Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
986 Publications
2022 | Book | LibreCat-ID: 48358
Schöppner, Volker, et al. On the Wave to Successful Mixing. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
Rüppel, Annette, et al. “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution.” Polymers, vol. 14, no. 15, 3113, MDPI AG, 2022, doi:10.3390/polym14153113.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33852 | 
Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.” Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell et al., 2022, pp. 2011–18, doi:10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Newspaper Article | LibreCat-ID: 49323
Pfeifer, Florian, et al. “Strom Statt Gas: Nachhaltige Herstellung von Karosseriebauteilen.” Transforming Economies, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 49424
Merten, Mathias, et al. “Gekoppelte Simulation des resistiven Schnellerwärmens für Fertigungsprozesse mit integrierter Wärmebehandlung am Beispiel der Titanlegierung Ti-6Al-4V.” Workshop Warmblechumformung, edited by Marion Merklein, vol. 17, Lehrstuhl für Fertigungstechnologie, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 49433
Kaiser, Maximilian Alexander, et al. Heat Transfer Coefficient Investigation for Hot Die Quenching Process of Ti-6Al-4V Alloy. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 49435
Kaiser, Maximilian Alexander, et al. Isothermal Hot Forming of Titanium Sheet Metal - From Parameter Identification to Custom Parts.
LibreCat
2022 | Journal Article | LibreCat-ID: 43021
Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 7, 100137, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100137.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 44302
Moritzer, Elmar, et al. “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics.” Journal of Composites Science , 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33853 |
Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.” Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell et al., 2022, pp. 1844–58, doi:10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 36332 |
Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29505
Neuser, Moritz, et al. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01106-1.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 25272
Engelkemeier, Katja, et al. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” ChemElectroChem, 2021, pp. 2155–68, doi:10.1002/celc.202100216.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 25576
Moritzer, Elmar, et al. Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting. 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 25577
Moritzer, Elmar, et al. “Fügen von Thermoplastischen Composites Mit Metallteilen Durch Spritznieten.” Joining Plastics, vol. 15, no. 3–4, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 28440 |
Triebus, Marcel, et al. “Forming Simulation of Tailored Press Hardened Parts.” 13th European LS-DYNA Conference 2021, 2021.
LibreCat
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
Tröster, Thomas, et al. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24095 |
Moritzer, Elmar, et al. “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen.” Kunststoffland NRW report, vol. 2021, no. 2, 2021, pp. 42–43.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24161
Moritzer, Elmar, and Michael Kröker. “Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen.” CU reports, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24165
Moritzer, Elmar, and Michael Kröker. Simulative Analysis of the Filling Process in the 2K GITBlow Process on Organo Sheets. 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24168
Moritzer, Elmar, and Julian Wächter. “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität.” Plastverarbeiter, no. 04, 2021, pp. 30–32.
LibreCat
2021 | Journal Article | LibreCat-ID: 24283
Malatyali, Hatice, et al. “A Model for the Carbon Fiber Breakage along the Twin‐screw Extruder.” SPE Polymers, 2021, pp. 145–52, doi:10.1002/pls2.10040.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24315
Malatyali, Hatice, et al. “The Influence of Process Conditions on the Fiber Length Reduction for Recycled Carbon Fibers.” SPE ANTEC, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24316
Malatyali, Hatice, et al. “Reproducibility Analysis of Fiber Length Measurements during Processing with Twin Screw Extruders.” SPE ANTEC, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24372
Gevers, Karina, and Volker Schöppner. “Lebensdauer vorhersagen?” K-Zeitung, no. 1–2.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
Gevers, Karina, et al. Heated Tool Butt Welding of Two Different Materials – Established Methods versus Artificial Intelligence. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
Arndt, Theresa, and Volker Schöppner. Development of Scale up Rules for Quasi-Simultaneous Laser Transmission Welding of Thermoplastics. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24528
Hopp, Matthias, and Frederik Marvin Mühlhoff. “Separation of Multi-Component Parts for Mechanical Recycling – An Approach to Produce Hard-Soft Combinations with a Better Recyclability.” 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
Moritzer, Elmar, et al. “Kleine Tropfen, große Wirkung.” Kunststoffe, no. 9/2021, 2021, pp. 88–90.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26628
Malatyali, Hatice, and Volker Schöppner. “Investigation of Shear Rates in Twin-Screw Extruders Using CFD Simulations.” 36th PPS, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26629
Malatyali, Hatice, et al. “Investigation of the Influence of Process and Screw Configurations on Fiber Length Distribution for Recycled Carbon Fiber.” 36th PPS, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26630
Altepeter, Matthias, et al. Analysis and Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder. 2021.
LibreCat
2021 | Book (Editor) | LibreCat-ID: 26996
Koch, Rainer, et al., editors. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Shaker Verlag, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 27366
Moritzer, Elmar, and Felix Hecker. “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen.” Jahresmagazin Kunststofftechnik, 2021, pp. 70–75.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 21125
Kismann, Michael, et al. “Ordered Arrays of Si Nanopillars with Alternating Diameters Fabricated by Nanosphere Lithography and Metal-Assisted Chemical Etching.” Materials Science in Semiconductor Processing, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21374
Emmrich, Daniel, et al. “Scanning Transmission Helium Ion Microscopy on Carbon Nanomembranes.” Beilstein Journal of Nanotechnology, 2021, pp. 222–31, doi:10.3762/bjnano.12.18.
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh, Steffen Rainer, et al. Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis. 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23977
Tölle, Lisa, and Matthias Hopp . “Recycling Faserverstärkter Kunststoffe Zu Ende Gedacht… .” Kunststoffland NRW Report , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 20857
Camberg, Alan Adam, et al. Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing. Springer, 2021, doi:https://doi.org/10.1007/978-3-662-62924-6_28.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20858
Camberg, Alan Adam, et al. A New Numerical Method for Potential Anaylsis and Design of Hybrid Components from Full Vehicle Simulations: Implementation and Component Design. Springer, 2021, doi:https://doi.org/10.1007/978-3-662-62924-6_30.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22518 |
Triebus, Marcel, et al. “A New Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.” IOP Conference Series: Materials Science and Engineering, 012052, IOP Publishing Ltd, 2021, doi:10.1088/1757-899x/1157/1/012052.
LibreCat
| DOI
| Download (ext.)
2021 | Report | LibreCat-ID: 29807
Linnig, Caterina, and Thomas Tröster. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25283
Moritzer, Elmar, et al. “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming.” Proceedings of 36th Annual Meeting of Polymer Processing Society (PPS-36).
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 23944
Moritzer, Elmar, and Maximilian Richters. “Characterization of Wood-Filled Thermoplastic Polyurethane for the Injection Modling Process.” Journal of Applied Polymer Science, Wiley , 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23948
Moritzer, Elmar, et al. “Mit Dem Schraubblind-Durchsetznieten Metallteile Mit Composites Bei Einseitiger Zugänglichkeit Verbinden.” Joining Plastics, 2021.
LibreCat
2021 | Book | LibreCat-ID: 22032
Moritzer, Elmar, et al. Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021, pp. 112–29, doi:10.1007/978-3-030-54334-1.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24162
Moritzer, Elmar, et al. “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK.” Macromolecular Symposia, vol. 395, no. 1, Wiley, 2021, doi:10.1002/masy.202000269.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24681
Moritzer, Elmar, and Christian Schumacher. “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting.” Macromolecular Symposia, vol. 395, no. 1, 2000275, 2021, doi:10.1002/masy.202000275.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24554
Moritzer, Elmar, et al. “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems.” 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23867
Bialaschik, Max, et al. “Influence of Material Degradation on Weld Seam Quality in Hot Gas Butt Welding of Polyamides.” Welding in the World, 2021, pp. 1161–69, doi:10.1007/s40194-021-01108-0.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24555
Moritzer, Elmar, et al. “Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters.” Polymer Composites, vol. 42, no. 11, 2021, pp. 6065–79, doi:10.1002/pc.26285.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24131
Wu, Tao, et al. “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components.” Metals, 335, 2021, doi:10.3390/met11020335.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh, Steffen Rainer, et al. “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis.” Metals, 156, 2021, doi:10.3390/met11010156.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24130
Magnier, A., et al. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.” Polymer Testing, 107146, 2021, doi:10.1016/j.polymertesting.2021.107146.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 31744
Moritzer, Elmar, et al. “Designing of Thermosetting Plastic Components for Direct Screwing - Auslegung von Duroplastbauteilen Zur Direktverschraubung.” Joining Plastics, 2021, pp. 94–103.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31740
Moritzer, Elmar, and Maximilian Richters. “ Characterization of Wood-Filled Thermoplastic Polyurethanes for the Injection Molding Process.” Journal of Applied Polymer Science, vol. 138, no. 38, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31760
Moritzer, Elmar, et al. “Entwicklung Der Spritzniettechnik Als Werkstoffgerechtes Fügeverfahren Für Hybride Strukturen.” 11. Fügetechnisches Gemeinschaftskolloquium, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31762
Moritzer, Elmar, et al. “Er Kommt Auf Die Korngröße an, Mikrogranulat Verbessert Die Verteilung Feindisperser Füllstoffe in Der Direktcompoundierung.” Kunststoffe, 2021, pp. 24–27.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31758
Schöppner, Volker, and Jan Hendrik Martens. “Eine Runde Sache.” Kunststoffe, 2021, pp. 91–93.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31767
Hopp, Matthias, and Lisa Tölle. “Influence of Fiber Content on the Fiber Dust Formation During Shredding for Mechanical Recycling of Different Glass and Carbon Fiber Reinforced Thermoplastics.” 36th International Conference of Polymer Processing Society (PPS), 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31765
Moritzer, Elmar, et al. “Fügeelement Angespritzt - Einfluss Auf Die Verbundfestigkeit Zwischen Organoblech Und Schraubblindniet Untersucht.” Kunststoffe, 2021, pp. 42–45.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31763
Moritzer, Elmar, et al. “Effect of Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers in Polyurethane Vacuum Casting.” ACS Omega, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31774
Moritzer, Elmar, et al. “ INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR.” 23rd International Conference Materials, 2021, pp. 58–67.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31776
Schöppner, Volker, and Karina Gevers. “ Lebensdauer Vorhersagen?” K-Zeitung, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31775
Moritzer, Elmar. “ Kühlen Mit Dem Wärmerohr.” Kunststoffe, 2021, pp. 64–67.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31777
Schöppner, Volker, et al. “Material Degradation of Polypropylene on the Co-Rotating Twin Screw Extruder.” 36th International Conference of the Polymer Processing Society (PPS), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31781
Moritzer, Elmar, and Franziska Isabelle Bürenhaus. “Untersuchung Der Faserlängenabnahme von Kurz- Und Langglasfaserverstärk-Ten Thermoplasten Im Spritzgießprozess.” 27. Techomer - Fachtagung Über Verarbeitung Und Anwendung von Polymeren, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31778
Moritzer, Elmar, et al. “Molding on a Joining Element - Study of the Factors Influencing the Strength of the Bond between a Thermoplastic Composite and a Screw-in Blind Rivet.” Kunststoffe International, 2021, pp. 29–32.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31779
Hopp, Matthias, et al. “Reduzierung Der Faserstaubentstehung Beim Mechanischen Recycling - Zerkleinern von Carbonfaserverstärkten Polycarbonaten Mit Unterschiedlichen Verstärkungsformen.” Gummi Fasern Kunststoffe, 2021, pp. 2–7.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31780
Moritzer, Elmar, et al. “Silicone Mold Accuracy in Polyurethane Vacuum Casting.” Macromolecular Symposia, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31782
Schöppner, Volker, and Dennis Kleinschmidt. “Viskoelastische Materialmodellierung in Strömungssimulationen.” 27. Techomer - Fachtagung Über Verarbeitung Und Anwendung von Polymeren, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31785
Schöppner, Volker, et al. “Warmgasstumpfschweißen - Einfluss Des Werkzeugdesigns Und Des Verwendeten Prozessgases Auf Das Erwärm- Und Schweißverhalten.” Technomer, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31784
Schöppner, Volker, et al. “Vorteilhaftes Prozessverhalten von Wave-Schnecken in Der Einschneckenextrusion.” Technomer 2021, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31786
Schöppner, Volker, et al. “Warmgasstumpfschweißen von Kunststoffen.” Joining Plastics, 2021, pp. 162–69.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 31771
Moritzer, Elmar, and Franziska Isabelle Bürenhaus. “Investigation of Fiber Orientation and Its Influence on Fiber Length Degradation in Simple Shear Flow for Glass Fiber Reinforced Polypropylene.” 36th International Conference of the Polymer Processing Society (PPS), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24439
Gräßler, Iris, and Philipp Hesse. Decision Support for Product Specific Recycling. Edited by ETI - The European Technology Institute, The University of Malta, 2021, pp. 37–41.
LibreCat
2021 | Journal Article | LibreCat-ID: 26854
Moritzer, Elmar, and Felix Flachmann. “Die Fließfront darf nicht brechen.” Kunststoffe, vol. 12, 2021, pp. 42–44.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31707
Moritzer, Elmar, et al. “Direktverschraubung von Duroplasten Eine Wirtschaftliche Lösung.” Plastverarbeiter, no. 71, 2021, pp. 56–60.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31725
Moritzer, Elmar, et al. “Anomalous Bulk Diffusion of Methylene Diphenyl Diisocyanate in Silicone Elastomer.” International Journal of Heat and Mass Transfer, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31719
Schöppner, Volker, and Sascha Vogtschmidt. “ Analyse Des Erwärm- Und Umstellverhaltens Beim Schweißen von Hochtemperaturbeständigen Kunststoffen.” DVS CONGRESS, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21726 |
Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development of Hybrid Materials.” 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 33895
Camberg, Alan Adam, et al. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials, vol. 14, no. 17, 5106, MDPI AG, 2021, doi:10.3390/ma14175106.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 31750
Köllermeier, Jonas, and Volker Schöppner. “Development of a Dynamic Strategy to Determine the Optimal Barrel Temperature of Single Screw Extruders.” 36th International Conference of the Polymer Processing Society (PPS), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 28415
Hanses, Hendrik, and Ilona Horwath. “PROJECT FOR THE DEVELOPMENT OF OPERATIONAL AND DEMAND-ORIENTED FIREFIGHTING EQUIPMENT.” Book of Abstracts 37th Danubia Adria Symposium on Advances in Experimental Mechanics, edited by Helmut J. Holl, 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37579
Camberg, Alan Adam. Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe. Shaker Verlag, 2021, doi:10.2370/9783844082715.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 37586
Huber, Johannes. Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen. Shaker Verlag, 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37584
Pöhler, Simon. Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment. Shaker Verlag, 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37631
Westhues, Tobias Thomas. Ansatz Zur Beschreibung von Unregelmäßig Gefügten Kunststofffilamenten Aus Thermoplasten in Wirrmattenstrukturen Unter Mechanischer Belastung Zur Substitution von Schaumstoffen in Polstern Und Matratzen. 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37630
Wittke, Marius. Beitrag Zur Verfahrenstechnischen Entwicklung Der Direktcompoundierung Im Spritzgießprozess Mit Sequentiell Arbeitenden Kolbenspritzeinheiten. 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37629
Wortmann, Martin. Untersuchung Und Prävention Der Alterung von Silikon-Gießwerkzeugen Beim Polyurethan-Vakuumgießen. 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37634
Jilg, Jannik Richard. Beiträge Zur Verfahrenstechnischen Entwicklung Der Spritzgießdirektcompoundierung (SGDC). 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37633
Stüker, Daniel. Nicht-Isotherme Druck-Durchsatzberechnung von Kautschukextrudern. 2021.
LibreCat
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29089
Westermann, Hendrik, et al. “Constitutive Modeling of Viscoplasticity Including Phase Transformations for Graded Thermo‐mechanical Processing.” PAMM, 2021, doi:10.1002/pamm.202100041.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21708
Lenz, Peter, and Rolf Mahnken. “Damage Simulation of Thermo‐chemo‐elasto‐plastic Fibre Reinforced Composites Using Mean‐field Homogenization Methods.” PAMM, 2021, doi:10.1002/pamm.202000265.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24392
Penner, Eduard, et al. “An Uncertainty Model for the Curing Process of Transversely Fiber Reinforced Plastics.” PAMM, 2021, doi:10.1002/pamm.202000178.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24384
Westermann, Hendrik, and Rolf Mahnken. “Constitutive Modeling of Dynamic Recrystallization Coupled to Viscoplasticity.” PAMM, 2021, doi:10.1002/pamm.202000186.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24397
Henkes, Alexander, et al. “A Deep Learning Driven Uncertain Full‐field Homogenization Method.” PAMM, 2021, doi:10.1002/pamm.202000180.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24390
Mahnken, Rolf, and Hendrik Westermann. “A Non-Equilibrium Thermodynamic Framework for Viscoplasticity Incorporating Dynamic Recrystallization at Large Strains.” International Journal of Plasticity, 102988, 2021, doi:10.1016/j.ijplas.2021.102988.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21681
Penner, Eduard, et al. “Fuzzy and Stochastic Approach Applied to Rubber like Materials.” Safety and Reliability, 2021, pp. 1–19, doi:10.1080/09617353.2020.1858678.
LibreCat
| DOI