Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
599 Publications
2021 | Conference Paper | LibreCat-ID: 24096 | 
Moritzer, E., Hecker, F., & Hirsch, A. (2021). Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming. In D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021) (pp. 1268–1275). https://doi.org/10.26153/tsw/17643
LibreCat
| DOI
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24771
Knoop, F. (2020). Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren (Vol. 18). Shaker Verlag.
LibreCat
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24773
Fischer, M. (2020). Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte (Vol. 17). Shaker Verlag.
LibreCat
| Download (ext.)
2020 | Newspaper Article | LibreCat-ID: 24133
Schöppner, V., Austermeier, L., & Dietl, K. (2020). Der richtige Dreh für Simulationen. Blasformen & Extrusionswerkzeuge.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24134
Schöppner, V., Austermeier, L., & Dietl, K. (2020). SKZ simuliert Doppelschnecke. K Zeitung.
LibreCat
2020 | Journal Article | LibreCat-ID: 24183
Moritzer, E., Wortmann, M., Sabantina, L., Klocker, M., & Mirasol, J. (2020). Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent. JOURNAL OF INDUSTRIAL TEXTILES, 50, 224–239.
LibreCat
2020 | Journal Article | LibreCat-ID: 24184
Moritzer, E., Mühlhoff, F. M., Krampe, E., & Lochbaum, E. (2020). 2K-Haftverbunde aus originär inkompatiblen Kunststoffen. Plastverarbeiter, 07/20, 20–23.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24201
Moritzer, E., Kartelmeyer, S., & Hüttemann, V. (2020). Additive Manufactured Heat Pipe Injection Mould Element. Direct Digital Manufacturing Conference 2020. Direct Digital Manufacturing Conference 2020, Berlin.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24203
Moritzer, E., & Hillemeyer, J. (2020). Additiveteile Direktverschrauben. 6. Fachkonferenz 3D-Druck in Der Automobielindustrie. 6. Fachkonferenz 3D-Druck in der Automobielindustrie, Hamburg.
LibreCat
2020 | Misc | LibreCat-ID: 24204
Schöppner, V., Dörner, M., & Marschik, C. (2020). ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24206
Moritzer, E., & Hillemeyer, J. (2020). Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben. 10. Gemeinschaftskolloquium. 10. Gemeinschaftskolloquium, WebKolloquium (Deutschland).
LibreCat
2020 | Journal Article | LibreCat-ID: 24207
Schöppner, V., Dörner, M., Marschik, C., Roland, W., Schaufler, S., & Steinbichler, G. (2020). Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion). Polymers, 12(9), 1900.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24213
Moritzer, E., & Wittke, M. (2020). CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS. Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020. Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, Digital.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24228
Moritzer, E., & Krassmann, D. (2020). Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics. 73rd Annual Assembly of the International Institute of Welding (IIW). 73rd Annual Assembly of the International Institute of Welding (IIW), Online.
LibreCat
2020 | Journal Article | LibreCat-ID: 24231
Schöppner, V., Dörner, M., Marschik, C., & Steinbichler, G. (2020). Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws. Polymers, 946.
LibreCat
2020 | Journal Article | LibreCat-ID: 24232
Moritzer, E., Jilg, J., Schilp, C., Krempl, N., & Friesenbichler, W. (2020). Die Kunst der Entformung. Kunststoffe, 60–63.
LibreCat
2020 | Journal Article | LibreCat-ID: 24233
Moritzer, E., Hopp, M., & Wittke, M. (2020). EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG. WAK Jahreszeitschrift, 2–5.
LibreCat
2020 | Journal Article | LibreCat-ID: 24234
Moritzer, E., & Krassmann, D. (2020). Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen. Joining Plastics, 96–103.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24235
Moritzer, E., Krassmann, D., & Brikmann, J. (2020). Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen. 10. Fügetechnisches Gemeinschaftskolloquium. 10. Fügetechnisches Gemeinschaftskolloquium.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24237
Moritzer, E., Kartelmeyer, S., Hüttemann, M., & Jaroschek, C. (2020). INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT. 78th Annual Technical Conference for Plastics Professionals (ANTEC). 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA).
LibreCat
2020 | Conference Paper | LibreCat-ID: 24238
Moritzer, E., & Mühlhoff, F. M. (2020). Inline Surface Activation in the multi Injection Molding Process. Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020. Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, Digital.
LibreCat
2020 | Journal Article | LibreCat-ID: 24239
Moritzer, E., Mühlhoff, F. M., Lochbaum, E., & Krampe, E. (2020). InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen. KGK - Rubberpoint, 22–26.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24242
Moritzer, E., Hirsch, A., & Dalmer, C. (2020). Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Additive Manufacturing in Products and Applications (AMPA), 112–129.
LibreCat
2020 | Journal Article | LibreCat-ID: 24246
Moritzer, E., Mühlhoff, F. M., & Krampe, E. (2020). Kostensenkung beim Mehrkomponenten-Spritzgießen. Kunststoff + Verarbeitung, 5, 92–93.
LibreCat
2020 | Journal Article | LibreCat-ID: 24248
Moritzer, E., Mühlhoff, F. M., Krampe, E., & Böhnke, B. (2020). Mehr Materialkombinationen, weniger Kosten. Kunststoffe, 39–42.
LibreCat
2020 | Journal Article | LibreCat-ID: 24249
Moritzer, E., & Wittke, M. (2020). Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite. MNWP Magazin, 26–27.
LibreCat
2020 | Journal Article | LibreCat-ID: 24250
Moritzer, E., Mühlhoff, F. M., Krampe, E., & Böhnke, B. (2020). More Material Combinations, Lower Costs. Kunststoffe International, 22–25.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24251
Moritzer, E., & Krassmann, D. (2020). Neuartige Fügetechnik für Organoblech-Hybridverbindungen. DVS Congress 2020. DVS Congress 2020, Online.
LibreCat
2020 | Journal Article | LibreCat-ID: 24252
Moritzer, E., & Wittke, M. (2020). Neue Maßstäbe in puncto Festigkeit und Faserlänge. Plastverarbeiter, 18–21.
LibreCat
2020 | Journal Article | LibreCat-ID: 24253
Moritzer, E., Mühlhoff, F. M., Krampe, E., & Böhnke, B. (2020). Plasma technology rationalizes 2-component processes. Adhesion ADHESIVES + SEALANTS.
LibreCat
2020 | Journal Article | LibreCat-ID: 24256
Moritzer, E., Mühlhoff, F. M., Krampe, E., & Böhnke, B. (2020). Plasma-Technologie zur Rationalisierung von 2K-Prozessen. Adhäsion KLEBEN & DICHTEN, 10, 16–19.
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 24259
Moritzer, E., Budde, C., Hüttner, M., & Krassmann, D. (Eds.). (2020). Spritznieten als neue Organoblech-Metall-Hybridfügetechnik.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24260
Moritzer, E., & Schumacher, C. (2020). Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting. 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM). 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien).
LibreCat
2020 | Journal Article | LibreCat-ID: 24312
Vogtschmidt, S., Fiebig, I., & Schöppner, V. (2020). Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien. Joining Plastics, 3–4.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24317
Malatyali, H., Schöppner, V., Behrendt, A., Hoemann, T., Sporkmann, F., & Hanselle, F. (2020). Differences between the recycled carbon fibers especially regarding the product quality, . SPE ANTEC.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24318
Vogtschmidt, S., & Schöppner, V. (2020). Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien. DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 365.
LibreCat
2020 | Journal Article | LibreCat-ID: 24321
Vogtschmidt, S., & Schöppner, V. (2020). Vibration welding of components with angled areas in the direction of vibration. Welding in the World, 64, 1843–1853.
LibreCat
2020 | Journal Article | LibreCat-ID: 24324
Vogtschmidt, S., & Schöppner, V. (2020). Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Joining Plastics, 3–4.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24385
Arndt, T., & Schöppner, V. (2020). Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen von Thermoplasten. Joining Plastics.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24386
Arndt, T., & Schöppner, V. (2020). Wenn Regeln Potenziale freisetzen. K-Zeitung.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24387
Arndt, T., & Schöppner, V. (2020). Quasi-Simultaneous Laser Transmission Welding. PhotonicsViews.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24471
Schöppner, V., & Bialaschik, M. (2020). Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides. 73th Annual Assembly of the International Institute of Welding (IIW). 73th Annual Assembly of the International Institute of Welding (IIW).
LibreCat
2020 | Conference Abstract | LibreCat-ID: 24478
Moritzer, E., & Wächter, J. (2020). From filament production to material qualification for the FDM process. Seminar(Thermofisher): Polymer Compounds for 3D filaments – production, quality control and application, Karlsruhe.
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 25768
Moritzer, E., & Krassmann, D. (Eds.). (2020). Neuartige Fügetechnik für Organoblech-Hybridverbindungen.
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 25779
Moritzer, E., Budde, C., Hüttner, M., & Krassmann, D. (Eds.). (2020). Spritznieten als neue Organoblech-Metall-Hybridfügetechnik.
LibreCat
2020 | Dissertation | LibreCat-ID: 27642
Hüttner , M. (2020). Einfluss umgebungsbedingter Alterung auf das Werkstoffverhalten unverstärkter, kurzfaserverstärkter und gewebeverstärkter Thermoplaste .
LibreCat
2020 | Dissertation | LibreCat-ID: 27643
Heiderich, G. (2020). Modellbasierte Beschreibung und Validierung der Glasfaserverkürzung im Spritzgießplastifizieraggregat mittels analytischer und und diskreter Ansätze .
LibreCat
2020 | Dissertation | LibreCat-ID: 27644
Bayazian, H. (2020). Evaluation of LLDPE and PLA Films Manufactured with High Speed.
LibreCat
2020 | Dissertation | LibreCat-ID: 27645
Sporkmann, F. (2020). Modellierung der Materialströmung auf gleichläufigen Doppelschneckenextrudern mit Hilfe der Performance Mapping Methode.
LibreCat
2020 | Dissertation | LibreCat-ID: 27646
Resonnek, V. (2020). Entwicklung einer Zylindertemperatureinstellungsregelung auf Basis von Fuzzy-Logik .
LibreCat
2020 | Journal Article | LibreCat-ID: 23861
Altepeter, M., & Schöppner, V. (2020). Materialabbau im Doppelschneckenextruder. Kunststoffe.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23865
Schöppner, V., & Brüning, F. (2020). Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations. In C. Hopmann & R. Dahlmann (Eds.), Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology. Springer.
LibreCat
2020 | Journal Article | LibreCat-ID: 23868
Albrecht, M., Bialaschik, M., Gehde, M., & Schöppner, V. (2020). Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden. DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 365.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23873
Albrecht, M., Bialaschik, M., Gehde, M., & Schöppner, V. (2020). Hot gas welding – Influences of the tool design. PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, Pretoria. https://doi.org/10.1063/5.0029478
LibreCat
| DOI
2020 | Book Chapter | LibreCat-ID: 24479
Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2020). The Influence of Hydrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics and its Non-Destructive Characterization. In Advances in Polymer Processing 2020. https://doi.org/10.1007/978-3-662-60809-8_16
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 42892
Wübbeke, A., Schöppner, V., Paul, A., Tiemann, M., Austermeier, L., Fitze, M., Chen, M., Jakob, F., Heim, H.-P., Wu, T., Niendorf, T., Röhricht, M.-L., & Schmidt, M. (2020). Long- and Short-Term Tensile Strength and Morphology of Joined Beta-Nucleated Polypropylene Parts. SPE ANTEC 2020: The Virtual Edition 5 .
LibreCat
2020 | Conference Paper | LibreCat-ID: 24245
Schöppner, V., Wübbeke, A., Geißler, B., Schmidt, M., Maginer, A., Wu, T., Niendorf, T., Jakob, F., & Heim, H. (2020). Investigation of residual stresses of hot plate welding. 73rd Annual Assembly of the International Institute of Welding (IIW). 73rd Annual Assembly of the International Institute of Welding (IIW), Marina Bay (Singapore).
LibreCat
2020 | Journal Article | LibreCat-ID: 24236
Schöppner, V., Wübbeke, A., Schriegel, F., Paul, A., Tiemann, M., Geißler, B., Schmidt, M., Magnier, A., & Niendorf, T. (2020). Selected Aspects for the Assessment of Laser Transmission Welding. Joining Plastics, 30–35.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24472
Schöppner, V., Wübbeke, A., Paul, A., Tiemann, M., Austermeier, L., Fitze, M., Chen, M., Jakob, F., Heim, H.-P.-, Wu, T., Niendorf, T., Röhricht, M.-L., & Schmidt, M. (2020). LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS. ANTEC20. ANTEC20, Texas (USA).
LibreCat
2020 | Conference Paper | LibreCat-ID: 24247
Moritzer, E., & Hillemeyer, J. (2020). Material Specific Predicting of the Optimal Joining Parameters for the Screw Blind Rivet Joining Process. 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference. 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25517
Stüker, D., & Schöppner, V. (2019). Einfluss unterschiedlicher Temperatureinstellungen und Schneckengeometrien auf die thermische Homogenität und das Prozessverhalten von schnelllaufenden Kautschukextrudern. 26. Fachtagungüber Verarbeitung und Anwendung von Polymeren (Technomer), Chemnitz.
LibreCat
2019 | Conference (Editor) | LibreCat-ID: 25580
Moritzer, E., Budde, C., Hüttner, M., & Krassmann, D. (Eds.). (2019). Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25582
Moritzer, E., & Krassmann, D. (2019). Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. 9. Fügetechnisches Gemeinschaftskolloquium.
LibreCat
2019 | Conference (Editor) | LibreCat-ID: 25583
Moritzer, E., & Krassmann, D. (Eds.). (2019). Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen.
LibreCat
2019 | Journal Article | LibreCat-ID: 25608
Moritzer, E., Wortmann, M., Frese, N., Sabantina, L., Petkau, R., Kinzel, F., Golzhauser, A., Husgen, B., & Ehrmann, A. (2019). New Polymers for Needleless Electrospinning from Low-Toxic Solvents. NANOMATERIALS, 9, Article 52.
LibreCat
2019 | Journal Article | LibreCat-ID: 25610
Moritzer, E., Wortmann, M., Hoffmann, A., Frese, N., Heide, A., Brikmann, J., Brandt, N., Menzel, M., Gölzhäuser, A., & Häsgen, B. (2019). Advanced output of silicone molds in vacuum casting processes by polyamide 12 powder supplementation. POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, 58, 1937–1943.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25611
Moritzer, E., Hüttner, M., Henning, M., Webesen, M., & Woitschek, F. (2019). Akustische Charakterisierung der mechanischen Eigenschaften künstlich gealterter Polymere. 45. Deutsche Jahrestagung Für Akustik - DAGA, 505–508.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25613
Moritzer, E., & Westhues, T. (2019). Analyse von Wirrmattenstrukturen hinsichtlich der Substitutionsfähigkeit von Schaumstoffen in Polstern und Matratzen. 26. Fachtagung Über Die Verarbeitung Und Anwendung von Polymere, S. 74.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25617
Schöppner, V., & Sporkmann, F. (2019). Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation. 35th International Conference of the Polymer Processing Society (PPS). 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25621
Moritzer, E., & Hirsch, A. (2019). Charakterisierung des Arburg Kunststoff Freiformens. ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design Und Fertigung. ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design und Fertigung, Lennestadt (Deutschland).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25622
Schöppner, V., & Dörner, M. (2019). COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS. 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25623
Schöppner, V., & Resonnek, V. (2019). DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC. 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25624
Moritzer, E., & Jilg, J. (2019). Determining the degree of agglomeration of solid additives while using inline injection molding compounding (IIMC). 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25626
Moritzer, E., & Hillemeyer, J. (2019). Direktverschraubung additiv gefertigter Kunststoffbauteile. 9. Fügetechnisches Gemeinschaftskolloquium. 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland).
LibreCat
2019 | Book | LibreCat-ID: 25627
Schöppner, V., & Westhues, K. (2019). Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern.
LibreCat
2019 | Journal Article | LibreCat-ID: 25628
Schöppner, V., & Walter, J. (2019). Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 1. GAK-Gummi Fasern Kunststoffe, S. 152-159.
LibreCat
2019 | Journal Article | LibreCat-ID: 25629
Schöppner, V., & Walter, J. (2019). Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 2. GAK Gummi Faser Kunststoffe, 206–213.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25630
Moritzer, E., & Hillemeyer, J. (2019). Experimental Determination of Reduction Factors for Dimensioning the Shear Tensil Strength of the Screw Blind Riveting. 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA).
LibreCat
2019 | Journal Article | LibreCat-ID: 25631
Moritzer, E., & Hillemeyer, J. (2019). Experimental Investigations Into the Dimensioning of the Static Pull-Out Strength of the Screw Blind Rivet. Joining Plastics, 40–46.
LibreCat
2019 | Journal Article | LibreCat-ID: 25633
Schöppner, V., & Resonnek, V. (2019). Extruder optimier dich! Kunstsstoffe, 56–61.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25634
Schöppner, V. (2019). Grundlagen der Haftung in der Grenzfläche beim Kunststoffschweißprozess. VDI Wissensforum - Schweißen von Kunststoffen. VDI Wissensforum - Schweißen von Kunststoffen, Paderborn (Deutschland).
LibreCat
2019 | Journal Article | LibreCat-ID: 25635
Moritzer, E., Wortmann, M., Frese, N., Hes, L., Golzhauser, A., & Ehrmann, A. (2019). Improved abrasion resistance of textile fabrics due to polymer coatings. JOURNAL OF INDUSTRIAL TEXTILES, 49, 572–583.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25636
Moritzer, E., Netzband, D., & Ujma, A. (2019). Influences on structural intensity for injection mouldet thermoplastic parts. 23rd International Congress on Acoustics. 23rd International Congress on Acoustics, Aachen (Deutschland).
LibreCat
2019 | Journal Article | LibreCat-ID: 25637
Moritzer, E., Mühlhoff, F. M., Nordmeyer, T., Böhnke, B., Krampe, E., & Asad, S. (2019). Inline-Oberflächenaktivierung mittels Plasma für das 2K-Spritzgießen. Wissenschaftlicher Arbeitskreis Der Universitäts-Professoren Der Kunststofftechnik, 54–59.
LibreCat
2019 | Conference Paper | LibreCat-ID: 24319
Malatyali, H., & Schöppner, V. (2019). Untersuchung des Dosierverhaltens von Carbonfaserrezyklaten für den Einsatz im gleichläufigen Doppel-schneckenextruder. 27. Fachtagung Technomer.
LibreCat
2019 | Conference Paper | LibreCat-ID: 24326
Vogtschmidt, S., & Schöppner, V. (2019). Vibration welding of components with angled areas in the direction of vibration. 72nd Assembly of the International Institute of Welding (IIW), Bratislava.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25638
Moritzer, E., Mühlhoff, F. M., Nordmeyer, T., Böhnke, B., Krampe, E., & Asad, S. (2019). InMould-Plasma. Eröffnung Plasma-Campus Bei Plasmatreat GmbH. Eröffnung Plasma-Campus bei Plasmatreat GmbH, Steinhagen (Deutschland).
LibreCat
2019 | Journal Article | LibreCat-ID: 25639
Moritzer, E., Jilg, J., & Sibbe, N. (2019). Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU). PU MAGAZIN - International, 320–324.
LibreCat
2019 | Journal Article | LibreCat-ID: 25640
Moritzer, E., Jilg, J., & Sibbe, N. (2019). Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU). TPE Magazine International, 4, 230–234.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25689
Moritzer, E., Hüttner, M., Krassmann, D., & Wittke, M. (2019). Lebensdauer von Composites und Composite-Metall-Hybridverbindungen. Werkstoffwoche. Werkstoffwoche, Dresden (Deutschland).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25736
Schöppner, V., Bayazian, H., & Yadegari, A. (2019). Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters. 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25737
Schöppner, V., Sporkmann, F., & Heide, A. (2019). New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method. 35th International Conference of the Polymer Processing Society (PPS). 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25738
Moritzer, E., Budde, C., Hüttner, M., & Krassmann, D. (2019). Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. 9. Fügetechnisches Gemeinschaftskolloquium. 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25745
Moritzer, E., & Hirsch, A. (2019). Oberflächennachbearbeitung und Kleben von FDM-Bauteilen. DGM-Seminar Für Fortgeschrittene. DGM-Seminar für Fortgeschrittene, Paderborn (Deutschland).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25746
Schöppner, V., Bayazian, H., Yadegari, A., & Haddad, H. (2019). Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters. 35th PPS. 35th PPS, Cesme-Izmir (Türkei).
LibreCat
2019 | Conference Paper | LibreCat-ID: 25747
Moritzer, E., & Westhues, T. (2019). Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer. 35th PPS. 35th PPS, Cesme-Izmir (Türkei).
LibreCat
2019 | Journal Article | LibreCat-ID: 25748
Moritzer, E., Hirsch, A., Heim, H.-P., Cherif, C., & Truemper, W. (2019). Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. Welding in the World, 867–873.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25750
Schöppner, V., & Sporkmann, F. (2019). Scale up von Doppelschneckenmaschinen. VDI Wissensforum. VDI Wissensforum, Stuttgart (Deutschland).
LibreCat
2019 | Book | LibreCat-ID: 25751
Schöppner, V., Meilwes, P., & Westhues, K. (2019). Schmelzefilter.
LibreCat
2019 | Journal Article | LibreCat-ID: 25753
Schöppner, V., & Sporkmann, F. (2019). Simulation aids compounding success. Compounding World, 47–56.
LibreCat