Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
599 Publications
2021 | Conference Paper | LibreCat-ID: 24096 | 
@inproceedings{Moritzer_Hecker_Hirsch_2021, title={Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming}, DOI={10.26153/tsw/17643}, booktitle={Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021)}, author={Moritzer, Elmar and Hecker, Felix and Hirsch, André}, editor={Bourell, David}, year={2021}, pages={1268–1275} }
LibreCat
| DOI
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24771
@book{Knoop_2020, place={Düren}, series={Forschungsberichte des Direct Manufacturing Research Centers}, title={Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren}, volume={18}, publisher={Shaker Verlag}, author={Knoop, Frederick}, year={2020}, collection={Forschungsberichte des Direct Manufacturing Research Centers} }
LibreCat
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24773
@book{Fischer_2020, place={Düren}, series={Forschungsberichte des Direct Manufacturing Research Centers}, title={Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte}, volume={17}, publisher={Shaker Verlag}, author={Fischer, Matthias}, year={2020}, collection={Forschungsberichte des Direct Manufacturing Research Centers} }
LibreCat
| Download (ext.)
2020 | Newspaper Article | LibreCat-ID: 24133
@article{Schöppner_Austermeier_Dietl_2020, title={Der richtige Dreh für Simulationen}, journal={Blasformen & Extrusionswerkzeuge}, author={Schöppner, Volker and Austermeier, Laura and Dietl, Kilian}, year={2020} }
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24134
@article{Schöppner_Austermeier_Dietl_2020, title={SKZ simuliert Doppelschnecke}, journal={K Zeitung}, author={Schöppner, Volker and Austermeier, Laura and Dietl, Kilian}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24183
@article{Moritzer_Wortmann_Sabantina_Klocker_Mirasol_2020, title={Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent}, number={50}, journal={JOURNAL OF INDUSTRIAL TEXTILES}, author={Moritzer, Elmar and Wortmann, M. and Sabantina, L. and Klocker, M. and Mirasol, JR}, year={2020}, pages={224–239} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24184
@article{Moritzer_Mühlhoff_Krampe_Lochbaum_2020, title={2K-Haftverbunde aus originär inkompatiblen Kunststoffen}, number={07/20}, journal={Plastverarbeiter}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Krampe, Erhard and Lochbaum, Ella}, year={2020}, pages={20–23} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24201
@inproceedings{Moritzer_Kartelmeyer_Hüttemann_2020, place={Berlin}, title={Additive Manufactured Heat Pipe Injection Mould Element}, booktitle={Direct Digital Manufacturing Conference 2020}, author={Moritzer, Elmar and Kartelmeyer, Stephan and Hüttemann, Vincent }, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24203
@inproceedings{Moritzer_Hillemeyer_2020, place={Hamburg}, title={Additiveteile Direktverschrauben}, booktitle={6. Fachkonferenz 3D-Druck in der Automobielindustrie}, author={Moritzer, Elmar and Hillemeyer, Johannes}, year={2020} }
LibreCat
2020 | Misc | LibreCat-ID: 24204
@book{Schöppner_Dörner_Marschik_2020, title={ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION}, author={Schöppner, Volker and Dörner, M. and Marschik, C.}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24206
@inproceedings{Moritzer_Hillemeyer_2020, title={Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben}, booktitle={10. Gemeinschaftskolloquium}, author={Moritzer, Elmar and Hillemeyer, Johannes}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24207
@article{Schöppner_Dörner_Marschik_Roland_Schaufler_Steinbichler_2020, title={Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion)}, number={12(9)}, journal={Polymers}, author={Schöppner, Volker and Dörner, M. and Marschik, C. and Roland, W. and Schaufler, S. and Steinbichler, G.}, year={2020}, pages={1900} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24213
@inproceedings{Moritzer_Wittke_2020, title={CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS}, booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020}, author={Moritzer, Elmar and Wittke, M.}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24228
@inproceedings{Moritzer_Krassmann_2020, place={Online}, title={Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics}, booktitle={73rd Annual Assembly of the International Institute of Welding (IIW)}, author={Moritzer, Elmar and Krassmann, Dimitri}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24231
@article{Schöppner_Dörner_Marschik_Steinbichler_2020, title={Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws}, journal={Polymers}, author={Schöppner, Volker and Dörner, M. and Marschik, C. and Steinbichler, G.}, year={2020}, pages={946} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24232
@article{Moritzer_Jilg_Schilp_Krempl_Friesenbichler_2020, title={Die Kunst der Entformung}, journal={Kunststoffe}, author={Moritzer, Elmar and Jilg, J. and Schilp, C. and Krempl, N. and Friesenbichler, W.}, year={2020}, pages={60–63} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24233
@article{Moritzer_Hopp_Wittke_2020, title={EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG}, journal={WAK Jahreszeitschrift}, author={Moritzer, Elmar and Hopp, Matthias and Wittke, Marius}, year={2020}, pages={2–5} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24234
@article{Moritzer_Krassmann_2020, title={Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen}, journal={Joining Plastics}, author={Moritzer, Elmar and Krassmann, Dimitri}, year={2020}, pages={96–103} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24235
@inproceedings{Moritzer_Krassmann_Brikmann_2020, title={Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen}, booktitle={10. Fügetechnisches Gemeinschaftskolloquium}, author={Moritzer, Elmar and Krassmann, Dimitri and Brikmann, Johannes}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24237
@inproceedings{Moritzer_Kartelmeyer_Hüttemann_Jaroschek_2020, place={San Antonio (USA)}, title={INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT}, booktitle={78th Annual Technical Conference for Plastics Professionals (ANTEC)}, author={Moritzer, Elmar and Kartelmeyer, S. and Hüttemann, M. and Jaroschek, C.}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24238
@inproceedings{Moritzer_Mühlhoff_2020, title={Inline Surface Activation in the multi Injection Molding Process}, booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24239
@article{Moritzer_Mühlhoff_Lochbaum_Krampe_2020, title={InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen}, journal={KGK - Rubberpoint}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Lochbaum, Ella and Krampe, Erhard}, year={2020}, pages={22–26} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24242
@inproceedings{Moritzer_Hirsch_Dalmer_2020, place={Zurich (Switzerland)}, title={Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability}, booktitle={Additive Manufacturing in Products and Applications (AMPA)}, author={Moritzer, Elmar and Hirsch, André and Dalmer, C.}, year={2020}, pages={112–129} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24246
@article{Moritzer_Mühlhoff_Krampe_2020, title={Kostensenkung beim Mehrkomponenten-Spritzgießen}, number={5}, journal={Kunststoff + Verarbeitung}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Krampe, Erhard}, year={2020}, pages={92–93} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24248
@article{Moritzer_Mühlhoff_Krampe_Böhnke_2020, title={Mehr Materialkombinationen, weniger Kosten}, journal={Kunststoffe}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Krampe, Erhard and Böhnke, Birte}, year={2020}, pages={39–42} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24249
@article{Moritzer_Wittke_2020, title={Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite}, journal={MNWP Magazin}, author={Moritzer, Elmar and Wittke, M.}, year={2020}, pages={26–27} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24250
@article{Moritzer_Mühlhoff_Krampe_Böhnke_2020, title={More Material Combinations, Lower Costs}, journal={Kunststoffe international}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Krampe, Erhard and Böhnke, Birte}, year={2020}, pages={22–25} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24251
@inproceedings{Moritzer_Krassmann_2020, title={Neuartige Fügetechnik für Organoblech-Hybridverbindungen}, booktitle={DVS Congress 2020}, author={Moritzer, Elmar and Krassmann, Dimitri}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24252
@article{Moritzer_Wittke_2020, title={Neue Maßstäbe in puncto Festigkeit und Faserlänge}, journal={Plastverarbeiter}, author={Moritzer, Elmar and Wittke, M.}, year={2020}, pages={18–21} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24253
@article{Moritzer_Mühlhoff_Krampe_Böhnke_2020, title={Plasma technology rationalizes 2-component processes}, journal={adhesion ADHESIVES + SEALANTS}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Krampe, Erhard and Böhnke, Birte}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24256
@article{Moritzer_Mühlhoff_Krampe_Böhnke_2020, title={Plasma-Technologie zur Rationalisierung von 2K-Prozessen}, number={10}, journal={adhäsion KLEBEN & DICHTEN}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Krampe, Erhard and Böhnke, Birte}, year={2020}, pages={16–19} }
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 24259
@book{Moritzer_Budde_Hüttner_Krassmann_2020, title={Spritznieten als neue Organoblech-Metall-Hybridfügetechnik}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24260
@inproceedings{Moritzer_Schumacher_2020, place={Bukarest (Rumänien)}, title={Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting}, booktitle={4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM)}, author={Moritzer, Elmar and Schumacher, C.}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24312
@article{Vogtschmidt_Fiebig_Schöppner_2020, title={Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien}, number={3–4}, journal={Joining Plastics}, author={Vogtschmidt, Sascha and Fiebig, Isabel and Schöppner, Volker}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24317
@inproceedings{Malatyali_Schöppner_Behrendt_Hoemann_Sporkmann_Hanselle_2020, title={Differences between the recycled carbon fibers especially regarding the product quality, }, booktitle={SPE ANTEC}, author={Malatyali, Hatice and Schöppner, Volker and Behrendt, Alexander and Hoemann, Theresa and Sporkmann, Frederick and Hanselle, Felix}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24318
@inproceedings{Vogtschmidt_Schöppner_2020, title={Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien}, volume={365}, booktitle={DVS CONGRESS 2020 - Große Schweißtechnische Tagung}, author={Vogtschmidt, Sascha and Schöppner, Volker}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24321
@article{Vogtschmidt_Schöppner_2020, title={Vibration welding of components with angled areas in the direction of vibration}, volume={64}, journal={Welding in the World}, author={Vogtschmidt, Sascha and Schöppner, Volker}, year={2020}, pages={1843–1853} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24324
@article{Vogtschmidt_Schöppner_2020, title={Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten}, number={3–4}, journal={Joining Plastics}, author={Vogtschmidt, Sascha and Schöppner, Volker}, year={2020} }
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24385
@article{Arndt_Schöppner_2020, title={Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen von Thermoplasten}, journal={Joining Plastics}, author={Arndt, Theresa and Schöppner, Volker}, year={2020} }
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24386
@article{Arndt_Schöppner_2020, title={Wenn Regeln Potenziale freisetzen}, journal={K-Zeitung}, author={Arndt, Theresa and Schöppner, Volker}, year={2020} }
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24387
@article{Arndt_Schöppner_2020, title={Quasi-Simultaneous Laser Transmission Welding}, journal={PhotonicsViews}, author={Arndt, Theresa and Schöppner, Volker}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24471
@inproceedings{Schöppner_Bialaschik_2020, title={Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides}, booktitle={73th Annual Assembly of the International Institute of Welding (IIW)}, author={Schöppner, Volker and Bialaschik, Max}, year={2020} }
LibreCat
2020 | Conference Abstract | LibreCat-ID: 24478
@inproceedings{Moritzer_Wächter_2020, title={From filament production to material qualification for the FDM process}, author={Moritzer, Elmar and Wächter, Julian}, year={2020} }
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 25768
@book{Moritzer_Krassmann_2020, title={Neuartige Fügetechnik für Organoblech-Hybridverbindungen}, year={2020} }
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 25779
@book{Moritzer_Budde_Hüttner_Krassmann_2020, title={Spritznieten als neue Organoblech-Metall-Hybridfügetechnik}, year={2020} }
LibreCat
2020 | Dissertation | LibreCat-ID: 27642
@book{Hüttner _2020, title={Einfluss umgebungsbedingter Alterung auf das Werkstoffverhalten unverstärkter, kurzfaserverstärkter und gewebeverstärkter Thermoplaste }, author={Hüttner , Matthias }, year={2020} }
LibreCat
2020 | Dissertation | LibreCat-ID: 27643
@book{Heiderich_2020, title={Modellbasierte Beschreibung und Validierung der Glasfaserverkürzung im Spritzgießplastifizieraggregat mittels analytischer und und diskreter Ansätze }, author={Heiderich, Gilmar}, year={2020} }
LibreCat
2020 | Dissertation | LibreCat-ID: 27644
@book{Bayazian_2020, title={Evaluation of LLDPE and PLA Films Manufactured with High Speed}, author={Bayazian, Hoda}, year={2020} }
LibreCat
2020 | Dissertation | LibreCat-ID: 27645
@book{Sporkmann_2020, title={Modellierung der Materialströmung auf gleichläufigen Doppelschneckenextrudern mit Hilfe der Performance Mapping Methode}, author={Sporkmann, Frederik }, year={2020} }
LibreCat
2020 | Dissertation | LibreCat-ID: 27646
@book{Resonnek_2020, title={Entwicklung einer Zylindertemperatureinstellungsregelung auf Basis von Fuzzy-Logik }, author={Resonnek, Verena}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 23861
@article{Altepeter_Schöppner_2020, title={Materialabbau im Doppelschneckenextruder}, journal={Kunststoffe}, publisher={Carl Hanser Verlag}, author={Altepeter, Matthias and Schöppner, Volker}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 23865
@inproceedings{Schöppner_Brüning_2020, title={Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations}, booktitle={Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology}, publisher={Springer}, author={Schöppner, Volker and Brüning, Florian}, editor={Hopmann, Christian and Dahlmann, Rainer}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 23868
@article{Albrecht_Bialaschik_Gehde_Schöppner_2020, title={Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden}, volume={365}, journal={DVS CONGRESS 2020 - Große Schweißtechnische Tagung}, publisher={DVS Media GmbH}, author={Albrecht, Mirko and Bialaschik, Max and Gehde, Michael and Schöppner, Volker}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 23873
@inproceedings{Albrecht_Bialaschik_Gehde_Schöppner_2020, title={Hot gas welding – Influences of the tool design}, DOI={10.1063/5.0029478}, author={Albrecht, Mirko and Bialaschik, Max and Gehde, Michael and Schöppner, Volker}, year={2020} }
LibreCat
| DOI
2020 | Book Chapter | LibreCat-ID: 24479
@inbook{Moritzer_Hüttner_Henning_Webersen_2020, place={Berlin, Heidelberg}, title={The Influence of Hydrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics and its Non-Destructive Characterization}, DOI={10.1007/978-3-662-60809-8_16}, booktitle={Advances in Polymer Processing 2020}, author={Moritzer, Elmar and Hüttner, M. and Henning, Bernd and Webersen, Manuel}, year={2020} }
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 42892
@inproceedings{Wübbeke_Schöppner_Paul_Tiemann_Austermeier_Fitze_Chen_Jakob_Heim_Wu_et al._2020, title={Long- and Short-Term Tensile Strength and Morphology of Joined Beta-Nucleated Polypropylene Parts}, booktitle={SPE ANTEC 2020: The Virtual Edition 5 }, author={Wübbeke, Andrea and Schöppner, Volker and Paul, André and Tiemann, Michael and Austermeier, Laura and Fitze, Marcus and Chen, Mingie and Jakob, Fabian and Heim, Hans-Peter and Wu, Tao and et al.}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24245
@inproceedings{Schöppner_Wübbeke_Geißler_Schmidt_Maginer_Wu_Niendorf_Jakob_Heim_2020, place={Marina Bay (Singapore)}, title={Investigation of residual stresses of hot plate welding}, booktitle={73rd Annual Assembly of the International Institute of Welding (IIW)}, publisher={Springer-Verlag}, author={Schöppner, Volker and Wübbeke, Andrea and Geißler, B. and Schmidt, M. and Maginer, A. and Wu, T. and Niendorf, T. and Jakob, F. and Heim, H.}, year={2020} }
LibreCat
2020 | Journal Article | LibreCat-ID: 24236
@article{Schöppner_Wübbeke_Schriegel_Paul_Tiemann_Geißler_Schmidt_Magnier_Niendorf_2020, title={Selected Aspects for the Assessment of Laser Transmission Welding}, journal={Joining Plastics}, author={Schöppner, Volker and Wübbeke, Andrea and Schriegel, Fabian and Paul, Andrej and Tiemann, Michael and Geißler, Bastian and Schmidt, Michael and Magnier, Arnaud and Niendorf, Thomas }, year={2020}, pages={30–35} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24472
@inproceedings{Schöppner_Wübbeke_Paul_Tiemann_Austermeier_Fitze_Chen_Jakob_Heim_Wu_et al._2020, title={LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS}, booktitle={ANTEC20}, author={Schöppner, Volker and Wübbeke, Andrea and Paul, A. and Tiemann, M. and Austermeier, Laura and Fitze, M. and Chen, M. and Jakob, F. and Heim, H.-P- and Wu, T. and et al.}, year={2020} }
LibreCat
2020 | Conference Paper | LibreCat-ID: 24247
@inproceedings{Moritzer_Hillemeyer_2020, title={Material Specific Predicting of the Optimal Joining Parameters for the Screw Blind Rivet Joining Process}, booktitle={73rd Annual Assembly of International Institute of Welding (IIW) and International Conference}, author={Moritzer, Elmar and Hillemeyer, Johannes}, year={2020} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25517
@inproceedings{Stüker_Schöppner_2019, title={Einfluss unterschiedlicher Temperatureinstellungen und Schneckengeometrien auf die thermische Homogenität und das Prozessverhalten von schnelllaufenden Kautschukextrudern}, author={Stüker, Daniel and Schöppner, Volker}, year={2019} }
LibreCat
2019 | Conference (Editor) | LibreCat-ID: 25580
@book{Moritzer_Budde_Hüttner_Krassmann_2019, title={Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25582
@inproceedings{Moritzer_Krassmann_2019, title={Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen}, author={Moritzer, Elmar and Krassmann, Dimitri}, year={2019} }
LibreCat
2019 | Conference (Editor) | LibreCat-ID: 25583
@book{Moritzer_Krassmann_2019, title={Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen}, year={2019} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25608
@article{Moritzer_Wortmann_Frese_Sabantina_Petkau_Kinzel_Golzhauser_Husgen_Ehrmann_2019, title={New Polymers for Needleless Electrospinning from Low-Toxic Solvents}, number={952}, journal={NANOMATERIALS}, author={Moritzer, Elmar and Wortmann, M. and Frese, N. and Sabantina, L. and Petkau, R. and Kinzel, F. and Golzhauser, A. and Husgen, B. and Ehrmann, A.}, year={2019} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25610
@article{Moritzer_Wortmann_Hoffmann_Frese_Heide_Brikmann_Brandt_Menzel_Gölzhäuser_Häsgen_2019, title={Advanced output of silicone molds in vacuum casting processes by polyamide 12 powder supplementation}, number={58}, journal={POLYMER-PLASTICS TECHNOLOGY AND MATERIALS}, author={Moritzer, Elmar and Wortmann, M. and Hoffmann, A. and Frese, N. and Heide, A. and Brikmann, J. and Brandt, N. and Menzel, M. and Gölzhäuser, A. and Häsgen, B.}, year={2019}, pages={1937–1943} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25611
@inproceedings{Moritzer_Hüttner_Henning_Webesen_Woitschek_2019, place={Rostock (Deutschland)}, title={Akustische Charakterisierung der mechanischen Eigenschaften künstlich gealterter Polymere}, booktitle={45. Deutsche Jahrestagung für Akustik - DAGA}, author={Moritzer, Elmar and Hüttner, M. and Henning, M. and Webesen, M. and Woitschek, F.}, year={2019}, pages={505–508} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25613
@inproceedings{Moritzer_Westhues_2019, place={Chemnitz (Deutschland)}, title={Analyse von Wirrmattenstrukturen hinsichtlich der Substitutionsfähigkeit von Schaumstoffen in Polstern und Matratzen}, booktitle={26. Fachtagung über die Verarbeitung und Anwendung von Polymere}, author={Moritzer, Elmar and Westhues, T.}, year={2019}, pages={S. 74} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25617
@inproceedings{Schöppner_Sporkmann_2019, place={Cesme (Türkei)}, title={Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation}, booktitle={35th International Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker and Sporkmann, F.}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25621
@inproceedings{Moritzer_Hirsch_2019, place={Lennestadt (Deutschland)}, title={Charakterisierung des Arburg Kunststoff Freiformens}, booktitle={ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design und Fertigung}, author={Moritzer, Elmar and Hirsch, André}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25622
@inproceedings{Schöppner_Dörner_2019, place={Detroit (USA)}, title={COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS}, booktitle={77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Schöppner, Volker and Dörner, M.}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25623
@inproceedings{Schöppner_Resonnek_2019, place={Detroit (USA)}, title={DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC}, booktitle={77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Schöppner, Volker and Resonnek, V.}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25624
@inproceedings{Moritzer_Jilg_2019, place={Detroit (USA)}, title={Determining the degree of agglomeration of solid additives while using inline injection molding compounding (IIMC)}, booktitle={77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Moritzer, Elmar and Jilg, J.}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25626
@inproceedings{Moritzer_Hillemeyer_2019, place={Braunschweig (Deutschland)}, title={Direktverschraubung additiv gefertigter Kunststoffbauteile}, booktitle={9. Fügetechnisches Gemeinschaftskolloquium}, author={Moritzer, Elmar and Hillemeyer, Johannes}, year={2019} }
LibreCat
2019 | Book | LibreCat-ID: 25627
@book{Schöppner_Westhues_2019, place={Chemnitz (Deutschland)}, series={Technomer }, title={Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern}, author={Schöppner, Volker and Westhues, K.}, year={2019}, collection={Technomer } }
LibreCat
2019 | Journal Article | LibreCat-ID: 25628
@article{Schöppner_Walter_2019, title={Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 1}, journal={GAK-Gummi Fasern Kunststoffe}, author={Schöppner, Volker and Walter, J.}, year={2019}, pages={S. 152-159} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25629
@article{Schöppner_Walter_2019, title={Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 2}, journal={GAK Gummi Faser Kunststoffe}, author={Schöppner, Volker and Walter, J.}, year={2019}, pages={206–213} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25630
@inproceedings{Moritzer_Hillemeyer_2019, place={Detroit (USA)}, title={Experimental Determination of Reduction Factors for Dimensioning the Shear Tensil Strength of the Screw Blind Riveting}, booktitle={77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Moritzer, Elmar and Hillemeyer, Johannes}, year={2019} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25631
@article{Moritzer_Hillemeyer_2019, title={Experimental Investigations Into the Dimensioning of the Static Pull-Out Strength of the Screw Blind Rivet}, journal={Joining Plastics}, author={Moritzer, Elmar and Hillemeyer, Johannes}, year={2019}, pages={40–46} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25633
@article{Schöppner_Resonnek_2019, title={Extruder optimier dich!}, journal={Kunstsstoffe}, author={Schöppner, Volker and Resonnek, V.}, year={2019}, pages={56–61} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25634
@inproceedings{Schöppner_2019, place={Paderborn (Deutschland)}, title={Grundlagen der Haftung in der Grenzfläche beim Kunststoffschweißprozess}, booktitle={VDI Wissensforum - Schweißen von Kunststoffen}, author={Schöppner, Volker}, year={2019} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25635
@article{Moritzer_Wortmann_Frese_Hes_Golzhauser_Ehrmann_2019, title={Improved abrasion resistance of textile fabrics due to polymer coatings}, number={49}, journal={JOURNAL OF INDUSTRIAL TEXTILES}, author={Moritzer, Elmar and Wortmann, M. and Frese, N. and Hes, L. and Golzhauser, A. and Ehrmann, A.}, year={2019}, pages={572–583} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25636
@inproceedings{Moritzer_Netzband_Ujma_2019, place={Aachen (Deutschland)}, title={Influences on structural intensity for injection mouldet thermoplastic parts}, booktitle={23rd International Congress on Acoustics}, author={Moritzer, Elmar and Netzband, Dennis and Ujma, Andreas }, year={2019} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25637
@article{Moritzer_Mühlhoff_Nordmeyer_Böhnke_Krampe_Asad_2019, title={Inline-Oberflächenaktivierung mittels Plasma für das 2K-Spritzgießen}, journal={Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Nordmeyer, T. and Böhnke, B. and Krampe, E. and Asad, S.}, year={2019}, pages={54–59} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 24319
@inproceedings{Malatyali_Schöppner_2019, place={Chemnitz}, title={Untersuchung des Dosierverhaltens von Carbonfaserrezyklaten für den Einsatz im gleichläufigen Doppel-schneckenextruder}, booktitle={27. Fachtagung Technomer}, author={Malatyali, Hatice and Schöppner, Volker}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 24326
@inproceedings{Vogtschmidt_Schöppner_2019, place={Bratislava}, title={Vibration welding of components with angled areas in the direction of vibration}, author={Vogtschmidt, Sascha and Schöppner, Volker}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25638
@inproceedings{Moritzer_Mühlhoff_Nordmeyer_Böhnke_Krampe_Asad_2019, place={Steinhagen (Deutschland)}, title={InMould-Plasma}, booktitle={Eröffnung Plasma-Campus bei Plasmatreat GmbH}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Nordmeyer, T. and Böhnke, Birte and Krampe, Erhard and Asad, Salman}, year={2019} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25639
@article{Moritzer_Jilg_Sibbe_2019, title={Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU)}, journal={PU MAGAZIN - International}, author={Moritzer, Elmar and Jilg, J. and Sibbe, N.}, year={2019}, pages={320–324} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25640
@article{Moritzer_Jilg_Sibbe_2019, title={Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU)}, number={4}, journal={TPE Magazine international}, author={Moritzer, Elmar and Jilg, J. and Sibbe, N.}, year={2019}, pages={230–234} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25689
@inproceedings{Moritzer_Hüttner_Krassmann_Wittke_2019, place={Dresden (Deutschland)}, title={Lebensdauer von Composites und Composite-Metall-Hybridverbindungen}, booktitle={Werkstoffwoche}, author={Moritzer, Elmar and Hüttner, Matthias and Krassmann, Dimitri and Wittke, Marius}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25736
@inproceedings{Schöppner_Bayazian_Yadegari_2019, place={Detroit (USA)}, title={Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters}, booktitle={77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Schöppner, Volker and Bayazian, H. and Yadegari, Ali }, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25737
@inproceedings{Schöppner_Sporkmann_Heide_2019, place={Cesme (Türkei)}, title={New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method}, booktitle={35th International Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker and Sporkmann, F. and Heide, Alexander }, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25738
@inproceedings{Moritzer_Budde_Hüttner_Krassmann_2019, title={Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen}, booktitle={9. Fügetechnisches Gemeinschaftskolloquium}, author={Moritzer, Elmar and Budde, Christopher and Hüttner, Matthias and Krassmann, Dimitri}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25745
@inproceedings{Moritzer_Hirsch_2019, place={Paderborn (Deutschland)}, title={Oberflächennachbearbeitung und Kleben von FDM-Bauteilen}, booktitle={DGM-Seminar für Fortgeschrittene}, author={Moritzer, Elmar and Hirsch, André}, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25746
@inproceedings{Schöppner_Bayazian_Yadegari_Haddad_2019, place={Cesme-Izmir (Türkei)}, title={Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters}, booktitle={35th PPS}, author={Schöppner, Volker and Bayazian, H. and Yadegari, Ali and Haddad, Hoda }, year={2019} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25747
@inproceedings{Moritzer_Westhues_2019, place={Cesme-Izmir (Türkei)}, title={Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer}, booktitle={35th PPS}, author={Moritzer, Elmar and Westhues, T.}, year={2019} }
LibreCat
2019 | Journal Article | LibreCat-ID: 25748
@article{Moritzer_Hirsch_Heim_Cherif_Truemper_2019, title={Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites}, journal={Welding in the World}, author={Moritzer, Elmar and Hirsch, André and Heim, H.-P. and Cherif, C. and Truemper, W.}, year={2019}, pages={867–873} }
LibreCat
2019 | Conference Paper | LibreCat-ID: 25750
@inproceedings{Schöppner_Sporkmann_2019, place={Stuttgart (Deutschland)}, title={Scale up von Doppelschneckenmaschinen}, booktitle={VDI Wissensforum}, author={Schöppner, Volker and Sporkmann, F.}, year={2019} }
LibreCat
2019 | Book | LibreCat-ID: 25751
@book{Schöppner_Meilwes_Westhues_2019, place={Chemnitz (Deutschland)}, series={Technomer }, title={Schmelzefilter}, author={Schöppner, Volker and Meilwes, P. and Westhues, K.}, year={2019}, collection={Technomer } }
LibreCat
2019 | Journal Article | LibreCat-ID: 25753
@article{Schöppner_Sporkmann_2019, title={Simulation aids compounding success}, journal={Compounding World}, author={Schöppner, Volker and Sporkmann, F.}, year={2019}, pages={47–56} }
LibreCat