26 Publications

Mark all

[26]
2022 | Journal Article | LibreCat-ID: 29858
Kappe, F., Schadow, L., Bobbert, M., & Meschut, G. (2022). Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design. Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications. https://doi.org/10.1177/14644207211070992
LibreCat | DOI
 
[25]
2022 | Journal Article | LibreCat-ID: 29857
Kappe, F., Wituschek, S., Bobbert, M., & Meschut, G. (2022). Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints. Production Engineering. https://doi.org/10.1007/s11740-022-01105-2
LibreCat | DOI
 
[24]
2022 | Journal Article | LibreCat-ID: 29724
Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., & Meschut, G. (2022). Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210758. https://doi.org/10.1177/14644207221075838
LibreCat | DOI
 
[23]
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl, C., Kügler, P., Popp, J., Bielak, C. R., Bobbert, M., Drummer, D., Meschut, G., Wartzack, S., & Schleich, B. (2022). Provision of cross-domain knowledge in mechanical joining using ontologies. Production Engineering. https://doi.org/10.1007/s11740-022-01117-y
LibreCat | DOI
 
[22]
2022 | Journal Article | LibreCat-ID: 30963
Ewenz, L., Bielak, C. R., Otroshi, M., Bobbert, M., Meschut, G., & Zimmermann, M. (2022). Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering, 16(2–3), 305–313. https://doi.org/10.1007/s11740-022-01124-z
LibreCat | DOI
 
[21]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin, S., Bielak, C. R., Bobbert, M., Tröster, T., & Meschut, G. (2022). Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. https://doi.org/10.1007/s11740-021-01103-w
LibreCat | DOI | Download (ext.)
 
[20]
2022 | Journal Article | LibreCat-ID: 33002
Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., & Meschut, G. (2022). Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials, 926, 1564–1572. https://doi.org/10.4028/p-wpuzyw
LibreCat | DOI
 
[19]
2022 | Journal Article | LibreCat-ID: 30962
Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210934. https://doi.org/10.1177/14644207221093468
LibreCat | DOI
 
[18]
2022 | Journal Article | LibreCat-ID: 32413
Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials, 926, 1516–1526. https://doi.org/10.4028/p-5d009y
LibreCat | DOI
 
[17]
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2022). Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In The Minerals, Metals & Materials Series. NUMISHEET 2022, Toronto, Kanada. Springer International Publishing. https://doi.org/10.1007/978-3-031-06212-4_52
LibreCat | DOI
 
[16]
2021 | Book | LibreCat-ID: 21800
Sander, S., Bobbert, M., & Meschut, G. (2021). Intrinsische  Hybridverbunde für  Leichtbautragstrukturen. Springer Vieweg.
LibreCat
 
[15]
2021 | Conference Paper | LibreCat-ID: 21811
Rossel, M. S., Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2021). Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Sheet Metal 2021, 883, 81–88. https://doi.org/10.4028/www.scientific.net/KEM.883.81
LibreCat | DOI
 
[14]
2021 | Journal Article | LibreCat-ID: 25556 | OA
Böhnke, M., Rossel, M. S., Bielak, C. R., Bobbert, M., & Meschut, G. (2021). Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-021-07986-4
LibreCat | DOI | Download (ext.)
 
[13]
2021 | Journal Article | LibreCat-ID: 22798
Böhnke, M., Kappe, F., Bobbert, M., & Meschut, G. (2021). Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. Materials Testing, 63(6), 493–500. https://doi.org/10.1515/mt-2020-0082
LibreCat | DOI
 
[12]
2021 | Conference Paper | LibreCat-ID: 21175
Kappe, F., Bielak, C. R., Sartisson, V., Bobbert, M., & Meschut, G. (2021). Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters. ESAFORM 2021, Lüttich .
LibreCat
 
[11]
2021 | Conference Paper | LibreCat-ID: 21176
Kappe, F., Bobbert, M., & Meschut, G. (2021). New approach for versatile self piercing riveting: joining system and auxiliary part. SheMet 2021, Nürnberg.
LibreCat
 
[10]
2021 | Conference Paper | LibreCat-ID: 20807 | OA
Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (n.d.). Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. ESAFORM 2021, Lüttich. https://doi.org/10.25518/esaform21.4298
LibreCat | DOI | Download (ext.)
 
[9]
2021 | Journal Article | LibreCat-ID: 24537
Neuser, M., Kappe, F., Busch, M., Grydin, O., Bobbert, M., Schaper, M., Meschut, G., & Hausotte, T. (2021). Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering, Article 012005. https://doi.org/10.1088/1757-899x/1157/1/012005
LibreCat | DOI
 
[8]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, W.-G., Bobbert, M., Böhme, M., Dammann, C., Dittes, A., Gießmann, M., Hühne, C., Ihlemann, J., Kießling, R., Lampke, T., Lenz, P., Mahnken, R., Meschut, G., Müller, R., Nier, M., Prussak, R., Riemer, M., Sander, S., Schaper, M., … Zinn, C. (2021). Hybridprofile für Trag- und Crashstrukturen. In Intrinsische Hybridverbunde für Leichtbautragstrukturen. https://doi.org/10.1007/978-3-662-62833-1_3
LibreCat | DOI
 
[7]
2020 | Journal Article | LibreCat-ID: 20678
Bielak, C. R., Böhnke, M., Beck, R., Bobbert, M., & Meschut, G. (2020). Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes. . https://doi.org/10.1016/j.jajp.2020.100038
LibreCat | DOI
 
[6]
2020 | Conference Abstract | LibreCat-ID: 20344
Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (n.d.). Development of a numerical method for analyzing the robustness of clinching in versatile process chains. Material Science and Engineering Congress - MSE 2020, Darmstadt.
LibreCat | Files available
 
[5]
2020 | Conference Paper | LibreCat-ID: 20680
Kappe, F., Wituschek, S., Lechner, M., Bobbert, M., Meschut, G., & Merklein, M. (2020). Investigation of influencing parameters on the joint formation of the self-piercing riveting process. Material Science and Engineering Congress - MSE 2020, Darmstadt .
LibreCat
 
[4]
2019 | Book | LibreCat-ID: 20677
Bobbert, M. (2019). Untersuchungen zu kontinuums- und bruchmechanischen Methoden für die Prognose des Crashverhaltens toleranzbehafteter Strukturklebverbindungen.
LibreCat
 
[3]
2016 | Journal Article | LibreCat-ID: 19391
Schwarzkopf, G., Bobbert, M., Teutenberg, D., Meschut, G., & Matzenmiller, A. (2016). Tolerance Analysis of Adhesive Bonds in Crash Simulation. Procedia CIRP, 321–326. https://doi.org/10.1016/j.procir.2016.02.151
LibreCat | DOI
 
[2]
2016 | Journal Article | LibreCat-ID: 24557
Kießling, R., Ihlemann, J., Pohl, M., Stommel, M., Dammann, C., Mahnken, R., Bobbert, M., Meschut, G., Hirsch, F., & Kästner, M. (2016). On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces. Applied Composite Materials, 251–269. https://doi.org/10.1007/s10443-016-9526-z
LibreCat | DOI
 
[1]
2013 | Journal Article | LibreCat-ID: 19396
Kruschinski, G., Matzenmiller, A., Bobbert, M., Teutenberg, D., & Meschut, G. (2013). Simulation und Bewertung von Fertigungstoleranzen. adhäsion KLEBEN & DICHTEN, 38–43. https://doi.org/10.1365/s35145-013-0287-7
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: APA

Export / Embed

26 Publications

Mark all

[26]
2022 | Journal Article | LibreCat-ID: 29858
Kappe, F., Schadow, L., Bobbert, M., & Meschut, G. (2022). Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design. Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications. https://doi.org/10.1177/14644207211070992
LibreCat | DOI
 
[25]
2022 | Journal Article | LibreCat-ID: 29857
Kappe, F., Wituschek, S., Bobbert, M., & Meschut, G. (2022). Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints. Production Engineering. https://doi.org/10.1007/s11740-022-01105-2
LibreCat | DOI
 
[24]
2022 | Journal Article | LibreCat-ID: 29724
Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., & Meschut, G. (2022). Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210758. https://doi.org/10.1177/14644207221075838
LibreCat | DOI
 
[23]
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl, C., Kügler, P., Popp, J., Bielak, C. R., Bobbert, M., Drummer, D., Meschut, G., Wartzack, S., & Schleich, B. (2022). Provision of cross-domain knowledge in mechanical joining using ontologies. Production Engineering. https://doi.org/10.1007/s11740-022-01117-y
LibreCat | DOI
 
[22]
2022 | Journal Article | LibreCat-ID: 30963
Ewenz, L., Bielak, C. R., Otroshi, M., Bobbert, M., Meschut, G., & Zimmermann, M. (2022). Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering, 16(2–3), 305–313. https://doi.org/10.1007/s11740-022-01124-z
LibreCat | DOI
 
[21]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin, S., Bielak, C. R., Bobbert, M., Tröster, T., & Meschut, G. (2022). Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. https://doi.org/10.1007/s11740-021-01103-w
LibreCat | DOI | Download (ext.)
 
[20]
2022 | Journal Article | LibreCat-ID: 33002
Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., & Meschut, G. (2022). Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials, 926, 1564–1572. https://doi.org/10.4028/p-wpuzyw
LibreCat | DOI
 
[19]
2022 | Journal Article | LibreCat-ID: 30962
Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210934. https://doi.org/10.1177/14644207221093468
LibreCat | DOI
 
[18]
2022 | Journal Article | LibreCat-ID: 32413
Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials, 926, 1516–1526. https://doi.org/10.4028/p-5d009y
LibreCat | DOI
 
[17]
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2022). Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In The Minerals, Metals & Materials Series. NUMISHEET 2022, Toronto, Kanada. Springer International Publishing. https://doi.org/10.1007/978-3-031-06212-4_52
LibreCat | DOI
 
[16]
2021 | Book | LibreCat-ID: 21800
Sander, S., Bobbert, M., & Meschut, G. (2021). Intrinsische  Hybridverbunde für  Leichtbautragstrukturen. Springer Vieweg.
LibreCat
 
[15]
2021 | Conference Paper | LibreCat-ID: 21811
Rossel, M. S., Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2021). Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Sheet Metal 2021, 883, 81–88. https://doi.org/10.4028/www.scientific.net/KEM.883.81
LibreCat | DOI
 
[14]
2021 | Journal Article | LibreCat-ID: 25556 | OA
Böhnke, M., Rossel, M. S., Bielak, C. R., Bobbert, M., & Meschut, G. (2021). Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-021-07986-4
LibreCat | DOI | Download (ext.)
 
[13]
2021 | Journal Article | LibreCat-ID: 22798
Böhnke, M., Kappe, F., Bobbert, M., & Meschut, G. (2021). Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. Materials Testing, 63(6), 493–500. https://doi.org/10.1515/mt-2020-0082
LibreCat | DOI
 
[12]
2021 | Conference Paper | LibreCat-ID: 21175
Kappe, F., Bielak, C. R., Sartisson, V., Bobbert, M., & Meschut, G. (2021). Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters. ESAFORM 2021, Lüttich .
LibreCat
 
[11]
2021 | Conference Paper | LibreCat-ID: 21176
Kappe, F., Bobbert, M., & Meschut, G. (2021). New approach for versatile self piercing riveting: joining system and auxiliary part. SheMet 2021, Nürnberg.
LibreCat
 
[10]
2021 | Conference Paper | LibreCat-ID: 20807 | OA
Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (n.d.). Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. ESAFORM 2021, Lüttich. https://doi.org/10.25518/esaform21.4298
LibreCat | DOI | Download (ext.)
 
[9]
2021 | Journal Article | LibreCat-ID: 24537
Neuser, M., Kappe, F., Busch, M., Grydin, O., Bobbert, M., Schaper, M., Meschut, G., & Hausotte, T. (2021). Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering, Article 012005. https://doi.org/10.1088/1757-899x/1157/1/012005
LibreCat | DOI
 
[8]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, W.-G., Bobbert, M., Böhme, M., Dammann, C., Dittes, A., Gießmann, M., Hühne, C., Ihlemann, J., Kießling, R., Lampke, T., Lenz, P., Mahnken, R., Meschut, G., Müller, R., Nier, M., Prussak, R., Riemer, M., Sander, S., Schaper, M., … Zinn, C. (2021). Hybridprofile für Trag- und Crashstrukturen. In Intrinsische Hybridverbunde für Leichtbautragstrukturen. https://doi.org/10.1007/978-3-662-62833-1_3
LibreCat | DOI
 
[7]
2020 | Journal Article | LibreCat-ID: 20678
Bielak, C. R., Böhnke, M., Beck, R., Bobbert, M., & Meschut, G. (2020). Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes. . https://doi.org/10.1016/j.jajp.2020.100038
LibreCat | DOI
 
[6]
2020 | Conference Abstract | LibreCat-ID: 20344
Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (n.d.). Development of a numerical method for analyzing the robustness of clinching in versatile process chains. Material Science and Engineering Congress - MSE 2020, Darmstadt.
LibreCat | Files available
 
[5]
2020 | Conference Paper | LibreCat-ID: 20680
Kappe, F., Wituschek, S., Lechner, M., Bobbert, M., Meschut, G., & Merklein, M. (2020). Investigation of influencing parameters on the joint formation of the self-piercing riveting process. Material Science and Engineering Congress - MSE 2020, Darmstadt .
LibreCat
 
[4]
2019 | Book | LibreCat-ID: 20677
Bobbert, M. (2019). Untersuchungen zu kontinuums- und bruchmechanischen Methoden für die Prognose des Crashverhaltens toleranzbehafteter Strukturklebverbindungen.
LibreCat
 
[3]
2016 | Journal Article | LibreCat-ID: 19391
Schwarzkopf, G., Bobbert, M., Teutenberg, D., Meschut, G., & Matzenmiller, A. (2016). Tolerance Analysis of Adhesive Bonds in Crash Simulation. Procedia CIRP, 321–326. https://doi.org/10.1016/j.procir.2016.02.151
LibreCat | DOI
 
[2]
2016 | Journal Article | LibreCat-ID: 24557
Kießling, R., Ihlemann, J., Pohl, M., Stommel, M., Dammann, C., Mahnken, R., Bobbert, M., Meschut, G., Hirsch, F., & Kästner, M. (2016). On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces. Applied Composite Materials, 251–269. https://doi.org/10.1007/s10443-016-9526-z
LibreCat | DOI
 
[1]
2013 | Journal Article | LibreCat-ID: 19396
Kruschinski, G., Matzenmiller, A., Bobbert, M., Teutenberg, D., & Meschut, G. (2013). Simulation und Bewertung von Fertigungstoleranzen. adhäsion KLEBEN & DICHTEN, 38–43. https://doi.org/10.1365/s35145-013-0287-7
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: APA

Export / Embed