76 Publications
2024 | Conference Paper | LibreCat-ID: 53638
Dahms, Frederik Simon, and Werner Homberg. “Modular 3D Roller Straightening – A New Approach to Straightening and Forming of Spring Steel Wires (X10CrNi18-8).” In Materials Research Proceedings. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-154.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 54650
Borgert, Thomas, Ansgar Bernhard Nordieker, and Werner Homberg. “Form-Based Manufacturing of Aluminium and Steel Auxiliary Joining Elements as the Basis for an Efficient Joining Operation.” In Materials Research Proceedings. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-180.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 54649
Borgert, Thomas, Ansgar Bernhard Nordieker, Eugen Wiens, and Werner Homberg. “Investigations to Improve the Tool Life during Thermomechanical and Incremental Forming of Steel Auxiliary Joining Elements.” Journal of Advanced Joining Processes 9 (2024). https://doi.org/10.1016/j.jajp.2024.100185.
LibreCat
| DOI
2024 | Book Chapter | LibreCat-ID: 57190
Rozo Vasquez, Julian , Lukas Kersting, Bahman Arian, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Soft Sensor Model of Phase Transformation During Flow Forming of Metastable Austenitic Steel AISI 304L.” In Lecture Notes in Mechanical Engineering. Cham: Springer International Publishing, 2024. https://doi.org/10.1007/978-3-031-58006-2_10.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 57189
Rozo Vasquez, Julian , Hanigah Kanagarajah, Bahman Arian, Lukas Kersting, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Barkhausen Noise- and Eddy Current-Based Measurements for Online Detection of Deformation-Induced Martensite during Flow Forming of Metastable Austenitic Steel AISI 304L.” Authorea, Inc., 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 57173
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “α’-Martensite Grading Techniques in Reverse Flow Forming of AISI 304L.” In Materials Research Proceedings, Vol. 44. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903254-76.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 57178
Kersting, Lukas, Sebastian Sander, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Improving the Flow Forming Process by a Novel Closed-Loop Control.” In Materials Research Proceedings, Vol. 41. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-158.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 57183
Peters, Henning, Eugen Djakow, Tim Rostek, Andreas Mazur, Ansgar Trächtler, Werner Homberg, and Barbara Hammer. “Novel Approach for Data-Driven Modelling of Multi-Stage Straightening and Bending Processes.” In Materials Research Proceedings, Vol. 41. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-252.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 57171
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Thermomechanical Reverse Flow Forming of AISI 304L.” In Materials Research Proceedings, Vol. 41. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-151.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44316
Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Softsensor Model of Phase Transformation during Flow Forming of Metastable Austenitic Steel AISI 304L,” 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48001
Bathelt, Lukas, Eugen Djakow, Frederik Dahms, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Neuartiger Ansatz Zum Richten von Zwei- Und Dreidimensionalen Fehlern an Einem Federdraht.” In Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion, Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen. Ilmenau, Germany: ISLE Steuerungstechnik und Leistungselektronik, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44314 | 
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Cryogenic Reverse Flow Forming of AISI 304L.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-219.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 48075 |
Homberg, Werner, Bahman Arian, Viktor Arne, Thomas Borgert, Alexander Brosius, Peter Groche, Christoph Hartmann, et al. “Softsensors: Key Component of Property Control in Forming Technology.” Production Engineering, 2023. https://doi.org/10.1007/s11740-023-01227-1.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 43031
Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44036
Borgert, Thomas, and Werner Homberg. “Analysis of Temperature Effect on Strength and Microstructure in Friction Induced Recycling Process (FIRP).” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-211.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44035
Dahms, Frederik, and Werner Homberg. “Energy and Resource-Efficient Forming of Gas Cylinders by Friction-Spinning.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-208.
LibreCat
| Files available
| DOI
2023 | Conference Paper | LibreCat-ID: 43044
Holzmüller, Maik, Maik Linnemann, Werner Homberg, Verena Psyk, Verena Kräusel, and Janika Kroos. “Proof of Concept for Incremental Sheet Metal Forming by Means of Electromagnetic and Electrohydraulic High-Speed Forming.” In Materials Research Proceedings, 25:11–18. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-2.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43045
Knyazyev, Mykhaylo, Maik Holzmüller, and Werner Homberg. “Investigation of Pressure Fields Generated by Two Simultaneous Discharges in Liquid Initiated by Wires.” Journal of Manufacturing and Materials Processing 7, no. 1 (2023). https://doi.org/10.3390/jmmp7010040.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 46691
Dahms, Frederik, and Werner Homberg. “Analysis and Modelling of the Deformation in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming Process.” In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41023-9_72.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 46483
Borgert, Thomas, Maximilian Henke, and Werner Homberg. “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040147.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 46752
Borgert, Thomas, and Werner Homberg. “Friction-Induced Recycled Aluminium Semi-Finished Products in Thermo-Mechanical Joining Technology.” In Lecture Notes in Mechanical Engineering. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_1.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 28941
Afsahnoudeh, Reza, Maik Holzmüller, Fabian Bader, Werner Homberg, and Eugeny Y. Kenig. “Numerische Untersuchung von Oberflächenstrukturierung Zur Erhöhung Der Effizienz von Kissenplatten-Wärmeübertragern,” 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44312
Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Bauteilfertigung.” At - Automatisierungstechnik 71, no. 1 (2023): 68–81. https://doi.org/10.1515/auto-2022-0106.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44315
Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Control Strategy for Angular Gradations by Means of the Flow Forming Process.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-220.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44318
Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Detection of Phase Transformation during Plastic Deformation of Metastable Austenitic Steel AISI 304L by Means of X-Ray Diffraction Pattern Analysis.” Metals, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 56626
Holzmüller, Maik, Yi Gong, Fabian Bader, Armin Henke, and Werner Homberg. “Numerical Approach to Model a Novel Electrohydraulic Incremental Forming Process for the Manufacture of Pillow Plate Heat Exchangers.” In Lecture Notes in Mechanical Engineering. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41023-9_69.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 56627
Afsahnoudeh, Reza, Andreas Wortmeier, Maik Holzmüller, Yi Gong, Werner Homberg, and Eugeny Kenig. “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis.” Energies 16, no. 21 (2023). https://doi.org/10.3390/en16217284.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34001 |
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, and Julian Rozo Vasquez. “Produktkennzeichnung Durch Lokal Definierte Einstellung von Ferromagnetischen Eigenschaften Beim Drückwalzen von Metastabilen Stahlwerkstoffen.” In 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, 333–47. Aachen, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34003 |
Arian, Bahman, Annika Oesterwinter, Werner Homberg, Julian Rozo Vasquez, Frank Walther, Lukas Kersting, and Ansgar Trächtler. “A Flow Forming Process Model to Predict Workpiece Properties in AISI 304L.” In 19th Int. Conference on Metal Forming 2022, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34216
Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32412
Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.” Key Engineering Materials 926 (2022): 683–89. https://doi.org/10.4028/p-3rk19y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29357
Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.” Metals 12, no. 1 (2022). https://doi.org/10.3390/met12010158.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34000
Rozo Vasquez, Julian, Hanigah Kanagarajah, Bahman Arian, Lukas Kersting, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.” Practical Metallography 59, no. 11 (2022): 660–75. https://doi.org/10.1515/pm-2022-0064.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33999
Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.” Key Engineering Materials 926 (2022): 862–74. https://doi.org/10.4028/p-yp2hj3.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36563
Rozo Vasquez, Julian, Frank Walther, Bahman Arian, Werner Homberg, Lukas Kersting, and Ansgar Trächtler. “Soft Sensor Concept for Micromagnetic Depth-Specific Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” In Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.
LibreCat
2022 | Book | LibreCat-ID: 36412
Kersting, Lukas, Ansgar Trächtler, Bahman Arian, Werner Homberg, Julian Rozo Vasquez, and Frank Walther. Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile. Magdeburg: Diedrich, 2022.
LibreCat
2021 | Journal Article | LibreCat-ID: 23469 |
Riepold, Markus, Bahman Arian, Julian Rozo Vasquez, Werner Homberg, Frank Walther, and Ansgar Trächtler. “Model Approaches for Closed-Loop Property Control for Flow Forming.” Advances in Industrial and Manufacturing Engineering, 2021. https://doi.org/10.1016/j.aime.2021.100057.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 21477
Rostek, Tim, Hanna Makeieva, and Werner Homberg. “Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming.” In Proceedings of the 13th International Conference on the Technology of Plasticity, edited by G. Daehn, J. Cao, B. Kinsey, A. E. Tekkaya, A. Vivek, and Y Yoshida, 2115–25. Forming the Future. The Minerals, Metals & Materials Series. Columbus: Springer, Cham, 2021. https://doi.org/10.1007/978-3-030-75381-8_178.
LibreCat
| DOI
2021 | Book Chapter | LibreCat-ID: 22766
Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method.” In Forming the Future, 2249–59. Springer, Cham, 2021. https://doi.org/10.1007/978-3-030-75381-8_189.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 30297
Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Magnetic Barkhausen Noise Analysis for Microstructural Effects Separation during Flow Forming of Metastable Austenite 304L.” In Proceedings of the 11th International Workshop NDT in Progress, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23465 |
Arian, Bahman, Werner Homberg, Markus Riepold, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Forming of Metastable Austenitic Stainless Steel Tubes with Axially Graded Martensite Content by Flow-Forming.” Liège: ULiège Library, 2021.
LibreCat
| Download (ext.)
2021 | Book Chapter | LibreCat-ID: 30296
Wiens, Eugen, Werner Homberg, Bahman Arian, Kerstin Möhring, and Frank Walther. “Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming.” In Forming the Future. Cham: Springer International Publishing, 2021. https://doi.org/10.1007/978-3-030-75381-8_160.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 26082
Wischer, Christian, Eugen Wiens, and Werner Homberg. “Joining with Versatile Joining Elements Formed by Friction Spinning.” Journal of Advanced Joining Processes 3 (2021). https://doi.org/10.1016/j.jajp.2021.100060.
LibreCat
| DOI
2021 | Conference (Editor) | LibreCat-ID: 22453
Wiens, Eugen, Christian Wischer, and Werner Homberg, eds. Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC), 2021. https://doi.org/10.25518/esaform21.4682.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 22965
Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Microstructural Investigation on Phase Transformation during Flow Forming of the Metastable Austenite AISI 304 .” In 54. Metallographie-Tagung, 75–81, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 30713
Rostek, Tim, Eugen Wiens, and Werner Homberg. “Joining with Versatile Friction-Spun Joint Connectors.” Procedia Manufacturing 47 (2020): 395–99. https://doi.org/10.1016/j.promfg.2020.04.313.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 21447
Wiens, Eugen, Eugen Djakow, and Werner Homberg. “Some Ideas for the Further Development of Hydroforming Process Chains.” In Nebu/Nehy 2020, 2020.
LibreCat
2019 | Conference Paper | LibreCat-ID: 21451
Rostek, Tim, and Werner Homberg. “Improved Set up Strategies for Steel Strip Straightening Machines.” In AIP Conference Proceedings 2113, 170018, Vol. 2113. AIP Conference Proceedings. AIP Publishing, 2019. https://doi.org/10.1063/1.5112734.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 15068
Wiens, Eugen, and Werner Homberg. “Forming Analysis of Tailored Tubes with an Internal Contoured Wall Thickness and External Axial Ribs Manufactured by Internal Flow-Turning.” In PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019. https://doi.org/10.1063/1.5112535.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21457
Diekmann, Uwe, Werner Homberg, Jens Prehm, Tim Rostek, Nils Schönhoff, Dmitri Tabakajew, Andreea Trasca, and Haris Uysal. “Optimization of Tooling Design for Hot Mandrel Bending of Pipe Elbows.” In Materials Science Forum, 918:159–64. Trans Tech Publications Ltd, 2018. https://doi.org/10.4028/www.scientific.net/msf.918.159.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21458
Rostek, Tim, and Werner Homberg. “Grading Technologies for the Tanufacture of Innovative Cutting Blades.” In AIP Conference Proceedings 1960, 100013, Vol. 1960. AIP Conference Proceedings. AIP Publishing, 2018. https://doi.org/10.1063/1.5034953.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21465
Homberg, Werner, Tim Rostek, Mirko Schaper, Olexandr Grydin, Anatolii Andreiev, Alexander Brosius, and Christina Guilleaume. “Hybride Verbundstrukturen Aus Aluminium Und Titan Für Leichtbauanwendungen.” ILH Insight. Paderborn: Universität Paderborn, 2018.
LibreCat
2018 | Report | LibreCat-ID: 30257
Wiens, Eugen, and Werner Homberg. Herstellung innovativer Stahlhalbzeuge mit wanddicke- und festigkeitsveränderlichen Eigenschaften für den Leichtbau durch Innendrückwalzen (IDW). Vol. P 948. Forschung für die Praxis. Düsseldorf, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 15067
Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – Extended Manufacturing Possibilities in Tailored Tube Production.” MATEC Web of Conferences, 2018. https://doi.org/10.1051/matecconf/201819011002.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21449
Rostek, Tim, and Werner Homberg. “Locally Graded Steel Materials for Self-Sharpening Cutting Blades.” Procedia Engineering 207 (2017): 2185–90. https://doi.org/10.1016/j.proeng.2017.10.979.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21452
Homberg, Werner, Tim Rostek, Mirko Schaper, Olexandr Grydin, Anatolii Andreiev, Alexander Brosius, and Marc Tulke. “Development of Hybrid Directionally Reinforced Structural Parts for Lightweight Applications.” AIP Conference Proceedings. AIP Publishing, 2017. https://doi.org/10.1063/1.5008055.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21453
Rostek, Tim, and Werner Homberg. “Locally Graded Steel Materials for Self-Sharpening Cutting Blades.” Edited by J. Allwood. Procedia Engineering. Elsevier Ltd, 2017. https://doi.org/10.1016/j.proeng.2017.10.979.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 30259
Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – a New Approach for the Manufacture of Tailored Tubes with a Constant External Diameter.” Procedia Engineering 207 (2017): 1755–60. https://doi.org/10.1016/j.proeng.2017.10.934.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 30261
Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – Efficient Manufacture of Load-Adapted Tubes with a Constant External Diameter.” In Proceedings of the International Conference on Steels in Cars and Trucks SCT 2017, 2017.
LibreCat
2016 | Journal Article | LibreCat-ID: 21466
Rostek, Tim, and Werner Homberg. “Layered Steel Materials for the Manufacture of Self-Sharpening Cutting Blades.” International Journal of Material Forming, 2016.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21467
Homberg, Werner, and Tim Rostek. “Innovative Processing Techniques for the Manufacture of High-Performance Active Elements from Ultra High-Strength Steel Plate.” Proceedings of METEC & 2nd Estad, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21454
Homberg, Werner, Tim Rostek, and Eugen Wiens. “Internal Flow-Turning - An Innovative Technology for the Manufacture of Tailored Tubes.” In Key Engineering Materials, edited by M. Merklein, J. R. Duflou, A. G. Leacock, M. Micari, and H. Hagenah, 639:65–70. Key Engineering Materials. Zurich: Trans Tech Publications Ltd, 2015. https://doi.org/10.4028/www.scientific.net/kem.639.65.
LibreCat
| DOI
2013 | Book | LibreCat-ID: 21469
Homberg, Werner, and Tim Rostek. Hochleistungsaktivelemente für landwirtschaftliche Maschinen aus ultrahochfestem Stahl. Forschung für die Praxis. Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2013.
LibreCat
2013 | Journal Article | LibreCat-ID: 21455
Homberg, Werner, and Tim Rostek. “Thermo-Mechanical Hardening of Ultra High-Strength Steels.” Key Engineering Materials, 2013, 133–40. https://doi.org/10.4028/www.scientific.net/kem.549.133.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 21468
Homberg, Werner, and Tim Rostek. “Processing of Ultra High-Strength Steels Involving Thermo-Mechanical Hardening Effects.” Zurich: Proc. IDDRG 2013, 2013.
LibreCat
2012 | Book | LibreCat-ID: 21470
Tekkaya, A. Erman, Thomas Mennecart, Jörg Witulski, Werner Homberg, and Tim Rostek. Presshärten von Rohren und Profilen mittels formlos festen Stoffen. Forschung für die Praxis . Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, Hans Christian, Ulf Damerow, Christian Lauter, Bernhard Gorny, Frederik Hankeln, Werner Homberg, Thomas Tröster, Hans Jürgen Maier, and Rolf Mahnken. “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.” Key Engineering Materials, 2012, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., Frederik Hankeln, Christian Lauter, H. C. Schmidt, U. Damerow, Rolf Mahnken, H. J. Maier, Thomas Tröster, and Werner Homberg. “Simulation and Manufacturing of Deep Drawn Parts Reinforced by Carbon Fibre Prepregs,” 2012.
LibreCat
2011 | Journal Article | LibreCat-ID: 21456
Homberg, Werner, and Tim Rostek. “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels.” Key Engineering Materials, 2011, 229–34. https://doi.org/10.4028/www.scientific.net/kem.473.229.
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 21472
Mennecart, Thomas, Tim Rostek, Jörg Witulski, Alexander Brosius, A. Erman Takkaya, and Werner Homberg. “Presshärten von Rohren und Profilen mittels formlos fester Stoffe.” Tagungsband zum 6. Erlanger Workshop Warmblechumformung. Erlangen: Meisenbach, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 21474
Homberg, Werner, and Tim Rostek. “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels.” In Proceedings. of the 10th International Conference on Technology of Plasticity (ICTP). Berlin: Springer, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15970
Lauter, Christian, Ulf Damerow, Meike Frantz, Thomas Tröster, and Werner Homberg. “Produktionsverfahren Zur Herstellung Höchstfester Hybrider Leichtbaustrukturen Für Den Einsatz Im Automobil,” 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15991
Lauter, Christian, J. Dau, Thomas Tröster, and Werner Homberg. “Manufacturing Processes for Automotive Structures in Multi-Material Design Consisting of Sheet Metal and CFRP Prepregs,” 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15994
Dau, J., Christian Lauter, U. Damerow, Werner Homberg, and Thomas Tröster. “Multi-Material Systems for Tailored Automotive Structural Components,” 2011.
LibreCat
Search
Filter Publications
Display / Sort
Export / Embed
76 Publications
2024 | Conference Paper | LibreCat-ID: 53638
Dahms, Frederik Simon, and Werner Homberg. “Modular 3D Roller Straightening – A New Approach to Straightening and Forming of Spring Steel Wires (X10CrNi18-8).” In Materials Research Proceedings. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-154.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 54650
Borgert, Thomas, Ansgar Bernhard Nordieker, and Werner Homberg. “Form-Based Manufacturing of Aluminium and Steel Auxiliary Joining Elements as the Basis for an Efficient Joining Operation.” In Materials Research Proceedings. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-180.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 54649
Borgert, Thomas, Ansgar Bernhard Nordieker, Eugen Wiens, and Werner Homberg. “Investigations to Improve the Tool Life during Thermomechanical and Incremental Forming of Steel Auxiliary Joining Elements.” Journal of Advanced Joining Processes 9 (2024). https://doi.org/10.1016/j.jajp.2024.100185.
LibreCat
| DOI
2024 | Book Chapter | LibreCat-ID: 57190
Rozo Vasquez, Julian , Lukas Kersting, Bahman Arian, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Soft Sensor Model of Phase Transformation During Flow Forming of Metastable Austenitic Steel AISI 304L.” In Lecture Notes in Mechanical Engineering. Cham: Springer International Publishing, 2024. https://doi.org/10.1007/978-3-031-58006-2_10.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 57189
Rozo Vasquez, Julian , Hanigah Kanagarajah, Bahman Arian, Lukas Kersting, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Barkhausen Noise- and Eddy Current-Based Measurements for Online Detection of Deformation-Induced Martensite during Flow Forming of Metastable Austenitic Steel AISI 304L.” Authorea, Inc., 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 57173
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “α’-Martensite Grading Techniques in Reverse Flow Forming of AISI 304L.” In Materials Research Proceedings, Vol. 44. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903254-76.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 57178
Kersting, Lukas, Sebastian Sander, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Improving the Flow Forming Process by a Novel Closed-Loop Control.” In Materials Research Proceedings, Vol. 41. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-158.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 57183
Peters, Henning, Eugen Djakow, Tim Rostek, Andreas Mazur, Ansgar Trächtler, Werner Homberg, and Barbara Hammer. “Novel Approach for Data-Driven Modelling of Multi-Stage Straightening and Bending Processes.” In Materials Research Proceedings, Vol. 41. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-252.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 57171
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Thermomechanical Reverse Flow Forming of AISI 304L.” In Materials Research Proceedings, Vol. 41. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-151.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44316
Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Softsensor Model of Phase Transformation during Flow Forming of Metastable Austenitic Steel AISI 304L,” 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48001
Bathelt, Lukas, Eugen Djakow, Frederik Dahms, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Neuartiger Ansatz Zum Richten von Zwei- Und Dreidimensionalen Fehlern an Einem Federdraht.” In Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion, Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen. Ilmenau, Germany: ISLE Steuerungstechnik und Leistungselektronik, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44314 |
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Cryogenic Reverse Flow Forming of AISI 304L.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-219.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 48075 |
Homberg, Werner, Bahman Arian, Viktor Arne, Thomas Borgert, Alexander Brosius, Peter Groche, Christoph Hartmann, et al. “Softsensors: Key Component of Property Control in Forming Technology.” Production Engineering, 2023. https://doi.org/10.1007/s11740-023-01227-1.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 43031
Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44036
Borgert, Thomas, and Werner Homberg. “Analysis of Temperature Effect on Strength and Microstructure in Friction Induced Recycling Process (FIRP).” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-211.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44035
Dahms, Frederik, and Werner Homberg. “Energy and Resource-Efficient Forming of Gas Cylinders by Friction-Spinning.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-208.
LibreCat
| Files available
| DOI
2023 | Conference Paper | LibreCat-ID: 43044
Holzmüller, Maik, Maik Linnemann, Werner Homberg, Verena Psyk, Verena Kräusel, and Janika Kroos. “Proof of Concept for Incremental Sheet Metal Forming by Means of Electromagnetic and Electrohydraulic High-Speed Forming.” In Materials Research Proceedings, 25:11–18. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-2.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43045
Knyazyev, Mykhaylo, Maik Holzmüller, and Werner Homberg. “Investigation of Pressure Fields Generated by Two Simultaneous Discharges in Liquid Initiated by Wires.” Journal of Manufacturing and Materials Processing 7, no. 1 (2023). https://doi.org/10.3390/jmmp7010040.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 46691
Dahms, Frederik, and Werner Homberg. “Analysis and Modelling of the Deformation in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming Process.” In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41023-9_72.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 46483
Borgert, Thomas, Maximilian Henke, and Werner Homberg. “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040147.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 46752
Borgert, Thomas, and Werner Homberg. “Friction-Induced Recycled Aluminium Semi-Finished Products in Thermo-Mechanical Joining Technology.” In Lecture Notes in Mechanical Engineering. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_1.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 28941
Afsahnoudeh, Reza, Maik Holzmüller, Fabian Bader, Werner Homberg, and Eugeny Y. Kenig. “Numerische Untersuchung von Oberflächenstrukturierung Zur Erhöhung Der Effizienz von Kissenplatten-Wärmeübertragern,” 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44312
Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Bauteilfertigung.” At - Automatisierungstechnik 71, no. 1 (2023): 68–81. https://doi.org/10.1515/auto-2022-0106.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44315
Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Control Strategy for Angular Gradations by Means of the Flow Forming Process.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-220.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44318
Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Detection of Phase Transformation during Plastic Deformation of Metastable Austenitic Steel AISI 304L by Means of X-Ray Diffraction Pattern Analysis.” Metals, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 56626
Holzmüller, Maik, Yi Gong, Fabian Bader, Armin Henke, and Werner Homberg. “Numerical Approach to Model a Novel Electrohydraulic Incremental Forming Process for the Manufacture of Pillow Plate Heat Exchangers.” In Lecture Notes in Mechanical Engineering. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41023-9_69.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 56627
Afsahnoudeh, Reza, Andreas Wortmeier, Maik Holzmüller, Yi Gong, Werner Homberg, and Eugeny Kenig. “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis.” Energies 16, no. 21 (2023). https://doi.org/10.3390/en16217284.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34001 |
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, and Julian Rozo Vasquez. “Produktkennzeichnung Durch Lokal Definierte Einstellung von Ferromagnetischen Eigenschaften Beim Drückwalzen von Metastabilen Stahlwerkstoffen.” In 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, 333–47. Aachen, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34003 |
Arian, Bahman, Annika Oesterwinter, Werner Homberg, Julian Rozo Vasquez, Frank Walther, Lukas Kersting, and Ansgar Trächtler. “A Flow Forming Process Model to Predict Workpiece Properties in AISI 304L.” In 19th Int. Conference on Metal Forming 2022, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34216
Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32412
Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.” Key Engineering Materials 926 (2022): 683–89. https://doi.org/10.4028/p-3rk19y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29357
Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.” Metals 12, no. 1 (2022). https://doi.org/10.3390/met12010158.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34000
Rozo Vasquez, Julian, Hanigah Kanagarajah, Bahman Arian, Lukas Kersting, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.” Practical Metallography 59, no. 11 (2022): 660–75. https://doi.org/10.1515/pm-2022-0064.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33999
Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.” Key Engineering Materials 926 (2022): 862–74. https://doi.org/10.4028/p-yp2hj3.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36563
Rozo Vasquez, Julian, Frank Walther, Bahman Arian, Werner Homberg, Lukas Kersting, and Ansgar Trächtler. “Soft Sensor Concept for Micromagnetic Depth-Specific Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” In Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.
LibreCat
2022 | Book | LibreCat-ID: 36412
Kersting, Lukas, Ansgar Trächtler, Bahman Arian, Werner Homberg, Julian Rozo Vasquez, and Frank Walther. Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile. Magdeburg: Diedrich, 2022.
LibreCat
2021 | Journal Article | LibreCat-ID: 23469 |
Riepold, Markus, Bahman Arian, Julian Rozo Vasquez, Werner Homberg, Frank Walther, and Ansgar Trächtler. “Model Approaches for Closed-Loop Property Control for Flow Forming.” Advances in Industrial and Manufacturing Engineering, 2021. https://doi.org/10.1016/j.aime.2021.100057.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 21477
Rostek, Tim, Hanna Makeieva, and Werner Homberg. “Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming.” In Proceedings of the 13th International Conference on the Technology of Plasticity, edited by G. Daehn, J. Cao, B. Kinsey, A. E. Tekkaya, A. Vivek, and Y Yoshida, 2115–25. Forming the Future. The Minerals, Metals & Materials Series. Columbus: Springer, Cham, 2021. https://doi.org/10.1007/978-3-030-75381-8_178.
LibreCat
| DOI
2021 | Book Chapter | LibreCat-ID: 22766
Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method.” In Forming the Future, 2249–59. Springer, Cham, 2021. https://doi.org/10.1007/978-3-030-75381-8_189.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 30297
Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Magnetic Barkhausen Noise Analysis for Microstructural Effects Separation during Flow Forming of Metastable Austenite 304L.” In Proceedings of the 11th International Workshop NDT in Progress, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23465 |
Arian, Bahman, Werner Homberg, Markus Riepold, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Forming of Metastable Austenitic Stainless Steel Tubes with Axially Graded Martensite Content by Flow-Forming.” Liège: ULiège Library, 2021.
LibreCat
| Download (ext.)
2021 | Book Chapter | LibreCat-ID: 30296
Wiens, Eugen, Werner Homberg, Bahman Arian, Kerstin Möhring, and Frank Walther. “Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming.” In Forming the Future. Cham: Springer International Publishing, 2021. https://doi.org/10.1007/978-3-030-75381-8_160.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 26082
Wischer, Christian, Eugen Wiens, and Werner Homberg. “Joining with Versatile Joining Elements Formed by Friction Spinning.” Journal of Advanced Joining Processes 3 (2021). https://doi.org/10.1016/j.jajp.2021.100060.
LibreCat
| DOI
2021 | Conference (Editor) | LibreCat-ID: 22453
Wiens, Eugen, Christian Wischer, and Werner Homberg, eds. Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC), 2021. https://doi.org/10.25518/esaform21.4682.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 22965
Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Microstructural Investigation on Phase Transformation during Flow Forming of the Metastable Austenite AISI 304 .” In 54. Metallographie-Tagung, 75–81, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 30713
Rostek, Tim, Eugen Wiens, and Werner Homberg. “Joining with Versatile Friction-Spun Joint Connectors.” Procedia Manufacturing 47 (2020): 395–99. https://doi.org/10.1016/j.promfg.2020.04.313.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 21447
Wiens, Eugen, Eugen Djakow, and Werner Homberg. “Some Ideas for the Further Development of Hydroforming Process Chains.” In Nebu/Nehy 2020, 2020.
LibreCat
2019 | Conference Paper | LibreCat-ID: 21451
Rostek, Tim, and Werner Homberg. “Improved Set up Strategies for Steel Strip Straightening Machines.” In AIP Conference Proceedings 2113, 170018, Vol. 2113. AIP Conference Proceedings. AIP Publishing, 2019. https://doi.org/10.1063/1.5112734.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 15068
Wiens, Eugen, and Werner Homberg. “Forming Analysis of Tailored Tubes with an Internal Contoured Wall Thickness and External Axial Ribs Manufactured by Internal Flow-Turning.” In PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019. https://doi.org/10.1063/1.5112535.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21457
Diekmann, Uwe, Werner Homberg, Jens Prehm, Tim Rostek, Nils Schönhoff, Dmitri Tabakajew, Andreea Trasca, and Haris Uysal. “Optimization of Tooling Design for Hot Mandrel Bending of Pipe Elbows.” In Materials Science Forum, 918:159–64. Trans Tech Publications Ltd, 2018. https://doi.org/10.4028/www.scientific.net/msf.918.159.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21458
Rostek, Tim, and Werner Homberg. “Grading Technologies for the Tanufacture of Innovative Cutting Blades.” In AIP Conference Proceedings 1960, 100013, Vol. 1960. AIP Conference Proceedings. AIP Publishing, 2018. https://doi.org/10.1063/1.5034953.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21465
Homberg, Werner, Tim Rostek, Mirko Schaper, Olexandr Grydin, Anatolii Andreiev, Alexander Brosius, and Christina Guilleaume. “Hybride Verbundstrukturen Aus Aluminium Und Titan Für Leichtbauanwendungen.” ILH Insight. Paderborn: Universität Paderborn, 2018.
LibreCat
2018 | Report | LibreCat-ID: 30257
Wiens, Eugen, and Werner Homberg. Herstellung innovativer Stahlhalbzeuge mit wanddicke- und festigkeitsveränderlichen Eigenschaften für den Leichtbau durch Innendrückwalzen (IDW). Vol. P 948. Forschung für die Praxis. Düsseldorf, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 15067
Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – Extended Manufacturing Possibilities in Tailored Tube Production.” MATEC Web of Conferences, 2018. https://doi.org/10.1051/matecconf/201819011002.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21449
Rostek, Tim, and Werner Homberg. “Locally Graded Steel Materials for Self-Sharpening Cutting Blades.” Procedia Engineering 207 (2017): 2185–90. https://doi.org/10.1016/j.proeng.2017.10.979.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21452
Homberg, Werner, Tim Rostek, Mirko Schaper, Olexandr Grydin, Anatolii Andreiev, Alexander Brosius, and Marc Tulke. “Development of Hybrid Directionally Reinforced Structural Parts for Lightweight Applications.” AIP Conference Proceedings. AIP Publishing, 2017. https://doi.org/10.1063/1.5008055.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21453
Rostek, Tim, and Werner Homberg. “Locally Graded Steel Materials for Self-Sharpening Cutting Blades.” Edited by J. Allwood. Procedia Engineering. Elsevier Ltd, 2017. https://doi.org/10.1016/j.proeng.2017.10.979.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 30259
Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – a New Approach for the Manufacture of Tailored Tubes with a Constant External Diameter.” Procedia Engineering 207 (2017): 1755–60. https://doi.org/10.1016/j.proeng.2017.10.934.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 30261
Wiens, Eugen, and Werner Homberg. “Internal Flow-Turning – Efficient Manufacture of Load-Adapted Tubes with a Constant External Diameter.” In Proceedings of the International Conference on Steels in Cars and Trucks SCT 2017, 2017.
LibreCat
2016 | Journal Article | LibreCat-ID: 21466
Rostek, Tim, and Werner Homberg. “Layered Steel Materials for the Manufacture of Self-Sharpening Cutting Blades.” International Journal of Material Forming, 2016.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21467
Homberg, Werner, and Tim Rostek. “Innovative Processing Techniques for the Manufacture of High-Performance Active Elements from Ultra High-Strength Steel Plate.” Proceedings of METEC & 2nd Estad, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21454
Homberg, Werner, Tim Rostek, and Eugen Wiens. “Internal Flow-Turning - An Innovative Technology for the Manufacture of Tailored Tubes.” In Key Engineering Materials, edited by M. Merklein, J. R. Duflou, A. G. Leacock, M. Micari, and H. Hagenah, 639:65–70. Key Engineering Materials. Zurich: Trans Tech Publications Ltd, 2015. https://doi.org/10.4028/www.scientific.net/kem.639.65.
LibreCat
| DOI
2013 | Book | LibreCat-ID: 21469
Homberg, Werner, and Tim Rostek. Hochleistungsaktivelemente für landwirtschaftliche Maschinen aus ultrahochfestem Stahl. Forschung für die Praxis. Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2013.
LibreCat
2013 | Journal Article | LibreCat-ID: 21455
Homberg, Werner, and Tim Rostek. “Thermo-Mechanical Hardening of Ultra High-Strength Steels.” Key Engineering Materials, 2013, 133–40. https://doi.org/10.4028/www.scientific.net/kem.549.133.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 21468
Homberg, Werner, and Tim Rostek. “Processing of Ultra High-Strength Steels Involving Thermo-Mechanical Hardening Effects.” Zurich: Proc. IDDRG 2013, 2013.
LibreCat
2012 | Book | LibreCat-ID: 21470
Tekkaya, A. Erman, Thomas Mennecart, Jörg Witulski, Werner Homberg, and Tim Rostek. Presshärten von Rohren und Profilen mittels formlos festen Stoffen. Forschung für die Praxis . Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, Hans Christian, Ulf Damerow, Christian Lauter, Bernhard Gorny, Frederik Hankeln, Werner Homberg, Thomas Tröster, Hans Jürgen Maier, and Rolf Mahnken. “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.” Key Engineering Materials, 2012, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., Frederik Hankeln, Christian Lauter, H. C. Schmidt, U. Damerow, Rolf Mahnken, H. J. Maier, Thomas Tröster, and Werner Homberg. “Simulation and Manufacturing of Deep Drawn Parts Reinforced by Carbon Fibre Prepregs,” 2012.
LibreCat
2011 | Journal Article | LibreCat-ID: 21456
Homberg, Werner, and Tim Rostek. “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels.” Key Engineering Materials, 2011, 229–34. https://doi.org/10.4028/www.scientific.net/kem.473.229.
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 21472
Mennecart, Thomas, Tim Rostek, Jörg Witulski, Alexander Brosius, A. Erman Takkaya, and Werner Homberg. “Presshärten von Rohren und Profilen mittels formlos fester Stoffe.” Tagungsband zum 6. Erlanger Workshop Warmblechumformung. Erlangen: Meisenbach, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 21474
Homberg, Werner, and Tim Rostek. “High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels.” In Proceedings. of the 10th International Conference on Technology of Plasticity (ICTP). Berlin: Springer, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15970
Lauter, Christian, Ulf Damerow, Meike Frantz, Thomas Tröster, and Werner Homberg. “Produktionsverfahren Zur Herstellung Höchstfester Hybrider Leichtbaustrukturen Für Den Einsatz Im Automobil,” 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15991
Lauter, Christian, J. Dau, Thomas Tröster, and Werner Homberg. “Manufacturing Processes for Automotive Structures in Multi-Material Design Consisting of Sheet Metal and CFRP Prepregs,” 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15994
Dau, J., Christian Lauter, U. Damerow, Werner Homberg, and Thomas Tröster. “Multi-Material Systems for Tailored Automotive Structural Components,” 2011.
LibreCat