Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
165 Publications
2024 | Journal Article | LibreCat-ID: 51737
G. Kullmer, D. Weiß, and B. Schramm, “An alternative and robust formulation of the fatigue crack growth rate curve for long cracks,” Engineering Fracture Mechanics, vol. 296, Art. no. 109826, 2024, doi: 10.1016/j.engfracmech.2023.109826.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 53394
G. Kullmer, D. Weiß, and B. Schramm, “Weiterentwicklung des Exponentialansatzes zur Beschreibung von Rissfortschrittskurven,” presented at the 56. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit , Kassel, 2024, doi: 10.48447/BR-2024-369.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 36800 | 
M. Busch and T. Hausotte, “Simulation-based investigation of the metrological interface structural resolution capability of X-ray computed tomography scanners,” Journal of Sensors and Sensor Systems, vol. 12, no. 1, pp. 1–8, 2023, doi: 10.5194/jsss-12-1-2023.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 38509
A. Brosius, L. Ewenz, R. Stephan, and M. Zimmermann, “Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser Doppler Vibrometers,” in Tagung Werkstoffprüfung 2022, Dresden, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 38511
L. Ewenz, M. Kuczyk, S. Schöne, and M. Zimmermann, “Ableitung flacher Probengeometrien zur Abbildung mehraxialer Spannungszustände in Clinchverbindungen unter zyklischer Beanspruchung,” in Tagung Werkstoffprüfung 2022, Dresden, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 38507
L. Ewenz, R. Kühne, S. Schöne, and M. Zimmermann, “Untersuchungen zum Geometrie- und Frequenzeinfluss bei der Ermittlung zyklischer Kennwerte geclinchter Überlappverbindungen,” in Tagung Werkstoffprüfung 2022, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46476
S. Wituschek, L. Elbel, and M. Lechner, “Versatile self-piercing riveting with a tumbling superimposed punch,” 2023, doi: 10.21741/9781644902479-122.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 51190
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Comparison of ex- and in-situ investigations of clinched single-lap shear specimens,” 2023, doi: 10.21741/9781644902417-20.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 51194
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point,” in Lecture Notes in Production Engineering, Cham: Springer International Publishing, 2023.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43462
M. Böhnke et al., “A calibration method for failure modeling in clinching process simulations,” 2023, doi: 10.21741/9781644902417-34.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43463
J. Friedlein et al., “Influence of plastic orthotropy on clinching of sheet metal,” 2023, doi: 10.21741/9781644902417-17 .
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52831 |
L. Butzhammer, F. Kappe, G. Meschut, and T. Hausotte, “Dynamic conformity assessment for joining force monitoring using Bayes filters,” 2023, doi: 10.21741/9781644902417-48.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 52821 |
S. Wituschek, F. Kappe, G. Meschut, and M. Lechner, “Combination of versatile self-piercing riveting processes,” 2023, doi: 10.21741/9781644902417-16.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 51739
D. Weiß, T. Duffe, M. Buczek, G. Kullmer, and B. Schramm, “Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss,” presented at the Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin, 2023, doi: 10.48447/WP-2023-244.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34207
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34213
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34219
D. Römisch, M. Kraus, and M. Merklein, “Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 236, no. 6, pp. 1187–1202, 2022, doi: 10.1177/14644207221081408.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34223
J. Popp, D. Römisch, M. Merklein, and D. Drummer, “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures,” Applied Sciences, vol. 12, no. 10, Art. no. 4962, 2022, doi: 10.3390/app12104962.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34225
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, and M. Gude, “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation,” Materials, vol. 15, no. 15, Art. no. 5454, 2022, doi: 10.3390/ma15155454.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34221
F. Binder and T. Hausotte, “Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie,” tm - Technisches Messen, vol. 89, no. s1, pp. 20–24, 2022, doi: 10.1515/teme-2022-0065.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34220
M. Busch, L. Butzhammer, and T. Hausotte, “Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen,” tm - Technisches Messen, vol. 89, no. s1, pp. 83–88, 2022, doi: 10.1515/teme-2022-0061.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34415
C. Zirngibl, C. Sauer, B. Schleich, and S. Wartzack, “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections,” 2022, doi: 10.1115/detc2022-89172.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34417 |
C. Zirngibl, B. Schleich, and S. Wartzack, “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels,” AI, vol. 3, no. 4, pp. 990–1006, 2022, doi: 10.3390/ai3040059.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 30626
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius, “Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis,” Journal of Advanced Joining Processes, vol. 5, p. 100089, 2022, doi: 10.1016/j.jajp.2021.100089.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30625
J. Popp and D. Drummer, “Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating,” Journal of Advanced Joining Processes, vol. 5, p. 100084, 2022, doi: 10.1016/j.jajp.2021.100084.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30624
L. Ewenz, M. Kuczyk, and M. Zimmermann, “Effect of the tool geometry on microstructure and geometrical features of clinched aluminum,” Journal of Advanced Joining Processes, vol. 5, 2022, doi: 10.1016/j.jajp.2021.100091.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30622
B. Gröger, V. Würfel, A. Hornig, and M. Gude, “Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process,” Journal of Advanced Joining Processes, vol. 5, 2022, doi: 10.1016/j.jajp.2022.100100.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30717
S. Wituschek and M. Lechner, “Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process,” Production Engineering, 2022, doi: 10.1177/14644207221080068.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30629
C. Steinfelder, J. Acksteiner, C. Guilleaume, and A. Brosius, “Analysis of the interactions between joint and component properties during clinching,” Production Engineering, 2022, doi: 10.1007/s11740-021-01102-x.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30640
M. Busch and T. Hausotte, “Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography,” Production Engineering, 2022, doi: 10.1007/s11740-021-01100-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30628
J. Kalich and U. Füssel, “Design of clinched joints on the basis of binding mechanisms,” Production Engineering, 2022, doi: 10.1007/s11740-022-01108-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30627
J. Friedlein, J. Mergheim, and P. Steinmann, “Observations on additive plasticity in the logarithmic strain space at excessive strains,” International Journal of Solids and Structures, vol. 239–240, p. 111416, 2022, doi: 10.1016/j.ijsolstr.2021.111416.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34253 |
S. Harzheim, L. Ewenz, M. Zimmermann, and T. Wallmersperger, “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100130, 2022, doi: 10.1016/j.jajp.2022.100130.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34252 |
A. T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, and M. Zimmermann, “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints,” Metals, vol. 12, no. 9, Art. no. 1514, 2022, doi: 10.3390/met12091514.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34249 |
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Robustness Analysis of Pin Joining,” Journal of Manufacturing and Materials Processing, vol. 6, no. 5, Art. no. 122, 2022, doi: 10.3390/jmmp6050122.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34255 |
A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 146, 2022, doi: 10.3390/jmmp6060146.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34248 |
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 127, 2022, doi: 10.3390/jmmp6060127.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34247 |
B. Gröger et al., “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites,” Polymers, vol. 14, no. 22, Art. no. 5039, 2022, doi: 10.3390/polym14225039.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34256 |
J. Gerritzen, A. Hornig, B. Gröger, and M. Gude, “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters,” Journal of Composites Science, vol. 6, no. 10, Art. no. 318, 2022, doi: 10.3390/jcs6100318.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34214
J. Schaude and T. Hausotte, “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation,” Nanomanufacturing and Metrology, vol. 5, no. 2, pp. 139–148, 2022, doi: 10.1007/s41871-022-00143-9.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34251 |
J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, and U. Füssel, “Long-Term Behavior of Clinched Electrical Contacts,” Metals, vol. 12, no. 10, Art. no. 1651, 2022, doi: 10.3390/met12101651.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34254 |
B. Gröger, J. Wang, T. Bätzel, A. Hornig, and M. Gude, “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study,” Materials, vol. 15, no. 20, Art. no. 7241, 2022, doi: 10.3390/ma15207241.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34257 |
S. Harzheim, M. Hofmann, and T. Wallmersperger, “Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion,” Acta Mechanica, vol. 233, no. 11, pp. 4427–4439, 2022, doi: 10.1007/s00707-022-03326-z.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34250 |
U. Füssel, S. Schlegel, G. Reschke, and J. Kalich, “Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements,” 2022, doi: 10.3390/engproc2022026005.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34280
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined in situ CT and Acoustic Analysis during Clinching,” in Key Engineering Materials, 2022, vol. 926, pp. 1489–1497, doi: 10.4028/p-32330d.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34414 |
C. Zirngibl, B. Schleich, and S. Wartzack, “Robust estimation of clinch joint characteristics based on data-driven methods,” The International Journal of Advanced Manufacturing Technology, 2022, doi: 10.1007/s00170-022-10441-7.
LibreCat
| DOI
| Download (ext.)