Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

253 Publications


1778 | Book | LibreCat-ID: 22111
W. Reschetnik, J. P. Brüggemann, G. Kullmer, and L. Risse, Beeinflussung des Risswachstums durch Kerben in additiv gefertigten Strukturen. .
LibreCat
 

1778 | Book | LibreCat-ID: 22114
A. Riemer, S. Leuders, H. A. Richard, and G. Kullmer, Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe. .
LibreCat
 

2010 | Journal Article | LibreCat-ID: 22355
G. Adam and D. Zimmer, “Konstruktionsregeln für additive Fertigung in Lehre und Forschung,” Newsletter Berliner Kreis, vol. 15, pp. 22–23, 2010.
LibreCat | DOI
 

2010 | Conference Paper | LibreCat-ID: 22050
A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with ULTEM 9085,” 2010, doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
LibreCat | DOI
 

2011 | Conference Paper | LibreCat-ID: 22188
S. Rüsenberg, L. Schmidt, and H.-J. Schmid, “Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts,” in 22th Annual International Solid Freeform Fabrication Symposium, 2011, vol. 22, pp. 239–251.
LibreCat | DOI
 

2011 | Book | LibreCat-ID: 22191
S. Rüsenberg, L. Schmidt, H. Hosse, and H.-J. Schmid, Porosity as a key to increase material properties of laser sintered parts. 2011, pp. 531–538.
LibreCat | DOI
 

2011 | Book | LibreCat-ID: 22358
G. Adam and D. Zimmer, Direct Manufacturing Design Rules. CRC Press, 2011, pp. 545–551.
LibreCat | DOI
 

2011 | Conference Paper | LibreCat-ID: 22360
D. Zimmer and G. Adam, “DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen Konstruktionsregeln,” in Rapid.Tech 2011 Fachmesse und Anwendertagung für Rapid-Technologie, 2011.
LibreCat
 

2011 | Conference Paper | LibreCat-ID: 22029
A. Bagsik and V. Schöppner, “Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in ANTEC, 2011, pp. 1294–1298, doi: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.
LibreCat | DOI
 

2012 | Conference Paper | LibreCat-ID: 22174
S. Rüsenberg, R. Weiffen, F. Knoop, and H.-J. Schmid, “Controlling the Quality of Laser Sintered Parts Along the Process Chain,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 1024–1044.
LibreCat | DOI
 

2012 | Conference Paper | LibreCat-ID: 22204
S. Rüsenberg and H.-J. Schmid, “Mechanical Properties as a Result of multitude of Parameters,” in The European Forum on Additive Manufacturing, 2012, vol. 17.
LibreCat | DOI
 

2012 | Conference Paper | LibreCat-ID: 22364
G. Adam and D. Zimmer, “Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung,” 2012.
LibreCat
 

2012 | Conference Paper | LibreCat-ID: 21680
C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 177–188.
LibreCat | DOI
 

2012 | Conference Paper | LibreCat-ID: 22016
A. Bagsik, V. Schöppner, and E. Klemp, “Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 629–640, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
LibreCat | DOI
 

2012 | Conference Paper | LibreCat-ID: 22164
A. Bagsik, V. Schöppner, and E. Klemp, “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in 1st International Conference on Thermo-Mechanically Graded Materials, 2012, vol. 1, pp. 129–134.
LibreCat
 

2012 | Conference Paper | LibreCat-ID: 22024
A. Bagsik, V. Schöppner, and E. Klemp, “Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085,” in 5th International Conference on Polymer and Mould Innovations, 2012, vol. 5, pp. 266–272, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22175
S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “A material-based quality concept for polymer laser sintering,” in 24th Annual International Solid Freeform Fabrication Symposium , 2013, vol. 24, pp. 44–54.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22192
S. Rüsenberg and H.-J. Schmid, “Advanced characterization method of Nylon 12 materials for application in laser sinter processing,” in International Conference of the Polymer-Processing-Society (PPS), 2013, vol. 29.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22197
S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien,” in Merseburger Rapid Prototyping Forum, 2013, vol. 7.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22201
S. Rüsenberg, A. Bagsik, J. Büsching, and H.-J. Schmid, “Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie,” in RapidTech, 2013.
LibreCat
 

2013 | Conference Paper | LibreCat-ID: 22373
G. Adam and D. Zimmer, “Design for additive manufacturing,” 2013.
LibreCat
 

2013 | Journal Article | LibreCat-ID: 22374
G. Adam and D. Zimmer, “Konstruktionsregeln für additive Fertigungsverfahren ,” Konstruktion, vol. 7, no. 8, pp. 77–82, 2013.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22375
G. Adam, “Die Potentiale additiver Fertigung nutzen,” 2013.
LibreCat
 

2013 | Conference Paper | LibreCat-ID: 22376
G. Adam, “Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre,” 2013.
LibreCat
 

2013 | Conference Paper | LibreCat-ID: 21682
C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs,” in 24th Annual International Solid Freeform Fabrication Symposium, 2013, vol. 24, pp. 998–1008.
LibreCat | DOI
 

2013 | Conference Paper | LibreCat-ID: 22017
M. Fischer and V. Schöppner, “Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling,” in 24th Annual International Solid Freeform Fabrication Symposium, 2013, vol. 24, pp. 805–815, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22176
P. Delfs, A. A. Herale, Z. Li, and H.-J. Schmid, “Simulation of the Surface Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22177
S. Josupeit and H.-J. Schmid, “Three-dimensional in-process temperature measurement of laser sintered part cakes,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 49–58.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22184
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, and H.-J. Schmid, “Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics,” in 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, vol. 72, no. 3, pp. 2383–2385.
LibreCat | DOI
 

2014 | Journal Article | LibreCat-ID: 22186
S. Rüsenberg, S. Josupeit, and H.-J. Schmid, “A method to characterize the quality of a polymer laser sintering process ,” Advances in Mechanical Engineering, vol. 6, pp. 1687–8140, 2014.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22193
S. Josupeit, L. Ordia, and H.-J. Schmid, “Development of a Basic Model to Simulate the Laser Sintering Cooling Process,” in International Conference on Additive Technologies, 2014, vol. 5, pp. 222–227.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22203
P. Delfs and H.-J. Schmid, “Simulation of the Surface Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22382
G. Adam and D. Zimmer, “Extension of prior developed design rules (LS),” in ASPE - Spring topical meeting 2014, 2014.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22383
G. Adam and D. Zimmer, “Systematic investigations of minimum feature sizes and geometrical accuracies,” 2014.
LibreCat
 

2014 | Journal Article | LibreCat-ID: 22384
G. Adam and D. Zimmer, “Design for Additive Manufacturing - Element transitions and aggregated structures,” CIRP Journal of Manufacturing Science and Technology, vol. 7, no. 1, pp. 20–28, 2014.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22385
G. Adam, “Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern,” 2014.
LibreCat
 

2014 | Conference Paper | LibreCat-ID: 22386
G. Adam, “Extension of prior developed design rules for laser sintering,” 2014.
LibreCat
 

2014 | Journal Article | LibreCat-ID: 21706
G. Deppe and R. Koch, “Exploring the influence of an Additive Manufacturing integration on future MRO processes in aeronautics,” Rtejournal, vol. 2014, no. 11, 2014.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22018
M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 923–934, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
LibreCat | DOI
 

2014 | Conference Paper | LibreCat-ID: 22030
M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling,” in ANTEC, 2014, pp. 2331–2336.
LibreCat
 

2014 | Conference Paper | LibreCat-ID: 22021
A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling,” in 29th International Conference of the Polymer Processing Society, 2014, vol. 29, pp. 696–701, doi: 10.1063/1.4873874.
LibreCat | DOI
 

2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22108
W. Reschetnik, A. Riemer, and H. A. Richard, “Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2015, pp. 63–72.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22166
E. Klemp, “Industrial applications in AM - aerospace and overhaul,” in ASME AM3D Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22168
E. Klemp, “Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen,” in Generatives Fertigen und 3D-Drucken: Industrielle Revolution oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22169
E. Klemp, “Möglichkeiten, Chancen und Mythen additiver Fertigung,” in Hanse-Aerospace-Themennachmittag im Hause SLM, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22170
E. Klemp, “Additive Manufacturing - Potenziale, Zukunftschancen und Hürden,” in Messe Interzum, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22171
E. Klemp, “Technology Update 2015 for Metals,” in SLM-Usermeeting, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22172
E. Klemp, “AM-Verfahren - Möglichkeiten in der industriellen Fertigung,” in VDMA - Symposium auf der Hannover Messe Industrie, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22178
P. Delfs, Z. Li, and H.-J. Schmid, “Mass finishing of laser sintered parts,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 514–526.
LibreCat | DOI
 

Filters and Search Terms

(department=219 OR department=624) AND (type=book OR type=book_editor OR type=book_chapter OR type=publicationtype_review OR type=conference OR type=journal_article)

status=public

Search

Filter Publications

Display / Sort

Sorted by: Publishing Year
Citation Style: IEEE

Export / Embed