.)
 
[43]
2022 | Journal Article | LibreCat-ID: 23794 | OA
H. Westermann, A. Reitz, R. Mahnken, M. Schaper, and O. Grydin, “Microstructure transformations in a press hardening steel during tailored thermo‐mechanical processing,” steel research international, 2022, doi: 10.1002/srin.202100346.
LibreCat | DOI | Download (ext.)
 
[42]
2022 | Journal Article | LibreCat-ID: 29811
A. Reitz, O. Grydin, and M. Schaper, “Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22MnB5,” Materials Science and Engineering: A, vol. 838, Art. no. 142780, 2022, doi: 10.1016/j.msea.2022.142780.
LibreCat | DOI | Download (ext.)
 
[41]
2021 | Conference Paper | LibreCat-ID: 25047 | OA
B. Křivská et al., “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1178, doi: 10.1088/1757-899x/1178/1/012035.
LibreCat | DOI | Download (ext.)
 
[40]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat | Download (ext.)
 
[39]
2021 | Journal Article | LibreCat-ID: 26191
D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, Art. no. 012028, 2021, doi: 10.1088/1757-899x/1190/1/012028.
LibreCat | DOI
 
[38]
2021 | Conference Paper | LibreCat-ID: 29812
B. Křivská et al., “In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet,” presented at the APCOM 2021, Online, 2021, doi: 10.1063/5.0067491.
LibreCat | DOI
 
[37]
2021 | Journal Article | LibreCat-ID: 24535
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat | DOI
 
[36]
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[35]
2021 | Journal Article | LibreCat-ID: 29089
H. Westermann, A. Reitz, R. Mahnken, O. Grydin, and M. Schaper, “Constitutive modeling of viscoplasticity including phase transformations for graded thermo‐mechanical processing,” PAMM, 2021, doi: 10.1002/pamm.202100041.
LibreCat | DOI
 
[34]
2021 | Conference Paper | LibreCat-ID: 24006
D. Weiß, B. Schramm, M. Neuser, O. Grydin, and G. Kullmer, “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie,” Bremen, 2021, vol. DVM-Bericht 253, pp. 231–240, doi: 10.48447/BR-2021-025.
LibreCat | DOI
 
[33]
2021 | Journal Article | LibreCat-ID: 41512
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[32]
2021 | Journal Article | LibreCat-ID: 29815 | OA
B. Křivská et al., “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet,” Materials, vol. 14, no. 24, Art. no. 7771, 2021, doi: 10.3390/ma14247771.
LibreCat | DOI | Download (ext.)
 
[31]
2021 | Journal Article | LibreCat-ID: 29813
M. Cieslar et al., “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 79–80, 2021, doi: 10.1017/s1431927621013398.
LibreCat | DOI
 
[30]
2021 | Journal Article | LibreCat-ID: 29814
B. Křivská et al., “Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 91–92, 2021, doi: 10.1017/s1431927621013453.
LibreCat | DOI
 
[29]
2021 | Journal Article | LibreCat-ID: 23913
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat | DOI
 
[28]
2021 | Journal Article | LibreCat-ID: 24565
D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,” Production Engineering, vol. 15, no. 2, pp. 263–270, 2021, doi: 10.1007/s11740-020-01006-2.
LibreCat | DOI
 
[27]
2021 | Journal Article | LibreCat-ID: 24566 | OA
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, and W. Bremser, “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte,” ChemElectroChem, pp. 2155–2168, 2021, doi: 10.1002/celc.202100216.
LibreCat | DOI | Download (ext.)
 
[26]
2021 | Journal Article | LibreCat-ID: 23897
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[25]
2021 | Journal Article | LibreCat-ID: 23803 | OA
A. Reitz, O. Grydin, and M. Schaper, “Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ,” Materials Data for Smart Forming Technologies, 2021.
LibreCat | Download (ext.)
 
[24]
2020 | Conference Paper | LibreCat-ID: 24567
B. Krivská et al., “Interdiffusion in aluminum-steel clad strip,” in Proc. 20th Conference of Czech and Slovak Physicists, Prague, 2020, pp. 153–154.
LibreCat
 
[23]
2020 | Journal Article | LibreCat-ID: 24568
S. Bondarenko, O. Grydin, Y. Oginskiy, O. Kuzmina, and Y. Frolov, “Device for twin-roll casting of strips with profiled cross-section,” Theory and practice of metallurgy, no. 1, pp. 44–50, 2020, doi: 10.34185/tpm.1.2020.06.
LibreCat | DOI
 
[22]
2020 | Conference Paper | LibreCat-ID: 24569
B. KŘIVSKÁ, M. ŠLAPÁKOVÁ, O. Grydin, and M. CIESLAR, “Aluminum-steel clad material prepared by twin-roll casting,” 2020, doi: 10.37904/metal.2020.3595.
LibreCat | DOI
 
[21]
2020 | Journal Article | LibreCat-ID: 24570
Y. Frolov, Y. Haranich, O. Bobukh, O. Remez, D. Voswinkel, and O. Grydin, “Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding,” Journal of Manufacturing Processes, vol. 58, pp. 857–867, 2020, doi: 10.1016/j.jmapro.2020.08.049.
LibreCat | DOI
 
[20]
2020 | Journal Article | LibreCat-ID: 24574
S. Bondarenko, O. Grydin, Y. Frolov, O. Kuzmina, and O. Bobukh, “Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050,” Modern Problems of Metallurgy – Scientific Bulletin, vol. 23, pp. 91–101, 2020.
LibreCat
 
[19]
2020 | Book Chapter | LibreCat-ID: 23801
A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in The Minerals, Metals & Materials Series, Cham: Springer, 2020.
LibreCat | DOI | Download (ext.)
 
[18]
2020 | Book Chapter | LibreCat-ID: 24575
O. Grydin, M. Stolbchenko, and M. Schaper, “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2020, Cham, 2020, pp. 1039–1044.
LibreCat | DOI
 
[17]
2020 | Journal Article | LibreCat-ID: 23797 | OA
A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5,” Metallurgical and Materials Transactions A, pp. 5628–5638, 2020, doi: 10.1007/s11661-020-05976-x.
LibreCat | DOI | Download (ext.)
 
[16]
2020 | Journal Article | LibreCat-ID: 24573 | OA
O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987.
LibreCat | DOI | Download (ext.)
 
[15]
2020 | Journal Article | LibreCat-ID: 24572
M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi: 10.1177/1099636218792539.
LibreCat | DOI
 
[14]
2020 | Journal Article | LibreCat-ID: 41522
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 4, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat | DOI
 
[13]
2020 | Journal Article | LibreCat-ID: 24571
M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, pp. 1599–1608, 2020, doi: 10.1080/15376494.2018.1520941.
LibreCat | DOI
 
[12]
2020 | Journal Article | LibreCat-ID: 23899
O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, and M. Schaper, “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads,” Advanced Engineering Materials, Art. no. 2000130, 2020, doi: 10.1002/adem.202000130.
LibreCat | DOI
 
[11]
2020 | Journal Article | LibreCat-ID: 23896
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat | DOI
 
[10]
2019 | Journal Article | LibreCat-ID: 23907
O. Grydin et al., “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082,” Materials Science Forum, pp. 85–92, 2019, doi: 10.4028/www.scientific.net/msf.949.85.
LibreCat | DOI
 
[9]
2019 | Journal Article | LibreCat-ID: 23900
O. Grydin et al., “Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties,” Materials Science and Engineering: A, pp. 176–195, 2019, doi: 10.1016/j.msea.2019.02.025.
LibreCat | DOI
 
[8]
2019 | Journal Article | LibreCat-ID: 23901
O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, and M. Schaper, “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel,” Advanced Engineering Materials, Art. no. 1900134, 2019, doi: 10.1002/adem.201900134.
LibreCat | DOI
 
[7]
2018 | Journal Article | LibreCat-ID: 23902
O. Grydin et al., “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082,” JOM, pp. 407–418, 2018, doi: 10.1007/s11837-018-3144-1.
LibreCat | DOI
 
[6]
2017 | Journal Article | LibreCat-ID: 23904
O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, and M. Schaper, “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling,” steel research international, 2017.
LibreCat | DOI
 
[5]
2017 | Book Chapter | LibreCat-ID: 23910
A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press Hardening Processing,” in Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.
LibreCat | DOI
 
[4]
2016 | Journal Article | LibreCat-ID: 24111
W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” Procedia Structural Integrity, pp. 3040–3048, 2016, doi: 10.1016/j.prostr.2016.06.380.
LibreCat | DOI
 
[3]
2016 | Journal Article | LibreCat-ID: 41533
W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” Procedia Structural Integrity, vol. 2, pp. 3040–3048, 2016, doi: 10.1016/j.prostr.2016.06.380.
LibreCat | DOI
 
[2]
2016 | Journal Article | LibreCat-ID: 23905
A. Andreiev, O. Grydin, and M. Schaper, “Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching,” steel research international, pp. 1733–1741, 2016, doi: 10.1002/srin.201600086.
LibreCat | DOI
 
[1]
2015 | Journal Article | LibreCat-ID: 23906
A. Andreiev et al., “Testing of pipe sections,” Materials Testing, pp. 643–648, 2015, doi: 10.3139/120.110759.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed