48 Publications
2023 | Conference Paper | LibreCat-ID: 43090
Numerical analysis of failure modeling in clinching process chain simulation
C.R. Bielak, M. Böhnke, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
C.R. Bielak, M. Böhnke, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Conference Paper | LibreCat-ID: 43462
A calibration method for failure modeling in clinching process simulations
M. Böhnke, C.R. Bielak, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
M. Böhnke, C.R. Bielak, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Book Chapter | LibreCat-ID: 52454
Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
LibreCat
| DOI
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
2023 | Conference Paper | LibreCat-ID: 43463
Influence of plastic orthotropy on clinching of sheet metal
J. Friedlein, C.R. Bielak, M. Böhnke, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
J. Friedlein, C.R. Bielak, M. Böhnke, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Book Chapter | LibreCat-ID: 52614
Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
2022 | Journal Article | LibreCat-ID: 34213
Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
LibreCat
| DOI
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
2022 | Journal Article | LibreCat-ID: 32413
Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials 926 (2022) 1516–1526.
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials 926 (2022) 1516–1526.
2022 | Journal Article | LibreCat-ID: 36332 | 
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat
| DOI
| Download (ext.)
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
2022 | Journal Article | LibreCat-ID: 29724
Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 33002
Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.
LibreCat
| DOI
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.
2022 | Book Chapter | LibreCat-ID: 33003
Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 34572
Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 34216
Review on mechanical joining by plastic deformation
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
2022 | Journal Article | LibreCat-ID: 34241
Joining of multi-material structures using a versatile self-piercing riveting process
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 30100
Provision of cross-domain knowledge in mechanical joining using ontologies
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
LibreCat
| DOI
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
2022 | Book Chapter | LibreCat-ID: 34275
Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 29858
Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
LibreCat
| DOI
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 29857
Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
2022 | Book Chapter | LibreCat-ID: 34210
Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 30962
Numerical investigation of a friction test to determine the friction coefficients for the clinching process
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 30963
Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
LibreCat
| DOI
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
2022 | Journal Article | LibreCat-ID: 34068
A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process
B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022).
LibreCat
| DOI
B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022).
2022 | Journal Article | LibreCat-ID: 29951 |
Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
| Download (ext.)
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).
2021 | Book | LibreCat-ID: 21800
Intrinsische Hybridverbunde für Leichtbautragstrukturen
S. Sander, M. Bobbert, G. Meschut, Intrinsische Hybridverbunde für Leichtbautragstrukturen, Springer Vieweg, 2021.
LibreCat
S. Sander, M. Bobbert, G. Meschut, Intrinsische Hybridverbunde für Leichtbautragstrukturen, Springer Vieweg, 2021.
2021 | Conference Paper | LibreCat-ID: 20807 |
Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.
LibreCat
| DOI
| Download (ext.)
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.
2021 | Conference Paper | LibreCat-ID: 21811
Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Sheet Metal 2021, Trans Tech Publications Ltd, 2021, pp. 81–88.
LibreCat
| DOI
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Sheet Metal 2021, Trans Tech Publications Ltd, 2021, pp. 81–88.
2021 | Journal Article | LibreCat-ID: 24537
Joining suitability of cast aluminium for self-piercing riveting
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat
| DOI
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
2021 | Journal Article | LibreCat-ID: 25556 |
Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes
M. Böhnke, M.S. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).
LibreCat
| DOI
| Download (ext.)
M. Böhnke, M.S. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).
2021 | Book Chapter | LibreCat-ID: 29086
Hybridprofile für Trag- und Crashstrukturen
W.-G. Drossel, M. Bobbert, M. Böhme, C. Dammann, A. Dittes, M. Gießmann, C. Hühne, J. Ihlemann, R. Kießling, T. Lampke, P. Lenz, R. Mahnken, G. Meschut, R. Müller, M. Nier, R. Prussak, M. Riemer, S. Sander, M. Schaper, I. Scharf, M. Scholze, S.-D. Schwöbel, S. Sharafiev, M. Sinapius, D. Stefaniak, T. Tröster, M.F.-X. Wagner, Z. Wang, C. Zinn, in: Intrinsische Hybridverbunde Für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
LibreCat
| DOI
W.-G. Drossel, M. Bobbert, M. Böhme, C. Dammann, A. Dittes, M. Gießmann, C. Hühne, J. Ihlemann, R. Kießling, T. Lampke, P. Lenz, R. Mahnken, G. Meschut, R. Müller, M. Nier, R. Prussak, M. Riemer, S. Sander, M. Schaper, I. Scharf, M. Scholze, S.-D. Schwöbel, S. Sharafiev, M. Sinapius, D. Stefaniak, T. Tröster, M.F.-X. Wagner, Z. Wang, C. Zinn, in: Intrinsische Hybridverbunde Für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
2021 | Journal Article | LibreCat-ID: 34227
Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 81–88.
LibreCat
| DOI
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 81–88.
2021 | Conference Paper | LibreCat-ID: 34222
Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.
LibreCat
| DOI
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.
2021 | Journal Article | LibreCat-ID: 22798
Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.
LibreCat
| DOI
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.
2021 | Journal Article | LibreCat-ID: 34226
New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
LibreCat
| DOI
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
2020 | Journal Article | LibreCat-ID: 20678
Numerical analysis of the robustness of clinching process considering the pre-forming of the parts
C.R. Bielak, M. Böhnke, R. Beck, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes. (2020).
LibreCat
| DOI
C.R. Bielak, M. Böhnke, R. Beck, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes. (2020).
2020 | Conference Abstract | LibreCat-ID: 20344 |
Development of a numerical method for analyzing the robustness of clinching in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Material Science and Engineering Congress - MSE 2020, n.d.
LibreCat
| Files available
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Material Science and Engineering Congress - MSE 2020, n.d.
2020 | Conference Paper | LibreCat-ID: 20680
Investigation of influencing parameters on the joint formation of the self-piercing riveting process
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.
LibreCat
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.
2019 | Book | LibreCat-ID: 20677
Untersuchungen zu kontinuums- und bruchmechanischen Methoden für die Prognose des Crashverhaltens toleranzbehafteter Strukturklebverbindungen
M. Bobbert, Untersuchungen Zu Kontinuums- Und Bruchmechanischen Methoden Für Die Prognose Des Crashverhaltens Toleranzbehafteter Strukturklebverbindungen, 2019.
LibreCat
M. Bobbert, Untersuchungen Zu Kontinuums- Und Bruchmechanischen Methoden Für Die Prognose Des Crashverhaltens Toleranzbehafteter Strukturklebverbindungen, 2019.
2018 | Journal Article | LibreCat-ID: 15958
Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, T. Tröster, R. Mahnken, G. Meschut, M. Schaper, Composites Part B: Engineering (2018) 173–185.
LibreCat
| DOI
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, T. Tröster, R. Mahnken, G. Meschut, M. Schaper, Composites Part B: Engineering (2018) 173–185.
2016 | Journal Article | LibreCat-ID: 24557
On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces
R. Kießling, J. Ihlemann, M. Pohl, M. Stommel, C. Dammann, R. Mahnken, M. Bobbert, G. Meschut, F. Hirsch, M. Kästner, Applied Composite Materials (2016) 251–269.
LibreCat
| DOI
R. Kießling, J. Ihlemann, M. Pohl, M. Stommel, C. Dammann, R. Mahnken, M. Bobbert, G. Meschut, F. Hirsch, M. Kästner, Applied Composite Materials (2016) 251–269.
2016 | Journal Article | LibreCat-ID: 42893 |
Tolerance Analysis of Adhesive Bonds in Crash Simulation
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia CIRP 43 (2016) 321–326.
LibreCat
| DOI
| Download (ext.)
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia CIRP 43 (2016) 321–326.
2016 | Journal Article | LibreCat-ID: 15963
Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites 2 (2016) 272–298.
LibreCat
| DOI
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites 2 (2016) 272–298.
2016 | Conference Paper | LibreCat-ID: 16138
Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, M. Schaper, T. Tröster, in: 2016.
LibreCat
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, M. Schaper, T. Tröster, in: 2016.
2016 | Conference Paper | LibreCat-ID: 16265
Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, M. Schaper, G. Meschut, R. Mahnken, T. Tröster, in: 2016.
LibreCat
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, M. Schaper, G. Meschut, R. Mahnken, T. Tröster, in: 2016.
2016 | Journal Article | LibreCat-ID: 16140
Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, G. Meschut, Journal of Materials Science Research (2016).
LibreCat
| DOI
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, G. Meschut, Journal of Materials Science Research (2016).
2016 | Journal Article | LibreCat-ID: 16141
Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites (2016).
LibreCat
| DOI
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites (2016).
2016 | Journal Article | LibreCat-ID: 19391
Tolerance Analysis of Adhesive Bonds in Crash Simulation
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia CIRP (2016) 321–326.
LibreCat
| DOI
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia CIRP (2016) 321–326.
2015 | Conference Paper | LibreCat-ID: 16262
Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, G. Meschut, M. Schaper, T. Tröster, in: 2015.
LibreCat
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, G. Meschut, M. Schaper, T. Tröster, in: 2015.
2013 | Journal Article | LibreCat-ID: 19396
Simulation und Bewertung von Fertigungstoleranzen
G. Kruschinski, A. Matzenmiller, M. Bobbert, D. Teutenberg, G. Meschut, adhäsion KLEBEN & DICHTEN (2013) 38–43.
LibreCat
| DOI
G. Kruschinski, A. Matzenmiller, M. Bobbert, D. Teutenberg, G. Meschut, adhäsion KLEBEN & DICHTEN (2013) 38–43.
48 Publications
2023 | Conference Paper | LibreCat-ID: 43090
Numerical analysis of failure modeling in clinching process chain simulation
C.R. Bielak, M. Böhnke, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
C.R. Bielak, M. Böhnke, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Conference Paper | LibreCat-ID: 43462
A calibration method for failure modeling in clinching process simulations
M. Böhnke, C.R. Bielak, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
M. Böhnke, C.R. Bielak, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Book Chapter | LibreCat-ID: 52454
Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
LibreCat
| DOI
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
2023 | Conference Paper | LibreCat-ID: 43463
Influence of plastic orthotropy on clinching of sheet metal
J. Friedlein, C.R. Bielak, M. Böhnke, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
J. Friedlein, C.R. Bielak, M. Böhnke, M. Bobbert, J. Mergheim, P. Steinmann, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Book Chapter | LibreCat-ID: 52614
Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
2022 | Journal Article | LibreCat-ID: 34213
Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
LibreCat
| DOI
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
2022 | Journal Article | LibreCat-ID: 32413
Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials 926 (2022) 1516–1526.
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials 926 (2022) 1516–1526.
2022 | Journal Article | LibreCat-ID: 36332 |
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat
| DOI
| Download (ext.)
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
2022 | Journal Article | LibreCat-ID: 29724
Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 33002
Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.
LibreCat
| DOI
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.
2022 | Book Chapter | LibreCat-ID: 33003
Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 34572
Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 34216
Review on mechanical joining by plastic deformation
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
2022 | Journal Article | LibreCat-ID: 34241
Joining of multi-material structures using a versatile self-piercing riveting process
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 30100
Provision of cross-domain knowledge in mechanical joining using ontologies
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
LibreCat
| DOI
C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022).
2022 | Book Chapter | LibreCat-ID: 34275
Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 29858
Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
LibreCat
| DOI
F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 29857
Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).
2022 | Book Chapter | LibreCat-ID: 34210
Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 30962
Numerical investigation of a friction test to determine the friction coefficients for the clinching process
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 30963
Numerical and experimental identification of fatigue crack initiation sites in clinched joints
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
LibreCat
| DOI
L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann, Production Engineering 16 (2022) 305–313.
2022 | Journal Article | LibreCat-ID: 34068
A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process
B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022).
LibreCat
| DOI
B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022).
2022 | Journal Article | LibreCat-ID: 29951 |
Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
| Download (ext.)
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).
2021 | Book | LibreCat-ID: 21800
Intrinsische Hybridverbunde für Leichtbautragstrukturen
S. Sander, M. Bobbert, G. Meschut, Intrinsische Hybridverbunde für Leichtbautragstrukturen, Springer Vieweg, 2021.
LibreCat
S. Sander, M. Bobbert, G. Meschut, Intrinsische Hybridverbunde für Leichtbautragstrukturen, Springer Vieweg, 2021.
2021 | Conference Paper | LibreCat-ID: 20807 |
Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.
LibreCat
| DOI
| Download (ext.)
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.
2021 | Conference Paper | LibreCat-ID: 21811
Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Sheet Metal 2021, Trans Tech Publications Ltd, 2021, pp. 81–88.
LibreCat
| DOI
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Sheet Metal 2021, Trans Tech Publications Ltd, 2021, pp. 81–88.
2021 | Journal Article | LibreCat-ID: 24537
Joining suitability of cast aluminium for self-piercing riveting
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat
| DOI
M. Neuser, F. Kappe, M. Busch, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, T. Hausotte, IOP Conference Series: Materials Science and Engineering (2021).
2021 | Journal Article | LibreCat-ID: 25556 |
Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes
M. Böhnke, M.S. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).
LibreCat
| DOI
| Download (ext.)
M. Böhnke, M.S. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).
2021 | Book Chapter | LibreCat-ID: 29086
Hybridprofile für Trag- und Crashstrukturen
W.-G. Drossel, M. Bobbert, M. Böhme, C. Dammann, A. Dittes, M. Gießmann, C. Hühne, J. Ihlemann, R. Kießling, T. Lampke, P. Lenz, R. Mahnken, G. Meschut, R. Müller, M. Nier, R. Prussak, M. Riemer, S. Sander, M. Schaper, I. Scharf, M. Scholze, S.-D. Schwöbel, S. Sharafiev, M. Sinapius, D. Stefaniak, T. Tröster, M.F.-X. Wagner, Z. Wang, C. Zinn, in: Intrinsische Hybridverbunde Für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
LibreCat
| DOI
W.-G. Drossel, M. Bobbert, M. Böhme, C. Dammann, A. Dittes, M. Gießmann, C. Hühne, J. Ihlemann, R. Kießling, T. Lampke, P. Lenz, R. Mahnken, G. Meschut, R. Müller, M. Nier, R. Prussak, M. Riemer, S. Sander, M. Schaper, I. Scharf, M. Scholze, S.-D. Schwöbel, S. Sharafiev, M. Sinapius, D. Stefaniak, T. Tröster, M.F.-X. Wagner, Z. Wang, C. Zinn, in: Intrinsische Hybridverbunde Für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
2021 | Journal Article | LibreCat-ID: 34227
Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 81–88.
LibreCat
| DOI
M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 81–88.
2021 | Conference Paper | LibreCat-ID: 34222
Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.
LibreCat
| DOI
F. Kappe, C.R. Bielak, V. Sartisson, M. Bobbert, G. Meschut, in: ESAFORM 2021, University of Liege, 2021.
2021 | Journal Article | LibreCat-ID: 22798
Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.
LibreCat
| DOI
M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.
2021 | Journal Article | LibreCat-ID: 34226
New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
LibreCat
| DOI
F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
2020 | Journal Article | LibreCat-ID: 20678
Numerical analysis of the robustness of clinching process considering the pre-forming of the parts
C.R. Bielak, M. Böhnke, R. Beck, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes. (2020).
LibreCat
| DOI
C.R. Bielak, M. Böhnke, R. Beck, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes. (2020).
2020 | Conference Abstract | LibreCat-ID: 20344 |
Development of a numerical method for analyzing the robustness of clinching in versatile process chains
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Material Science and Engineering Congress - MSE 2020, n.d.
LibreCat
| Files available
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Material Science and Engineering Congress - MSE 2020, n.d.
2020 | Conference Paper | LibreCat-ID: 20680
Investigation of influencing parameters on the joint formation of the self-piercing riveting process
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.
LibreCat
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, M. Merklein, in: 2020.
2019 | Book | LibreCat-ID: 20677
Untersuchungen zu kontinuums- und bruchmechanischen Methoden für die Prognose des Crashverhaltens toleranzbehafteter Strukturklebverbindungen
M. Bobbert, Untersuchungen Zu Kontinuums- Und Bruchmechanischen Methoden Für Die Prognose Des Crashverhaltens Toleranzbehafteter Strukturklebverbindungen, 2019.
LibreCat
M. Bobbert, Untersuchungen Zu Kontinuums- Und Bruchmechanischen Methoden Für Die Prognose Des Crashverhaltens Toleranzbehafteter Strukturklebverbindungen, 2019.
2018 | Journal Article | LibreCat-ID: 15958
Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, T. Tröster, R. Mahnken, G. Meschut, M. Schaper, Composites Part B: Engineering (2018) 173–185.
LibreCat
| DOI
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, T. Tröster, R. Mahnken, G. Meschut, M. Schaper, Composites Part B: Engineering (2018) 173–185.
2016 | Journal Article | LibreCat-ID: 24557
On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces
R. Kießling, J. Ihlemann, M. Pohl, M. Stommel, C. Dammann, R. Mahnken, M. Bobbert, G. Meschut, F. Hirsch, M. Kästner, Applied Composite Materials (2016) 251–269.
LibreCat
| DOI
R. Kießling, J. Ihlemann, M. Pohl, M. Stommel, C. Dammann, R. Mahnken, M. Bobbert, G. Meschut, F. Hirsch, M. Kästner, Applied Composite Materials (2016) 251–269.
2016 | Journal Article | LibreCat-ID: 42893 |
Tolerance Analysis of Adhesive Bonds in Crash Simulation
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia CIRP 43 (2016) 321–326.
LibreCat
| DOI
| Download (ext.)
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia CIRP 43 (2016) 321–326.
2016 | Journal Article | LibreCat-ID: 15963
Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites 2 (2016) 272–298.
LibreCat
| DOI
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites 2 (2016) 272–298.
2016 | Conference Paper | LibreCat-ID: 16138
Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, M. Schaper, T. Tröster, in: 2016.
LibreCat
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, M. Schaper, T. Tröster, in: 2016.
2016 | Conference Paper | LibreCat-ID: 16265
Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, M. Schaper, G. Meschut, R. Mahnken, T. Tröster, in: 2016.
LibreCat
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, M. Schaper, G. Meschut, R. Mahnken, T. Tröster, in: 2016.
2016 | Journal Article | LibreCat-ID: 16140
Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, G. Meschut, Journal of Materials Science Research (2016).
LibreCat
| DOI
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, G. Meschut, Journal of Materials Science Research (2016).
2016 | Journal Article | LibreCat-ID: 16141
Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites (2016).
LibreCat
| DOI
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites (2016).
2016 | Journal Article | LibreCat-ID: 19391
Tolerance Analysis of Adhesive Bonds in Crash Simulation
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia CIRP (2016) 321–326.
LibreCat
| DOI
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia CIRP (2016) 321–326.
2015 | Conference Paper | LibreCat-ID: 16262
Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, G. Meschut, M. Schaper, T. Tröster, in: 2015.
LibreCat
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, G. Meschut, M. Schaper, T. Tröster, in: 2015.
2013 | Journal Article | LibreCat-ID: 19396
Simulation und Bewertung von Fertigungstoleranzen
G. Kruschinski, A. Matzenmiller, M. Bobbert, D. Teutenberg, G. Meschut, adhäsion KLEBEN & DICHTEN (2013) 38–43.
LibreCat
| DOI
G. Kruschinski, A. Matzenmiller, M. Bobbert, D. Teutenberg, G. Meschut, adhäsion KLEBEN & DICHTEN (2013) 38–43.