Mathias Bobbert

mathias.bobbert@lwf.uni-paderborn.de
ID
7850

48 Publications

Mark all

[48]
2023 | Conference Paper | LibreCat-ID: 43090
Bielak CR, Böhnke M, Friedlein J, et al. Numerical analysis of failure modeling in clinching process chain simulation. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-33
LibreCat | DOI
 
[47]
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke M, Bielak CR, Friedlein J, et al. A calibration method for failure modeling in clinching process simulations. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-34
LibreCat | DOI
 
[46]
2023 | Book Chapter | LibreCat-ID: 52454
Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_12
LibreCat | DOI
 
[45]
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein J, Bielak CR, Böhnke M, et al. Influence of plastic orthotropy on clinching of sheet metal. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-17
LibreCat | DOI
 
[44]
2023 | Book Chapter | LibreCat-ID: 52614
Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_15
LibreCat | DOI
 
[43]
2022 | Journal Article | LibreCat-ID: 34213
Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z
LibreCat | DOI
 
[42]
2022 | Journal Article | LibreCat-ID: 32413
Bielak CR, Böhnke M, Bobbert M, Meschut G. Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials. 2022;926:1516-1526. doi:10.4028/p-5d009y
LibreCat | DOI
 
[41]
2022 | Journal Article | LibreCat-ID: 33002
Böhnke M, Unruh E, Sell S, Bobbert M, Hein D, Meschut G. Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials. 2022;926:1564-1572. doi:10.4028/p-wpuzyw
LibreCat | DOI
 
[40]
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_52
LibreCat | DOI
 
[39]
2022 | Journal Article | LibreCat-ID: 34572
Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221145886
LibreCat | DOI
 
[38]
2022 | Journal Article | LibreCat-ID: 34216
Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113
LibreCat | DOI
 
[37]
2022 | Journal Article | LibreCat-ID: 34241
Kappe F, Wituschek S, Bobbert M, Lechner M, Meschut G. Joining of multi-material structures using a versatile self-piercing riveting process. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01151-w
LibreCat | DOI
 
[36]
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl C, Kügler P, Popp J, et al. Provision of cross-domain knowledge in mechanical joining using ontologies. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01117-y
LibreCat | DOI
 
[35]
2022 | Book Chapter | LibreCat-ID: 34275
Kappe F, Wituschek S, de Pascalis V, Bobbert M, Lechner M, Meschut G. Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting. In: Materials Design and Applications IV. Springer International Publishing; 2022. doi:10.1007/978-3-031-18130-6_10
LibreCat | DOI
 
[34]
2022 | Journal Article | LibreCat-ID: 29858
Kappe F, Schadow L, Bobbert M, Meschut G. Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design. Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications. Published online 2022. doi:10.1177/14644207211070992
LibreCat | DOI
 
[33]
2022 | Journal Article | LibreCat-ID: 29857
Kappe F, Wituschek S, Bobbert M, Meschut G. Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints. Production Engineering. Published online 2022. doi:https://doi.org/10.1007/s11740-022-01105-2
LibreCat | DOI
 
[32]
2022 | Book Chapter | LibreCat-ID: 34210
Bielak CR, Böhnke M, Bobbert M, Meschut G. Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_15
LibreCat | DOI
 
[31]
2022 | Journal Article | LibreCat-ID: 30962
Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221093468
LibreCat | DOI
 
[30]
2022 | Journal Article | LibreCat-ID: 30963
Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z
LibreCat | DOI
 
[29]
2022 | Journal Article | LibreCat-ID: 34068
Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100134
LibreCat | DOI
 
[28]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin S, Bielak CR, Bobbert M, Tröster T, Meschut G. Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01103-w
LibreCat | DOI | Download (ext.)
 
[27]
2022 | Journal Article | LibreCat-ID: 36332 | OA
Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials. 2022;24(10). doi:10.1002/adem.202200874
LibreCat | DOI | Download (ext.)
 
[26]
2022 | Journal Article | LibreCat-ID: 29724
Neuser M, Böhnke M, Grydin O, Bobbert M, Schaper M, Meschut G. Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221075838
LibreCat | DOI
 
[25]
2021 | Book | LibreCat-ID: 21800
Sander S, Bobbert M, Meschut G. Intrinsische  Hybridverbunde für  Leichtbautragstrukturen. Springer Vieweg; 2021.
LibreCat
 
[24]
2021 | Conference Paper | LibreCat-ID: 20807 | OA
Bielak CR, Böhnke M, Bobbert M, Meschut G. Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. doi:10.25518/esaform21.4298
LibreCat | DOI | Download (ext.)
 
[23]
2021 | Journal Article | LibreCat-ID: 25556 | OA
Böhnke M, Rossel MS, Bielak CR, Bobbert M, Meschut G. Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. The International Journal of Advanced Manufacturing Technology. Published online 2021. doi:10.1007/s00170-021-07986-4
LibreCat | DOI | Download (ext.)
 
[22]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel W-G, Bobbert M, Böhme M, et al. Hybridprofile für Trag- und Crashstrukturen. In: Intrinsische Hybridverbunde Für Leichtbautragstrukturen. ; 2021. doi:10.1007/978-3-662-62833-1_3
LibreCat | DOI
 
[21]
2021 | Journal Article | LibreCat-ID: 34227
Rossel MS, Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Key Engineering Materials. 2021;883:81-88. doi:10.4028/www.scientific.net/kem.883.81
LibreCat | DOI
 
[20]
2021 | Conference Paper | LibreCat-ID: 34222
Kappe F, Bielak CR, Sartisson V, Bobbert M, Meschut G. Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters. In: ESAFORM 2021. University of Liege; 2021. doi:10.25518/esaform21.4277
LibreCat | DOI
 
[19]
2021 | Journal Article | LibreCat-ID: 22798
Böhnke M, Kappe F, Bobbert M, Meschut G. Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. Materials Testing. 2021;63(6):493-500. doi:10.1515/mt-2020-0082
LibreCat | DOI
 
[18]
2021 | Journal Article | LibreCat-ID: 34226
Kappe F, Bobbert M, Meschut G. New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. Key Engineering Materials. 2021;883:3-10. doi:10.4028/www.scientific.net/kem.883.3
LibreCat | DOI
 
[17]
2021 | Conference Paper | LibreCat-ID: 21811
Rossel MS, Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. In: Sheet Metal 2021. Vol 883. Key Engineering Materials. Trans Tech Publications Ltd; 2021:81-88. doi:10.4028/www.scientific.net/KEM.883.81
LibreCat | DOI
 
[16]
2021 | Journal Article | LibreCat-ID: 24537
Neuser M, Kappe F, Busch M, et al. Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012005
LibreCat | DOI
 
[15]
2020 | Journal Article | LibreCat-ID: 20678
Bielak CR, Böhnke M, Beck R, Bobbert M, Meschut G. Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes . Published online 2020. doi:https://doi.org/10.1016/j.jajp.2020.100038
LibreCat | DOI
 
[14]
2020 | Conference Abstract | LibreCat-ID: 20344 | OA
Bielak CR, Böhnke M, Bobbert M, Meschut G. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.
LibreCat | Files available
 
[13]
2020 | Conference Paper | LibreCat-ID: 20680
Kappe F, Wituschek S, Lechner M, Bobbert M, Meschut G, Merklein M. Investigation of influencing parameters on the joint formation of the self-piercing riveting process. In: ; 2020.
LibreCat
 
[12]
2019 | Book | LibreCat-ID: 20677
Bobbert M. Untersuchungen Zu Kontinuums- Und Bruchmechanischen Methoden Für Die Prognose Des Crashverhaltens Toleranzbehafteter Strukturklebverbindungen.; 2019.
LibreCat
 
[11]
2018 | Journal Article | LibreCat-ID: 15958
Zinn C, Bobbert M, Dammann C, et al. Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering. Published online 2018:173-185. doi:10.1016/j.compositesb.2018.05.030
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 24557
Kießling R, Ihlemann J, Pohl M, et al. On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces. Applied Composite Materials. Published online 2016:251-269. doi:10.1007/s10443-016-9526-z
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 42893 | OA
Schwarzkopf G, Bobbert M, Teutenberg D, Meschut G, Matzenmiller A. Tolerance Analysis of Adhesive Bonds in Crash Simulation. Procedia CIRP. 2016;43:321-326. doi:10.1016/j.procir.2016.02.151
LibreCat | DOI | Download (ext.)
 
[8]
2016 | Journal Article | LibreCat-ID: 15963
Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites. 2016;2:272-298. doi:10.1504/ijautoc.2016.10005305
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. In: ; 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn C, Bobbert M, Dammann C, et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. In: ; 2016.
LibreCat
 
[5]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert M, Augethaler F, Wang Z, Tröster T, Meschut G. Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications. Journal of Materials Science Research. Published online 2016. doi:10.5539/jmsr.v6n1p15
LibreCat | DOI
 
[4]
2016 | Journal Article | LibreCat-ID: 16141
Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites. Published online 2016. doi:10.1504/ijautoc.2016.10005305
LibreCat | DOI
 
[3]
2016 | Journal Article | LibreCat-ID: 19391
Schwarzkopf G, Bobbert M, Teutenberg D, Meschut G, Matzenmiller A. Tolerance Analysis of Adhesive Bonds in Crash Simulation. Procedia CIRP. Published online 2016:321-326. doi:10.1016/j.procir.2016.02.151
LibreCat | DOI
 
[2]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. In: ; 2015.
LibreCat
 
[1]
2013 | Journal Article | LibreCat-ID: 19396
Kruschinski G, Matzenmiller A, Bobbert M, Teutenberg D, Meschut G. Simulation und Bewertung von Fertigungstoleranzen. adhäsion KLEBEN & DICHTEN. 2013:38-43. doi:10.1365/s35145-013-0287-7
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed

48 Publications

Mark all

[48]
2023 | Conference Paper | LibreCat-ID: 43090
Bielak CR, Böhnke M, Friedlein J, et al. Numerical analysis of failure modeling in clinching process chain simulation. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-33
LibreCat | DOI
 
[47]
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke M, Bielak CR, Friedlein J, et al. A calibration method for failure modeling in clinching process simulations. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-34
LibreCat | DOI
 
[46]
2023 | Book Chapter | LibreCat-ID: 52454
Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_12
LibreCat | DOI
 
[45]
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein J, Bielak CR, Böhnke M, et al. Influence of plastic orthotropy on clinching of sheet metal. In: Materials Research Proceedings. Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-17
LibreCat | DOI
 
[44]
2023 | Book Chapter | LibreCat-ID: 52614
Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_15
LibreCat | DOI
 
[43]
2022 | Journal Article | LibreCat-ID: 34213
Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z
LibreCat | DOI
 
[42]
2022 | Journal Article | LibreCat-ID: 32413
Bielak CR, Böhnke M, Bobbert M, Meschut G. Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials. 2022;926:1516-1526. doi:10.4028/p-5d009y
LibreCat | DOI
 
[41]
2022 | Journal Article | LibreCat-ID: 33002
Böhnke M, Unruh E, Sell S, Bobbert M, Hein D, Meschut G. Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials. 2022;926:1564-1572. doi:10.4028/p-wpuzyw
LibreCat | DOI
 
[40]
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_52
LibreCat | DOI
 
[39]
2022 | Journal Article | LibreCat-ID: 34572
Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221145886
LibreCat | DOI
 
[38]
2022 | Journal Article | LibreCat-ID: 34216
Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113
LibreCat | DOI
 
[37]
2022 | Journal Article | LibreCat-ID: 34241
Kappe F, Wituschek S, Bobbert M, Lechner M, Meschut G. Joining of multi-material structures using a versatile self-piercing riveting process. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01151-w
LibreCat | DOI
 
[36]
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl C, Kügler P, Popp J, et al. Provision of cross-domain knowledge in mechanical joining using ontologies. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01117-y
LibreCat | DOI
 
[35]
2022 | Book Chapter | LibreCat-ID: 34275
Kappe F, Wituschek S, de Pascalis V, Bobbert M, Lechner M, Meschut G. Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting. In: Materials Design and Applications IV. Springer International Publishing; 2022. doi:10.1007/978-3-031-18130-6_10
LibreCat | DOI
 
[34]
2022 | Journal Article | LibreCat-ID: 29858
Kappe F, Schadow L, Bobbert M, Meschut G. Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design. Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications. Published online 2022. doi:10.1177/14644207211070992
LibreCat | DOI
 
[33]
2022 | Journal Article | LibreCat-ID: 29857
Kappe F, Wituschek S, Bobbert M, Meschut G. Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints. Production Engineering. Published online 2022. doi:https://doi.org/10.1007/s11740-022-01105-2
LibreCat | DOI
 
[32]
2022 | Book Chapter | LibreCat-ID: 34210
Bielak CR, Böhnke M, Bobbert M, Meschut G. Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_15
LibreCat | DOI
 
[31]
2022 | Journal Article | LibreCat-ID: 30962
Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221093468
LibreCat | DOI
 
[30]
2022 | Journal Article | LibreCat-ID: 30963
Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z
LibreCat | DOI
 
[29]
2022 | Journal Article | LibreCat-ID: 34068
Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100134
LibreCat | DOI
 
[28]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin S, Bielak CR, Bobbert M, Tröster T, Meschut G. Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01103-w
LibreCat | DOI | Download (ext.)
 
[27]
2022 | Journal Article | LibreCat-ID: 36332 | OA
Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials. 2022;24(10). doi:10.1002/adem.202200874
LibreCat | DOI | Download (ext.)
 
[26]
2022 | Journal Article | LibreCat-ID: 29724
Neuser M, Böhnke M, Grydin O, Bobbert M, Schaper M, Meschut G. Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221075838
LibreCat | DOI
 
[25]
2021 | Book | LibreCat-ID: 21800
Sander S, Bobbert M, Meschut G. Intrinsische  Hybridverbunde für  Leichtbautragstrukturen. Springer Vieweg; 2021.
LibreCat
 
[24]
2021 | Conference Paper | LibreCat-ID: 20807 | OA
Bielak CR, Böhnke M, Bobbert M, Meschut G. Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. doi:10.25518/esaform21.4298
LibreCat | DOI | Download (ext.)
 
[23]
2021 | Journal Article | LibreCat-ID: 25556 | OA
Böhnke M, Rossel MS, Bielak CR, Bobbert M, Meschut G. Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. The International Journal of Advanced Manufacturing Technology. Published online 2021. doi:10.1007/s00170-021-07986-4
LibreCat | DOI | Download (ext.)
 
[22]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel W-G, Bobbert M, Böhme M, et al. Hybridprofile für Trag- und Crashstrukturen. In: Intrinsische Hybridverbunde Für Leichtbautragstrukturen. ; 2021. doi:10.1007/978-3-662-62833-1_3
LibreCat | DOI
 
[21]
2021 | Journal Article | LibreCat-ID: 34227
Rossel MS, Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Key Engineering Materials. 2021;883:81-88. doi:10.4028/www.scientific.net/kem.883.81
LibreCat | DOI
 
[20]
2021 | Conference Paper | LibreCat-ID: 34222
Kappe F, Bielak CR, Sartisson V, Bobbert M, Meschut G. Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters. In: ESAFORM 2021. University of Liege; 2021. doi:10.25518/esaform21.4277
LibreCat | DOI
 
[19]
2021 | Journal Article | LibreCat-ID: 22798
Böhnke M, Kappe F, Bobbert M, Meschut G. Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. Materials Testing. 2021;63(6):493-500. doi:10.1515/mt-2020-0082
LibreCat | DOI
 
[18]
2021 | Journal Article | LibreCat-ID: 34226
Kappe F, Bobbert M, Meschut G. New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. Key Engineering Materials. 2021;883:3-10. doi:10.4028/www.scientific.net/kem.883.3
LibreCat | DOI
 
[17]
2021 | Conference Paper | LibreCat-ID: 21811
Rossel MS, Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. In: Sheet Metal 2021. Vol 883. Key Engineering Materials. Trans Tech Publications Ltd; 2021:81-88. doi:10.4028/www.scientific.net/KEM.883.81
LibreCat | DOI
 
[16]
2021 | Journal Article | LibreCat-ID: 24537
Neuser M, Kappe F, Busch M, et al. Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012005
LibreCat | DOI
 
[15]
2020 | Journal Article | LibreCat-ID: 20678
Bielak CR, Böhnke M, Beck R, Bobbert M, Meschut G. Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes . Published online 2020. doi:https://doi.org/10.1016/j.jajp.2020.100038
LibreCat | DOI
 
[14]
2020 | Conference Abstract | LibreCat-ID: 20344 | OA
Bielak CR, Böhnke M, Bobbert M, Meschut G. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.
LibreCat | Files available
 
[13]
2020 | Conference Paper | LibreCat-ID: 20680
Kappe F, Wituschek S, Lechner M, Bobbert M, Meschut G, Merklein M. Investigation of influencing parameters on the joint formation of the self-piercing riveting process. In: ; 2020.
LibreCat
 
[12]
2019 | Book | LibreCat-ID: 20677
Bobbert M. Untersuchungen Zu Kontinuums- Und Bruchmechanischen Methoden Für Die Prognose Des Crashverhaltens Toleranzbehafteter Strukturklebverbindungen.; 2019.
LibreCat
 
[11]
2018 | Journal Article | LibreCat-ID: 15958
Zinn C, Bobbert M, Dammann C, et al. Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering. Published online 2018:173-185. doi:10.1016/j.compositesb.2018.05.030
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 24557
Kießling R, Ihlemann J, Pohl M, et al. On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces. Applied Composite Materials. Published online 2016:251-269. doi:10.1007/s10443-016-9526-z
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 42893 | OA
Schwarzkopf G, Bobbert M, Teutenberg D, Meschut G, Matzenmiller A. Tolerance Analysis of Adhesive Bonds in Crash Simulation. Procedia CIRP. 2016;43:321-326. doi:10.1016/j.procir.2016.02.151
LibreCat | DOI | Download (ext.)
 
[8]
2016 | Journal Article | LibreCat-ID: 15963
Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites. 2016;2:272-298. doi:10.1504/ijautoc.2016.10005305
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. In: ; 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn C, Bobbert M, Dammann C, et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. In: ; 2016.
LibreCat
 
[5]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert M, Augethaler F, Wang Z, Tröster T, Meschut G. Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications. Journal of Materials Science Research. Published online 2016. doi:10.5539/jmsr.v6n1p15
LibreCat | DOI
 
[4]
2016 | Journal Article | LibreCat-ID: 16141
Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites. Published online 2016. doi:10.1504/ijautoc.2016.10005305
LibreCat | DOI
 
[3]
2016 | Journal Article | LibreCat-ID: 19391
Schwarzkopf G, Bobbert M, Teutenberg D, Meschut G, Matzenmiller A. Tolerance Analysis of Adhesive Bonds in Crash Simulation. Procedia CIRP. Published online 2016:321-326. doi:10.1016/j.procir.2016.02.151
LibreCat | DOI
 
[2]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. In: ; 2015.
LibreCat
 
[1]
2013 | Journal Article | LibreCat-ID: 19396
Kruschinski G, Matzenmiller A, Bobbert M, Teutenberg D, Meschut G. Simulation und Bewertung von Fertigungstoleranzen. adhäsion KLEBEN & DICHTEN. 2013:38-43. doi:10.1365/s35145-013-0287-7
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed