Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
253 Publications
1778 | Book | LibreCat-ID: 22111
W. Reschetnik, J. P. Brüggemann, G. Kullmer, and L. Risse, Beeinflussung des Risswachstums durch Kerben in additiv gefertigten Strukturen. .
LibreCat
1778 | Book | LibreCat-ID: 22114
A. Riemer, S. Leuders, H. A. Richard, and G. Kullmer, Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe. .
LibreCat
2010 | Conference Paper | LibreCat-ID: 22050
A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with ULTEM 9085,” 2010, doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 22360
D. Zimmer and G. Adam, “DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen Konstruktionsregeln,” in Rapid.Tech 2011 Fachmesse und Anwendertagung für Rapid-Technologie, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 22029
A. Bagsik and V. Schöppner, “Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in ANTEC, 2011, pp. 1294–1298, doi: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22364
G. Adam and D. Zimmer, “Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung,” 2012.
LibreCat
2012 | Conference Paper | LibreCat-ID: 21680
C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 177–188.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22016
A. Bagsik, V. Schöppner, and E. Klemp, “Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 629–640, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22164
A. Bagsik, V. Schöppner, and E. Klemp, “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in 1st International Conference on Thermo-Mechanically Graded Materials, 2012, vol. 1, pp. 129–134.
LibreCat
2012 | Conference Paper | LibreCat-ID: 22024
A. Bagsik, V. Schöppner, and E. Klemp, “Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085,” in 5th International Conference on Polymer and Mould Innovations, 2012, vol. 5, pp. 266–272, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22201
S. Rüsenberg, A. Bagsik, J. Büsching, and H.-J. Schmid, “Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie,” in RapidTech, 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 22373
G. Adam and D. Zimmer, “Design for additive manufacturing,” 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 22375
G. Adam, “Die Potentiale additiver Fertigung nutzen,” 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 22376
G. Adam, “Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre,” 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 22017
M. Fischer and V. Schöppner, “Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling,” in 24th Annual International Solid Freeform Fabrication Symposium, 2013, vol. 24, pp. 805–815, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22184
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, and H.-J. Schmid, “Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics,” in 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, vol. 72, no. 3, pp. 2383–2385.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22383
G. Adam and D. Zimmer, “Systematic investigations of minimum feature sizes and geometrical accuracies,” 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22385
G. Adam, “Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern,” 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22386
G. Adam, “Extension of prior developed design rules for laser sintering,” 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22018
M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 923–934, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22030
M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling,” in ANTEC, 2014, pp. 2331–2336.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22021
A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling,” in 29th International Conference of the Polymer Processing Society, 2014, vol. 29, pp. 696–701, doi: 10.1063/1.4873874.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22108
W. Reschetnik, A. Riemer, and H. A. Richard, “Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2015, pp. 63–72.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22166
E. Klemp, “Industrial applications in AM - aerospace and overhaul,” in ASME AM3D Conference and Expo, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22168
E. Klemp, “Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen,” in Generatives Fertigen und 3D-Drucken: Industrielle Revolution oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22169
E. Klemp, “Möglichkeiten, Chancen und Mythen additiver Fertigung,” in Hanse-Aerospace-Themennachmittag im Hause SLM, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22170
E. Klemp, “Additive Manufacturing - Potenziale, Zukunftschancen und Hürden,” in Messe Interzum, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22171
E. Klemp, “Technology Update 2015 for Metals,” in SLM-Usermeeting, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22172
E. Klemp, “AM-Verfahren - Möglichkeiten in der industriellen Fertigung,” in VDMA - Symposium auf der Hannover Messe Industrie, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22187
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid, “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 540–549.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22395
T. Lieneke et al., “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Proceedings of the Rapid Tech 2015, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22398
G. Adam, “On tolerances for additive manufacturing,” in Inside 3D Printing Conference and Expo, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22399
T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22400
T. Lieneke, “Systematical determination of dimensional tolerances for additive manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21684
G. Deppe, C. Lindemann, and R. Koch, “Developement of an economic decision support for the application of Additive Manufacturing in aerospace,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1560–1563.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21700
U. Jahnke and C. Lindemann, “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy,” in Inside 3D Printing Conference and Expo, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21701
G. Deppe, T. Reiher, and R. Koch, “Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing,” in International Conference Production Engineering and Management 2015, 2015, vol. 5, pp. 219–230.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21703
C. Lindemann, T. Reiher, and R. Koch, “Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing,” in Paris Space Week, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22031
F. Knoop and V. Schöppner, “Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30,” in ASPE Spring Topical Meeting, 2015, pp. 26–31, doi: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22044
F. Knoop and V. Schöppner, “Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 935–948, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22107
J. P. Brüggemann, W. Reschetnik, H. A. Richard, G. Kullmer, and B. Schramm, “Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 290–300.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22109
W. Reschetnik, R. Grylls, B. Bauer, H. A. Richard, and G. Kullmer, “Fatigue Life Manipulation of SLM Parts,” 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22128
J. P. Brüggemann et al., “Optimierung von Fahrradtretkurbeln mittels additiver Fertigung,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 101–112.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22130
W. Reschetnik, J. P. Brüggemann, M. E. Aydinöz, G. Kullmer, H. A. Richard, and M. Schaper, “Lebensdauerbeeinflussung durch Additive Fertigung,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 131–140.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22132
A. Riemer, L. Leuders, G. Kullmer, and H. A. Richard, “Materialkennwerte lasergeschmolzener Werkstoffe,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 161–174.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22146
W. Reschetnik et al., “Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy,” in Procedia Structural Integrity, 2016, pp. 3040–3048.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22149
A. Riemer and H. A. Richard, “Crack Propagation in Additive Manufactured Materials and Structures,” in Procedia Structural Integrity, 2016, pp. 1229–1236.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22194
S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for application in laser sintering,” in International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22403
T. Künneke and D. Zimmer, “Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen,” in DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2016, pp. 151–160.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22409
T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22411
F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
LibreCat
2016 | Book | LibreCat-ID: 21698
C. Lindemann, G. Deppe, and R. Koch, Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat
2016 | Book | LibreCat-ID: 21699
U. Jahnke and R. Koch, Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 21702
T. Reiher, G. Deppe, and R. Koch, “Combining material efficiency and part reliability by product optimization applying additive manufacturing,” in International Conference Production Engineering and Management 2016, 2016, vol. 6, pp. 27–38.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22019
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi: 10.1007/s11837-016-2197-2.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22039
M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 121–133, doi: 10.3139/9783446450608.010.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16270
T. Hickmann, D. Ahlers, and T. Tröster, “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten,” Der Stahlformenbauer , no. 5, 2016.
LibreCat