Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4004 Publications
2022 | Journal Article | LibreCat-ID: 36814
Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition
D. Kaczmarek, T. Bierkandt, C. Rudolph, S. Grimm, S. Shaqiri, M. Höner, N. Gaiser, B. Atakan, M. Köhler, P. Hemberger, T. Kasper, Applications in Energy and Combustion Science (2022).
LibreCat
| DOI
D. Kaczmarek, T. Bierkandt, C. Rudolph, S. Grimm, S. Shaqiri, M. Höner, N. Gaiser, B. Atakan, M. Köhler, P. Hemberger, T. Kasper, Applications in Energy and Combustion Science (2022).
2022 | Journal Article | LibreCat-ID: 36811
Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure
D. Kaczmarek, C. Rudolph, B. Atakan, T. Kasper, Proceedings of the Combustion Institute (2022).
LibreCat
| DOI
D. Kaczmarek, C. Rudolph, B. Atakan, T. Kasper, Proceedings of the Combustion Institute (2022).
2022 | Journal Article | LibreCat-ID: 36813
A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame
T. Bierkandt, P. Hemberger, P. Oßwald, N. Gaiser, M. Hoener, D. Krüger, T. Kasper, M. Köhler, Proceedings of the Combustion Institute (2022).
LibreCat
| DOI
T. Bierkandt, P. Hemberger, P. Oßwald, N. Gaiser, M. Hoener, D. Krüger, T. Kasper, M. Köhler, Proceedings of the Combustion Institute (2022).
2022 | Journal Article | LibreCat-ID: 33002
Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.
LibreCat
| DOI
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.
2022 | Book Chapter | LibreCat-ID: 33003
Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 34572
Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 32103
Development of operational and demand-oriented firefighting equipment
H. Hanses, I. Horwath, Materials Today: Proceedings 62 (2022) 2684–2688.
LibreCat
| DOI
H. Hanses, I. Horwath, Materials Today: Proceedings 62 (2022) 2684–2688.
2022 | Journal Article | LibreCat-ID: 34459
Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature
L. Schmelzle, M. Striewe, J. Mergheim, G. Meschut, G. Possart, D. Teutenberg, D. Hein, P. Steinmann, Journal of Adhesion Science and Technology (2022).
LibreCat
| DOI
L. Schmelzle, M. Striewe, J. Mergheim, G. Meschut, G. Possart, D. Teutenberg, D. Hein, P. Steinmann, Journal of Adhesion Science and Technology (2022).
2022 | Conference Paper | LibreCat-ID: 20446
Robotergestütztes manuelles mechanisches Fügen – RoboterFügen
S. Neumann, G. Meschut, F. Schmatz, W. Flügge, in: n.d.
LibreCat
S. Neumann, G. Meschut, F. Schmatz, W. Flügge, in: n.d.
2022 | Conference Paper | LibreCat-ID: 36866
Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien
M. Ott, N. Meihöfener, R. Koch, in: Deutscher Verband für Materialforschung und -prüfung e.V. (Ed.), Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin, 2022, pp. 91–106.
LibreCat
| DOI
M. Ott, N. Meihöfener, R. Koch, in: Deutscher Verband für Materialforschung und -prüfung e.V. (Ed.), Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin, 2022, pp. 91–106.
2022 | Conference Abstract | LibreCat-ID: 37258
The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element
S. Haller, S.R. Tinkloh, T. Tröster, R. Brandt, in: 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
S. Haller, S.R. Tinkloh, T. Tröster, R. Brandt, in: 5th International Conference Hybrid 2022 Material & Structures, 2022.
2022 | Conference Paper | LibreCat-ID: 32819
Investigation on hot sheet metal forming by means of a longitudinal flux inductor
F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, G. Grundmeier, in: Proceedings of the 6th International Conference on Steels in Cars and Trucks, 2022.
LibreCat
F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, G. Grundmeier, in: Proceedings of the 6th International Conference on Steels in Cars and Trucks, 2022.
2022 | Dissertation | LibreCat-ID: 37635
Wave-Schnecken in der Einschneckenextrusion
M. Dörner, Wave-Schnecken in Der Einschneckenextrusion, 2022.
LibreCat
M. Dörner, Wave-Schnecken in Der Einschneckenextrusion, 2022.
2022 | Dissertation | LibreCat-ID: 37639
Untersuchungen zur werkstofflichen Aufbereitung von Post-Consumer-Kunststoffabfällen und Entwicklung eines neuen Aufbereitungsverfahrens
L.R. Helmlinger, Untersuchungen Zur Werkstofflichen Aufbereitung von Post-Consumer-Kunststoffabfällen Und Entwicklung Eines Neuen Aufbereitungsverfahrens, 2022.
LibreCat
L.R. Helmlinger, Untersuchungen Zur Werkstofflichen Aufbereitung von Post-Consumer-Kunststoffabfällen Und Entwicklung Eines Neuen Aufbereitungsverfahrens, 2022.
2022 | Dissertation | LibreCat-ID: 37638
Ein Beitrag zur InMould-Plasma Technologie zur Oberflächenvorbehandlung im Mehrkomponentenspritzgießwerkzeug
F.M. Mühlhoff, Ein Beitrag Zur InMould-Plasma Technologie Zur Oberflächenvorbehandlung Im Mehrkomponentenspritzgießwerkzeug, 2022.
LibreCat
F.M. Mühlhoff, Ein Beitrag Zur InMould-Plasma Technologie Zur Oberflächenvorbehandlung Im Mehrkomponentenspritzgießwerkzeug, 2022.
2022 | Dissertation | LibreCat-ID: 37637
Ein Beitrag zum Warmgasstumpfschweißen von Kunststoffen
M.O. Bialaschik, Ein Beitrag Zum Warmgasstumpfschweißen von Kunststoffen, 2022.
LibreCat
M.O. Bialaschik, Ein Beitrag Zum Warmgasstumpfschweißen von Kunststoffen, 2022.
2022 | Dissertation | LibreCat-ID: 37636
Modellierung der Carbonfaserlängenverkürzung
H. Malatyali, Modellierung Der Carbonfaserlängenverkürzung, 2022.
LibreCat
H. Malatyali, Modellierung Der Carbonfaserlängenverkürzung, 2022.
2022 | Book Chapter | LibreCat-ID: 23405
Szenario-Technik
I. Gräßler, P. Scholle, H. Thiele, in: S. Vajna (Ed.), Integrated Design Engineering. Ein interdisziplinäres Modell für die ganzheitliche Produktentwicklung, Kapitel: 20, Springer-Verlag, Berlin Heidelberg, 2022, pp. 544–566.
LibreCat
| Download (ext.)
I. Gräßler, P. Scholle, H. Thiele, in: S. Vajna (Ed.), Integrated Design Engineering. Ein interdisziplinäres Modell für die ganzheitliche Produktentwicklung, Kapitel: 20, Springer-Verlag, Berlin Heidelberg, 2022, pp. 544–566.
2022 | Journal Article | LibreCat-ID: 32174 |
Responsibility Assignment in Systems Engineering
I. Gräßler, H. Thiele, B. Grewe, M. Hieb, Proceedings of the Design Society 2 (2022) 1875–1884.
LibreCat
| Files available
| DOI
| Download (ext.)
I. Gräßler, H. Thiele, B. Grewe, M. Hieb, Proceedings of the Design Society 2 (2022) 1875–1884.
2022 | Journal Article | LibreCat-ID: 31185
Multiscale analysis of composite structures with goal-oriented mesh adaptivity and reduced order homogenization
X. Ju, R. Mahnken, Y. Xu, L. Liang, C. Cheng, W. Zhou, Composite Structures (2022).
LibreCat
| DOI
X. Ju, R. Mahnken, Y. Xu, L. Liang, C. Cheng, W. Zhou, Composite Structures (2022).
2022 | Conference Paper | LibreCat-ID: 33035
Effect of diffusivity and chemical reactions on the determination of mass transfer coefficients in columns with structured packing
L.A. Mapura, E.Y. Kenig, in: Annual Meeting on Reaction Engineering and ProcessNet Subject Division “Heat and Mass Transfer,” 2022.
LibreCat
L.A. Mapura, E.Y. Kenig, in: Annual Meeting on Reaction Engineering and ProcessNet Subject Division “Heat and Mass Transfer,” 2022.
2022 | Conference Paper | LibreCat-ID: 33254
Experimental study on the condensation of pure substances in outer pillow-plate channels
F. Buckmann, E. Kenig, in: Annual Meeting on Reaction Engineering and ProcessNet Subject Division “Heat and Mass Transfer,” 2022.
LibreCat
F. Buckmann, E. Kenig, in: Annual Meeting on Reaction Engineering and ProcessNet Subject Division “Heat and Mass Transfer,” 2022.
2022 | Journal Article | LibreCat-ID: 30656
Strain mode-dependent weighting functions in hyperelasticity accounting for verification, validation, and stability of material parameters
R. Mahnken, Archive of Applied Mechanics 92 (2022) 713–754.
LibreCat
| DOI
R. Mahnken, Archive of Applied Mechanics 92 (2022) 713–754.
2022 | Journal Article | LibreCat-ID: 30655
Goal-oriented error estimation and h-adaptive finite elements for hyperelastic micromorphic continua
X. Ju, R. Mahnken, Y. Xu, L. Liang, Computational Mechanics 69 (2022) 847–863.
LibreCat
| DOI
X. Ju, R. Mahnken, Y. Xu, L. Liang, Computational Mechanics 69 (2022) 847–863.
2022 | Journal Article | LibreCat-ID: 30657
Physics informed neural networks for continuum micromechanics
A. Henkes, H. Wessels, R. Mahnken, Computer Methods in Applied Mechanics and Engineering 393 (2022).
LibreCat
| DOI
A. Henkes, H. Wessels, R. Mahnken, Computer Methods in Applied Mechanics and Engineering 393 (2022).
2022 | Conference Abstract | LibreCat-ID: 40647
Liquid flow morphology investigation in structured packings for offshore applications using a novel flow imaging sensor
T. Mamedov, E. Schleicher, M. Schubert, T. Ehlert, E.Y. Kenig, in: 2022.
LibreCat
T. Mamedov, E. Schleicher, M. Schubert, T. Ehlert, E.Y. Kenig, in: 2022.
2022 | Dissertation | LibreCat-ID: 40518
Automatisierte dezentrale Produktionssteuerung für cyber-physische Produktionssysteme mit digitaler Repräsentation der Beschäftigten
A. Pöhler, Automatisierte Dezentrale Produktionssteuerung Für Cyber-Physische Produktionssysteme Mit Digitaler Repräsentation Der Beschäftigten, LibreCat University, 2022.
LibreCat
| Files available
| DOI
A. Pöhler, Automatisierte Dezentrale Produktionssteuerung Für Cyber-Physische Produktionssysteme Mit Digitaler Repräsentation Der Beschäftigten, LibreCat University, 2022.
2022 | Conference Paper | LibreCat-ID: 35271
Fracture mechanical investigation of preformed metal sheets using a novel CC-specimen
D. Weiß, B. Schramm, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 879–885.
LibreCat
| DOI
D. Weiß, B. Schramm, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 879–885.
2022 | Journal Article | LibreCat-ID: 41906
Stiffness optimization and reliable design of a hip implant by using the potential of additive manufacturing processes
L. Risse, S.C. Woodcock, J.-P. Brüggemann, G. Kullmer, H.A. Richard, BioMedical Engineering OnLine 21 (2022).
LibreCat
| DOI
L. Risse, S.C. Woodcock, J.-P. Brüggemann, G. Kullmer, H.A. Richard, BioMedical Engineering OnLine 21 (2022).
2022 | Conference Paper | LibreCat-ID: 29853
Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze
K. Tews, T. Aubel, D. Teutenberg, G. Meschut, T. Duffe, G. Kullmer, in: 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
K. Tews, T. Aubel, D. Teutenberg, G. Meschut, T. Duffe, G. Kullmer, in: 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
2022 | Conference Abstract | LibreCat-ID: 41907
Bewertung der Knochen-Schraube Verbindung im Auszugtest und unter physiologischer Belastung in der Finite Elemente Methode
S.C. Woodcock, B. Schramm, G. Kullmer, H.A. Richard, in: Deutscher Verband für Materialforschung und -prüfung e.V., 2022.
LibreCat
S.C. Woodcock, B. Schramm, G. Kullmer, H.A. Richard, in: Deutscher Verband für Materialforschung und -prüfung e.V., 2022.
2022 | Journal Article | LibreCat-ID: 32392
Global energy release rate of small penny-shaped cracks in hyperelastic materials under general stress conditions
T. Duffe, G. Kullmer, K. Tews, T. Aubel, G. Meschut, Theoretical and Applied Fracture Mechanics (2022).
LibreCat
| DOI
T. Duffe, G. Kullmer, K. Tews, T. Aubel, G. Meschut, Theoretical and Applied Fracture Mechanics (2022).
2022 | Conference Abstract | LibreCat-ID: 33088
Fracture mechanical concept to predict crack nucleation in elastic adhesive joints
T. Duffe, K. Tews, G. Kullmer, G. Meschut, in: ECF23, European Conference on Fracture 2022, 2022.
LibreCat
T. Duffe, K. Tews, G. Kullmer, G. Meschut, in: ECF23, European Conference on Fracture 2022, 2022.
2022 | Journal Article | LibreCat-ID: 33495
Numerische Lebensdauerprognose von hyperelastischen Klebverbindungen mit einem bruchmechanischen Ansatz
T. Duffe, K. Tews, T. Aubel, G. Meschut, G. Kullmer, Fachzeitschrift für Schweißen und verwandte Verfahren 74 (2022) 570–576.
LibreCat
T. Duffe, K. Tews, T. Aubel, G. Meschut, G. Kullmer, Fachzeitschrift für Schweißen und verwandte Verfahren 74 (2022) 570–576.
2022 | Dissertation | LibreCat-ID: 32816
Ein Beitrag zur Etablierung von Holzwerkstoffen im strukturellen Automobilbau anhand der Vorentwicklung zweier Karosseriebauteile aus Rotbuche
S. Schweizer, Ein Beitrag zur Etablierung von Holzwerkstoffen im strukturellen Automobilbau anhand der Vorentwicklung zweier Karosseriebauteile aus Rotbuche, LibreCat University, 2022.
LibreCat
| DOI
S. Schweizer, Ein Beitrag zur Etablierung von Holzwerkstoffen im strukturellen Automobilbau anhand der Vorentwicklung zweier Karosseriebauteile aus Rotbuche, LibreCat University, 2022.
2022 | Dissertation | LibreCat-ID: 31848
Haftung und Korrosionsbeständigkeit direktgefügter Hybridsysteme aus kohlenstofffaserverstärktem Epoxidharz und verzinktem Stahl für den Automobilleichtbau
J.A. Striewe, Haftung und Korrosionsbeständigkeit direktgefügter Hybridsysteme aus kohlenstofffaserverstärktem Epoxidharz und verzinktem Stahl für den Automobilleichtbau, 2022.
LibreCat
J.A. Striewe, Haftung und Korrosionsbeständigkeit direktgefügter Hybridsysteme aus kohlenstofffaserverstärktem Epoxidharz und verzinktem Stahl für den Automobilleichtbau, 2022.
2022 | Journal Article | LibreCat-ID: 32492
Aluminum Diethylphosphinate as a Flame Retardant for Polyethylene: Investigation of the Pyrolysis and Combustion Behavior of PE/AlPi-Mixtures
S. Lau, M. Gonchikzhapov, A. Paletsky, A. Shmakov, O. Korobeinichev, T. Kasper, B. Atakan, Combustion and Flame 240 (2022).
LibreCat
| DOI
S. Lau, M. Gonchikzhapov, A. Paletsky, A. Shmakov, O. Korobeinichev, T. Kasper, B. Atakan, Combustion and Flame 240 (2022).
2022 | Dissertation | LibreCat-ID: 42127
Über die thermischen und thermisch-oxidativen Einflüsse auf Lasersinter-Werkstoffe
C. Kummert, Über die thermischen und thermisch-oxidativen Einflüsse auf Lasersinter-Werkstoffe, Shaker Verlag, Düren, 2022.
LibreCat
C. Kummert, Über die thermischen und thermisch-oxidativen Einflüsse auf Lasersinter-Werkstoffe, Shaker Verlag, Düren, 2022.
2022 | Dissertation | LibreCat-ID: 42637
Multidomänenbasierte Optimierung des axialdynamischen Schaltverhaltens von Federkraftbremsen
L.M. Blumenthal, Multidomänenbasierte Optimierung des axialdynamischen Schaltverhaltens von Federkraftbremsen, Shaker Verlag, Düren, 2022.
LibreCat
L.M. Blumenthal, Multidomänenbasierte Optimierung des axialdynamischen Schaltverhaltens von Federkraftbremsen, Shaker Verlag, Düren, 2022.
2022 | Conference Paper | LibreCat-ID: 30153
Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur
T. Schmolke, D. Teutenberg, G. Meschut, D. Meinderink, S. Golebiowska, F. Rieker, C. Ebbert, G. Grundmeier, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), 2022.
LibreCat
T. Schmolke, D. Teutenberg, G. Meschut, D. Meinderink, S. Golebiowska, F. Rieker, C. Ebbert, G. Grundmeier, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), 2022.
2022 | Dissertation | LibreCat-ID: 42762
Umformtechnisches Fügen von Stanzmuttern während des Formhärtens von 22MnB5
S. Meyer, Umformtechnisches Fügen von Stanzmuttern während des Formhärtens von 22MnB5, 2022.
LibreCat
S. Meyer, Umformtechnisches Fügen von Stanzmuttern während des Formhärtens von 22MnB5, 2022.
2022 | Conference Abstract | LibreCat-ID: 37424
A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat
| Files available
J. Beimdiek, H.-J. Schmid, in: 2022.
2022 | Journal Article | LibreCat-ID: 35729
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
LibreCat
| Download (ext.)
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
2022 | Journal Article | LibreCat-ID: 35724
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
LibreCat
| Download (ext.)
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
2022 | Conference Paper | LibreCat-ID: 37436
Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation)
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
LibreCat
| Files available
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
2022 | Conference Abstract | LibreCat-ID: 37426
A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster)
J. Beimdiek, H.-J. Schmid, in: IAC 2022 Book of Abstacts, 2022.
LibreCat
| Files available
J. Beimdiek, H.-J. Schmid, in: IAC 2022 Book of Abstacts, 2022.
2022 | Conference Abstract | LibreCat-ID: 37432
Novel entrained flow SCR using online synthesized catalyst particles (Poster)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat
| Files available
J. Beimdiek, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 37430
Novel entrained flow SCR using online synthesized catalyst particles in flue gas cleaning systems (Presentation)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat
J. Beimdiek, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 31183
Untersuchung von kleinskaligen Flüssigkeitselementen auf mikrostrukturierten Packungsoberflächen
C. Dechert, E. Kenig, in: 2022.
LibreCat
C. Dechert, E. Kenig, in: 2022.
2022 | Journal Article | LibreCat-ID: 43158
Geometric and mechanical joint characterization of conventionally and tumbled self-piercing riveting joints
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
S. Wituschek, F. Kappe, G. Meschut, M. Lechner, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 33724
Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants
P. Vieth, T. Borgert, W. Homberg, G. Grundmeier, Advanced Engineering Materials (2022).
LibreCat
| DOI
P. Vieth, T. Borgert, W. Homberg, G. Grundmeier, Advanced Engineering Materials (2022).
2022 | Book | LibreCat-ID: 44199
Analyse des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung
N. Chudalla, G. Meschut, D. Teutenberg, M. Wibbeke, A. Bartley, Analyse des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung, P 1396, Forschungsvereinigung Stahlanwendung e. V., Düsseldorf, 2022.
LibreCat
N. Chudalla, G. Meschut, D. Teutenberg, M. Wibbeke, A. Bartley, Analyse des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung, P 1396, Forschungsvereinigung Stahlanwendung e. V., Düsseldorf, 2022.
2022 | Conference Paper | LibreCat-ID: 34096
Information Model for Hybrid Prototyping in Design Reviews of Assembly Stations
I. Gräßler, D. Roesmann, S. Hillebrand, J. Pottebaum, in: Procedia CIRP ICME, Elsevier BV, 2022, pp. 489–494.
LibreCat
| DOI
| Download (ext.)
I. Gräßler, D. Roesmann, S. Hillebrand, J. Pottebaum, in: Procedia CIRP ICME, Elsevier BV, 2022, pp. 489–494.
2022 | Book | LibreCat-ID: 44209
Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur
T. Schmolke, G. Meschut, P. Vieth, D. Meinderink, G. Grundmeier, Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur , P1399 ed., Forschungsvereinigung Stahlanwendung e. V., Düsseldorf, 2022.
LibreCat
T. Schmolke, G. Meschut, P. Vieth, D. Meinderink, G. Grundmeier, Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur , P1399 ed., Forschungsvereinigung Stahlanwendung e. V., Düsseldorf, 2022.
2022 | Book | LibreCat-ID: 44213
Experimentelle und numerische Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung
J. Göddecke, G. Meschut, F. Kötz, A. Matzenmiller, J. Damm, M. Albiez, T. Ummenhofer, Experimentelle und numerische Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung, Forschungsvereinigung Stahlanwendung e.V., Düsseldorf, 2022.
LibreCat
J. Göddecke, G. Meschut, F. Kötz, A. Matzenmiller, J. Damm, M. Albiez, T. Ummenhofer, Experimentelle und numerische Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung, Forschungsvereinigung Stahlanwendung e.V., Düsseldorf, 2022.
2022 | Journal Article | LibreCat-ID: 34228 |
A Thermal Model for Recuperative Heat Engines Operating with Dense Working Fluids
N. Mügge, A. Kronberg, M. Glushenkov, V. Inguva, E.Y. Kenig, Chemical Engineering Transactions 96 (2022) 175–180.
LibreCat
| DOI
| Download (ext.)
N. Mügge, A. Kronberg, M. Glushenkov, V. Inguva, E.Y. Kenig, Chemical Engineering Transactions 96 (2022) 175–180.
2022 | Conference Abstract | LibreCat-ID: 33485
CFD-Based Investigation of the Packing Microstructure Influence on Droplet Behavior and Film Flow
C. Dechert, E. Kenig, in: Proceedings of the 12th International Conference Distillation & Absorption 2022, 2022.
LibreCat
C. Dechert, E. Kenig, in: Proceedings of the 12th International Conference Distillation & Absorption 2022, 2022.
2022 | Conference Paper | LibreCat-ID: 31223
On Heat Regeneration Limitations in Heat Engines With Dense Working Fluids
N. Mügge, A. Kronberg, M. Glushenkov, E. Kenig, in: Heat Powered Cycles Conference 2022, 2022.
LibreCat
N. Mügge, A. Kronberg, M. Glushenkov, E. Kenig, in: Heat Powered Cycles Conference 2022, 2022.
2022 | Journal Article | LibreCat-ID: 34216
Review on mechanical joining by plastic deformation
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
2022 | Journal Article | LibreCat-ID: 43433 |
Evaluation eines digitalen Fachspezifischen Chinesischsprachkurses für Studierende des Ingenieurwesens
D. Hambach, die hochschullehre. Interdisziplinäre Zeitschrift für Hochschule und Lehre (2022) 1–15.
LibreCat
| DOI
| Download (ext.)
D. Hambach, die hochschullehre. Interdisziplinäre Zeitschrift für Hochschule und Lehre (2022) 1–15.
2022 | Journal Article | LibreCat-ID: 29891
Extrahierung von Anforderungen aus natürlich-sprachlichen Lastenheften: Was erschwert eine KI-basierte Extrahierung?
I. Gräßler, D. Preuß, J. Pottebaum, Softwaretechnik-Trends 42 (2022) 15–16.
LibreCat
| Files available
I. Gräßler, D. Preuß, J. Pottebaum, Softwaretechnik-Trends 42 (2022) 15–16.
2022 | Journal Article | LibreCat-ID: 29719
Energy saving potentials of an efficient recycling process of different aluminum rejects
T. Borgert, W. Homberg, Energy Reports 8 (2022) 399–404.
LibreCat
| DOI
T. Borgert, W. Homberg, Energy Reports 8 (2022) 399–404.
2022 | Conference Paper | LibreCat-ID: 30292
Hot Spinning of Cutting Blades for Food Industry
D. Engemann, W. Homberg, in: Braga - Portugal, n.d.
LibreCat
| Files available
D. Engemann, W. Homberg, in: Braga - Portugal, n.d.
2022 | Journal Article | LibreCat-ID: 31360
Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC)
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).
LibreCat
| DOI
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).
2022 | Journal Article | LibreCat-ID: 37647
Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints
C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478.
LibreCat
| DOI
C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478.
2022 | Journal Article | LibreCat-ID: 30885
Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology
T. Heggemann, V. Psyk, A. Oesterwinter, M. Linnemann, V. Kräusel, W. Homberg, Metals 12 (2022).
LibreCat
| DOI
T. Heggemann, V. Psyk, A. Oesterwinter, M. Linnemann, V. Kräusel, W. Homberg, Metals 12 (2022).
2022 | Journal Article | LibreCat-ID: 31791
Automated Requirement Dependency Analysis for Complex Technical Systems
I. Gräßler, C. Oleff, M. Hieb, D. Preuß, Proceedings of the Design Society 2 (2022) 1865–1874.
LibreCat
| DOI
I. Gräßler, C. Oleff, M. Hieb, D. Preuß, Proceedings of the Design Society 2 (2022) 1865–1874.
2022 | Conference Paper | LibreCat-ID: 32147
Mensch-Tracking zur Identifizierung des Voranschreitens von Roboterunterstützten Rettungseinsätzen der Feuerwehr
I. Gräßler, D. Roesmann, J. Pottebaum, B. Corves, N. Mandischer, M. Gürtler, in: Tagungsband der VDI Mechatronik 2022, 2022, pp. 151–156.
LibreCat
| Files available
| DOI
I. Gräßler, D. Roesmann, J. Pottebaum, B. Corves, N. Mandischer, M. Gürtler, in: Tagungsband der VDI Mechatronik 2022, 2022, pp. 151–156.
2022 | Conference Paper | LibreCat-ID: 33889
Extended RFLP for complex technical systems
I. Gräßler, D. Wiechel, C. Oleff, in: Wien, 2022.
LibreCat
I. Gräßler, D. Wiechel, C. Oleff, in: Wien, 2022.
2022 | Journal Article | LibreCat-ID: 34224
Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations
T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022).
LibreCat
| DOI
T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022).
2022 | Conference Paper | LibreCat-ID: 30726
Influence of plane mixed-mode loading on the kinking angle of clinchable metal sheets
D. Weiß, B. Schramm, G. Kullmer, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 139–147.
LibreCat
| DOI
D. Weiß, B. Schramm, G. Kullmer, in: Procedia Structural Integrity, Elsevier BV, 2022, pp. 139–147.
2022 | Journal Article | LibreCat-ID: 34070
A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase
B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger, Journal of Advanced Joining Processes (2022).
LibreCat
| DOI
B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger, Journal of Advanced Joining Processes (2022).
2022 | Journal Article | LibreCat-ID: 34246
Development of a method for the separate measurement of the growth of internal crack tips by means of the potential drop method
G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics (2022).
LibreCat
| DOI
G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics (2022).
2022 | Journal Article | LibreCat-ID: 34074
A statistically based strain energy function for polymer chains in rubber elasticity
R. Mahnken, J. Mirzapour, Archive of Applied Mechanics 92 (2022) 3295–3323.
LibreCat
| DOI
R. Mahnken, J. Mirzapour, Archive of Applied Mechanics 92 (2022) 3295–3323.
2022 | Journal Article | LibreCat-ID: 41485
Effects on Process Forces of Individual Milling Tool Edges Depending on the Cutting Angle and Cutting Speed When Milling Cfrp
R. Clemens, E. Barth, E. Uhlmann, Y. Zhan, I. Caylak, R. Mahnken, SSRN Electronic Journal (2022).
LibreCat
| DOI
R. Clemens, E. Barth, E. Uhlmann, Y. Zhan, I. Caylak, R. Mahnken, SSRN Electronic Journal (2022).
2022 | Dissertation | LibreCat-ID: 42813
Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften
E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften, 2022.
LibreCat
E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften, 2022.
2022 | Conference Paper | LibreCat-ID: 42874
Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau
J. Göddecke, G. Meschut, T. Göhrs, M. Große Gehling, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), Frankfurt, 2022.
LibreCat
J. Göddecke, G. Meschut, T. Göhrs, M. Große Gehling, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), Frankfurt, 2022.
2022 | Conference Paper | LibreCat-ID: 42875
Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung
J. Göddecke, G. Meschut, in: Deutscher Verband für Schweißen und verwandte Verfahren e.V. (DVS) (Ed.), 2022.
LibreCat
J. Göddecke, G. Meschut, in: Deutscher Verband für Schweißen und verwandte Verfahren e.V. (DVS) (Ed.), 2022.
2022 | Conference Abstract | LibreCat-ID: 41160
Triggering instabilities of polymer solution suspensions under uniaxial extension (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat
| Files available
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 41158
Instability analysis of suspensions with a polymer solution matrix (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat
| Files available
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 33695
Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.
LibreCat
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.
2022 | Journal Article | LibreCat-ID: 43156
Mechanical joining in versatile process chains
G. Meschut, M. Merklein, A. Brosius, M. Bobbert, Production Engineering 16 (2022) 187–191.
LibreCat
| DOI
G. Meschut, M. Merklein, A. Brosius, M. Bobbert, Production Engineering 16 (2022) 187–191.
2022 | Journal Article | LibreCat-ID: 43155
Untersuchung von Klebverbindungen für Batteriegehäuse
T. Schmolke, G. Meschut, D. Meinderink, F. Rieker, G. Grundmeier, adhäsion KLEBEN & DICHTEN 66 (2022) 40–43.
LibreCat
| DOI
T. Schmolke, G. Meschut, D. Meinderink, F. Rieker, G. Grundmeier, adhäsion KLEBEN & DICHTEN 66 (2022) 40–43.
2022 | Journal Article | LibreCat-ID: 43157
Influence of the incident angle on the OCT measurement during remote laser beam welding
M. Werner, J. Wagner, F. Ribbeck, S. Hensel, K. Goth, T. Graf, G. Meschut, Procedia CIRP 111 (2022) 513–517.
LibreCat
| DOI
M. Werner, J. Wagner, F. Ribbeck, S. Hensel, K. Goth, T. Graf, G. Meschut, Procedia CIRP 111 (2022) 513–517.
2022 | Conference Paper | LibreCat-ID: 36871 |
Boosting artificial intelligence in design processes by the use of additive manufacturing
M. Ott, N. Meihöfener, R. Koch, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium 2022, Austin, Texas, 2022, pp. 696–705.
LibreCat
| Files available
| Download (ext.)
M. Ott, N. Meihöfener, R. Koch, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium 2022, Austin, Texas, 2022, pp. 696–705.
2022 | Conference Abstract | LibreCat-ID: 43238
A novel correction method for the shear rate in a couette rheometer (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat
| Files available
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 43243
Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster)
T. Rüther, H.-J. Schmid, in: 2022.
LibreCat
| Files available
T. Rüther, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 43240
NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat
| Files available
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
2022 | Conference Paper | LibreCat-ID: 31186
Modellierung des Stofftransportes in einer geneigten Kolonne mit dem Ansatz der hydrodynamischen Analogien
T. Ehlert, T. Mamedov, M. Schubert, E.Y. Kenig, in: 2022.
LibreCat
T. Ehlert, T. Mamedov, M. Schubert, E.Y. Kenig, in: 2022.
2022 | Book Chapter | LibreCat-ID: 29727
Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction
M.C. Wohlleben, A. Bender, S. Peitz, W. Sextro, in: Machine Learning, Optimization, and Data Science, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
| Download (ext.)
M.C. Wohlleben, A. Bender, S. Peitz, W. Sextro, in: Machine Learning, Optimization, and Data Science, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 33856 |
Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics
E. Moritzer, F. Flachmann, M. Richters, M. Neugebauer, Journal of Composites Science 6 (2022).
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Flachmann, M. Richters, M. Neugebauer, Journal of Composites Science 6 (2022).
2022 | Journal Article | LibreCat-ID: 33477 |
Dynamic modeling of absorption/desorption closed-loop including periphery
M. Bothe, I. Hami Dindar, N. Lutters, E.Y. Kenig, Computers and Chemical Engineering (2022).
LibreCat
| Files available
M. Bothe, I. Hami Dindar, N. Lutters, E.Y. Kenig, Computers and Chemical Engineering (2022).
2022 | Journal Article | LibreCat-ID: 34241
Joining of multi-material structures using a versatile self-piercing riveting process
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 30100
Provision of cross-domain knowledge in mechanical joining using ontologies
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
LibreCat
| DOI
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 30884
Investigation of the friction conditions of self-pierce rivets by means of a compression-torsion tribometer
M.S. Rossel, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
M.S. Rossel, G. Meschut, Production Engineering (2022).
2022 | Book Chapter | LibreCat-ID: 34275
Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 34244
Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods
F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, G. Meschut, Journal of Manufacturing Processes 84 (2022) 1438–1448.
LibreCat
| DOI
F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, G. Meschut, Journal of Manufacturing Processes 84 (2022) 1438–1448.
2022 | Journal Article | LibreCat-ID: 29858
Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
LibreCat
| DOI
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 29857
Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
2022 | Conference Paper | LibreCat-ID: 33892
Literature study on the potential of Artificial Intelligence in Scenario-Technique
I. Gräßler, A.M. Tusek, H. Thiele, D. Preuß, B. Grewe, M. Hieb, in: XXXIII ISPIM Innovation Conference Proceedings, LUT Scientific and Expertise Publications, Copenhagen, Denmark, 2022.
LibreCat
I. Gräßler, A.M. Tusek, H. Thiele, D. Preuß, B. Grewe, M. Hieb, in: XXXIII ISPIM Innovation Conference Proceedings, LUT Scientific and Expertise Publications, Copenhagen, Denmark, 2022.