TRR 285 - Project Area C
92 Publications
2021 | Journal Article | LibreCat-ID: 30647
Inverse parameter identification of an anisotropic plasticity model for sheet metal
J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, P. Steinmann, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012004.
LibreCat
| DOI
J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, P. Steinmann, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012004.
2021 | Journal Article | LibreCat-ID: 30645
Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics
J. Popp, M. Wolf, T. Mattner, D. Drummer, Journal of Composites Science 5 (2021) 239.
LibreCat
| DOI
J. Popp, M. Wolf, T. Mattner, D. Drummer, Journal of Composites Science 5 (2021) 239.
2021 | Journal Article | LibreCat-ID: 30650
Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012077.
LibreCat
| DOI
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012077.
2021 | Journal Article | LibreCat-ID: 30653
Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins
J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, D. Drummer, Applied Composite Materials 28 (2021) 951–972.
LibreCat
| DOI
J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, D. Drummer, Applied Composite Materials 28 (2021) 951–972.
2021 | Journal Article | LibreCat-ID: 30662
Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks
M. Busch, T. Hausotte, Key Engineering Materials 883 (2021) 41–48.
LibreCat
| DOI
M. Busch, T. Hausotte, Key Engineering Materials 883 (2021) 41–48.
2021 | Journal Article | LibreCat-ID: 30659
Clinching in In-situ CT – Experimental Study on Suitable Tool Materials
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).
2021 | Journal Article | LibreCat-ID: 30661
In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021) 1859.
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021) 1859.
2021 | Journal Article | LibreCat-ID: 30719
Friction Characterisation for a Tumbling Self-Piercing Riveting Process
S. Wituschek, M. Lechner, Key Engineering Materials 883 (2021) 27–34.
LibreCat
| DOI
S. Wituschek, M. Lechner, Key Engineering Materials 883 (2021) 27–34.
2022 | Journal Article | LibreCat-ID: 34207
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat
| DOI
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
2022 | Book Chapter | LibreCat-ID: 34212
Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 34219
Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing
D. Römisch, M. Kraus, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236 (2022) 1187–1202.
LibreCat
| DOI
D. Römisch, M. Kraus, M. Merklein, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236 (2022) 1187–1202.
2022 | Journal Article | LibreCat-ID: 34223
Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).
LibreCat
| DOI
J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).
2022 | Journal Article | LibreCat-ID: 34225
Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, M. Gude, Materials 15 (2022).
LibreCat
| DOI
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, M. Gude, Materials 15 (2022).
2022 | Journal Article | LibreCat-ID: 34221
Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie
F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.
LibreCat
| DOI
F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.
2022 | Journal Article | LibreCat-ID: 34220
Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen
M. Busch, L. Butzhammer, T. Hausotte, Tm - Technisches Messen 89 (2022) 83–88.
LibreCat
| DOI
M. Busch, L. Butzhammer, T. Hausotte, Tm - Technisches Messen 89 (2022) 83–88.
2021 | Journal Article | LibreCat-ID: 30649
Joining with Friction Spun Joint Connectors – Manufacturing and Analysis
C. Wischer, C. Steinfelder, W. Homberg, A. Brosius, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012007.
LibreCat
| DOI
C. Wischer, C. Steinfelder, W. Homberg, A. Brosius, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012007.
2021 | Journal Article | LibreCat-ID: 30702
A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning
C. Wischer, W. Homberg, Production Engineering (2021).
LibreCat
| DOI
C. Wischer, W. Homberg, Production Engineering (2021).
2022 | Journal Article | LibreCat-ID: 30626
Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2022) 100089.
LibreCat
| DOI
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2022) 100089.
2022 | Journal Article | LibreCat-ID: 30625
Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating
J. Popp, D. Drummer, Journal of Advanced Joining Processes 5 (2022) 100084.
LibreCat
| DOI
J. Popp, D. Drummer, Journal of Advanced Joining Processes 5 (2022) 100084.
2022 | Journal Article | LibreCat-ID: 30717
Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, Production Engineering (2022).
LibreCat
| DOI
S. Wituschek, M. Lechner, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 30640
Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography
M. Busch, T. Hausotte, Production Engineering (2022).
LibreCat
| DOI
M. Busch, T. Hausotte, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 34249 | 
Robustness Analysis of Pin Joining
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).
LibreCat
| DOI
| Download (ext.)
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).
2022 | Journal Article | LibreCat-ID: 34248 |
Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).
LibreCat
| DOI
| Download (ext.)
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).
2022 | Journal Article | LibreCat-ID: 34247 |
Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites
B. Gröger, D. Römisch, M. Kraus, J. Troschitz, R. Füßel, M. Merklein, M. Gude, Polymers 14 (2022).
LibreCat
| DOI
| Download (ext.)
B. Gröger, D. Römisch, M. Kraus, J. Troschitz, R. Füßel, M. Merklein, M. Gude, Polymers 14 (2022).
2022 | Journal Article | LibreCat-ID: 34214
Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation
J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148.
LibreCat
| DOI
J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148.
2022 | Conference Paper | LibreCat-ID: 34280
Investigations on Combined in situ CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.
LibreCat
| DOI
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.
2021 | Journal Article | LibreCat-ID: 30698
Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering (2021).
LibreCat
| DOI
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering (2021).
2021 | Journal Article | LibreCat-ID: 30701
Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking
D. Römisch, J. Popp, D. Drummer, M. Merklein, Production Engineering (2021).
LibreCat
| DOI
D. Römisch, J. Popp, D. Drummer, M. Merklein, Production Engineering (2021).
2021 | Journal Article | LibreCat-ID: 30697
A New Non-destructive Testing Method Applied to Clinching
R. Lafarge, A. Wolf, C. Guilleaume, A. Brosius, Minerals, Metals and Materials Series (2021) 1461.
LibreCat
| DOI
R. Lafarge, A. Wolf, C. Guilleaume, A. Brosius, Minerals, Metals and Materials Series (2021) 1461.
2021 | Journal Article | LibreCat-ID: 30684
Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures
D. Römisch, M. Kraus, M. Merklein, Journal of Manufacturing and Materials Processing 5 (2021) 25.
LibreCat
| DOI
D. Römisch, M. Kraus, M. Merklein, Journal of Manufacturing and Materials Processing 5 (2021) 25.
2021 | Journal Article | LibreCat-ID: 30682
Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements
D. Römisch, M. Kraus, M. Merklein, Key Engineering Materials 883 (2021) 19–26.
LibreCat
| DOI
D. Römisch, M. Kraus, M. Merklein, Key Engineering Materials 883 (2021) 19–26.
2021 | Journal Article | LibreCat-ID: 30718
Material characterisation methods for a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, ESAFORM 2021 (2021).
LibreCat
| DOI
S. Wituschek, M. Lechner, ESAFORM 2021 (2021).
2021 | Journal Article | LibreCat-ID: 30683
A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.
LibreCat
| DOI
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.
2021 | Journal Article | LibreCat-ID: 30685
Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC)
E. Wiens, C. Wischer, W. Homberg, ESAFORM (2021) 4682.
LibreCat
| DOI
E. Wiens, C. Wischer, W. Homberg, ESAFORM (2021) 4682.
2020 | Journal Article | LibreCat-ID: 30707
Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach
B. Sadeghian, C. Guilleaume, R. Lafarge, A. Brosius, Lecture Notes in Production Engineering (2020) 116–124.
LibreCat
| DOI
B. Sadeghian, C. Guilleaume, R. Lafarge, A. Brosius, Lecture Notes in Production Engineering (2020) 116–124.
2020 | Journal Article | LibreCat-ID: 30712
Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process
D. Köhler, B. Gröger, R. Kupfer, A. Hornig, M. Gude, Procedia Manufacturing 47 (2020) 940–947.
LibreCat
| DOI
D. Köhler, B. Gröger, R. Kupfer, A. Hornig, M. Gude, Procedia Manufacturing 47 (2020) 940–947.
2020 | Journal Article | LibreCat-ID: 30709
Clinching in in-situ CT—A numerical study on suitable tool materials
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020) 100034.
LibreCat
| DOI
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020) 100034.
2020 | Journal Article | LibreCat-ID: 30703
Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures
M. Kraus, M. Merklein, Journal of Materials Processing Technology 283 (2020) 116697.
LibreCat
| DOI
M. Kraus, M. Merklein, Journal of Materials Processing Technology 283 (2020) 116697.
2019 | Journal Article | LibreCat-ID: 30716
Mechanical joining without auxiliary element by cold formed pins for multi-material-systems
M. Kraus, P. Frey, T. Kleffel, D. Drummer, M. Merklein, AIP Conference Proceedings 2113 (2019) 050006.
LibreCat
| DOI
M. Kraus, P. Frey, T. Kleffel, D. Drummer, M. Merklein, AIP Conference Proceedings 2113 (2019) 050006.
2020 | Journal Article | LibreCat-ID: 30721
Test Method for Friction Characterization of Rivets
S. Wituschek, C.M. Kuball, M. Merklein, M. Lechner, Defect and Diffusion Forum 404 (2020) 132–137.
LibreCat
| DOI
S. Wituschek, C.M. Kuball, M. Merklein, M. Lechner, Defect and Diffusion Forum 404 (2020) 132–137.
2022 | Conference Paper | LibreCat-ID: 36462 |
Experimental Measurement Method and Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets
R. Stephan, A. Brosius, in: The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT, MDPI, 2022.
LibreCat
| DOI
| Download (ext.)
R. Stephan, A. Brosius, in: The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT, MDPI, 2022.
2022 | Conference Paper | LibreCat-ID: 36468
Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design
D. Römisch, M. Merklein, in: 2022.
LibreCat
D. Römisch, M. Merklein, in: 2022.
2022 | Conference Paper | LibreCat-ID: 36470
Versatile tool design for a tumbling self-piercing riveting process
S. Wituschek, M. Lechner, in: 2022.
LibreCat
S. Wituschek, M. Lechner, in: 2022.
2022 | Conference Paper | LibreCat-ID: 36473 |
Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, in: 2022.
LibreCat
| Download (ext.)
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, in: 2022.
2022 | Journal Article | LibreCat-ID: 36332 |
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat
| DOI
| Download (ext.)
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
2021 | Journal Article | LibreCat-ID: 24537
Joining suitability of cast aluminium for self-piercing riveting
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat
| DOI
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
2022 | Journal Article | LibreCat-ID: 34215
Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
2023 | Conference Paper | LibreCat-ID: 52831 |
Dynamic conformity assessment for joining force monitoring using Bayes filters
L. Butzhammer, F. Kappe, G. Meschut, T. Hausotte, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
| Download (ext.)
L. Butzhammer, F. Kappe, G. Meschut, T. Hausotte, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Conference Paper | LibreCat-ID: 52821 |
Combination of versatile self-piercing riveting processes
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
| Download (ext.)
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2022 | Journal Article | LibreCat-ID: 34264 |
Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere
L. Butzhammer, A.M. Müller, T. Hausotte, Measurement Science and Technology 34 (2022).
LibreCat
| DOI
| Download (ext.)
L. Butzhammer, A.M. Müller, T. Hausotte, Measurement Science and Technology 34 (2022).
2023 | Journal Article | LibreCat-ID: 36800 |
Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners
M. Busch, T. Hausotte, Journal of Sensors and Sensor Systems 12 (2023) 1–8.
LibreCat
| DOI
| Download (ext.)
M. Busch, T. Hausotte, Journal of Sensors and Sensor Systems 12 (2023) 1–8.
2023 | Conference Paper | LibreCat-ID: 38509
Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser Doppler Vibrometers
A. Brosius, L. Ewenz, R. Stephan, M. Zimmermann, in: M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.
LibreCat
A. Brosius, L. Ewenz, R. Stephan, M. Zimmermann, in: M. Zimmermann (Ed.), Tagung Werkstoffprüfung 2022, Deutsche Gesellschaft für Materialkunde e.V. (DGM), 2023.
2021 | Journal Article | LibreCat-ID: 38517
Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins
J. Popp, T. Kleffel, D. Drummer, Joining Plastics 15 (2021).
LibreCat
J. Popp, T. Kleffel, D. Drummer, Joining Plastics 15 (2021).
2022 | Journal Article | LibreCat-ID: 34216
Review on mechanical joining by plastic deformation
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
2021 | Conference Paper | LibreCat-ID: 34222
Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.
LibreCat
| DOI
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.
2022 | Journal Article | LibreCat-ID: 34243
Geometric and mechanical joint characterization of conventionally and tumbled self-piercing riveting joints
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 34242
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat
| DOI
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
2020 | Conference Paper | LibreCat-ID: 20680
Investigation of influencing parameters on the joint formation of the self-piercing riveting process
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.
LibreCat
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.
2022 | Journal Article | LibreCat-ID: 31360
Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC)
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).
LibreCat
| DOI
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).
2022 | Journal Article | LibreCat-ID: 34241
Joining of multi-material structures using a versatile self-piercing riveting process
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 30100
Provision of cross-domain knowledge in mechanical joining using ontologies
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
LibreCat
| DOI
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
2022 | Book Chapter | LibreCat-ID: 34275
Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
2021 | Journal Article | LibreCat-ID: 22798
Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.
LibreCat
| DOI
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.
2021 | Journal Article | LibreCat-ID: 34226
New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
LibreCat
| DOI
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
2022 | Journal Article | LibreCat-ID: 34244
Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods
F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, G. Meschut, Journal of Manufacturing Processes 84 (2022) 1438–1448.
LibreCat
| DOI
F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, G. Meschut, Journal of Manufacturing Processes 84 (2022) 1438–1448.
2022 | Journal Article | LibreCat-ID: 29858
Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
LibreCat
| DOI
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 29857
Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
2021 | Journal Article | LibreCat-ID: 30200
Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process
S. Wituschek, F. Kappe, M. Lechner, Production Engineering (2021).
LibreCat
| DOI
S. Wituschek, F. Kappe, M. Lechner, Production Engineering (2021).
2020 | Journal Article | LibreCat-ID: 30713
Joining with Versatile Friction-Spun Joint Connectors
T. Rostek, E. Wiens, W. Homberg, Procedia Manufacturing 47 (2020) 395–399.
LibreCat
| DOI
T. Rostek, E. Wiens, W. Homberg, Procedia Manufacturing 47 (2020) 395–399.
2021 | Journal Article | LibreCat-ID: 26082
Joining with versatile joining elements formed by friction spinning
C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3 (2021).
LibreCat
| DOI
C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3 (2021).
2023 | Conference Paper | LibreCat-ID: 46476
Versatile self-piercing riveting with a tumbling superimposed punch
S. Wituschek, L. Elbel, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
S. Wituschek, L. Elbel, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2024 | Journal Article | LibreCat-ID: 58348 |
In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points
G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).
LibreCat
| DOI
| Download (ext.)
G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).
2023 | Book Chapter | LibreCat-ID: 58350
Investigations on Continuous Transient Dynamic Analysis of Clinched Aluminum Sheets
G. Reschke, A. Brosius, in: Lecture Notes in Production Engineering, Springer Nature Switzerland, Cham, 2023.
LibreCat
| DOI
G. Reschke, A. Brosius, in: Lecture Notes in Production Engineering, Springer Nature Switzerland, Cham, 2023.
2025 | Journal Article | LibreCat-ID: 58495
Investigation of local heat treatment strategies for a multi-range capable rivet and the influence on joint formation and load-bearing capacity
P.K. Holtkamp, F. Kappe, P. Probst, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2025).
LibreCat
| DOI
P.K. Holtkamp, F. Kappe, P. Probst, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2025).
2025 | Conference Paper | LibreCat-ID: 59483
Transient dynamic analysis: Performance evaluation of tactile measurement
G. Reschke, A. Brosius, in: Materials Research Proceedings, Materials Research Forum LLC, 2025, pp. 293–300.
LibreCat
| DOI
G. Reschke, A. Brosius, in: Materials Research Proceedings, Materials Research Forum LLC, 2025, pp. 293–300.
2024 | Journal Article | LibreCat-ID: 60106
In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points
G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).
LibreCat
| DOI
G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024).
2024 | Journal Article | LibreCat-ID: 60105
In-situ computed tomography analysis of the failure mechanisms of thermomechanically manufactured joints with auxiliary joining element
T. Borgert, D. Köhler, E. Wiens, R. Kupfer, J. Troschitz, W. Homberg, M. Gude, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 238 (2024) 2299–2306.
LibreCat
| DOI
T. Borgert, D. Köhler, E. Wiens, R. Kupfer, J. Troschitz, W. Homberg, M. Gude, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 238 (2024) 2299–2306.
2025 | Conference Paper | LibreCat-ID: 60108
In situ computed tomography – Analysis of settling effects during single-lap shear tests with clinch points
D. Köhler, J. Troschitz, R. Kupfer, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.
LibreCat
| DOI
D. Köhler, J. Troschitz, R. Kupfer, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.
2022 | Journal Article | LibreCat-ID: 51192
Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, E-Journal of Nondestructive Testing 27 (2022).
LibreCat
| DOI
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, E-Journal of Nondestructive Testing 27 (2022).
2022 | Conference Paper | LibreCat-ID: 51191
Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.
LibreCat
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.
2023 | Conference Paper | LibreCat-ID: 51190
Comparison of ex- and in-situ investigations of clinched single-lap shear specimens
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2024 | Conference Paper | LibreCat-ID: 60107
In-situ CT of the clinching process – Influence of settling effects due to process interruptions
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2024.
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings, Materials Research Forum LLC, 2024.
2023 | Book Chapter | LibreCat-ID: 51194
In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Lecture Notes in Production Engineering, Springer International Publishing, Cham, 2023.
LibreCat
| DOI
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Lecture Notes in Production Engineering, Springer International Publishing, Cham, 2023.
2022 | Book Chapter | LibreCat-ID: 51195
Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 51197
Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, Key Engineering Materials 926 (2022) 1489–1497.
LibreCat
| DOI
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, Key Engineering Materials 926 (2022) 1489–1497.
2021 | Journal Article | LibreCat-ID: 51202
A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.
LibreCat
| DOI
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key Engineering Materials 883 (2021) 89–96.
2021 | Journal Article | LibreCat-ID: 51199
Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering 16 (2021) 203–212.
LibreCat
| DOI
B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering 16 (2021) 203–212.
2021 | Journal Article | LibreCat-ID: 51200
In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021).
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021).
2021 | Journal Article | LibreCat-ID: 51201
Clinching in In-situ CT – Experimental Study on Suitable Tool Materials
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, ESAFORM 2021 (2021).
2021 | Journal Article | LibreCat-ID: 51198
Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2021).
LibreCat
| DOI
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius, Journal of Advanced Joining Processes 5 (2021).
2020 | Journal Article | LibreCat-ID: 51203
Clinching in in-situ CT—A numerical study on suitable tool materials
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020).
LibreCat
| DOI
D. Köhler, R. Kupfer, M. Gude, Journal of Advanced Joining Processes 2 (2020).
2025 | Journal Article | LibreCat-ID: 58807
Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12
M. Neuser, P.K. Holtkamp, K.-P. Hoyer, F. Kappe, S. Yildiz, M. Bobbert, G. Meschut, M. Schaper, The Journal of Materials: Design and Applications, Part L (2025).
LibreCat
| DOI
M. Neuser, P.K. Holtkamp, K.-P. Hoyer, F. Kappe, S. Yildiz, M. Bobbert, G. Meschut, M. Schaper, The Journal of Materials: Design and Applications, Part L (2025).