Mathias Bobbert

mathias.bobbert@lwf.uni-paderborn.de
ID
7850

59 Publications

Mark all

[59]
2025 | Journal Article | LibreCat-ID: 58495
P. K. Holtkamp, F. Kappe, P. Probst, M. Bobbert, and G. Meschut, “Investigation of local heat treatment strategies for a multi-range capable rivet and the influence on joint formation and load-bearing capacity,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2025, doi: 10.1177/14644207241307508.
LibreCat | DOI
 
[58]
2025 | Journal Article | LibreCat-ID: 59872 | OA
M. Neuser, M. C. Schlichter, K.-P. Hoyer, M. Bobbert, G. Meschut, and M. Schaper, “Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys,” 44th Conference of the International Deep Drawing Research Group (IDDRG 2025), vol. 408, Art. no. 01081, 2025, doi: 10.1051/matecconf/202540801081.
LibreCat | DOI | Download (ext.)
 
[57]
2025 | Conference Paper | LibreCat-ID: 59878
M. C. Schlichter et al., “Experimental and numerical investigation of the influence of rolling-induced sheet metal deformation on SPR joints,” in Materials Research Proceedings, 2025, vol. 54, doi: 10.21741/9781644903599-148.
LibreCat | DOI
 
[56]
2025 | Conference Paper | LibreCat-ID: 59587
C. Chen et al., “High-cycle fatigue testing and parameter identification for numerical simulation of aluminum alloy EN AW-6014,” in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-23.
LibreCat | DOI
 
[55]
2025 | Conference Paper | LibreCat-ID: 60002
Ö. Harabati et al., “Cross-process damage modeling: A process-chain case study of clinching and self-pierced riveting for aluminum connections,” in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-19.
LibreCat | DOI
 
[54]
2025 | Journal Article | LibreCat-ID: 58807
M. Neuser et al., “Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12,” The Journal of Materials: Design and Applications, Part L, 2025, doi: 10.1177/14644207251319922.
LibreCat | DOI
 
[53]
2025 | Journal Article | LibreCat-ID: 59584
J. Friedlein et al., “Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations,” Journal of Advanced Joining Processes, vol. 11, Art. no. 100299, 2025, doi: 10.1016/j.jajp.2025.100299.
LibreCat | DOI
 
[52]
2025 | Conference Paper | LibreCat-ID: 60290
S. Lüder et al., “Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting,” in Materials Research Proceedings, Paderborn, 2025, vol. 52, pp. 101–108, doi: 10.21741/9781644903551-13.
LibreCat | DOI
 
[51]
2025 | Conference Paper | LibreCat-ID: 60440
P. K. Holtkamp, C. R. Bielak, M. Bobbert, and G. Meschut, “Simulation of the joining process of graded hardened multi-range capable rivets,” in Materials Research Proceedings, 2025, vol. 54, doi: 10.21741/9781644903599-153.
LibreCat | DOI
 
[50]
2024 | Journal Article | LibreCat-ID: 57742
M. Böhnke, C. R. Bielak, R. Beck, M. Bobbert, and G. Meschut, “Development of a friction model for the numerical simulation of clinching processes,” Friction, 2024, doi: 10.26599/frict.2025.9441052.
LibreCat | DOI
 
[49]
2024 | Journal Article | LibreCat-ID: 59585
J. Friedlein et al., “Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining,” Journal of Manufacturing and Materials Processing, vol. 8, no. 4, Art. no. 157, 2024, doi: 10.3390/jmmp8040157.
LibreCat | DOI
 
[48]
2023 | Conference Paper | LibreCat-ID: 43090
C. R. Bielak et al., “Numerical analysis of failure modeling in clinching process chain simulation,” presented at the SHEMET 2023, 2023, doi: 10.21741/9781644902417-33.
LibreCat | DOI
 
[47]
2023 | Conference Paper | LibreCat-ID: 43462
M. Böhnke et al., “A calibration method for failure modeling in clinching process simulations,” 2023, doi: 10.21741/9781644902417-34.
LibreCat | DOI
 
[46]
2023 | Book Chapter | LibreCat-ID: 52454
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates,” in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland, 2023.
LibreCat | DOI
 
[45]
2023 | Conference Paper | LibreCat-ID: 43463
J. Friedlein et al., “Influence of plastic orthotropy on clinching of sheet metal,” 2023, doi: 10.21741/9781644902417-17 .
LibreCat | DOI
 
[44]
2023 | Book Chapter | LibreCat-ID: 52614
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain,” in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland, 2023.
LibreCat | DOI
 
[43]
2022 | Journal Article | LibreCat-ID: 34213
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[42]
2022 | Journal Article | LibreCat-ID: 32413
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints,” Key Engineering Materials, vol. 926, pp. 1516–1526, 2022, doi: 10.4028/p-5d009y.
LibreCat | DOI
 
[41]
2022 | Journal Article | LibreCat-ID: 36332 | OA
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[40]
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat | DOI
 
[39]
2022 | Journal Article | LibreCat-ID: 33002
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,” Key Engineering Materials, vol. 926, pp. 1564–1572, 2022, doi: 10.4028/p-wpuzyw.
LibreCat | DOI
 
[38]
2022 | Book Chapter | LibreCat-ID: 33003
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[37]
2022 | Journal Article | LibreCat-ID: 34572
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022, doi: 10.1177/14644207221145886.
LibreCat | DOI
 
[36]
2022 | Journal Article | LibreCat-ID: 34216
G. Meschut et al., “Review on mechanical joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi: 10.1016/j.jajp.2022.100113.
LibreCat | DOI
 
[35]
2022 | Journal Article | LibreCat-ID: 34241
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, and G. Meschut, “Joining of multi-material structures using a versatile self-piercing riveting process,” Production Engineering, 2022, doi: 10.1007/s11740-022-01151-w.
LibreCat | DOI
 
[34]
2022 | Journal Article | LibreCat-ID: 30100
C. Zirngibl et al., “Provision of cross-domain knowledge in mechanical joining using ontologies,” Production Engineering, 2022, doi: 10.1007/s11740-022-01117-y.
LibreCat | DOI
 
[33]
2022 | Book Chapter | LibreCat-ID: 34275
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, and G. Meschut, “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting,” in Materials Design and Applications IV, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[32]
2022 | Journal Article | LibreCat-ID: 29858
F. Kappe, L. Schadow, M. Bobbert, and G. Meschut, “Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design,” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi: 10.1177/14644207211070992.
LibreCat | DOI
 
[31]
2022 | Journal Article | LibreCat-ID: 29857
F. Kappe, S. Wituschek, M. Bobbert, and G. Meschut, “Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints,” Production Engineering, 2022, doi: https://doi.org/10.1007/s11740-022-01105-2.
LibreCat | DOI
 
[30]
2022 | Book Chapter | LibreCat-ID: 34210
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[29]
2022 | Journal Article | LibreCat-ID: 30962
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210934, 2022, doi: 10.1177/14644207221093468.
LibreCat | DOI
 
[28]
2022 | Journal Article | LibreCat-ID: 30963
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[27]
2022 | Journal Article | LibreCat-ID: 34068
B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,” Journal of Advanced Joining Processes, Art. no. 100134, 2022, doi: 10.1016/j.jajp.2022.100134.
LibreCat | DOI
 
[26]
2022 | Journal Article | LibreCat-ID: 29951 | OA
S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,” Production Engineering, 2022, doi: 10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[25]
2021 | Book | LibreCat-ID: 21800
S. Sander, M. Bobbert, and G. Meschut, Intrinsische  Hybridverbunde für  Leichtbautragstrukturen. Springer Vieweg, 2021.
LibreCat
 
[24]
2021 | Conference Paper | LibreCat-ID: 20807 | OA
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains,” presented at the ESAFORM 2021, Lüttich, doi: 10.25518/esaform21.4298.
LibreCat | DOI | Download (ext.)
 
[23]
2021 | Conference Paper | LibreCat-ID: 21811
M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,” in Sheet Metal 2021, 2021, vol. 883, pp. 81–88, doi: 10.4028/www.scientific.net/KEM.883.81.
LibreCat | DOI
 
[22]
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[21]
2021 | Journal Article | LibreCat-ID: 25556 | OA
M. Böhnke, M. S. Rossel, C. R. Bielak, M. Bobbert, and G. Meschut, “Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes,” The International Journal of Advanced Manufacturing Technology, 2021, doi: 10.1007/s00170-021-07986-4.
LibreCat | DOI | Download (ext.)
 
[20]
2021 | Journal Article | LibreCat-ID: 34227
M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,” Key Engineering Materials, vol. 883, pp. 81–88, 2021, doi: 10.4028/www.scientific.net/kem.883.81.
LibreCat | DOI
 
[19]
2021 | Conference Paper | LibreCat-ID: 34222
F. Kappe, C. R. Bielak, V. Sartisson, M. Bobbert, and G. Meschut, “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters,” 2021, doi: 10.25518/esaform21.4277.
LibreCat | DOI
 
[18]
2021 | Journal Article | LibreCat-ID: 22798
M. Böhnke, F. Kappe, M. Bobbert, and G. Meschut, “Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes,” Materials Testing, vol. 63, no. 6, pp. 493–500, 2021, doi: 10.1515/mt-2020-0082.
LibreCat | DOI
 
[17]
2021 | Journal Article | LibreCat-ID: 34226
F. Kappe, M. Bobbert, and G. Meschut, “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part,” Key Engineering Materials, vol. 883, pp. 3–10, 2021, doi: 10.4028/www.scientific.net/kem.883.3.
LibreCat | DOI
 
[16]
2021 | Book Chapter | LibreCat-ID: 29086
W.-G. Drossel et al., “Hybridprofile für Trag- und Crashstrukturen,” in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
LibreCat | DOI
 
[15]
2020 | Journal Article | LibreCat-ID: 20678
C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,” Journal of Advanced Joining Processes. , 2020, doi: https://doi.org/10.1016/j.jajp.2020.100038.
LibreCat | DOI
 
[14]
2020 | Conference Abstract | LibreCat-ID: 20344 | OA
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a numerical method for analyzing the robustness of clinching in versatile process chains,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt.
LibreCat | Files available
 
[13]
2020 | Conference Paper | LibreCat-ID: 20680
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, and M. Merklein, “Investigation of influencing parameters on the joint formation of the self-piercing riveting process,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt , 2020.
LibreCat
 
[12]
2019 | Book | LibreCat-ID: 20677
M. Bobbert, Untersuchungen zu kontinuums- und bruchmechanischen Methoden für die Prognose des Crashverhaltens toleranzbehafteter Strukturklebverbindungen. 2019.
LibreCat
 
[11]
2018 | Journal Article | LibreCat-ID: 15958
C. Zinn et al., “Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids,” Composites Part B: Engineering, pp. 173–185, 2018, doi: 10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 24557
R. Kießling et al., “On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces,” Applied Composite Materials, pp. 251–269, 2016, doi: 10.1007/s10443-016-9526-z.
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 42893 | OA
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, and A. Matzenmiller, “Tolerance Analysis of Adhesive Bonds in Crash Simulation,” Procedia CIRP, vol. 43, pp. 321–326, 2016, doi: 10.1016/j.procir.2016.02.151.
LibreCat | DOI | Download (ext.)
 
[8]
2016 | Journal Article | LibreCat-ID: 15963
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, vol. 2, pp. 272–298, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 16265
C. Zinn et al., “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” presented at the EuroHybrid, Kaiserslautern, 2016.
LibreCat
 
[6]
2016 | Journal Article | LibreCat-ID: 16141
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, Art. no. 272, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[5]
2016 | Journal Article | LibreCat-ID: 19391
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, and A. Matzenmiller, “Tolerance Analysis of Adhesive Bonds in Crash Simulation,” Procedia CIRP, pp. 321–326, 2016, doi: 10.1016/j.procir.2016.02.151.
LibreCat | DOI
 
[4]
2016 | Conference Paper | LibreCat-ID: 16138
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” presented at the Faszination hybrider Leichtbau 2016, Wolfsburg, 2016.
LibreCat
 
[3]
2016 | Journal Article | LibreCat-ID: 16140
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, and G. Meschut, “Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications,” Journal of Materials Science Research, Art. no. 15, 2016, doi: 10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[2]
2015 | Conference Paper | LibreCat-ID: 16262
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” presented at the Hybrid-Expo, Stuttgart, 2015.
LibreCat
 
[1]
2013 | Journal Article | LibreCat-ID: 19396
G. Kruschinski, A. Matzenmiller, M. Bobbert, D. Teutenberg, and G. Meschut, “Simulation und Bewertung von Fertigungstoleranzen,” adhäsion KLEBEN & DICHTEN, pp. 38–43, 2013.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

59 Publications

Mark all

[59]
2025 | Journal Article | LibreCat-ID: 58495
P. K. Holtkamp, F. Kappe, P. Probst, M. Bobbert, and G. Meschut, “Investigation of local heat treatment strategies for a multi-range capable rivet and the influence on joint formation and load-bearing capacity,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2025, doi: 10.1177/14644207241307508.
LibreCat | DOI
 
[58]
2025 | Journal Article | LibreCat-ID: 59872 | OA
M. Neuser, M. C. Schlichter, K.-P. Hoyer, M. Bobbert, G. Meschut, and M. Schaper, “Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys,” 44th Conference of the International Deep Drawing Research Group (IDDRG 2025), vol. 408, Art. no. 01081, 2025, doi: 10.1051/matecconf/202540801081.
LibreCat | DOI | Download (ext.)
 
[57]
2025 | Conference Paper | LibreCat-ID: 59878
M. C. Schlichter et al., “Experimental and numerical investigation of the influence of rolling-induced sheet metal deformation on SPR joints,” in Materials Research Proceedings, 2025, vol. 54, doi: 10.21741/9781644903599-148.
LibreCat | DOI
 
[56]
2025 | Conference Paper | LibreCat-ID: 59587
C. Chen et al., “High-cycle fatigue testing and parameter identification for numerical simulation of aluminum alloy EN AW-6014,” in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-23.
LibreCat | DOI
 
[55]
2025 | Conference Paper | LibreCat-ID: 60002
Ö. Harabati et al., “Cross-process damage modeling: A process-chain case study of clinching and self-pierced riveting for aluminum connections,” in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-19.
LibreCat | DOI
 
[54]
2025 | Journal Article | LibreCat-ID: 58807
M. Neuser et al., “Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12,” The Journal of Materials: Design and Applications, Part L, 2025, doi: 10.1177/14644207251319922.
LibreCat | DOI
 
[53]
2025 | Journal Article | LibreCat-ID: 59584
J. Friedlein et al., “Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations,” Journal of Advanced Joining Processes, vol. 11, Art. no. 100299, 2025, doi: 10.1016/j.jajp.2025.100299.
LibreCat | DOI
 
[52]
2025 | Conference Paper | LibreCat-ID: 60290
S. Lüder et al., “Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting,” in Materials Research Proceedings, Paderborn, 2025, vol. 52, pp. 101–108, doi: 10.21741/9781644903551-13.
LibreCat | DOI
 
[51]
2025 | Conference Paper | LibreCat-ID: 60440
P. K. Holtkamp, C. R. Bielak, M. Bobbert, and G. Meschut, “Simulation of the joining process of graded hardened multi-range capable rivets,” in Materials Research Proceedings, 2025, vol. 54, doi: 10.21741/9781644903599-153.
LibreCat | DOI
 
[50]
2024 | Journal Article | LibreCat-ID: 57742
M. Böhnke, C. R. Bielak, R. Beck, M. Bobbert, and G. Meschut, “Development of a friction model for the numerical simulation of clinching processes,” Friction, 2024, doi: 10.26599/frict.2025.9441052.
LibreCat | DOI
 
[49]
2024 | Journal Article | LibreCat-ID: 59585
J. Friedlein et al., “Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining,” Journal of Manufacturing and Materials Processing, vol. 8, no. 4, Art. no. 157, 2024, doi: 10.3390/jmmp8040157.
LibreCat | DOI
 
[48]
2023 | Conference Paper | LibreCat-ID: 43090
C. R. Bielak et al., “Numerical analysis of failure modeling in clinching process chain simulation,” presented at the SHEMET 2023, 2023, doi: 10.21741/9781644902417-33.
LibreCat | DOI
 
[47]
2023 | Conference Paper | LibreCat-ID: 43462
M. Böhnke et al., “A calibration method for failure modeling in clinching process simulations,” 2023, doi: 10.21741/9781644902417-34.
LibreCat | DOI
 
[46]
2023 | Book Chapter | LibreCat-ID: 52454
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates,” in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland, 2023.
LibreCat | DOI
 
[45]
2023 | Conference Paper | LibreCat-ID: 43463
J. Friedlein et al., “Influence of plastic orthotropy on clinching of sheet metal,” 2023, doi: 10.21741/9781644902417-17 .
LibreCat | DOI
 
[44]
2023 | Book Chapter | LibreCat-ID: 52614
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain,” in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland, 2023.
LibreCat | DOI
 
[43]
2022 | Journal Article | LibreCat-ID: 34213
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[42]
2022 | Journal Article | LibreCat-ID: 32413
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints,” Key Engineering Materials, vol. 926, pp. 1516–1526, 2022, doi: 10.4028/p-5d009y.
LibreCat | DOI
 
[41]
2022 | Journal Article | LibreCat-ID: 36332 | OA
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[40]
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat | DOI
 
[39]
2022 | Journal Article | LibreCat-ID: 33002
M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,” Key Engineering Materials, vol. 926, pp. 1564–1572, 2022, doi: 10.4028/p-wpuzyw.
LibreCat | DOI
 
[38]
2022 | Book Chapter | LibreCat-ID: 33003
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[37]
2022 | Journal Article | LibreCat-ID: 34572
M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022, doi: 10.1177/14644207221145886.
LibreCat | DOI
 
[36]
2022 | Journal Article | LibreCat-ID: 34216
G. Meschut et al., “Review on mechanical joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi: 10.1016/j.jajp.2022.100113.
LibreCat | DOI
 
[35]
2022 | Journal Article | LibreCat-ID: 34241
F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, and G. Meschut, “Joining of multi-material structures using a versatile self-piercing riveting process,” Production Engineering, 2022, doi: 10.1007/s11740-022-01151-w.
LibreCat | DOI
 
[34]
2022 | Journal Article | LibreCat-ID: 30100
C. Zirngibl et al., “Provision of cross-domain knowledge in mechanical joining using ontologies,” Production Engineering, 2022, doi: 10.1007/s11740-022-01117-y.
LibreCat | DOI
 
[33]
2022 | Book Chapter | LibreCat-ID: 34275
F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, and G. Meschut, “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting,” in Materials Design and Applications IV, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[32]
2022 | Journal Article | LibreCat-ID: 29858
F. Kappe, L. Schadow, M. Bobbert, and G. Meschut, “Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design,” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi: 10.1177/14644207211070992.
LibreCat | DOI
 
[31]
2022 | Journal Article | LibreCat-ID: 29857
F. Kappe, S. Wituschek, M. Bobbert, and G. Meschut, “Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints,” Production Engineering, 2022, doi: https://doi.org/10.1007/s11740-022-01105-2.
LibreCat | DOI
 
[30]
2022 | Book Chapter | LibreCat-ID: 34210
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[29]
2022 | Journal Article | LibreCat-ID: 30962
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical investigation of a friction  test to determine the friction  coefficients for the clinching process,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210934, 2022, doi: 10.1177/14644207221093468.
LibreCat | DOI
 
[28]
2022 | Journal Article | LibreCat-ID: 30963
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat | DOI
 
[27]
2022 | Journal Article | LibreCat-ID: 34068
B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,” Journal of Advanced Joining Processes, Art. no. 100134, 2022, doi: 10.1016/j.jajp.2022.100134.
LibreCat | DOI
 
[26]
2022 | Journal Article | LibreCat-ID: 29951 | OA
S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,” Production Engineering, 2022, doi: 10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[25]
2021 | Book | LibreCat-ID: 21800
S. Sander, M. Bobbert, and G. Meschut, Intrinsische  Hybridverbunde für  Leichtbautragstrukturen. Springer Vieweg, 2021.
LibreCat
 
[24]
2021 | Conference Paper | LibreCat-ID: 20807 | OA
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains,” presented at the ESAFORM 2021, Lüttich, doi: 10.25518/esaform21.4298.
LibreCat | DOI | Download (ext.)
 
[23]
2021 | Conference Paper | LibreCat-ID: 21811
M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,” in Sheet Metal 2021, 2021, vol. 883, pp. 81–88, doi: 10.4028/www.scientific.net/KEM.883.81.
LibreCat | DOI
 
[22]
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[21]
2021 | Journal Article | LibreCat-ID: 25556 | OA
M. Böhnke, M. S. Rossel, C. R. Bielak, M. Bobbert, and G. Meschut, “Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes,” The International Journal of Advanced Manufacturing Technology, 2021, doi: 10.1007/s00170-021-07986-4.
LibreCat | DOI | Download (ext.)
 
[20]
2021 | Journal Article | LibreCat-ID: 34227
M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,” Key Engineering Materials, vol. 883, pp. 81–88, 2021, doi: 10.4028/www.scientific.net/kem.883.81.
LibreCat | DOI
 
[19]
2021 | Conference Paper | LibreCat-ID: 34222
F. Kappe, C. R. Bielak, V. Sartisson, M. Bobbert, and G. Meschut, “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters,” 2021, doi: 10.25518/esaform21.4277.
LibreCat | DOI
 
[18]
2021 | Journal Article | LibreCat-ID: 22798
M. Böhnke, F. Kappe, M. Bobbert, and G. Meschut, “Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes,” Materials Testing, vol. 63, no. 6, pp. 493–500, 2021, doi: 10.1515/mt-2020-0082.
LibreCat | DOI
 
[17]
2021 | Journal Article | LibreCat-ID: 34226
F. Kappe, M. Bobbert, and G. Meschut, “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part,” Key Engineering Materials, vol. 883, pp. 3–10, 2021, doi: 10.4028/www.scientific.net/kem.883.3.
LibreCat | DOI
 
[16]
2021 | Book Chapter | LibreCat-ID: 29086
W.-G. Drossel et al., “Hybridprofile für Trag- und Crashstrukturen,” in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
LibreCat | DOI
 
[15]
2020 | Journal Article | LibreCat-ID: 20678
C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,” Journal of Advanced Joining Processes. , 2020, doi: https://doi.org/10.1016/j.jajp.2020.100038.
LibreCat | DOI
 
[14]
2020 | Conference Abstract | LibreCat-ID: 20344 | OA
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a numerical method for analyzing the robustness of clinching in versatile process chains,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt.
LibreCat | Files available
 
[13]
2020 | Conference Paper | LibreCat-ID: 20680
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, and M. Merklein, “Investigation of influencing parameters on the joint formation of the self-piercing riveting process,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt , 2020.
LibreCat
 
[12]
2019 | Book | LibreCat-ID: 20677
M. Bobbert, Untersuchungen zu kontinuums- und bruchmechanischen Methoden für die Prognose des Crashverhaltens toleranzbehafteter Strukturklebverbindungen. 2019.
LibreCat
 
[11]
2018 | Journal Article | LibreCat-ID: 15958
C. Zinn et al., “Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids,” Composites Part B: Engineering, pp. 173–185, 2018, doi: 10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 24557
R. Kießling et al., “On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces,” Applied Composite Materials, pp. 251–269, 2016, doi: 10.1007/s10443-016-9526-z.
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 42893 | OA
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, and A. Matzenmiller, “Tolerance Analysis of Adhesive Bonds in Crash Simulation,” Procedia CIRP, vol. 43, pp. 321–326, 2016, doi: 10.1016/j.procir.2016.02.151.
LibreCat | DOI | Download (ext.)
 
[8]
2016 | Journal Article | LibreCat-ID: 15963
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, vol. 2, pp. 272–298, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[7]
2016 | Conference Paper | LibreCat-ID: 16265
C. Zinn et al., “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” presented at the EuroHybrid, Kaiserslautern, 2016.
LibreCat
 
[6]
2016 | Journal Article | LibreCat-ID: 16141
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, Art. no. 272, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[5]
2016 | Journal Article | LibreCat-ID: 19391
G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, and A. Matzenmiller, “Tolerance Analysis of Adhesive Bonds in Crash Simulation,” Procedia CIRP, pp. 321–326, 2016, doi: 10.1016/j.procir.2016.02.151.
LibreCat | DOI
 
[4]
2016 | Conference Paper | LibreCat-ID: 16138
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” presented at the Faszination hybrider Leichtbau 2016, Wolfsburg, 2016.
LibreCat
 
[3]
2016 | Journal Article | LibreCat-ID: 16140
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, and G. Meschut, “Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications,” Journal of Materials Science Research, Art. no. 15, 2016, doi: 10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[2]
2015 | Conference Paper | LibreCat-ID: 16262
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” presented at the Hybrid-Expo, Stuttgart, 2015.
LibreCat
 
[1]
2013 | Journal Article | LibreCat-ID: 19396
G. Kruschinski, A. Matzenmiller, M. Bobbert, D. Teutenberg, and G. Meschut, “Simulation und Bewertung von Fertigungstoleranzen,” adhäsion KLEBEN & DICHTEN, pp. 38–43, 2013.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed