Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
222 Publications
2022 | Newspaper Article | LibreCat-ID: 33987
E. Moritzer and C. L. Elsner, “Mit Gestaltungsrichtlinien zum Erfolg,” Kunststoffe, vol. 11/2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33862
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30228
S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi: https://doi.org/10.1007/s11837-021-05042-w .
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33356 | 
S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 31871
I. Kletetzka and S. H. Klippstein, “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag),” presented at the 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben, Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43011
F. P. Hanselle, Untersuchung und Modellierung der Materialeigenschaften von glaskugelgefüllten, im Lasersinterprozess verarbeiteten Dry-Blends. 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43010
M. Kosanke, Oberflächenmodifikation von Glaskugeln zur Verbesserung der Adhäsion im Lasersinterverfahren. Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43007
F. Henke, Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit). Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 46858
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver. 2022.
LibreCat
2022 | Bachelorsthesis | LibreCat-ID: 43012
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft. Paderborn, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33852 |
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30220 |
I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44558.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33853 |
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24760
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, vol. 22. Düren: Shaker Verlag GmbH, 2021.
LibreCat
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, vol. 24. Düren: Shaker Verlag, 2021.
LibreCat
| Download (ext.)
2021 | Newspaper Article | LibreCat-ID: 24095 |
E. Moritzer, F. Hecker, and A. Hirsch, “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen,” Kunststoffland NRW report, vol. 2021, no. 2, pp. 42–43, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24168
E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
E. Moritzer, F. Hecker, and A. Hirsch, “Kleine Tropfen, große Wirkung,” Kunststoffe, no. 9/2021, pp. 88–90, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 27366
E. Moritzer and F. Hecker, “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen,” Jahresmagazin Kunststofftechnik, pp. 70–75, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 27528
T. Künneke and D. Zimmer, “Konstruktionsregeln für additiv gefertigte Partikeldämpfer/Design rules for additive manufactured particle dampers,” Konstruktion, pp. 72–78, 2021, doi: 10.37544/0720-5953-2021-11-12-72.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 23760 |
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 20886
T. Nickchen, S. Heindorf, and G. Engels, “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts,” in Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, Hawaii, 2021, pp. 1994–2002.
LibreCat
2021 | Journal Article | LibreCat-ID: 22447
S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, S. Urbanek, and B. Ponick, “Funktionsoptimierte AM-Gestaltung eines E-Rotors,” antriebstechnik - Zeitschrift für Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen , vol. 60, no. 6, pp. 36–43, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 22495
D. Zimmer, T. Koers, and T. Bührmann, “Zukunftstechnologie und moderne Antriebe kombiniert: AM in modularen Antriebssystemen,” Newsletter der Wissenschaftlichen Gesellschaft für Produktentwicklung, vol. 1, pp. 9–10, 2021.
LibreCat
| Download (ext.)
2021 | Conference Abstract | LibreCat-ID: 30227
S. H. Klippstein, “Online Monitoring des Beschichtungsprozesses im Laser Sintern, Systementwicklung und Einflussanalyse,” presented at the Rudolstädter Kunststofftage 2021, Tudolstadt, 2021.
LibreCat
| Files available
2021 | Conference Paper | LibreCat-ID: 25283
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming,” presented at the 36th International Conference of the Polymer Processing Society, Montreal, Canada.
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 24162
E. Moritzer, J. Wächter, and C. L. Elsner, “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK,” Macromolecular Symposia, vol. 395, no. 1, 2021, doi: 10.1002/masy.202000269.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24681
E. Moritzer and C. Schumacher, “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting,” Macromolecular Symposia, vol. 395, no. 1, Art. no. 2000275, 2021, doi: 10.1002/masy.202000275.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24554
E. Moritzer, C. L. Elsner, J. Wächter, and F. Knoop, “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems,” presented at the 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24555
E. Moritzer, C. L. Elsner, and C. Schumacher, “Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters,” Polymer Composites, vol. 42, no. 11, pp. 6065–6079, 2021, doi: 10.1002/pc.26285.
LibreCat
| DOI
2021 | Mastersthesis | LibreCat-ID: 43005
R. Gawlikowicz, Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit). Paderborn, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24101 |
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 467–474, doi: 10.26153/tsw/17567.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24099 |
E. Moritzer, F. Hecker, C. Driediger, and A. Hirsch, “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 575–584, doi: 10.26153/tsw/17577.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24096 |
E. Moritzer, F. Hecker, and A. Hirsch, “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 1268–1275, doi: 10.26153/tsw/17643.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24160 |
I. Kletetzka, C. Kummert, and H.-J. Schmid, “Laser Sintering Design Guidelines for media transmitting Components,” in Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Austin, 2021, vol. 32, doi: http://dx.doi.org/10.26153/tsw/17548.
LibreCat
| DOI
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24771
F. Knoop, Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren, vol. 18. Düren: Shaker Verlag, 2020.
LibreCat
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24773
M. Fischer, Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte, vol. 17. Düren: Shaker Verlag, 2020.
LibreCat
| Download (ext.)
2020 | Report | LibreCat-ID: 24943
D. Menge, S. H. Klippstein, and H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat
| Download (ext.)
2020 | Conference Abstract | LibreCat-ID: 24478
E. Moritzer and J. Wächter, “From filament production to material qualification for the FDM process,” presented at the Seminar(Thermofisher): Polymer Compounds for 3D filaments – production, quality control and application, Karlsruhe, 2020.
LibreCat
2020 | Report | LibreCat-ID: 24669
T. Lieneke et al., Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren. 2020.
LibreCat
| Files available
2019 | Dissertation | LibreCat-ID: 24752
J. Rohde, Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen, vol. 16. Düren: Shaker Verlag, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24753
S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, vol. 11. Düren: Shaker Verlag GmbH, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24758
J. Lohn, Zum Laserstrahlschmelzen neuer Kunststoffmaterialien, vol. 15. Düren: Shaker Verlag GmbH, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24759
U. Jahnke, Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren, vol. 13. Düren: Shaker Verlag, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24761
T. Reiher, Intelligente Optimierung von Produktgeometrien für die additive Fertigung, vol. 12. Düren: Shaker Verlag, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24762
G. Deppe, Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung, vol. 9. Düren: Shaker Verlag, 2019.
LibreCat
| Download (ext.)
2019 | Report | LibreCat-ID: 24628
D. Menge, R. Walter, H.-J. Schmid, and U. P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, vol. 1338. Frankfurt, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22443
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22444
T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” konstruktionspraxis, vol. 6, pp. 24–26, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22022
E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22047
E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, vol. 63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22028
E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi: 10.1063/1.5088314.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22027
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 22441
S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,” in II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22041
E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22183 |
D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 22196
C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 21999
I. Gräßler, C. Oleff, and P. Scholle, “Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte,” in Design for X - Beiträge zum 29. DfX-Symposium, 2018, vol. 29, pp. 333–344, doi: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22020
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22046
F. Knoop and V. Schöppner, “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process,” in SPE ANTEC 2018, 2018, vol. 1, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat
| DOI
2017 | Book Chapter | LibreCat-ID: 23759
D. Menge, S. Josupeit, P. Delfs, and H.-J. Schmid, “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, H. A. Richard, B. Schramm, and T. Zipsner, Eds. Wiesbaden: Springer Vieweg, 2017, pp. 105–120.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21693
U. Jahnke, R. Koch, and A. T. Oppermann, “Design for protection: Systematic approach to prevent product piracy during product development using AM ,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2481–2492.
LibreCat
| DOI