Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
599 Publications
2022 | Conference Paper | LibreCat-ID: 34738
V. Schöppner et al., “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” presented at the 31. Internationales Kolloquium Kunststofftechnik, Aachen, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34735
V. Schöppner and F. Brüning, “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34734
V. Schöppner and J. Köllermeier, “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34737
V. Schöppner and M. Frank, “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34740
V. Schöppner, M. Altepeter, and S. Wanke, “Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34752
V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen,” GAK, 2022.
LibreCat
2022 | Report | LibreCat-ID: 34741
E. Moritzer, M. Kröker, and M. Scholle, Rückführung zerkleinerter Organobleche. 2022.
LibreCat
2022 | Report | LibreCat-ID: 34746
M. Hopp and L. Tölle, Teilchen-Kunde - Stäube beim mechanischen Recycling faserverstärkter Thermoplaste. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34751
C. W. T. Schall, “Vorteilhaftes Prozessverhalten von Wave-Schnecken,” presented at the 18. Duisburger Extrusionstagung, Duisburg, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34725
E. Moritzer and C. Held, “Characterization of additively manufactured plastic components for direct screwing,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33291
E. Moritzer and D. Rauen, “Plasmaaktivierung fehlgeschlagen!,” Kunststoffe, pp. 79–81, 2022.
LibreCat
2022 | Report | LibreCat-ID: 33070
A. Fuhrmann et al., Verbessertes Füllverhalten im Spritzgießprozess durch Schäumen von WPC: Bewertung des Fließverhaltens treibmittelbeladener Polymerschmelzen. Shaker, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33288
E. Moritzer and F. I. Bürenhaus, “Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka (Japan), 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33286
M. Hopp et al., “Characterization of Fiber Dust Resulting from Recycling of Carbon Fiber-Reinforced Thermoplastics (CFRP) and Their Cell Toxicity,” Journal of Material Science and Chemical Engineering, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33290
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Multimaterial Injection Moulding of Thermosets and Elastomers,” presented at the ScienceBG, Burgas (Bulgaria), 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33292
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Spritzgießen hochtemperaturbeständiger Baugruppen aus Duromeren und Elastomeren,” Kunststoffland NRW, pp. 34–35, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33296
E. Moritzer, D. Netzband, and A. Ujma, “Messtechnische Ermittlung der Strukurintensität bei spritzgegossenen, faserverstärkten Kunststoffen,” 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33859
E. Moritzer and C. L. Elsner, “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100390.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33861
E. Moritzer and J. Wächter, “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100389.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33988
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, Art. no. 2100396, 2022, doi: 10.1002/masy.202100396.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 33987
E. Moritzer and C. L. Elsner, “Mit Gestaltungsrichtlinien zum Erfolg,” Kunststoffe, vol. 11/2022, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34744
M. Hopp and L. Schäffer, “Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33287
E. Moritzer, C. Held, and J. Hillemeyer, “Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS,” Joining Plastic, pp. 84–90, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 33289
E. Moritzer, C. Held, C. Hopmann, and M. Kramer, “Mit der richtigen Auslegung zur sicheren Verbindung,” Kunststoffe, pp. 30–33, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34728
E. Moritzer, D. Rauen, C. Schilp, and M. Scholle, “Die Vielseitigkeit von Beschichtungen im Spritzgießwerkzeug- und Formenbau,” Zeitschrift Kunststofftechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33862
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34727
V. Schöppner, J. Köllermeier, G. Hiesgen, and J. Trippe, “Development of Simulation Based Assistant Systems for Automatic Process Monitoring and Derivation of Recommendations to Optimize a Profile Extrusion Line,” presented at the 2nd International Symposium on Plastics Technology, Aachen, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34720
V. Schöppner and J. Köllermeier, “Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34726
V. Schöppner and J. Köllermeier, “Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles,” presented at the Annual Conference of the Society of Plastics Engineers (ANTEC 2022), Charlotte, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37635
M. Dörner, Wave-Schnecken in der Einschneckenextrusion. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37639
L. R. Helmlinger, Untersuchungen zur werkstofflichen Aufbereitung von Post-Consumer-Kunststoffabfällen und Entwicklung eines neuen Aufbereitungsverfahrens. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37638
F. M. Mühlhoff, Ein Beitrag zur InMould-Plasma Technologie zur Oberflächenvorbehandlung im Mehrkomponentenspritzgießwerkzeug. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37637
M. O. Bialaschik, Ein Beitrag zum Warmgasstumpfschweißen von Kunststoffen. 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 37636
H. Malatyali, Modellierung der Carbonfaserlängenverkürzung. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33856 | 
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science, vol. 6, no. 10, Art. no. 321, 2022, doi: 10.3390/jcs6100321.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29948
F. Brüning and V. Schöppner, “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders,” Polymers 14, 2022, doi: https://doi.org/10.3390/polym14020256.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34708
V. Schöppner, K. Gevers, A. Tornede, M. Wever, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,” Welding in the World, p. 14, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34739
E. Moritzer, C. Held, and J. Hillemeyer, “Material-specific prediction of the optimal joinig parameters for the screw blind rivet joining process,” Welding in the World, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 48360
M. Hopp and L. Tölle, “EFFECT OF SHREDDING PARAMETERS ON THE FORMATION OF AIRBORNE FIBER DUST DURING MECHANICAL RECYCLING OF FIBER-REINFORCED THERMOPLASTICS,” Proceedings of the 20th European Conference on Composite Materials, no. Vol. 6, pp. 119–125, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 48354
E. Moritzer and J. Wächter, “Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process,” presented at the 37th International Conference of the Polymer Processing Society, Fukuoka (Japan), 2022.
LibreCat
2022 | Book | LibreCat-ID: 48353
K. Gevers, L. Schraa, K. Uhlig, P. Töws, and M. Stommel, Bewertung von IR-Schweißverbindungen an kurzfaserverstärkten Thermoplasten mittels digitaler Bildkorrelation, vol. Tagung Werkstoffprüfung 2022-Werkstoffe und Bauteile auf dem Prüfstand. 2022, pp. 169–175.
LibreCat
2022 | Book | LibreCat-ID: 48356
V. Schöppner and S. Vogtschmidt, Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Koblenz, 2022, pp. 534–540.
LibreCat
2022 | Book | LibreCat-ID: 48358
V. Schöppner, M. Dörner, M. Frank, and C. Schall, On the Wave to Successful Mixing. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,” Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi: 10.3390/polym14153113.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33852 |
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 44302
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science , 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33853 |
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, vol. 24. Düren: Shaker Verlag, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 25518
D. Stüker and V. Schöppner, “Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25519
D. Stüker and V. Schöppner, “Non-Isothermal Calculation of the Pressure-Throughput-Characteristics of Single Screw Melt-Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25576
E. Moritzer, D. Krassmann, and J. Brikmann, “Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting,” presented at the 74th Annual Assembly of the International Institute of Welding (IIW), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 25577
E. Moritzer, D. Krassmann, and J. Brikmann, “Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten,” Joining Plastics, vol. 15, no. 3–4, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24095 |
E. Moritzer, F. Hecker, and A. Hirsch, “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen,” Kunststoffland NRW report, vol. 2021, no. 2, pp. 42–43, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24161
E. Moritzer and M. Kröker, “Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen,” CU reports, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24165
E. Moritzer and M. Kröker, “Simulative analysis of the filling process in the 2K GITBlow process on organo sheets,” presented at the SPE Antec 2021, Digital, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24168
E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24283
H. Malatyali, V. Schöppner, N. Rabeneck, F. Hanselle, L. Austermeier, and D. Karch, “A model for the carbon fiber breakage along the twin‐screw extruder,” SPE Polymers, pp. 145–152, 2021, doi: 10.1002/pls2.10040.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24315
H. Malatyali, V. Schöppner, E. Lochbaum, I. Bomm, and F. Hanselle, “The Influence of Process Conditions on the Fiber Length Reduction for Recycled Carbon Fibers,” presented at the The Annual Technical Conference of the Society of Plastics Engineers (ANTEC), , USA, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24316
H. Malatyali, V. Schöppner, S. A. Akar, F. Hanselle, and L. Austermeier, “Reproducibility analysis of fiber length measurements during processing with twin screw extruders,” presented at the The Annual Technical Conference of the Society of Plastics Engineers (ANTEC) , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
K. Gevers, V. Schöppner, and E. Hüllermeier, “Heated tool butt welding of two different materials – Established methods versus artificial intelligence,” presented at the International Institute of Welding, online, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
T. Arndt and V. Schöppner, “Development of scale up rules for quasi-simultaneous laser transmission welding of thermoplastics,” presented at the International institute of welding, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24441
M. Frank and V. Schöppner, “DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24528
M. Hopp and F. M. Mühlhoff, “Separation of Multi-Component Parts for Mechanical Recycling – An Approach to Produce Hard-Soft Combinations with a Better Recyclability,” 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
E. Moritzer, F. Hecker, and A. Hirsch, “Kleine Tropfen, große Wirkung,” Kunststoffe, no. 9/2021, pp. 88–90, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26628
H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw extruders using CFD simulations,” presented at the 36th International conference of the polymer processing society, Montreal , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26629
H. Malatyali, V. Schöppner, and T. Hoemann, “Investigation of the influence of process and screw configurations on fiber length distribution for recycled carbon fiber,” presented at the 36th International conference of the polymer processing society, Montreal, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26630
M. Altepeter, V. Schöppner, and S. Wanke, “Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 27366
E. Moritzer and F. Hecker, “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen,” Jahresmagazin Kunststofftechnik, pp. 70–75, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 23839
C. Marschik, W. Roland, M. Döner, G. Steinbichler, and V. Schöppner, “A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion,” Polymers, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23851
E. Moritzer and F. I. Bürenhaus, “Influence of Processing Parameters on Fiber Length Degradation during Injection Molding,” in SPE ANTEC 2021 Proceedings, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23977
L. Tölle and M. Hopp , “Recycling faserverstärkter Kunststoffe zu Ende gedacht… ,” Kunststoffland NRW Report , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25283
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming,” presented at the 36th International Conference of the Polymer Processing Society, Montreal, Canada.
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 23948
E. Moritzer, M. Richters, J. Hillemeyer, and D. Krassmann, “Mit dem Schraubblind-Durchsetznieten Metallteile mit Composites bei einseitiger Zugänglichkeit verbinden,” Joining Plastics, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24162
E. Moritzer, J. Wächter, and C. L. Elsner, “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK,” Macromolecular Symposia, vol. 395, no. 1, 2021, doi: 10.1002/masy.202000269.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24681
E. Moritzer and C. Schumacher, “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting,” Macromolecular Symposia, vol. 395, no. 1, Art. no. 2000275, 2021, doi: 10.1002/masy.202000275.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24554
E. Moritzer, C. L. Elsner, J. Wächter, and F. Knoop, “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems,” presented at the 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23867
M. Bialaschik, V. Schöppner, M. Albrecht, and M. Gehde, “Influence of material degradation on weld seam quality in hot gas butt welding of polyamides,” Welding in the World, pp. 1161–1169, 2021, doi: 10.1007/s40194-021-01108-0.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24555
E. Moritzer, C. L. Elsner, and C. Schumacher, “Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters,” Polymer Composites, vol. 42, no. 11, pp. 6065–6079, 2021, doi: 10.1002/pc.26285.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 31744
E. Moritzer, J. Hillemeyer, M. Kramer, and C. Hopmann, “Designing of thermosetting plastic components for direct screwing - Auslegung von Duroplastbauteilen zur Direktverschraubung,” Joining Plastics, pp. 94–103, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31740
E. Moritzer and M. Richters, “ Characterization of wood-filled thermoplastic polyurethanes for the injection molding process,” Journal of Applied Polymer Science, vol. 138, no. 38, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31760
E. Moritzer, D. Krassmann, and J. Brikmann, “Entwicklung der Spritzniettechnik als werkstoffgerechtes Fügeverfahren für hybride Strukturen,” presented at the 11. Fügetechnisches Gemeinschaftskolloquium, Dresden, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31762
E. Moritzer, J. Jilg, and T. Rücker, “Er kommt auf die Korngröße an, Mikrogranulat verbessert die Verteilung feindisperser Füllstoffe in der Direktcompoundierung,” Kunststoffe, pp. 24–27, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31758
V. Schöppner and J. H. Martens, “Eine runde Sache,” Kunststoffe, pp. 91–93, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31767
M. Hopp and L. Tölle, “Influence of Fiber Content on the Fiber Dust Formation During Shredding for Mechanical Recycling of Different Glass and Carbon Fiber Reinforced Thermoplastics,” presented at the 36th International Conference of Polymer Processing Society (PPS), 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31765
E. Moritzer, J. Hillemeyer, and R. Lotzin, “Fügeelement angespritzt - Einfluss auf die Verbundfestigkeit zwischen Organoblech und Schraubblindniet untersucht,” Kunststoffe, pp. 42–45, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31763
E. Moritzer, M. Wortmann, P. Krieger, B. Hüsgen, and N. Frese, “Effect of Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers in Polyurethane Vacuum Casting,” ACS Omega, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31774
E. Moritzer, J. Wächter, and C. Fuhrmann, “ INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR,” in 23rd International Conference Materials, Burgas (Bulgarien), 2021, pp. 58–67.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31776
V. Schöppner and K. Gevers, “ Lebensdauer vorhersagen?,” K-Zeitung, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31775
E. Moritzer, “ Kühlen mit dem Wärmerohr,” Kunststoffe, pp. 64–67, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31777
V. Schöppner, M. Altepeter, and S. Wanke, “Material Degradation of Polypropylene on the Co-Rotating Twin Screw Extruder,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Melbourne (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31781
E. Moritzer and F. I. Bürenhaus, “Untersuchung der Faserlängenabnahme von kurz- und langglasfaserverstärk-ten Thermoplasten im Spritzgießprozess,” presented at the 27. Techomer - Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Online), 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31778
E. Moritzer, J. Hillemeyer, and R. Lotzin, “Molding on a Joining Element - Study of the Factors Influencing the Strength of the Bond between a Thermoplastic Composite and a Screw-in Blind Rivet,” Kunststoffe International, pp. 29–32, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31779
M. Hopp, L. Tölle, and T. Hoemann, “Reduzierung der Faserstaubentstehung beim mechanischen Recycling - Zerkleinern von carbonfaserverstärkten Polycarbonaten mit unterschiedlichen Verstärkungsformen,” Gummi Fasern Kunststoffe, pp. 2–7, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31780
E. Moritzer, M. Wortmann, N. Frese, J. Brinkmann, A. Ehrmann, and B. Hüsgen, “Silicone Mold Accuracy in Polyurethane Vacuum Casting,” Macromolecular Symposia, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31782
V. Schöppner and D. Kleinschmidt, “Viskoelastische Materialmodellierung in Strömungssimulationen,” presented at the 27. Techomer - Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Online) , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31785
V. Schöppner, M. Albrecht, M. Gehde, and M. O. Bialaschik, “Warmgasstumpfschweißen - Einfluss des Werkzeugdesigns und des verwendeten Prozessgases auf das Erwärm- und Schweißverhalten,” presented at the Technomer, Chemnitz (Deutschland), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31784
V. Schöppner, M. Dörner, and C. W. T. Schall, “Vorteilhaftes Prozessverhalten von Wave-Schnecken in der Einschneckenextrusion,” presented at the Technomer 2021, Chemnitz, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31786
V. Schöppner, M. O. Bialaschik, M. Albrecht, and M. Gehde, “Warmgasstumpfschweißen von Kunststoffen,” Joining Plastics, pp. 162–169, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 31771
E. Moritzer and F. I. Bürenhaus, “Investigation of Fiber Orientation and its Influence on Fiber Length Degradation in Simple Shear Flow for Glass Fiber Reinforced Polypropylene,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montréal (Kanada), 2021.
LibreCat