Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
166 Publications
2021 | Mastersthesis | LibreCat-ID: 42989
Dewerth, Mats-Ole, and Moritz Neukötter. Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit). 2021.
LibreCat
2021 | Bachelorsthesis | LibreCat-ID: 43004
Hütte, Marvin, and Moritz Neukötter. Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer. 2021.
LibreCat
2021 | Mastersthesis | LibreCat-ID: 43005
Gawlikowicz, Roland. Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit). 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24160 | 
Kletetzka, Ivo, et al. “Laser Sintering Design Guidelines for Media Transmitting Components.” Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, vol. 32, Laboratory for Freeform Fabrication and University of Texas, 2021, doi:http://dx.doi.org/10.26153/tsw/17548.
LibreCat
| DOI
| Download (ext.)
2021 | Bachelorsthesis | LibreCat-ID: 51710
Wortmeier, Andreas, and Janis Beimdiek. Charakterisierung der Abscheideeffizienz eines kombinierten Abgasreinigungsverfahrens zur simultanen Minderung von partikulären und gasförmigen Emissionen. 2021.
LibreCat
2021 | Bachelorsthesis | LibreCat-ID: 51716
Buff, Jasmin, and Janis Beimdiek. Experimentelle Untersuchung zur Abscheidung von Stäuben aus häuslichen Holzfeuerungsanlagen mittels Schüttschichtfiltration. 2021.
LibreCat
2021 | Mastersthesis | LibreCat-ID: 51665
Bommidi, Karthik, and SathishKumar Ponusamy. Feasibility Study of a New Static-Mechanical Rounding of Polymer Particles for Selective Laser Sintering (Studienarbeit). 2021.
LibreCat
2020 | Report | LibreCat-ID: 24943
Menge, Dennis, et al. Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 24182
Haist, Michael, et al. “Interlaboratory Study on Rheological Properties of Cement Pastes and Reference Substances: Comparability of Measurements Performed with Different Rheometers and Measurement Geometries.” Materials and Structures, 2020, doi:10.1617/s11527-020-01477-w.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 22182
Kummert, Christina, et al. “Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2020, pp. 735–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 21949 |
Haist, Michael, et al. “Interlaboratory Study on Rheological Properties of Cement Pastes and Reference Substances: Comparability of Measurements Performed with Different Rheometers and Measurement Geometries.” Materials and Structures, 2020, doi:10.1617/s11527-020-01477-w.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 21948 |
Pawelczyk, Sebastian, et al. “Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures.” Materials, 467, 2020, doi:10.3390/ma13020467.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 21514
Sonnenrein, Gerrit, et al. “Improving the Performance of Household Refrigerating Appliances through the Integration of Phase Change Materials in the Context of the New Global Refrigerator Standard IEC 62552:2015.” International Journal of Refrigeration, vol. 119, Elsevier, 2020, pp. 448–56, doi:10.1016/j.ijrefrig.2020.07.025.
LibreCat
| DOI
2020 | Bachelorsthesis | LibreCat-ID: 51660
Tissen, Anton, and SathishKumar Ponusamy. Untersuchung Eines Neuen Thermischen Partikelverrundungsprozesses. 2020.
LibreCat
2019 | Dissertation | LibreCat-ID: 24753
Josupeit, Stefan. On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process. Shaker Verlag GmbH, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24758
Lohn, Johannes. Zum Laserstrahlschmelzen neuer Kunststoffmaterialien. Shaker Verlag GmbH, 2019.
LibreCat
| Download (ext.)
2019 | Report | LibreCat-ID: 24628
Menge, Dennis, et al. FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen. 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22198
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Methodik Zur Qualifizierung Des Lasersinter Prozesses Für Die Serienfertigung.” Proceedings of the 16th Rapid.Tech Conference, 2019, doi:10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Dissertation | LibreCat-ID: 42129
Zhen, Xinz. Numerische Und Experimentelle Untersuchungen Zur Aerosolbildung Aus Binären Dampfgemischen von Wasser Und Glycerin. 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22202
Klippstein, Sven Helge, et al. “Devolopment, Production and Post-Processing of a Topology Optimized Aircraft Bracket .” 30th Annual International Solid Freeform Fabrication Symposium, vol. 30, 2019, pp. 1932–45.
LibreCat
| Download (ext.)
2018 | Conference Paper | LibreCat-ID: 22183 |
Menge, Dennis, et al. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 687–97.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 22196
Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, Springer, 2018, pp. 425–30, doi:10.1007/s11837-017-2658-2.
LibreCat
| DOI
2018 | Patent | LibreCat-ID: 29824
Schmid, Hans-Joachim, and David Rasche. Bestimmung von Nanopartikeleigenschaften Eines Aerosols. 2018.
LibreCat
| Files available
2018 | Dissertation | LibreCat-ID: 42128
Pieper, Sven. Confinement Induced Segregation Effects in Suspension Rheology. Shaker Verlag, 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 42130
Grimm, Philipp. Entwicklung einer Prozesskette zum flüssig-flüssig Phasentransfer nanoskaliger Partikeln. 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 42131
Dörmann, Michael. Zur Modellierung von Kapillarbrücken zwischen nanoskaligen Partikeln. 2018.
LibreCat
2017 | Book Chapter | LibreCat-ID: 23759
Menge, Dennis, et al. “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, edited by Hans Albert Richard et al., Springer Vieweg, 2017, pp. 105–20, doi:10.1007/978-3-658-17780-5.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22195
Josupeit, Stefan, and Hans-Joachim Schmid. “Experimental Analysis and Modeling of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual Thermal Histories.” Journal of Applied Polymer Science, vol. 134, no. 42, Wiley, 2017, doi:10.1002/app.45435.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, Tobias, et al. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–44, doi:10.3139/9783446454606.024 .
LibreCat
| DOI
2017 | Dissertation | LibreCat-ID: 21950
Jesinghausen, Steffen. Rheo-PIV nichtkolloidaler Suspensionen: Strukturelle Untersuchungen der Strömungsentwicklung in Schlitzdüsen mit Fokus auf Wandgleiten. Shaker, 2017.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22180
Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22185
Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.” Additive Manufacturing, vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:10.1016/j.addma.2016.06.003.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22190
Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .” Fraunhofer Direct Digital Manufacturing Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22194
Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 21947
Jesinghausen, Steffen, et al. “Direct Measurement of Wall Slip and Slip Layer Thickness of Non-Brownian Hard-Sphere Suspensions in Rectangular Channel Flows.” Experiments in Fluids, 2016, doi:10.1007/s00348-016-2241-6.
LibreCat
| DOI
| Download (ext.)
2016 | Dissertation | LibreCat-ID: 40488
Schiller, Sascha. Zur Feinstaubabscheidung aus Holzfeuerungsanlagen mit precoatierten Oberflächenfiltern. Shaker Verlag, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 25140
Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal Suspensions in a Parallel Plate Rheometer under Steady Shear.” Journal of Non-Newtonian Fluid Mechanics, 2016, pp. 1–7, doi:10.1016/j.jnnfm.2016.04.004.
LibreCat
| DOI
2015 | Dissertation | LibreCat-ID: 24751
Rüsenberg, Stefan. Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren. Shaker Verlag GmbH, 2015.
LibreCat
| Download (ext.)
2015 | Conference Paper | LibreCat-ID: 22178
Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22179
Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22187
Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22189
Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22199
Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.” Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22395
Lieneke, Tobias, et al. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Proceedings of the Rapid Tech 2015, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22396
Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22176
Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22177
Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature Measurement of Laser Sintered Part Cakes.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22184
Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence on Part Quality Characteristics.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no. 3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 22186
Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer Laser Sintering Process .” Advances in Mechanical Engineering, vol. 6, SAGE Publications, 2014, pp. 1687–8140, doi:10.1155/2014/185374.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22193
Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser Sintering Cooling Process.” International Conference on Additive Technologies, vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22203
Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22175
Josupeit, Stefan, et al. “A Material-Based Quality Concept for Polymer Laser Sintering.” 24th Annual International Solid Freeform Fabrication Symposium , vol. 24, 2013, pp. 44–54, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22192
Rüsenberg, Stefan, and Hans-Joachim Schmid. “Advanced Characterization Method of Nylon 12 Materials for Application in Laser Sinter Processing.” International Conference of the Polymer-Processing-Society (PPS), vol. 29, 2013, doi:10.1063/1.4873877.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22197
Josupeit, Stefan, et al. “Mechanische Und Rheologische Untersuchungen Neuer Laser Sinter Materialien.” Merseburger Rapid Prototyping Forum, vol. 7, 2013, doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22201
Rüsenberg, Stefan, et al. “Additiv versus Konventionell: Benchmarking Am Beispiel Eines Designs Aus Der Luftfahrtindustrie.” RapidTech, 2013.
LibreCat
2013 | Dissertation | LibreCat-ID: 42132
Gerkens, Stefan. In-situ Strukturcharakterisierung von CNT in polymerbasierten Nanokompositen Methodenentwicklung und Anwendung. 2013.
LibreCat
2012 | Conference Paper | LibreCat-ID: 22174
Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts Along the Process Chain.” 23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 1024–44, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22204
Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result of Multitude of Parameters.” The European Forum on Additive Manufacturing, vol. 17, 2012, doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 22188
Rüsenberg, Stefan, et al. “Mechanical and Physical Properties - A Way to Asses Quality of Laser Sintered Parts.” 22th Annual International Solid Freeform Fabrication Symposium, vol. 22, 2011, pp. 239–51, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf.
LibreCat
| DOI
2011 | Book | LibreCat-ID: 22191
Rüsenberg, Stefan, et al. Porosity as a Key to Increase Material Properties of Laser Sintered Parts. 2011, pp. 531–38, doi:10.1201/b11341.
LibreCat
| DOI
2007 | Journal Article | LibreCat-ID: 29827
Schmid, Hans-Joachim. “Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter.” Gefahrstoffe, Reinhaltung der Luft. Air Quality Control, vol. 67, no. 4, 2007.
LibreCat
2002 | Journal Article | LibreCat-ID: 29826
Schmid, Hans-Joachim, and Wolfgang Peukert. “Novel Concepts for Teaching Particle Technology .” Chemical Engineering Education, vol. 36, no. 4, 2002.
LibreCat
| Download (ext.)
2002 | Journal Article | LibreCat-ID: 29484
Schmid, Hans-Joachim. “On the Modelling of the Electro-Hydrodynamic Flow Field in Electrostatic Precipitators.” Flow, Turbulence and Combustion, vol. 68, Springer, 2002, pp. 63–89, doi:10.1023/A:1015666116174.
LibreCat
| DOI
1998 | Dissertation | LibreCat-ID: 29825
Schmid, Hans-Joachim. Zum Partikeltransport in Elektrischen Abscheidern. Shaker Verlag, 1998.
LibreCat