Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

222 Publications


2020 | Conference Abstract | LibreCat-ID: 24478
E. Moritzer and J. Wächter, “From filament production to material qualification for the FDM process,” presented at the Seminar(Thermofisher): Polymer Compounds for 3D filaments – production, quality control and application, Karlsruhe, 2020.
LibreCat
 

2020 | Report | LibreCat-ID: 24669
T. Lieneke et al., Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren. 2020.
LibreCat | Files available
 

2020 | Book Chapter | LibreCat-ID: 18789
T. Nickchen, G. Engels, and J. Lohn, “Opportunities of 3D Machine Learning for Manufacturability Analysis and Component Recognition in the Additive Manufacturing Process Chain,” in Industrializing Additive Manufacturing, Cham, 2020.
LibreCat | DOI
 

2020 | Conference Paper | LibreCat-ID: 22182
C. Kummert, W. Diekmann, K. Tews, and H.-J. Schmid, “Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens,” in 29th Annual International Solid Freeform Fabrication Symposium, 2020, vol. 29, pp. 735–744.
LibreCat | DOI
 

2019 | Dissertation | LibreCat-ID: 24752
J. Rohde, Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen, vol. 16. Düren: Shaker Verlag, 2019.
LibreCat | Download (ext.)
 

2019 | Dissertation | LibreCat-ID: 24753
S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, vol. 11. Düren: Shaker Verlag GmbH, 2019.
LibreCat | Download (ext.)
 

2019 | Dissertation | LibreCat-ID: 24758
J. Lohn, Zum Laserstrahlschmelzen neuer Kunststoffmaterialien, vol. 15. Düren: Shaker Verlag GmbH, 2019.
LibreCat | Download (ext.)
 

2019 | Dissertation | LibreCat-ID: 24759
U. Jahnke, Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren, vol. 13. Düren: Shaker Verlag, 2019.
LibreCat | Download (ext.)
 

2019 | Dissertation | LibreCat-ID: 24761
T. Reiher, Intelligente Optimierung von Produktgeometrien für die additive Fertigung, vol. 12. Düren: Shaker Verlag, 2019.
LibreCat | Download (ext.)
 

2019 | Dissertation | LibreCat-ID: 24762
G. Deppe, Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung, vol. 9. Düren: Shaker Verlag, 2019.
LibreCat | Download (ext.)
 

2019 | Report | LibreCat-ID: 24628
D. Menge, R. Walter, H.-J. Schmid, and U. P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, vol. 1338. Frankfurt, 2019.
LibreCat
 

2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22443
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat | DOI
 

2019 | Journal Article | LibreCat-ID: 22444
T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” konstruktionspraxis, vol. 6, pp. 24–26, 2019.
LibreCat
 

2019 | Conference Paper | LibreCat-ID: 22000
I. Gräßler and C. Oleff, “Risikoorientierte Analyse und Handhabung von Anforderungsänderungen,” in Design for X - Beiträge zum 30. DfX-Symposium , 2019, vol. 30, pp. 49–60.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22001
I. Gräßler, C. Oleff, and P. Scholle, “Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme,” in Fachtagung Mechatronik 2019 Paderborn, 2019, p. S. 1-6.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22002
I. Gräßler, H. Thiele, C. Oleff, P. Scholle, and V. Schulze, “Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme,” in International Conference on Engineering Design (ICED19), 2019, pp. 1265–1274.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22022
E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat | DOI
 

2019 | Journal Article | LibreCat-ID: 22047
E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, vol. 63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22028
E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi: 10.1063/1.5088314.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22027
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.
LibreCat | DOI
 

2019 | Book | LibreCat-ID: 22026
E. Moritzer, A. Hirsch, and S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung. Springer Vieweg, 2019, pp. 185–198.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat | Download (ext.)
 

2019 | Conference Paper | LibreCat-ID: 22441
S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,” in II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat | DOI
 

2019 | Conference Paper | LibreCat-ID: 22041
E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22183 | OA
D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat | Download (ext.)
 

2018 | Journal Article | LibreCat-ID: 22196
C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
 

2018 | Conference Paper | LibreCat-ID: 22433
J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22434
J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22435
T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
LibreCat | DOI
 

2018 | Journal Article | LibreCat-ID: 22436
A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 113, no. 11, pp. 742–745, 2018.
LibreCat | DOI
 

2018 | Book | LibreCat-ID: 22506
U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, Elektromechanische Antriebe. Carl Hanser Verlag, 2018, pp. 247–290.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21696
J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, and R. Koch, “Technology Integration into Existing Companies,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 14–31.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21991
I. Graessler, P. Scholle, J. Hentze, and C. Oleff, “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS,” in Proceedings of the DESIGN 2018 15th International Design Conference, 2018.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21998
I. Gräßler, P. Scholle, J. Hentze, and C. Oleff, “Semi-Automatized Assessment of Requirement Interrelations,” in 15th International Design Conference, 2018, vol. 15, p. S. 325-334.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 21999
I. Gräßler, C. Oleff, and P. Scholle, “Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte,” in Design for X - Beiträge zum 29. DfX-Symposium, 2018, vol. 29, pp. 333–344, doi: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22020
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat | DOI
 

2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
 

2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22043
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22046
F. Knoop and V. Schöppner, “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process,” in SPE ANTEC 2018, 2018, vol. 1, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22438
S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94, doi: https://doi.org/10.3139/9783446458123.005.
LibreCat | DOI
 

2018 | Conference Paper | LibreCat-ID: 22431
S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat | DOI
 

2017 | Book Chapter | LibreCat-ID: 23759
D. Menge, S. Josupeit, P. Delfs, and H.-J. Schmid, “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, H. A. Richard, B. Schramm, and T. Zipsner, Eds. Wiesbaden: Springer Vieweg, 2017, pp. 105–120.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22165
M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting,” Materials and Corrosion, vol. 68, no. 10, pp. 1028–1036, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22195
S. Josupeit and H.-J. Schmid, “Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories,” Journal of Applied Polymer Science, vol. 134, no. 42, 2017.
LibreCat | DOI
 

2017 | Book | LibreCat-ID: 22419
T. Künneke and D. Zimmer, Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22420
S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 80–93.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22421
T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21690
G. Deppe, R. Koch, and M. Kaesberg, “Rational Decision-Making for the Beneficial Application of Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2597–2611.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21691
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21692
A. Kruse, T. Reiher, and R. Koch, “Integrating AM into existing companies - selection of existing parts for increase of acceptance,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2575–2584.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21693
U. Jahnke, R. Koch, and A. T. Oppermann, “Design for protection: Systematic approach to prevent product piracy during product development using AM ,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2481–2492.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21694
J. Büsching and R. Koch, “Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2585–2596.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21695
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21697
G. Deppe and C. Lindemann, “Hybrid Manufacturing with Additive Manufacturing,” CECIMO Magazine, vol. 17, no. 11, pp. 28–29, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21704
T. Reiher, C. Lindemann, U. Jahnke, G. Deppe, and R. Koch, “Holistic approach for industrializing AM technology - from part selection to test and verification,” Progress in Additive Manufacturing, vol. 2, pp. 43–55, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22042
C. Schumacher, V. Schöppner, and J. Guntermann, “Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 470–484, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22045
F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22049
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, vol. 1, no. 1, pp. 108–114, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22038
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, vol. 8, no. 246, 2017, doi: 10.3390/mi8080246.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22033
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), pp. 563–568, 2017, doi: 10.1007/s11837-016-2197-2.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22023
F. Knoop, A. Kloke, and V. Schöppner, “Quality Improvement of FDM Parts by Parameter Optimization ,” in 32nd International Conference of the Polymer Processing Society, 2017, vol. 32, doi: 10.1063/1.5016790.
LibreCat | DOI
 

2016 | Dissertation | LibreCat-ID: 24774
A. Kloke, Untersuchung der Werkstoff-, Prozess- und Bauteileigenschaften beim Fused Deposition Modeling Verfahren, vol. 4. Düren: Shaker Verlag, 2016.
LibreCat | Download (ext.)
 

2016 | Dissertation | LibreCat-ID: 24897
S. Leuders, Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen, vol. 5. Düren: Düren Verlag GmbH, 2016.
LibreCat | Files available
 

2016 | Conference Paper | LibreCat-ID: 22180
S. Josupeit, P. Delfs, D. Menge, and H.-J. Schmid, “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2077–2086.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22185
P. Delfs, M. Tows, and H.-J. Schmid, “Optimized build orientation of additive manufactured parts for improved surface quality and build time,” Additive Manufacturing, vol. 2, no. 12, Part B, pp. 214–320, 2016.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22190
P. Delfs and H.-J. Schmid, “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts ,” in Fraunhofer Direct Digital Manufacturing Conference, 2016, vol. 3, pp. 411–414.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22194
S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for application in laser sintering,” in International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22200
S. Josupeit et al., “Dimensional accuracy of polymer laser sintered parts: Influences and measures,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22403
T. Künneke and D. Zimmer, “Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen,” in DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2016, pp. 151–160.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22404
S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22409
T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22410
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in ASPE Spring Topical Meeting, 2016, p. S.3-8.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22412
T. Lieneke, V. Denzer, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling,” in CAT 2016, 2016, vol. 43, pp. 286–291.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21687
G. Deppe and R. Koch, “Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 81–92.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21688
T. Reiher and R. Koch, “Product optimization with and for Additive Manufacturing,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2236–2249.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21689
C. Lindemann and R. Koch, “Cost Efficient Design and Planning for Additive Manufacturing Technologies,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 93–112.
LibreCat | DOI
 

2016 | Book | LibreCat-ID: 21698
C. Lindemann, G. Deppe, and R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat
 

2016 | Book | LibreCat-ID: 21699
U. Jahnke and R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 21702
T. Reiher, G. Deppe, and R. Koch, “Combining material efficiency and part reliability by product optimization applying additive manufacturing,” in International Conference Production Engineering and Management 2016, 2016, vol. 6, pp. 27–38.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21705
G. Deppe and R. Koch, “Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung,” in Rapid Tech 2016, 2016, vol. 13, pp. 349–360.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21997
I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, and T. Reiher, “Data Management for additive manufacturing: survey on requirements and current state,” in 14th International DESIGN Conference 2016, 2016, vol. 14.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22019
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi: 10.1007/s11837-016-2197-2.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22039
M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 121–133, doi: 10.3139/9783446450608.010.
LibreCat | DOI
 

2015 | Dissertation | LibreCat-ID: 24751
S. Rüsenberg, Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, vol. Band, 2. Düren: Shaker Verlag GmbH, 2015.
LibreCat | Download (ext.)
 

2015 | Conference Paper | LibreCat-ID: 22166
E. Klemp, “Industrial applications in AM - aerospace and overhaul,” in ASME AM3D Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22168
E. Klemp, “Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen,” in Generatives Fertigen und 3D-Drucken: Industrielle Revolution oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22169
E. Klemp, “Möglichkeiten, Chancen und Mythen additiver Fertigung,” in Hanse-Aerospace-Themennachmittag im Hause SLM, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22170
E. Klemp, “Additive Manufacturing - Potenziale, Zukunftschancen und Hürden,” in Messe Interzum, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22171
E. Klemp, “Technology Update 2015 for Metals,” in SLM-Usermeeting, 2015.
LibreCat
 

Filters and Search Terms

department=624

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed