Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

222 Publications


2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22043
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22046
F. Knoop and V. Schöppner, “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process,” in SPE ANTEC 2018, 2018, vol. 1, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 

2017 | Book Chapter | LibreCat-ID: 23759
D. Menge, S. Josupeit, P. Delfs, and H.-J. Schmid, “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, H. A. Richard, B. Schramm, and T. Zipsner, Eds. Wiesbaden: Springer Vieweg, 2017, pp. 105–120.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22165
M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting,” Materials and Corrosion, vol. 68, no. 10, pp. 1028–1036, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22195
S. Josupeit and H.-J. Schmid, “Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories,” Journal of Applied Polymer Science, vol. 134, no. 42, 2017.
LibreCat | DOI
 

2017 | Book | LibreCat-ID: 22419
T. Künneke and D. Zimmer, Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22420
S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 80–93.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22421
T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21690
G. Deppe, R. Koch, and M. Kaesberg, “Rational Decision-Making for the Beneficial Application of Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2597–2611.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21691
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21692
A. Kruse, T. Reiher, and R. Koch, “Integrating AM into existing companies - selection of existing parts for increase of acceptance,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2575–2584.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21693
U. Jahnke, R. Koch, and A. T. Oppermann, “Design for protection: Systematic approach to prevent product piracy during product development using AM ,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2481–2492.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21694
J. Büsching and R. Koch, “Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2585–2596.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21695
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21697
G. Deppe and C. Lindemann, “Hybrid Manufacturing with Additive Manufacturing,” CECIMO Magazine, vol. 17, no. 11, pp. 28–29, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21704
T. Reiher, C. Lindemann, U. Jahnke, G. Deppe, and R. Koch, “Holistic approach for industrializing AM technology - from part selection to test and verification,” Progress in Additive Manufacturing, vol. 2, pp. 43–55, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22042
C. Schumacher, V. Schöppner, and J. Guntermann, “Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 470–484, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22045
F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22049
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, vol. 1, no. 1, pp. 108–114, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22038
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, vol. 8, no. 246, 2017, doi: 10.3390/mi8080246.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22033
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), pp. 563–568, 2017, doi: 10.1007/s11837-016-2197-2.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22023
F. Knoop, A. Kloke, and V. Schöppner, “Quality Improvement of FDM Parts by Parameter Optimization ,” in 32nd International Conference of the Polymer Processing Society, 2017, vol. 32, doi: 10.1063/1.5016790.
LibreCat | DOI
 

2016 | Dissertation | LibreCat-ID: 24774
A. Kloke, Untersuchung der Werkstoff-, Prozess- und Bauteileigenschaften beim Fused Deposition Modeling Verfahren, vol. 4. Düren: Shaker Verlag, 2016.
LibreCat | Download (ext.)
 

2016 | Dissertation | LibreCat-ID: 24897
S. Leuders, Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen, vol. 5. Düren: Düren Verlag GmbH, 2016.
LibreCat | Files available
 

2016 | Conference Paper | LibreCat-ID: 22180
S. Josupeit, P. Delfs, D. Menge, and H.-J. Schmid, “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2077–2086.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22185
P. Delfs, M. Tows, and H.-J. Schmid, “Optimized build orientation of additive manufactured parts for improved surface quality and build time,” Additive Manufacturing, vol. 2, no. 12, Part B, pp. 214–320, 2016.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22190
P. Delfs and H.-J. Schmid, “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts ,” in Fraunhofer Direct Digital Manufacturing Conference, 2016, vol. 3, pp. 411–414.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22194
S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for application in laser sintering,” in International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22200
S. Josupeit et al., “Dimensional accuracy of polymer laser sintered parts: Influences and measures,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22403
T. Künneke and D. Zimmer, “Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen,” in DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2016, pp. 151–160.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22404
S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22409
T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22410
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in ASPE Spring Topical Meeting, 2016, p. S.3-8.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22412
T. Lieneke, V. Denzer, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling,” in CAT 2016, 2016, vol. 43, pp. 286–291.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21687
G. Deppe and R. Koch, “Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 81–92.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21688
T. Reiher and R. Koch, “Product optimization with and for Additive Manufacturing,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2236–2249.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21689
C. Lindemann and R. Koch, “Cost Efficient Design and Planning for Additive Manufacturing Technologies,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 93–112.
LibreCat | DOI
 

2016 | Book | LibreCat-ID: 21698
C. Lindemann, G. Deppe, and R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat
 

2016 | Book | LibreCat-ID: 21699
U. Jahnke and R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 21702
T. Reiher, G. Deppe, and R. Koch, “Combining material efficiency and part reliability by product optimization applying additive manufacturing,” in International Conference Production Engineering and Management 2016, 2016, vol. 6, pp. 27–38.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21705
G. Deppe and R. Koch, “Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung,” in Rapid Tech 2016, 2016, vol. 13, pp. 349–360.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21997
I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, and T. Reiher, “Data Management for additive manufacturing: survey on requirements and current state,” in 14th International DESIGN Conference 2016, 2016, vol. 14.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22019
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi: 10.1007/s11837-016-2197-2.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22039
M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 121–133, doi: 10.3139/9783446450608.010.
LibreCat | DOI
 

2015 | Dissertation | LibreCat-ID: 24751
S. Rüsenberg, Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, vol. Band, 2. Düren: Shaker Verlag GmbH, 2015.
LibreCat | Download (ext.)
 

2015 | Conference Paper | LibreCat-ID: 22166
E. Klemp, “Industrial applications in AM - aerospace and overhaul,” in ASME AM3D Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22168
E. Klemp, “Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen,” in Generatives Fertigen und 3D-Drucken: Industrielle Revolution oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22169
E. Klemp, “Möglichkeiten, Chancen und Mythen additiver Fertigung,” in Hanse-Aerospace-Themennachmittag im Hause SLM, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22170
E. Klemp, “Additive Manufacturing - Potenziale, Zukunftschancen und Hürden,” in Messe Interzum, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22171
E. Klemp, “Technology Update 2015 for Metals,” in SLM-Usermeeting, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22172
E. Klemp, “AM-Verfahren - Möglichkeiten in der industriellen Fertigung,” in VDMA - Symposium auf der Hannover Messe Industrie, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22178
P. Delfs, Z. Li, and H.-J. Schmid, “Mass finishing of laser sintered parts,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 514–526.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22179
S. Josupeit and H.-J. Schmid, “Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 190–199.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22187
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid, “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 540–549.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22189
P. Delfs, M. Toews, and H.-J. Schmid, “Surface roughness optimized alignment of parts for additive manufacturing processes,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1334–1344.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22199
S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates,” in Proceedings of the Rapid Tech 2015, 2015, pp. 63–78.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 22394
G. dell’Aere and D. Zimmer, “On design for Additive Manufacturing - evaluating geometrical limitations,” Rapid Prototyping Journal, vol. 21, no. 6, pp. 662–670, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22395
T. Lieneke et al., “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Proceedings of the Rapid Tech 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22396
T. Lieneke et al., “Systematical determination of tolerances for additive manufacturing by measuring linear dimensions,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 371–384.
LibreCat | DOI
 

2015 | Dissertation | LibreCat-ID: 22397
G. Adam, Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling. Shaker Verlag, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22398
G. Adam, “On tolerances for additive manufacturing,” in Inside 3D Printing Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22399
T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22400
T. Lieneke, “Systematical determination of dimensional tolerances for additive manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 21683
C. Lindemann, U. Jahnke, T. Reiher, and R. Koch, “Towards a sustainable and economic selection of part candidates for Additive Manufacturing,” in Rapid Prototyping Journal, 2015, vol. 21, no. 2, pp. 216–227.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21684
G. Deppe, C. Lindemann, and R. Koch, “Developement of an economic decision support for the application of Additive Manufacturing in aerospace,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1560–1563.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21685
U. Jahnke, J. Büsching, T. Reiher, and R. Koch, “Protection measures against product piracy and application by the use of AM,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1601–1611.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21686
T. Reiher and R. Koch, “FE-Optimization and data handling for Additive Manufacturing of structural parts,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1092–1103.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21700
U. Jahnke and C. Lindemann, “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy,” in Inside 3D Printing Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 21701
G. Deppe, T. Reiher, and R. Koch, “Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing,” in International Conference Production Engineering and Management 2015, 2015, vol. 5, pp. 219–230.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21703
C. Lindemann, T. Reiher, and R. Koch, “Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing,” in Paris Space Week, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22031
F. Knoop and V. Schöppner, “Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30,” in ASPE Spring Topical Meeting, 2015, pp. 26–31, doi: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22044
F. Knoop and V. Schöppner, “Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 935–948, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22176
P. Delfs, A. A. Herale, Z. Li, and H.-J. Schmid, “Simulation of the Surface Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22177
S. Josupeit and H.-J. Schmid, “Three-dimensional in-process temperature measurement of laser sintered part cakes,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 49–58.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22184
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, and H.-J. Schmid, “Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics,” in 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, vol. 72, no. 3, pp. 2383–2385.
LibreCat | DOI
 

2014 | Journal Article | LibreCat-ID: 22186
S. Rüsenberg, S. Josupeit, and H.-J. Schmid, “A method to characterize the quality of a polymer laser sintering process ,” Advances in Mechanical Engineering, vol. 6, pp. 1687–8140, 2014.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22193
S. Josupeit, L. Ordia, and H.-J. Schmid, “Development of a Basic Model to Simulate the Laser Sintering Cooling Process,” in International Conference on Additive Technologies, 2014, vol. 5, pp. 222–227.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22203
P. Delfs and H.-J. Schmid, “Simulation of the Surface Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22382
G. Adam and D. Zimmer, “Extension of prior developed design rules (LS),” in ASPE - Spring topical meeting 2014, 2014.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22383
G. Adam and D. Zimmer, “Systematic investigations of minimum feature sizes and geometrical accuracies,” 2014.
LibreCat
 

2014 | Journal Article | LibreCat-ID: 22384
G. Adam and D. Zimmer, “Design for Additive Manufacturing - Element transitions and aggregated structures,” CIRP Journal of Manufacturing Science and Technology, vol. 7, no. 1, pp. 20–28, 2014.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22385
G. Adam, “Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern,” 2014.
LibreCat
 

2014 | Conference Paper | LibreCat-ID: 22386
G. Adam, “Extension of prior developed design rules for laser sintering,” 2014.
LibreCat
 

2014 | Journal Article | LibreCat-ID: 21706
G. Deppe and R. Koch, “Exploring the influence of an Additive Manufacturing integration on future MRO processes in aeronautics,” Rtejournal, vol. 2014, no. 11, 2014.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22018
M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 923–934, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22030
M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling,” in ANTEC, 2014, pp. 2331–2336.
LibreCat
 

2014 | Conference Paper | LibreCat-ID: 22021
A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling,” in 29th International Conference of the Polymer Processing Society, 2014, vol. 29, pp. 696–701, doi: 10.1063/1.4873874.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22175
S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “A material-based quality concept for polymer laser sintering,” in 24th Annual International Solid Freeform Fabrication Symposium , 2013, vol. 24, pp. 44–54.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22192
S. Rüsenberg and H.-J. Schmid, “Advanced characterization method of Nylon 12 materials for application in laser sinter processing,” in International Conference of the Polymer-Processing-Society (PPS), 2013, vol. 29.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22197
S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien,” in Merseburger Rapid Prototyping Forum, 2013, vol. 7.
LibreCat | DOI
 

Filters and Search Terms

department=624

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed