Mathias Bobbert

mathias.bobbert@lwf.uni-paderborn.de
ID
7850

48 Publications

Mark all

[48]
2023 | Conference Paper | LibreCat-ID: 43090
Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in Clinching Process Chain Simulation.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-33.
LibreCat | DOI
 
[47]
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching Process Simulations.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-34.
LibreCat | DOI
 
[46]
2023 | Book Chapter | LibreCat-ID: 52454
Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.
LibreCat | DOI
 
[45]
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-17 .
LibreCat | DOI
 
[44]
2023 | Book Chapter | LibreCat-ID: 52614
Bielak, Christian Roman, et al. “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_15.
LibreCat | DOI
 
[43]
2022 | Journal Article | LibreCat-ID: 34213
Ewenz, L., et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[42]
2022 | Journal Article | LibreCat-ID: 32413
Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.
LibreCat | DOI
 
[41]
2022 | Journal Article | LibreCat-ID: 33002
Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.
LibreCat | DOI
 
[40]
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke, Max, et al. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_52.
LibreCat | DOI
 
[39]
2022 | Journal Article | LibreCat-ID: 34572
Böhnke, Max, et al. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Journals, 2022, doi:10.1177/14644207221145886.
LibreCat | DOI
 
[38]
2022 | Journal Article | LibreCat-ID: 34216
Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat | DOI
 
[37]
2022 | Journal Article | LibreCat-ID: 34241
Kappe, Fabian, et al. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01151-w.
LibreCat | DOI
 
[36]
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl, Christoph, et al. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01117-y.
LibreCat | DOI
 
[35]
2022 | Book Chapter | LibreCat-ID: 34275
Kappe, Fabian, et al. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.” Materials Design and Applications IV, Springer International Publishing, 2022, doi:10.1007/978-3-031-18130-6_10.
LibreCat | DOI
 
[34]
2022 | Journal Article | LibreCat-ID: 29858
Kappe, Fabian, et al. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi:10.1177/14644207211070992.
LibreCat | DOI
 
[33]
2022 | Journal Article | LibreCat-ID: 29857
Kappe, Fabian, et al. “Determining the Properties of Multi‑range Semi‑tubular Self‑piercing Riveted Joints.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01105-2.
LibreCat | DOI
 
[32]
2022 | Book Chapter | LibreCat-ID: 34210
Bielak, Christian Roman, et al. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_15.
LibreCat | DOI
 
[31]
2022 | Journal Article | LibreCat-ID: 30962
Bielak, Christian Roman, et al. “Numerical Investigation of a Friction  Test to Determine the Friction  Coefficients for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.
LibreCat | DOI
 
[30]
2022 | Journal Article | LibreCat-ID: 30963
Ewenz, Lars, et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[29]
2022 | Journal Article | LibreCat-ID: 34068
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.
LibreCat | DOI
 
[28]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[27]
2022 | Journal Article | LibreCat-ID: 36332 | OA
Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[26]
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.
LibreCat | DOI
 
[25]
2021 | Book | LibreCat-ID: 21800
Sander, Sascha, et al. Intrinsische  Hybridverbunde für  Leichtbautragstrukturen. Springer Vieweg, 2021.
LibreCat
 
[24]
2021 | Conference Paper | LibreCat-ID: 20807 | OA
Bielak, Christian Roman, et al. Further Development of a Numerical Method for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains. doi:10.25518/esaform21.4298.
LibreCat | DOI | Download (ext.)
 
[23]
2021 | Journal Article | LibreCat-ID: 25556 | OA
Böhnke, Max, et al. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” The International Journal of Advanced Manufacturing Technology, 2021, doi:10.1007/s00170-021-07986-4.
LibreCat | DOI | Download (ext.)
 
[22]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[21]
2021 | Journal Article | LibreCat-ID: 34227
Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 81–88, doi:10.4028/www.scientific.net/kem.883.81.
LibreCat | DOI
 
[20]
2021 | Conference Paper | LibreCat-ID: 34222
Kappe, Fabian, et al. “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters.” ESAFORM 2021, University of Liege, 2021, doi:10.25518/esaform21.4277.
LibreCat | DOI
 
[19]
2021 | Journal Article | LibreCat-ID: 22798
Böhnke, Max, et al. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.” Materials Testing, vol. 63, no. 6, De Gruyter, 2021, pp. 493–500, doi:10.1515/mt-2020-0082.
LibreCat | DOI
 
[18]
2021 | Journal Article | LibreCat-ID: 34226
Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.
LibreCat | DOI
 
[17]
2021 | Conference Paper | LibreCat-ID: 21811
Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Sheet Metal 2021, vol. 883, Trans Tech Publications Ltd, 2021, pp. 81–88, doi:10.4028/www.scientific.net/KEM.883.81.
LibreCat | DOI
 
[16]
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[15]
2020 | Journal Article | LibreCat-ID: 20678
Bielak, Christian Roman, et al. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .” Journal of Advanced Joining Processes. , Elsevier, 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038.
LibreCat | DOI
 
[14]
2020 | Conference Abstract | LibreCat-ID: 20344 | OA
Bielak, Christian Roman, et al. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.
LibreCat | Files available
 
[13]
2020 | Conference Paper | LibreCat-ID: 20680
Kappe, Fabian, et al. Investigation of Influencing Parameters on the Joint Formation of the Self-Piercing Riveting Process. 2020.
LibreCat
 
[12]
2019 | Book | LibreCat-ID: 20677
Bobbert, Mathias. Untersuchungen Zu Kontinuums- Und Bruchmechanischen Methoden Für Die Prognose Des Crashverhaltens Toleranzbehafteter Strukturklebverbindungen. 2019.
LibreCat
 
[11]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, et al. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, pp. 173–85, doi:10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 24557
Kießling, R., et al. “On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces.” Applied Composite Materials, 2016, pp. 251–69, doi:10.1007/s10443-016-9526-z.
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 42893 | OA
Schwarzkopf, G., et al. “Tolerance Analysis of Adhesive Bonds in Crash Simulation.” Procedia CIRP, vol. 43, Elsevier BV, 2016, pp. 321–26, doi:10.1016/j.procir.2016.02.151.
LibreCat | DOI | Download (ext.)
 
[8]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, vol. 2, 2016, pp. 272–98, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. 2016.
LibreCat
 
[5]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert, Mathias, et al. “Novel Process Approach for In-Situ Insertion of Functional Elements in RTM-Applications.” Journal of Materials Science Research, 15, 2016, doi:10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[4]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 272, 2016, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[3]
2016 | Journal Article | LibreCat-ID: 19391
Schwarzkopf, G., et al. “Tolerance Analysis of Adhesive Bonds in Crash Simulation.” Procedia CIRP, 2016, pp. 321–26, doi:10.1016/j.procir.2016.02.151.
LibreCat | DOI
 
[2]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. 2015.
LibreCat
 
[1]
2013 | Journal Article | LibreCat-ID: 19396
Kruschinski, Georg, et al. “Simulation und Bewertung von Fertigungstoleranzen.” adhäsion KLEBEN & DICHTEN, 2013, pp. 38–43, doi:10.1365/s35145-013-0287-7.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed

48 Publications

Mark all

[48]
2023 | Conference Paper | LibreCat-ID: 43090
Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in Clinching Process Chain Simulation.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-33.
LibreCat | DOI
 
[47]
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching Process Simulations.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-34.
LibreCat | DOI
 
[46]
2023 | Book Chapter | LibreCat-ID: 52454
Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.
LibreCat | DOI
 
[45]
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-17 .
LibreCat | DOI
 
[44]
2023 | Book Chapter | LibreCat-ID: 52614
Bielak, Christian Roman, et al. “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_15.
LibreCat | DOI
 
[43]
2022 | Journal Article | LibreCat-ID: 34213
Ewenz, L., et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[42]
2022 | Journal Article | LibreCat-ID: 32413
Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.
LibreCat | DOI
 
[41]
2022 | Journal Article | LibreCat-ID: 33002
Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.
LibreCat | DOI
 
[40]
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke, Max, et al. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_52.
LibreCat | DOI
 
[39]
2022 | Journal Article | LibreCat-ID: 34572
Böhnke, Max, et al. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Journals, 2022, doi:10.1177/14644207221145886.
LibreCat | DOI
 
[38]
2022 | Journal Article | LibreCat-ID: 34216
Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat | DOI
 
[37]
2022 | Journal Article | LibreCat-ID: 34241
Kappe, Fabian, et al. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01151-w.
LibreCat | DOI
 
[36]
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl, Christoph, et al. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01117-y.
LibreCat | DOI
 
[35]
2022 | Book Chapter | LibreCat-ID: 34275
Kappe, Fabian, et al. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.” Materials Design and Applications IV, Springer International Publishing, 2022, doi:10.1007/978-3-031-18130-6_10.
LibreCat | DOI
 
[34]
2022 | Journal Article | LibreCat-ID: 29858
Kappe, Fabian, et al. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi:10.1177/14644207211070992.
LibreCat | DOI
 
[33]
2022 | Journal Article | LibreCat-ID: 29857
Kappe, Fabian, et al. “Determining the Properties of Multi‑range Semi‑tubular Self‑piercing Riveted Joints.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01105-2.
LibreCat | DOI
 
[32]
2022 | Book Chapter | LibreCat-ID: 34210
Bielak, Christian Roman, et al. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_15.
LibreCat | DOI
 
[31]
2022 | Journal Article | LibreCat-ID: 30962
Bielak, Christian Roman, et al. “Numerical Investigation of a Friction  Test to Determine the Friction  Coefficients for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.
LibreCat | DOI
 
[30]
2022 | Journal Article | LibreCat-ID: 30963
Ewenz, Lars, et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[29]
2022 | Journal Article | LibreCat-ID: 34068
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.
LibreCat | DOI
 
[28]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[27]
2022 | Journal Article | LibreCat-ID: 36332 | OA
Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[26]
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.
LibreCat | DOI
 
[25]
2021 | Book | LibreCat-ID: 21800
Sander, Sascha, et al. Intrinsische  Hybridverbunde für  Leichtbautragstrukturen. Springer Vieweg, 2021.
LibreCat
 
[24]
2021 | Conference Paper | LibreCat-ID: 20807 | OA
Bielak, Christian Roman, et al. Further Development of a Numerical Method for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains. doi:10.25518/esaform21.4298.
LibreCat | DOI | Download (ext.)
 
[23]
2021 | Journal Article | LibreCat-ID: 25556 | OA
Böhnke, Max, et al. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” The International Journal of Advanced Manufacturing Technology, 2021, doi:10.1007/s00170-021-07986-4.
LibreCat | DOI | Download (ext.)
 
[22]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[21]
2021 | Journal Article | LibreCat-ID: 34227
Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 81–88, doi:10.4028/www.scientific.net/kem.883.81.
LibreCat | DOI
 
[20]
2021 | Conference Paper | LibreCat-ID: 34222
Kappe, Fabian, et al. “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters.” ESAFORM 2021, University of Liege, 2021, doi:10.25518/esaform21.4277.
LibreCat | DOI
 
[19]
2021 | Journal Article | LibreCat-ID: 22798
Böhnke, Max, et al. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.” Materials Testing, vol. 63, no. 6, De Gruyter, 2021, pp. 493–500, doi:10.1515/mt-2020-0082.
LibreCat | DOI
 
[18]
2021 | Journal Article | LibreCat-ID: 34226
Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.
LibreCat | DOI
 
[17]
2021 | Conference Paper | LibreCat-ID: 21811
Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Sheet Metal 2021, vol. 883, Trans Tech Publications Ltd, 2021, pp. 81–88, doi:10.4028/www.scientific.net/KEM.883.81.
LibreCat | DOI
 
[16]
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[15]
2020 | Journal Article | LibreCat-ID: 20678
Bielak, Christian Roman, et al. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .” Journal of Advanced Joining Processes. , Elsevier, 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038.
LibreCat | DOI
 
[14]
2020 | Conference Abstract | LibreCat-ID: 20344 | OA
Bielak, Christian Roman, et al. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.
LibreCat | Files available
 
[13]
2020 | Conference Paper | LibreCat-ID: 20680
Kappe, Fabian, et al. Investigation of Influencing Parameters on the Joint Formation of the Self-Piercing Riveting Process. 2020.
LibreCat
 
[12]
2019 | Book | LibreCat-ID: 20677
Bobbert, Mathias. Untersuchungen Zu Kontinuums- Und Bruchmechanischen Methoden Für Die Prognose Des Crashverhaltens Toleranzbehafteter Strukturklebverbindungen. 2019.
LibreCat
 
[11]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, et al. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, pp. 173–85, doi:10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 24557
Kießling, R., et al. “On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces.” Applied Composite Materials, 2016, pp. 251–69, doi:10.1007/s10443-016-9526-z.
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 42893 | OA
Schwarzkopf, G., et al. “Tolerance Analysis of Adhesive Bonds in Crash Simulation.” Procedia CIRP, vol. 43, Elsevier BV, 2016, pp. 321–26, doi:10.1016/j.procir.2016.02.151.
LibreCat | DOI | Download (ext.)
 
[8]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, vol. 2, 2016, pp. 272–98, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. 2016.
LibreCat
 
[6]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. 2016.
LibreCat
 
[5]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert, Mathias, et al. “Novel Process Approach for In-Situ Insertion of Functional Elements in RTM-Applications.” Journal of Materials Science Research, 15, 2016, doi:10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[4]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 272, 2016, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[3]
2016 | Journal Article | LibreCat-ID: 19391
Schwarzkopf, G., et al. “Tolerance Analysis of Adhesive Bonds in Crash Simulation.” Procedia CIRP, 2016, pp. 321–26, doi:10.1016/j.procir.2016.02.151.
LibreCat | DOI
 
[2]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. 2015.
LibreCat
 
[1]
2013 | Journal Article | LibreCat-ID: 19396
Kruschinski, Georg, et al. “Simulation und Bewertung von Fertigungstoleranzen.” adhäsion KLEBEN & DICHTEN, 2013, pp. 38–43, doi:10.1365/s35145-013-0287-7.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed