Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
599 Publications
2021 | Conference Paper | LibreCat-ID: 24096 |
Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming
E. Moritzer, F. Hecker, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 1268–1275.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 1268–1275.
2020 | Dissertation | LibreCat-ID: 24771
Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren
F. Knoop, Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren, Shaker Verlag, Düren, 2020.
LibreCat
| Download (ext.)
F. Knoop, Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren, Shaker Verlag, Düren, 2020.
2020 | Dissertation | LibreCat-ID: 24773
Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte
M. Fischer, Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte, Shaker Verlag, Düren, 2020.
LibreCat
| Download (ext.)
M. Fischer, Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte, Shaker Verlag, Düren, 2020.
2020 | Newspaper Article | LibreCat-ID: 24133
Der richtige Dreh für Simulationen
V. Schöppner, L. Austermeier, K. Dietl, Blasformen & Extrusionswerkzeuge (2020).
LibreCat
V. Schöppner, L. Austermeier, K. Dietl, Blasformen & Extrusionswerkzeuge (2020).
2020 | Newspaper Article | LibreCat-ID: 24134
SKZ simuliert Doppelschnecke
V. Schöppner, L. Austermeier, K. Dietl, K Zeitung (2020).
LibreCat
V. Schöppner, L. Austermeier, K. Dietl, K Zeitung (2020).
2020 | Journal Article | LibreCat-ID: 24183
Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent
E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, J. Mirasol, JOURNAL OF INDUSTRIAL TEXTILES (2020) 224–239.
LibreCat
E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, J. Mirasol, JOURNAL OF INDUSTRIAL TEXTILES (2020) 224–239.
2020 | Journal Article | LibreCat-ID: 24184
2K-Haftverbunde aus originär inkompatiblen Kunststoffen
E. Moritzer, F.M. Mühlhoff, E. Krampe, E. Lochbaum, Plastverarbeiter (2020) 20–23.
LibreCat
E. Moritzer, F.M. Mühlhoff, E. Krampe, E. Lochbaum, Plastverarbeiter (2020) 20–23.
2020 | Conference Paper | LibreCat-ID: 24201
Additive Manufactured Heat Pipe Injection Mould Element
E. Moritzer, S. Kartelmeyer, V. Hüttemann, in: Direct Digital Manufacturing Conference 2020, Berlin, 2020.
LibreCat
E. Moritzer, S. Kartelmeyer, V. Hüttemann, in: Direct Digital Manufacturing Conference 2020, Berlin, 2020.
2020 | Conference Paper | LibreCat-ID: 24203
Additiveteile Direktverschrauben
E. Moritzer, J. Hillemeyer, in: 6. Fachkonferenz 3D-Druck in Der Automobielindustrie, Hamburg, 2020.
LibreCat
E. Moritzer, J. Hillemeyer, in: 6. Fachkonferenz 3D-Druck in Der Automobielindustrie, Hamburg, 2020.
2020 | Misc | LibreCat-ID: 24204
ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION
V. Schöppner, M. Dörner, C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION, 2020.
LibreCat
V. Schöppner, M. Dörner, C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION, 2020.
2020 | Conference Paper | LibreCat-ID: 24206
Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben
E. Moritzer, J. Hillemeyer, in: 10. Gemeinschaftskolloquium, 2020.
LibreCat
E. Moritzer, J. Hillemeyer, in: 10. Gemeinschaftskolloquium, 2020.
2020 | Journal Article | LibreCat-ID: 24207
Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion)
V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, G. Steinbichler, Polymers (2020) 1900.
LibreCat
V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, G. Steinbichler, Polymers (2020) 1900.
2020 | Conference Paper | LibreCat-ID: 24213
CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS
E. Moritzer, M. Wittke, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, 2020.
LibreCat
E. Moritzer, M. Wittke, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, 2020.
2020 | Conference Paper | LibreCat-ID: 24228
Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics
E. Moritzer, D. Krassmann, in: 73rd Annual Assembly of the International Institute of Welding (IIW), Online, 2020.
LibreCat
E. Moritzer, D. Krassmann, in: 73rd Annual Assembly of the International Institute of Welding (IIW), Online, 2020.
2020 | Journal Article | LibreCat-ID: 24231
Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws
V. Schöppner, M. Dörner, C. Marschik, G. Steinbichler, Polymers (2020) 946.
LibreCat
V. Schöppner, M. Dörner, C. Marschik, G. Steinbichler, Polymers (2020) 946.
2020 | Journal Article | LibreCat-ID: 24232
Die Kunst der Entformung
E. Moritzer, J. Jilg, C. Schilp, N. Krempl, W. Friesenbichler, Kunststoffe (2020) 60–63.
LibreCat
E. Moritzer, J. Jilg, C. Schilp, N. Krempl, W. Friesenbichler, Kunststoffe (2020) 60–63.
2020 | Journal Article | LibreCat-ID: 24233
EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG
E. Moritzer, M. Hopp, M. Wittke, WAK Jahreszeitschrift (2020) 2–5.
LibreCat
E. Moritzer, M. Hopp, M. Wittke, WAK Jahreszeitschrift (2020) 2–5.
2020 | Journal Article | LibreCat-ID: 24234
Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, Joining Plastics (2020) 96–103.
LibreCat
E. Moritzer, D. Krassmann, Joining Plastics (2020) 96–103.
2020 | Conference Paper | LibreCat-ID: 24235
Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen
E. Moritzer, D. Krassmann, J. Brikmann, in: 10. Fügetechnisches Gemeinschaftskolloquium, 2020.
LibreCat
E. Moritzer, D. Krassmann, J. Brikmann, in: 10. Fügetechnisches Gemeinschaftskolloquium, 2020.
2020 | Conference Paper | LibreCat-ID: 24237
INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT
E. Moritzer, S. Kartelmeyer, M. Hüttemann, C. Jaroschek, in: 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA), 2020.
LibreCat
E. Moritzer, S. Kartelmeyer, M. Hüttemann, C. Jaroschek, in: 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA), 2020.
2020 | Conference Paper | LibreCat-ID: 24238
Inline Surface Activation in the multi Injection Molding Process
E. Moritzer, F.M. Mühlhoff, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, 2020.
LibreCat
E. Moritzer, F.M. Mühlhoff, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, 2020.
2020 | Journal Article | LibreCat-ID: 24239
InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen
E. Moritzer, F.M. Mühlhoff, E. Lochbaum, E. Krampe, KGK - Rubberpoint (2020) 22–26.
LibreCat
E. Moritzer, F.M. Mühlhoff, E. Lochbaum, E. Krampe, KGK - Rubberpoint (2020) 22–26.
2020 | Conference Paper | LibreCat-ID: 24242
Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability
E. Moritzer, A. Hirsch, C. Dalmer, in: Additive Manufacturing in Products and Applications (AMPA), Zurich (Switzerland), 2020, pp. 112–129.
LibreCat
E. Moritzer, A. Hirsch, C. Dalmer, in: Additive Manufacturing in Products and Applications (AMPA), Zurich (Switzerland), 2020, pp. 112–129.
2020 | Journal Article | LibreCat-ID: 24246
Kostensenkung beim Mehrkomponenten-Spritzgießen
E. Moritzer, F.M. Mühlhoff, E. Krampe, Kunststoff + Verarbeitung (2020) 92–93.
LibreCat
E. Moritzer, F.M. Mühlhoff, E. Krampe, Kunststoff + Verarbeitung (2020) 92–93.
2020 | Journal Article | LibreCat-ID: 24248
Mehr Materialkombinationen, weniger Kosten
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Kunststoffe (2020) 39–42.
LibreCat
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Kunststoffe (2020) 39–42.
2020 | Journal Article | LibreCat-ID: 24249
Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite
E. Moritzer, M. Wittke, MNWP Magazin (2020) 26–27.
LibreCat
E. Moritzer, M. Wittke, MNWP Magazin (2020) 26–27.
2020 | Journal Article | LibreCat-ID: 24250
More Material Combinations, Lower Costs
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Kunststoffe International (2020) 22–25.
LibreCat
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Kunststoffe International (2020) 22–25.
2020 | Conference Paper | LibreCat-ID: 24251
Neuartige Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, in: DVS Congress 2020, 2020.
LibreCat
E. Moritzer, D. Krassmann, in: DVS Congress 2020, 2020.
2020 | Journal Article | LibreCat-ID: 24252
Neue Maßstäbe in puncto Festigkeit und Faserlänge
E. Moritzer, M. Wittke, Plastverarbeiter (2020) 18–21.
LibreCat
E. Moritzer, M. Wittke, Plastverarbeiter (2020) 18–21.
2020 | Journal Article | LibreCat-ID: 24253
Plasma technology rationalizes 2-component processes
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Adhesion ADHESIVES + SEALANTS (2020).
LibreCat
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Adhesion ADHESIVES + SEALANTS (2020).
2020 | Journal Article | LibreCat-ID: 24256
Plasma-Technologie zur Rationalisierung von 2K-Prozessen
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Adhäsion KLEBEN & DICHTEN (2020) 16–19.
LibreCat
E. Moritzer, F.M. Mühlhoff, E. Krampe, B. Böhnke, Adhäsion KLEBEN & DICHTEN (2020) 16–19.
2020 | Conference (Editor) | LibreCat-ID: 24259
Spritznieten als neue Organoblech-Metall-Hybridfügetechnik
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neue Organoblech-Metall-Hybridfügetechnik, 2020.
LibreCat
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neue Organoblech-Metall-Hybridfügetechnik, 2020.
2020 | Conference Paper | LibreCat-ID: 24260
Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting
E. Moritzer, C. Schumacher, in: 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien), 2020.
LibreCat
E. Moritzer, C. Schumacher, in: 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien), 2020.
2020 | Journal Article | LibreCat-ID: 24312
Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien
S. Vogtschmidt, I. Fiebig, V. Schöppner, Joining Plastics (2020).
LibreCat
S. Vogtschmidt, I. Fiebig, V. Schöppner, Joining Plastics (2020).
2020 | Conference Paper | LibreCat-ID: 24317
Differences between the recycled carbon fibers especially regarding the product quality,
H. Malatyali, V. Schöppner, A. Behrendt, T. Hoemann, F. Sporkmann, F. Hanselle, in: SPE ANTEC, 2020.
LibreCat
H. Malatyali, V. Schöppner, A. Behrendt, T. Hoemann, F. Sporkmann, F. Hanselle, in: SPE ANTEC, 2020.
2020 | Conference Paper | LibreCat-ID: 24318
Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien
S. Vogtschmidt, V. Schöppner, in: DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 2020.
LibreCat
S. Vogtschmidt, V. Schöppner, in: DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 2020.
2020 | Journal Article | LibreCat-ID: 24321
Vibration welding of components with angled areas in the direction of vibration
S. Vogtschmidt, V. Schöppner, Welding in the World 64 (2020) 1843–1853.
LibreCat
S. Vogtschmidt, V. Schöppner, Welding in the World 64 (2020) 1843–1853.
2020 | Journal Article | LibreCat-ID: 24324
Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten
S. Vogtschmidt, V. Schöppner, Joining Plastics (2020).
LibreCat
S. Vogtschmidt, V. Schöppner, Joining Plastics (2020).
2020 | Newspaper Article | LibreCat-ID: 24385
Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen von Thermoplasten
T. Arndt, V. Schöppner, Joining Plastics (2020).
LibreCat
T. Arndt, V. Schöppner, Joining Plastics (2020).
2020 | Newspaper Article | LibreCat-ID: 24386
Wenn Regeln Potenziale freisetzen
T. Arndt, V. Schöppner, K-Zeitung (2020).
LibreCat
T. Arndt, V. Schöppner, K-Zeitung (2020).
2020 | Newspaper Article | LibreCat-ID: 24387
Quasi-Simultaneous Laser Transmission Welding
T. Arndt, V. Schöppner, PhotonicsViews (2020).
LibreCat
T. Arndt, V. Schöppner, PhotonicsViews (2020).
2020 | Conference Paper | LibreCat-ID: 24471
Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides
V. Schöppner, M. Bialaschik, in: 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
LibreCat
V. Schöppner, M. Bialaschik, in: 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
2020 | Conference Abstract | LibreCat-ID: 24478
From filament production to material qualification for the FDM process
E. Moritzer, J. Wächter, in: 2020.
LibreCat
E. Moritzer, J. Wächter, in: 2020.
2020 | Conference (Editor) | LibreCat-ID: 25768
Neuartige Fügetechnik für Organoblech-Hybridverbindungen
E. Moritzer, D. Krassmann, eds., Neuartige Fügetechnik Für Organoblech-Hybridverbindungen, 2020.
LibreCat
E. Moritzer, D. Krassmann, eds., Neuartige Fügetechnik Für Organoblech-Hybridverbindungen, 2020.
2020 | Conference (Editor) | LibreCat-ID: 25779
Spritznieten als neue Organoblech-Metall-Hybridfügetechnik
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neue Organoblech-Metall-Hybridfügetechnik, 2020.
LibreCat
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Spritznieten Als Neue Organoblech-Metall-Hybridfügetechnik, 2020.
2020 | Dissertation | LibreCat-ID: 27642
Einfluss umgebungsbedingter Alterung auf das Werkstoffverhalten unverstärkter, kurzfaserverstärkter und gewebeverstärkter Thermoplaste
M. Hüttner , Einfluss Umgebungsbedingter Alterung Auf Das Werkstoffverhalten Unverstärkter, Kurzfaserverstärkter Und Gewebeverstärkter Thermoplaste , 2020.
LibreCat
M. Hüttner , Einfluss Umgebungsbedingter Alterung Auf Das Werkstoffverhalten Unverstärkter, Kurzfaserverstärkter Und Gewebeverstärkter Thermoplaste , 2020.
2020 | Dissertation | LibreCat-ID: 27643
Modellbasierte Beschreibung und Validierung der Glasfaserverkürzung im Spritzgießplastifizieraggregat mittels analytischer und und diskreter Ansätze
G. Heiderich, Modellbasierte Beschreibung Und Validierung Der Glasfaserverkürzung Im Spritzgießplastifizieraggregat Mittels Analytischer Und Und Diskreter Ansätze , 2020.
LibreCat
G. Heiderich, Modellbasierte Beschreibung Und Validierung Der Glasfaserverkürzung Im Spritzgießplastifizieraggregat Mittels Analytischer Und Und Diskreter Ansätze , 2020.
2020 | Dissertation | LibreCat-ID: 27644
Evaluation of LLDPE and PLA Films Manufactured with High Speed
H. Bayazian, Evaluation of LLDPE and PLA Films Manufactured with High Speed, 2020.
LibreCat
H. Bayazian, Evaluation of LLDPE and PLA Films Manufactured with High Speed, 2020.
2020 | Dissertation | LibreCat-ID: 27645
Modellierung der Materialströmung auf gleichläufigen Doppelschneckenextrudern mit Hilfe der Performance Mapping Methode
F. Sporkmann, Modellierung Der Materialströmung Auf Gleichläufigen Doppelschneckenextrudern Mit Hilfe Der Performance Mapping Methode, 2020.
LibreCat
F. Sporkmann, Modellierung Der Materialströmung Auf Gleichläufigen Doppelschneckenextrudern Mit Hilfe Der Performance Mapping Methode, 2020.
2020 | Dissertation | LibreCat-ID: 27646
Entwicklung einer Zylindertemperatureinstellungsregelung auf Basis von Fuzzy-Logik
V. Resonnek, Entwicklung Einer Zylindertemperatureinstellungsregelung Auf Basis von Fuzzy-Logik , 2020.
LibreCat
V. Resonnek, Entwicklung Einer Zylindertemperatureinstellungsregelung Auf Basis von Fuzzy-Logik , 2020.
2020 | Journal Article | LibreCat-ID: 23861
Materialabbau im Doppelschneckenextruder
M. Altepeter, V. Schöppner, Kunststoffe (2020).
LibreCat
M. Altepeter, V. Schöppner, Kunststoffe (2020).
2020 | Conference Paper | LibreCat-ID: 23865
Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations
V. Schöppner, F. Brüning, in: C. Hopmann, R. Dahlmann (Eds.), Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, Springer, 2020.
LibreCat
V. Schöppner, F. Brüning, in: C. Hopmann, R. Dahlmann (Eds.), Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, Springer, 2020.
2020 | Journal Article | LibreCat-ID: 23868
Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden
M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365 (2020).
LibreCat
M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365 (2020).
2020 | Conference Paper | LibreCat-ID: 23873
Hot gas welding – Influences of the tool design
M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, in: 2020.
LibreCat
| DOI
M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, in: 2020.
2020 | Book Chapter | LibreCat-ID: 24479
The Influence of Hydrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics and its Non-Destructive Characterization
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Advances in Polymer Processing 2020, Berlin, Heidelberg, 2020.
LibreCat
| DOI
E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Advances in Polymer Processing 2020, Berlin, Heidelberg, 2020.
2020 | Conference Paper | LibreCat-ID: 42892
Long- and Short-Term Tensile Strength and Morphology of Joined Beta-Nucleated Polypropylene Parts
A. Wübbeke, V. Schöppner, A. Paul, M. Tiemann, L. Austermeier, M. Fitze, M. Chen, F. Jakob, H.-P. Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: SPE ANTEC 2020: The Virtual Edition 5 , 2020.
LibreCat
A. Wübbeke, V. Schöppner, A. Paul, M. Tiemann, L. Austermeier, M. Fitze, M. Chen, F. Jakob, H.-P. Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: SPE ANTEC 2020: The Virtual Edition 5 , 2020.
2020 | Conference Paper | LibreCat-ID: 24245
Investigation of residual stresses of hot plate welding
V. Schöppner, A. Wübbeke, B. Geißler, M. Schmidt, A. Maginer, T. Wu, T. Niendorf, F. Jakob, H. Heim, in: 73rd Annual Assembly of the International Institute of Welding (IIW), Springer-Verlag, Marina Bay (Singapore), 2020.
LibreCat
V. Schöppner, A. Wübbeke, B. Geißler, M. Schmidt, A. Maginer, T. Wu, T. Niendorf, F. Jakob, H. Heim, in: 73rd Annual Assembly of the International Institute of Welding (IIW), Springer-Verlag, Marina Bay (Singapore), 2020.
2020 | Journal Article | LibreCat-ID: 24236
Selected Aspects for the Assessment of Laser Transmission Welding
V. Schöppner, A. Wübbeke, F. Schriegel, A. Paul, M. Tiemann, B. Geißler, M. Schmidt, A. Magnier, T. Niendorf, Joining Plastics (2020) 30–35.
LibreCat
V. Schöppner, A. Wübbeke, F. Schriegel, A. Paul, M. Tiemann, B. Geißler, M. Schmidt, A. Magnier, T. Niendorf, Joining Plastics (2020) 30–35.
2020 | Conference Paper | LibreCat-ID: 24472
LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS
V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, L. Austermeier, M. Fitze, M. Chen, F. Jakob, H.-P.- Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: ANTEC20, 2020.
LibreCat
V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, L. Austermeier, M. Fitze, M. Chen, F. Jakob, H.-P.- Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: ANTEC20, 2020.
2020 | Conference Paper | LibreCat-ID: 24247
Material Specific Predicting of the Optimal Joining Parameters for the Screw Blind Rivet Joining Process
E. Moritzer, J. Hillemeyer, in: 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference, 2020.
LibreCat
E. Moritzer, J. Hillemeyer, in: 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference, 2020.
2019 | Conference Paper | LibreCat-ID: 25517
Einfluss unterschiedlicher Temperatureinstellungen und Schneckengeometrien auf die thermische Homogenität und das Prozessverhalten von schnelllaufenden Kautschukextrudern
D. Stüker, V. Schöppner, in: 2019.
LibreCat
D. Stüker, V. Schöppner, in: 2019.
2019 | Conference (Editor) | LibreCat-ID: 25580
Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Nieten Im Spritzgießprozess Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen, 2019.
LibreCat
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, eds., Nieten Im Spritzgießprozess Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen, 2019.
2019 | Conference Paper | LibreCat-ID: 25582
Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, D. Krassmann, in: 2019.
LibreCat
E. Moritzer, D. Krassmann, in: 2019.
2019 | Conference (Editor) | LibreCat-ID: 25583
Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, D. Krassmann, eds., Nieten Ohne Fügeelement Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen, 2019.
LibreCat
E. Moritzer, D. Krassmann, eds., Nieten Ohne Fügeelement Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen, 2019.
2019 | Journal Article | LibreCat-ID: 25608
New Polymers for Needleless Electrospinning from Low-Toxic Solvents
E. Moritzer, M. Wortmann, N. Frese, L. Sabantina, R. Petkau, F. Kinzel, A. Golzhauser, B. Husgen, A. Ehrmann, NANOMATERIALS (2019).
LibreCat
E. Moritzer, M. Wortmann, N. Frese, L. Sabantina, R. Petkau, F. Kinzel, A. Golzhauser, B. Husgen, A. Ehrmann, NANOMATERIALS (2019).
2019 | Journal Article | LibreCat-ID: 25610
Advanced output of silicone molds in vacuum casting processes by polyamide 12 powder supplementation
E. Moritzer, M. Wortmann, A. Hoffmann, N. Frese, A. Heide, J. Brikmann, N. Brandt, M. Menzel, A. Gölzhäuser, B. Häsgen, POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019) 1937–1943.
LibreCat
E. Moritzer, M. Wortmann, A. Hoffmann, N. Frese, A. Heide, J. Brikmann, N. Brandt, M. Menzel, A. Gölzhäuser, B. Häsgen, POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019) 1937–1943.
2019 | Conference Paper | LibreCat-ID: 25611
Akustische Charakterisierung der mechanischen Eigenschaften künstlich gealterter Polymere
E. Moritzer, M. Hüttner, M. Henning, M. Webesen, F. Woitschek, in: 45. Deutsche Jahrestagung Für Akustik - DAGA, Rostock (Deutschland), 2019, pp. 505–508.
LibreCat
E. Moritzer, M. Hüttner, M. Henning, M. Webesen, F. Woitschek, in: 45. Deutsche Jahrestagung Für Akustik - DAGA, Rostock (Deutschland), 2019, pp. 505–508.
2019 | Conference Paper | LibreCat-ID: 25613
Analyse von Wirrmattenstrukturen hinsichtlich der Substitutionsfähigkeit von Schaumstoffen in Polstern und Matratzen
E. Moritzer, T. Westhues, in: 26. Fachtagung Über Die Verarbeitung Und Anwendung von Polymere, Chemnitz (Deutschland), 2019, p. S. 74.
LibreCat
E. Moritzer, T. Westhues, in: 26. Fachtagung Über Die Verarbeitung Und Anwendung von Polymere, Chemnitz (Deutschland), 2019, p. S. 74.
2019 | Conference Paper | LibreCat-ID: 25617
Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation
V. Schöppner, F. Sporkmann, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
V. Schöppner, F. Sporkmann, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
2019 | Conference Paper | LibreCat-ID: 25621
Charakterisierung des Arburg Kunststoff Freiformens
E. Moritzer, A. Hirsch, in: ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design Und Fertigung, Lennestadt (Deutschland), 2019.
LibreCat
E. Moritzer, A. Hirsch, in: ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design Und Fertigung, Lennestadt (Deutschland), 2019.
2019 | Conference Paper | LibreCat-ID: 25622
COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS
V. Schöppner, M. Dörner, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
V. Schöppner, M. Dörner, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
2019 | Conference Paper | LibreCat-ID: 25623
DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC
V. Schöppner, V. Resonnek, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
V. Schöppner, V. Resonnek, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
2019 | Conference Paper | LibreCat-ID: 25624
Determining the degree of agglomeration of solid additives while using inline injection molding compounding (IIMC)
E. Moritzer, J. Jilg, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
E. Moritzer, J. Jilg, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
2019 | Conference Paper | LibreCat-ID: 25626
Direktverschraubung additiv gefertigter Kunststoffbauteile
E. Moritzer, J. Hillemeyer, in: 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
E. Moritzer, J. Hillemeyer, in: 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
2019 | Book | LibreCat-ID: 25627
Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern
V. Schöppner, K. Westhues, Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern, Chemnitz (Deutschland), 2019.
LibreCat
V. Schöppner, K. Westhues, Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern, Chemnitz (Deutschland), 2019.
2019 | Journal Article | LibreCat-ID: 25628
Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 1
V. Schöppner, J. Walter, GAK-Gummi Fasern Kunststoffe (2019) S. 152-159.
LibreCat
V. Schöppner, J. Walter, GAK-Gummi Fasern Kunststoffe (2019) S. 152-159.
2019 | Journal Article | LibreCat-ID: 25629
Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 2
V. Schöppner, J. Walter, GAK Gummi Faser Kunststoffe (2019) 206–213.
LibreCat
V. Schöppner, J. Walter, GAK Gummi Faser Kunststoffe (2019) 206–213.
2019 | Conference Paper | LibreCat-ID: 25630
Experimental Determination of Reduction Factors for Dimensioning the Shear Tensil Strength of the Screw Blind Riveting
E. Moritzer, J. Hillemeyer, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
E. Moritzer, J. Hillemeyer, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
2019 | Journal Article | LibreCat-ID: 25631
Experimental Investigations Into the Dimensioning of the Static Pull-Out Strength of the Screw Blind Rivet
E. Moritzer, J. Hillemeyer, Joining Plastics (2019) 40–46.
LibreCat
E. Moritzer, J. Hillemeyer, Joining Plastics (2019) 40–46.
2019 | Journal Article | LibreCat-ID: 25633
Extruder optimier dich!
V. Schöppner, V. Resonnek, Kunstsstoffe (2019) 56–61.
LibreCat
V. Schöppner, V. Resonnek, Kunstsstoffe (2019) 56–61.
2019 | Conference Paper | LibreCat-ID: 25634
Grundlagen der Haftung in der Grenzfläche beim Kunststoffschweißprozess
V. Schöppner, in: VDI Wissensforum - Schweißen von Kunststoffen, Paderborn (Deutschland), 2019.
LibreCat
V. Schöppner, in: VDI Wissensforum - Schweißen von Kunststoffen, Paderborn (Deutschland), 2019.
2019 | Journal Article | LibreCat-ID: 25635
Improved abrasion resistance of textile fabrics due to polymer coatings
E. Moritzer, M. Wortmann, N. Frese, L. Hes, A. Golzhauser, A. Ehrmann, JOURNAL OF INDUSTRIAL TEXTILES (2019) 572–583.
LibreCat
E. Moritzer, M. Wortmann, N. Frese, L. Hes, A. Golzhauser, A. Ehrmann, JOURNAL OF INDUSTRIAL TEXTILES (2019) 572–583.
2019 | Conference Paper | LibreCat-ID: 25636
Influences on structural intensity for injection mouldet thermoplastic parts
E. Moritzer, D. Netzband, A. Ujma, in: 23rd International Congress on Acoustics, Aachen (Deutschland), 2019.
LibreCat
E. Moritzer, D. Netzband, A. Ujma, in: 23rd International Congress on Acoustics, Aachen (Deutschland), 2019.
2019 | Journal Article | LibreCat-ID: 25637
Inline-Oberflächenaktivierung mittels Plasma für das 2K-Spritzgießen
E. Moritzer, F.M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, S. Asad, Wissenschaftlicher Arbeitskreis Der Universitäts-Professoren Der Kunststofftechnik (2019) 54–59.
LibreCat
E. Moritzer, F.M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, S. Asad, Wissenschaftlicher Arbeitskreis Der Universitäts-Professoren Der Kunststofftechnik (2019) 54–59.
2019 | Conference Paper | LibreCat-ID: 24319
Untersuchung des Dosierverhaltens von Carbonfaserrezyklaten für den Einsatz im gleichläufigen Doppel-schneckenextruder
H. Malatyali, V. Schöppner, in: 27. Fachtagung Technomer, Chemnitz, 2019.
LibreCat
H. Malatyali, V. Schöppner, in: 27. Fachtagung Technomer, Chemnitz, 2019.
2019 | Conference Paper | LibreCat-ID: 24326
Vibration welding of components with angled areas in the direction of vibration
S. Vogtschmidt, V. Schöppner, in: Bratislava, 2019.
LibreCat
S. Vogtschmidt, V. Schöppner, in: Bratislava, 2019.
2019 | Conference Paper | LibreCat-ID: 25638
InMould-Plasma
E. Moritzer, F.M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, S. Asad, in: Eröffnung Plasma-Campus Bei Plasmatreat GmbH, Steinhagen (Deutschland), 2019.
LibreCat
E. Moritzer, F.M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, S. Asad, in: Eröffnung Plasma-Campus Bei Plasmatreat GmbH, Steinhagen (Deutschland), 2019.
2019 | Journal Article | LibreCat-ID: 25639
Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU)
E. Moritzer, J. Jilg, N. Sibbe, PU MAGAZIN - International (2019) 320–324.
LibreCat
E. Moritzer, J. Jilg, N. Sibbe, PU MAGAZIN - International (2019) 320–324.
2019 | Journal Article | LibreCat-ID: 25640
Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU)
E. Moritzer, J. Jilg, N. Sibbe, TPE Magazine International (2019) 230–234.
LibreCat
E. Moritzer, J. Jilg, N. Sibbe, TPE Magazine International (2019) 230–234.
2019 | Conference Paper | LibreCat-ID: 25689
Lebensdauer von Composites und Composite-Metall-Hybridverbindungen
E. Moritzer, M. Hüttner, D. Krassmann, M. Wittke, in: Werkstoffwoche, Dresden (Deutschland), 2019.
LibreCat
E. Moritzer, M. Hüttner, D. Krassmann, M. Wittke, in: Werkstoffwoche, Dresden (Deutschland), 2019.
2019 | Conference Paper | LibreCat-ID: 25736
Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters
V. Schöppner, H. Bayazian, A. Yadegari, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
V. Schöppner, H. Bayazian, A. Yadegari, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
2019 | Conference Paper | LibreCat-ID: 25737
New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method
V. Schöppner, F. Sporkmann, A. Heide, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
V. Schöppner, F. Sporkmann, A. Heide, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
2019 | Conference Paper | LibreCat-ID: 25738
Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 9. Fügetechnisches Gemeinschaftskolloquium, 2019.
LibreCat
E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 9. Fügetechnisches Gemeinschaftskolloquium, 2019.
2019 | Conference Paper | LibreCat-ID: 25745
Oberflächennachbearbeitung und Kleben von FDM-Bauteilen
E. Moritzer, A. Hirsch, in: DGM-Seminar Für Fortgeschrittene, Paderborn (Deutschland), 2019.
LibreCat
E. Moritzer, A. Hirsch, in: DGM-Seminar Für Fortgeschrittene, Paderborn (Deutschland), 2019.
2019 | Conference Paper | LibreCat-ID: 25746
Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters
V. Schöppner, H. Bayazian, A. Yadegari, H. Haddad, in: 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
V. Schöppner, H. Bayazian, A. Yadegari, H. Haddad, in: 35th PPS, Cesme-Izmir (Türkei), 2019.
2019 | Conference Paper | LibreCat-ID: 25747
Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer
E. Moritzer, T. Westhues, in: 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
E. Moritzer, T. Westhues, in: 35th PPS, Cesme-Izmir (Türkei), 2019.
2019 | Journal Article | LibreCat-ID: 25748
Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites
E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, W. Truemper, Welding in the World (2019) 867–873.
LibreCat
E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, W. Truemper, Welding in the World (2019) 867–873.
2019 | Conference Paper | LibreCat-ID: 25750
Scale up von Doppelschneckenmaschinen
V. Schöppner, F. Sporkmann, in: VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
V. Schöppner, F. Sporkmann, in: VDI Wissensforum, Stuttgart (Deutschland), 2019.
2019 | Book | LibreCat-ID: 25751
Schmelzefilter
V. Schöppner, P. Meilwes, K. Westhues, Schmelzefilter, Chemnitz (Deutschland), 2019.
LibreCat
V. Schöppner, P. Meilwes, K. Westhues, Schmelzefilter, Chemnitz (Deutschland), 2019.
2019 | Journal Article | LibreCat-ID: 25753
Simulation aids compounding success
V. Schöppner, F. Sporkmann, Compounding World (2019) 47–56.
LibreCat
V. Schöppner, F. Sporkmann, Compounding World (2019) 47–56.