Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
300 Publications
1778 | Book | LibreCat-ID: 22111
Beeinflussung des Risswachstums durch Kerben in additiv gefertigten Strukturen
W. Reschetnik, J.P. Brüggemann, G. Kullmer, L. Risse, Beeinflussung Des Risswachstums Durch Kerben in Additiv Gefertigten Strukturen, n.d.
LibreCat
W. Reschetnik, J.P. Brüggemann, G. Kullmer, L. Risse, Beeinflussung Des Risswachstums Durch Kerben in Additiv Gefertigten Strukturen, n.d.
1778 | Book | LibreCat-ID: 22114
Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe
A. Riemer, S. Leuders, H.A. Richard, G. Kullmer, Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe, n.d.
LibreCat
A. Riemer, S. Leuders, H.A. Richard, G. Kullmer, Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe, n.d.
2010 | Conference Paper | LibreCat-ID: 22050
FDM Part Quality Manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference Polymeric Materials, 2010.
LibreCat
| DOI
A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference Polymeric Materials, 2010.
2010 | Journal Article | LibreCat-ID: 22355
Konstruktionsregeln für additive Fertigung in Lehre und Forschung
G. Adam, D. Zimmer, Newsletter Berliner Kreis 15 (2010) 22–23.
LibreCat
| DOI
G. Adam, D. Zimmer, Newsletter Berliner Kreis 15 (2010) 22–23.
2011 | Book | LibreCat-ID: 22191
Porosity as a key to increase material properties of laser sintered parts
S. Rüsenberg, L. Schmidt, H. Hosse, H.-J. Schmid, Porosity as a Key to Increase Material Properties of Laser Sintered Parts, 2011.
LibreCat
| DOI
S. Rüsenberg, L. Schmidt, H. Hosse, H.-J. Schmid, Porosity as a Key to Increase Material Properties of Laser Sintered Parts, 2011.
2011 | Book | LibreCat-ID: 22358
Direct Manufacturing Design Rules
G. Adam, D. Zimmer, Direct Manufacturing Design Rules, CRC Press, 2011.
LibreCat
| DOI
G. Adam, D. Zimmer, Direct Manufacturing Design Rules, CRC Press, 2011.
2011 | Conference Paper | LibreCat-ID: 22188
Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts
S. Rüsenberg, L. Schmidt, H.-J. Schmid, in: 22th Annual International Solid Freeform Fabrication Symposium, 2011, pp. 239–251.
LibreCat
| DOI
S. Rüsenberg, L. Schmidt, H.-J. Schmid, in: 22th Annual International Solid Freeform Fabrication Symposium, 2011, pp. 239–251.
2011 | Conference Paper | LibreCat-ID: 22360
DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen Konstruktionsregeln
D. Zimmer, G. Adam, in: Rapid.Tech 2011 Fachmesse Und Anwendertagung Für Rapid-Technologie, 2011.
LibreCat
D. Zimmer, G. Adam, in: Rapid.Tech 2011 Fachmesse Und Anwendertagung Für Rapid-Technologie, 2011.
2011 | Conference Paper | LibreCat-ID: 22029
Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.
LibreCat
| DOI
A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.
2012 | Conference Paper | LibreCat-ID: 22174
Controlling the Quality of Laser Sintered Parts Along the Process Chain
S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.
LibreCat
| DOI
S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.
2012 | Conference Paper | LibreCat-ID: 22204
Mechanical Properties as a Result of multitude of Parameters
S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing, 2012.
LibreCat
| DOI
S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing, 2012.
2012 | Conference Paper | LibreCat-ID: 22364
Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung
G. Adam, D. Zimmer, in: 2012.
LibreCat
G. Adam, D. Zimmer, in: 2012.
2012 | Conference Paper | LibreCat-ID: 21680
Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing
C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 177–188.
LibreCat
| DOI
C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 177–188.
2012 | Conference Paper | LibreCat-ID: 22016
Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 629–640.
LibreCat
| DOI
A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform Fabrication Symposium, 2012, pp. 629–640.
2012 | Conference Paper | LibreCat-ID: 22164
Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085
A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically Graded Materials, 2012, pp. 129–134.
LibreCat
A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically Graded Materials, 2012, pp. 129–134.
2012 | Conference Paper | LibreCat-ID: 22024
Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085
A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer and Mould Innovations, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., Ghent, 2012, pp. 266–272.
LibreCat
| DOI
A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer and Mould Innovations, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., Ghent, 2012, pp. 266–272.
2013 | Conference Paper | LibreCat-ID: 22175
A material-based quality concept for polymer laser sintering
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: 24th Annual International Solid Freeform Fabrication Symposium , 2013, pp. 44–54.
LibreCat
| DOI
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: 24th Annual International Solid Freeform Fabrication Symposium , 2013, pp. 44–54.
2013 | Conference Paper | LibreCat-ID: 22192
Advanced characterization method of Nylon 12 materials for application in laser sinter processing
S. Rüsenberg, H.-J. Schmid, in: International Conference of the Polymer-Processing-Society (PPS), 2013.
LibreCat
| DOI
S. Rüsenberg, H.-J. Schmid, in: International Conference of the Polymer-Processing-Society (PPS), 2013.
2013 | Conference Paper | LibreCat-ID: 22197
Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: Merseburger Rapid Prototyping Forum, 2013.
LibreCat
| DOI
S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: Merseburger Rapid Prototyping Forum, 2013.
2013 | Conference Paper | LibreCat-ID: 22201
Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie
S. Rüsenberg, A. Bagsik, J. Büsching, H.-J. Schmid, in: RapidTech, 2013.
LibreCat
S. Rüsenberg, A. Bagsik, J. Büsching, H.-J. Schmid, in: RapidTech, 2013.
2013 | Conference Paper | LibreCat-ID: 22373
Design for additive manufacturing
G. Adam, D. Zimmer, in: 2013.
LibreCat
G. Adam, D. Zimmer, in: 2013.
2013 | Conference Paper | LibreCat-ID: 22375
Die Potentiale additiver Fertigung nutzen
G. Adam, in: 2013.
LibreCat
G. Adam, in: 2013.
2013 | Conference Paper | LibreCat-ID: 22376
Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre
G. Adam, in: 2013.
LibreCat
G. Adam, in: 2013.
2013 | Conference Paper | LibreCat-ID: 21682
Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs
C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 998–1008.
LibreCat
| DOI
C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 998–1008.
2013 | Conference Paper | LibreCat-ID: 22017
Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling
M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 805–815.
LibreCat
| DOI
M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication Symposium, 2013, pp. 805–815.
2013 | Dissertation | LibreCat-ID: 42097
Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung von Führungsprozessen durch interaktive SOPs
T. Becker, Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung von Führungsprozessen Durch Interaktive SOPs , 2013.
LibreCat
| Download (ext.)
T. Becker, Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung von Führungsprozessen Durch Interaktive SOPs , 2013.
2013 | Journal Article | LibreCat-ID: 22374
Konstruktionsregeln für additive Fertigungsverfahren
G. Adam, D. Zimmer, Konstruktion 7 (2013) 77–82.
LibreCat
| DOI
G. Adam, D. Zimmer, Konstruktion 7 (2013) 77–82.
2014 | Conference Paper | LibreCat-ID: 22176
Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
LibreCat
| DOI
P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
2014 | Conference Paper | LibreCat-ID: 22177
Three-dimensional in-process temperature measurement of laser sintered part cakes
S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 49–58.
LibreCat
| DOI
S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 49–58.
2014 | Conference Paper | LibreCat-ID: 22184
Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, pp. 2383–2385.
LibreCat
| DOI
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, pp. 2383–2385.
2014 | Conference Paper | LibreCat-ID: 22193
Development of a Basic Model to Simulate the Laser Sintering Cooling Process
S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive Technologies, 2014, pp. 222–227.
LibreCat
| DOI
S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive Technologies, 2014, pp. 222–227.
2014 | Conference Paper | LibreCat-ID: 22203
Simulation of the Surface Topography on Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
LibreCat
| DOI
P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.
2014 | Conference Paper | LibreCat-ID: 22382
Extension of prior developed design rules (LS)
G. Adam, D. Zimmer, in: ASPE - Spring Topical Meeting 2014, 2014.
LibreCat
| DOI
G. Adam, D. Zimmer, in: ASPE - Spring Topical Meeting 2014, 2014.
2014 | Conference Paper | LibreCat-ID: 22383
Systematic investigations of minimum feature sizes and geometrical accuracies
G. Adam, D. Zimmer, in: 2014.
LibreCat
G. Adam, D. Zimmer, in: 2014.
2014 | Conference Paper | LibreCat-ID: 22385
LibreCat
2014 | Conference Paper | LibreCat-ID: 22386
Extension of prior developed design rules for laser sintering
G. Adam, in: 2014.
LibreCat
G. Adam, in: 2014.
2014 | Conference Paper | LibreCat-ID: 22018
Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy
M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 923–934.
LibreCat
| DOI
M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication Symposium, 2014, pp. 923–934.
2014 | Conference Paper | LibreCat-ID: 22030
Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling
M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–2336.
LibreCat
M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–2336.
2014 | Conference Paper | LibreCat-ID: 22021
Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling
A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.
LibreCat
| DOI
A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.
2014 | Journal Article | LibreCat-ID: 22186
A method to characterize the quality of a polymer laser sintering process
S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering 6 (2014) 1687–8140.
LibreCat
| DOI
S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering 6 (2014) 1687–8140.
2014 | Journal Article | LibreCat-ID: 22384
Design for Additive Manufacturing - Element transitions and aggregated structures
G. Adam, D. Zimmer, CIRP Journal of Manufacturing Science and Technology 7 (2014) 20–28.
LibreCat
| DOI
G. Adam, D. Zimmer, CIRP Journal of Manufacturing Science and Technology 7 (2014) 20–28.
2014 | Journal Article | LibreCat-ID: 21706
Exploring the influence of an Additive Manufacturing integration on future MRO processes in aeronautics
G. Deppe, R. Koch, Rtejournal 2014 (2014).
LibreCat
| DOI
G. Deppe, R. Koch, Rtejournal 2014 (2014).
2014 | Journal Article | LibreCat-ID: 15965
On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials Research (2014) 1911–1919.
LibreCat
| DOI
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials Research (2014) 1911–1919.
2015 | Conference Paper | LibreCat-ID: 22108
Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen
W. Reschetnik, A. Riemer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.
LibreCat
W. Reschetnik, A. Riemer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.
2015 | Conference Paper | LibreCat-ID: 22166
Industrial applications in AM - aerospace and overhaul
E. Klemp, in: ASME AM3D Conference and Expo, 2015.
LibreCat
E. Klemp, in: ASME AM3D Conference and Expo, 2015.
2015 | Conference Paper | LibreCat-ID: 22168
Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen
E. Klemp, in: Generatives Fertigen Und 3D-Drucken: Industrielle Revolution Oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat
E. Klemp, in: Generatives Fertigen Und 3D-Drucken: Industrielle Revolution Oder Hype? Wissenschaftliches Kolloquium, 2015.
2015 | Conference Paper | LibreCat-ID: 22169
Möglichkeiten, Chancen und Mythen additiver Fertigung
E. Klemp, in: Hanse-Aerospace-Themennachmittag Im Hause SLM, 2015.
LibreCat
E. Klemp, in: Hanse-Aerospace-Themennachmittag Im Hause SLM, 2015.
2015 | Conference Paper | LibreCat-ID: 22170
Additive Manufacturing - Potenziale, Zukunftschancen und Hürden
E. Klemp, in: Messe Interzum, 2015.
LibreCat
E. Klemp, in: Messe Interzum, 2015.
2015 | Conference Paper | LibreCat-ID: 22171
Technology Update 2015 for Metals
E. Klemp, in: SLM-Usermeeting, 2015.
LibreCat
E. Klemp, in: SLM-Usermeeting, 2015.
2015 | Conference Paper | LibreCat-ID: 22172
AM-Verfahren - Möglichkeiten in der industriellen Fertigung
E. Klemp, in: VDMA - Symposium Auf Der Hannover Messe Industrie, 2015.
LibreCat
E. Klemp, in: VDMA - Symposium Auf Der Hannover Messe Industrie, 2015.
2015 | Conference Paper | LibreCat-ID: 22178
Mass finishing of laser sintered parts
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.
LibreCat
| DOI
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.
2015 | Conference Paper | LibreCat-ID: 22179
Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.
LibreCat
| DOI
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.
2015 | Conference Paper | LibreCat-ID: 22187
Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.
LibreCat
| DOI
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.
2015 | Conference Paper | LibreCat-ID: 22189
Surface roughness optimized alignment of parts for additive manufacturing processes
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.
LibreCat
| DOI
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.
2015 | Conference Paper | LibreCat-ID: 22199
Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.
LibreCat
| DOI
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.
2015 | Conference Paper | LibreCat-ID: 22395
Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren
T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: Proceedings of the Rapid Tech 2015, 2015.
LibreCat
T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: Proceedings of the Rapid Tech 2015, 2015.
2015 | Conference Paper | LibreCat-ID: 22396
Systematical determination of tolerances for additive manufacturing by measuring linear dimensions
T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 371–384.
LibreCat
| DOI
T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 371–384.
2015 | Conference Paper | LibreCat-ID: 22398
On tolerances for additive manufacturing
G. Adam, in: Inside 3D Printing Conference and Expo, 2015.
LibreCat
G. Adam, in: Inside 3D Printing Conference and Expo, 2015.
2015 | Conference Paper | LibreCat-ID: 22399
Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren
T. Lieneke, in: Rapid Tech 2015, 2015.
LibreCat
T. Lieneke, in: Rapid Tech 2015, 2015.
2015 | Conference Paper | LibreCat-ID: 22400
Systematical determination of dimensional tolerances for additive manufacturing
T. Lieneke, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015.
LibreCat
T. Lieneke, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015.
2015 | Conference Paper | LibreCat-ID: 21683
Towards a sustainable and economic selection of part candidates for Additive Manufacturing
C. Lindemann, U. Jahnke, T. Reiher, R. Koch, in: Rapid Prototyping Journal, Emerald, 2015, pp. 216–227.
LibreCat
| DOI
C. Lindemann, U. Jahnke, T. Reiher, R. Koch, in: Rapid Prototyping Journal, Emerald, 2015, pp. 216–227.
2015 | Conference Paper | LibreCat-ID: 21684
Developement of an economic decision support for the application of Additive Manufacturing in aerospace
G. Deppe, C. Lindemann, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1560–1563.
LibreCat
| DOI
G. Deppe, C. Lindemann, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1560–1563.
2015 | Conference Paper | LibreCat-ID: 21685
Protection measures against product piracy and application by the use of AM
U. Jahnke, J. Büsching, T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1601–1611.
LibreCat
| DOI
U. Jahnke, J. Büsching, T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1601–1611.
2015 | Conference Paper | LibreCat-ID: 21686
FE-Optimization and data handling for Additive Manufacturing of structural parts
T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1092–1103.
LibreCat
| DOI
T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1092–1103.
2015 | Conference Paper | LibreCat-ID: 21700
Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy
U. Jahnke, C. Lindemann, in: Inside 3D Printing Conference and Expo, 2015.
LibreCat
U. Jahnke, C. Lindemann, in: Inside 3D Printing Conference and Expo, 2015.
2015 | Conference Paper | LibreCat-ID: 21701
Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing
G. Deppe, T. Reiher, R. Koch, in: International Conference Production Engineering and Management 2015, 2015, pp. 219–230.
LibreCat
| DOI
G. Deppe, T. Reiher, R. Koch, in: International Conference Production Engineering and Management 2015, 2015, pp. 219–230.
2015 | Conference Paper | LibreCat-ID: 21703
Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing
C. Lindemann, T. Reiher, R. Koch, in: Paris Space Week, 2015.
LibreCat
C. Lindemann, T. Reiher, R. Koch, in: Paris Space Week, 2015.
2015 | Conference Paper | LibreCat-ID: 22031
Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30
F. Knoop, V. Schöppner, in: ASPE Spring Topical Meeting, 2015, pp. 26–31.
LibreCat
| DOI
F. Knoop, V. Schöppner, in: ASPE Spring Topical Meeting, 2015, pp. 26–31.
2015 | Conference Paper | LibreCat-ID: 22044
Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12
F. Knoop, V. Schöppner, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 935–948.
LibreCat
| DOI
F. Knoop, V. Schöppner, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 935–948.
2015 | Dissertation | LibreCat-ID: 24751
Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren
S. Rüsenberg, Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, Shaker Verlag GmbH, Düren, 2015.
LibreCat
| Download (ext.)
S. Rüsenberg, Prozessqualifizierung zur verlässlichen Herstellung von Produkten im Polymer Lasersinterverfahren, Shaker Verlag GmbH, Düren, 2015.
2015 | Dissertation | LibreCat-ID: 22397
Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling
G. Adam, Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling, Shaker Verlag, 2015.
LibreCat
G. Adam, Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling, Shaker Verlag, 2015.
2015 | Journal Article | LibreCat-ID: 22394
On design for Additive Manufacturing - evaluating geometrical limitations
G. dell’Aere, D. Zimmer, Rapid Prototyping Journal 21 (2015) 662–670.
LibreCat
| DOI
G. dell’Aere, D. Zimmer, Rapid Prototyping Journal 21 (2015) 662–670.
2016 | Book | LibreCat-ID: 21698
Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market
C. Lindemann, G. Deppe, R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market, Metropolis Verlag, 2016.
LibreCat
C. Lindemann, G. Deppe, R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market, Metropolis Verlag, 2016.
2016 | Book | LibreCat-ID: 21699
Prevention of Product Piracy - Potentials of Additive Manufacturing
U. Jahnke, R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing, Metropolis Verlag, 2016.
LibreCat
U. Jahnke, R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing, Metropolis Verlag, 2016.
2016 | Conference Paper | LibreCat-ID: 22107
Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus
J.P. Brüggemann, W. Reschetnik, H.A. Richard, G. Kullmer, B. Schramm, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 290–300.
LibreCat
| DOI
J.P. Brüggemann, W. Reschetnik, H.A. Richard, G. Kullmer, B. Schramm, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 290–300.
2016 | Conference Paper | LibreCat-ID: 22109
Fatigue Life Manipulation of SLM Parts
W. Reschetnik, R. Grylls, B. Bauer, H.A. Richard, G. Kullmer, in: 2016.
LibreCat
W. Reschetnik, R. Grylls, B. Bauer, H.A. Richard, G. Kullmer, in: 2016.
2016 | Conference Paper | LibreCat-ID: 22128
Optimierung von Fahrradtretkurbeln mittels additiver Fertigung
J.P. Brüggemann, A. Riemer, W. Reschetnik, M.E. Aydinöz, G. Kullmer, H.A. Richard, M. Schaper, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–112.
LibreCat
J.P. Brüggemann, A. Riemer, W. Reschetnik, M.E. Aydinöz, G. Kullmer, H.A. Richard, M. Schaper, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–112.
2016 | Conference Paper | LibreCat-ID: 22130
Lebensdauerbeeinflussung durch Additive Fertigung
W. Reschetnik, J.P. Brüggemann, M.E. Aydinöz, G. Kullmer, H.A. Richard, M. Schaper, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–140.
LibreCat
W. Reschetnik, J.P. Brüggemann, M.E. Aydinöz, G. Kullmer, H.A. Richard, M. Schaper, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–140.
2016 | Conference Paper | LibreCat-ID: 22132
Materialkennwerte lasergeschmolzener Werkstoffe
A. Riemer, L. Leuders, G. Kullmer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–174.
LibreCat
A. Riemer, L. Leuders, G. Kullmer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–174.
2016 | Conference Paper | LibreCat-ID: 22146
Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy
W. Reschetnik, J.P. Brüggemann, M.E. Aydinöz, O. Grydin, K.P. Hoyer, G. Kullmer, H.A. Richard, in: Procedia Structural Integrity, 2016, pp. 3040–3048.
LibreCat
W. Reschetnik, J.P. Brüggemann, M.E. Aydinöz, O. Grydin, K.P. Hoyer, G. Kullmer, H.A. Richard, in: Procedia Structural Integrity, 2016, pp. 3040–3048.
2016 | Conference Paper | LibreCat-ID: 22149
Crack Propagation in Additive Manufactured Materials and Structures
A. Riemer, H.A. Richard, in: Procedia Structural Integrity, 2016, pp. 1229–1236.
LibreCat
A. Riemer, H.A. Richard, in: Procedia Structural Integrity, 2016, pp. 1229–1236.
2016 | Conference Paper | LibreCat-ID: 22180
Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.
LibreCat
| DOI
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.
2016 | Conference Paper | LibreCat-ID: 22190
Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.
LibreCat
| DOI
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.
2016 | Conference Paper | LibreCat-ID: 22194
Thermal properties of polyamide 12 powder for application in laser sintering
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.
2016 | Conference Paper | LibreCat-ID: 22200
Dimensional accuracy of polymer laser sintered parts: Influences and measures
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat
| DOI
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
2016 | Conference Paper | LibreCat-ID: 22403
Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen
T. Künneke, D. Zimmer, in: DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2016, pp. 151–160.
LibreCat
T. Künneke, D. Zimmer, in: DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2016, pp. 151–160.
2016 | Conference Paper | LibreCat-ID: 22404
Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine
S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016.
LibreCat
| DOI
S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016.
2016 | Conference Paper | LibreCat-ID: 22408
Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.
2016 | Conference Paper | LibreCat-ID: 22409
Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting
T. Lieneke, S. de Groot, G. Adam, D. Zimmer, in: ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
T. Lieneke, S. de Groot, G. Adam, D. Zimmer, in: ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
2016 | Conference Paper | LibreCat-ID: 22410
Reproducibility of the Dimensional Accuracy - Investigations for FDM
F. Knoop, T. Lieneke, V. Schoeppner, in: ASPE Spring Topical Meeting, 2016, p. S.3-8.
LibreCat
| DOI
F. Knoop, T. Lieneke, V. Schoeppner, in: ASPE Spring Topical Meeting, 2016, p. S.3-8.
2016 | Conference Paper | LibreCat-ID: 22411
Reproducibility of the Dimensional Accuracy - Investigations for FDM
F. Knoop, T. Lieneke, V. Schoeppner, in: Summer Topical Meeting 2016, 2016.
LibreCat
F. Knoop, T. Lieneke, V. Schoeppner, in: Summer Topical Meeting 2016, 2016.
2016 | Conference Paper | LibreCat-ID: 22412
Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling
T. Lieneke, V. Denzer, G. Adam, D. Zimmer, in: CAT 2016, 2016, pp. 286–291.
LibreCat
| DOI
T. Lieneke, V. Denzer, G. Adam, D. Zimmer, in: CAT 2016, 2016, pp. 286–291.
2016 | Conference Paper | LibreCat-ID: 21687
Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM
G. Deppe, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 81–92.
LibreCat
| DOI
G. Deppe, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 81–92.
2016 | Conference Paper | LibreCat-ID: 21688
Product optimization with and for Additive Manufacturing
T. Reiher, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2236–2249.
LibreCat
| DOI
T. Reiher, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2236–2249.
2016 | Conference Paper | LibreCat-ID: 21689
Cost Efficient Design and Planning for Additive Manufacturing Technologies
C. Lindemann, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 93–112.
LibreCat
| DOI
C. Lindemann, R. Koch, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 93–112.
2016 | Conference Paper | LibreCat-ID: 21702
Combining material efficiency and part reliability by product optimization applying additive manufacturing
T. Reiher, G. Deppe, R. Koch, in: International Conference Production Engineering and Management 2016, 2016, pp. 27–38.
LibreCat
| DOI
T. Reiher, G. Deppe, R. Koch, in: International Conference Production Engineering and Management 2016, 2016, pp. 27–38.
2016 | Conference Paper | LibreCat-ID: 21705
Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung
G. Deppe, R. Koch, in: Rapid Tech 2016, Hanser Verlag, 2016, pp. 349–360.
LibreCat
| DOI
G. Deppe, R. Koch, in: Rapid Tech 2016, Hanser Verlag, 2016, pp. 349–360.
2016 | Conference Paper | LibreCat-ID: 21997
Data Management for additive manufacturing: survey on requirements and current state
I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, T. Reiher, in: 14th International DESIGN Conference 2016, 2016.
LibreCat
| DOI
I. Gräßler, P. Taplick, J. Pottebaum, P. Scholle, T. Reiher, in: 14th International DESIGN Conference 2016, 2016.
2016 | Conference Paper | LibreCat-ID: 22019
Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.
LibreCat
| DOI
M. Fischer, V. Schöppner, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 563–568.
2016 | Conference Paper | LibreCat-ID: 22039
Chemical Surface Treatment of Ultem 9085 Parts
M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, 2016, pp. 121–133.
LibreCat
| DOI
M. Fischer, O. Seewald, V. Schöppner, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, 2016, pp. 121–133.