Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
151 Publications
2024 | Special Issue | LibreCat-ID: 51133
R. Tischendorf et al., Eds., Maghemite nanoparticles synthesis via spray flame synthesis and particle characterization by hole in a tube sampling and scanning mobility particle sizing (HIAT-SMPS). Elsevier, 2024.
LibreCat
| DOI
| Download (ext.)
2024 | Preprint | LibreCat-ID: 51731 | 
J. Beimdiek and H.-J. Schmid, “Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols,” Atmosphere. MDPI, 2024.
LibreCat
| Download (ext.)
2024 | Journal Article | LibreCat-ID: 52357 |
J. Beimdiek and H.-J. Schmid, “Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols,” Atmosphere, vol. 15, no. 3, Art. no. 305, 2024, doi: 10.3390/atmos15030305.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 44102
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster),” presented at the International Congress on Rheology, Athens, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 36983 |
S. Josch, S. Jesinghausen, C. Dechert, and H.-J. Schmid, “Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems,” Rheologica Acta, 2023, doi: 10.1007/s00397-023-01383-2.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 43236
T. Rüther and H.-J. Schmid, “CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag),” presented at the DECHEMA Jahrestreffen PMT 2023, Paderborn, 2023.
LibreCat
| Files available
2023 | Journal Article | LibreCat-ID: 43034 |
S. Josch, S. Jesinghausen, and H.-J. Schmid, “Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete,” Applied Rheology, vol. 33, no. 1, 2023, doi: 10.1515/arh-2022-0140.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 43128
M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Powder Technology, vol. 422, Art. no. 118460, 2023, doi: 10.1016/j.powtec.2023.118460.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44244
S. Ponusamy and H.-J. Schmid, “Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern,” presented at the Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik, Braunschweig, 2023.
LibreCat
| Files available
2023 | Conference Abstract | LibreCat-ID: 44103
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation),” presented at the Annual Meeting of the German Rheological Society (DRG) , Berlin, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 46815 |
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,” Progress in Additive Manufacturing, 2023, doi: 10.1007/s40964-023-00501-z.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 43046 |
S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” The International Journal of Advanced Manufacturing Technology , 2023, doi: https://doi.org/10.1007/s00170-023-11243-1.
LibreCat
| DOI
| Download (ext.)
2023 | Book Chapter | LibreCat-ID: 46870
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 47626
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in PARTEC International Congress on Particle Technology - Book of Abstracts, Nürnberg, 2023, pp. 172–176.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46764 |
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Special Issue | LibreCat-ID: 51136
F. Fröde et al., Eds., Large eddy simulation of iron oxide formation in a laboratory spray flame. Elsevier, 2023.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 51147
O. Massopo et al., “Influence of atomization on the particle formation in spray flame pyrolysis (Presentation),” presented at the International Congress of Particle Technology, Nürnberg, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51145
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, and T. Kasper, “Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster),” presented at the European Aerosol Conference, Málaga, Spain , 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51142
O. Massopo et al., “Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag),” presented at the Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51726
J. Beimdiek, S. Schiller, and H.-J. Schmid, “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster),” presented at the Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn, 2023.
LibreCat
| Files available
2023 | Conference Paper | LibreCat-ID: 51727
J. Beimdiek, S. Schiller, and H.-J. Schmid, “Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system,” presented at the International Congress on Particle Technology | PARTEC 2023, Nürnberg, 2023.
LibreCat
| Files available
2023 | Conference Paper | LibreCat-ID: 51218 |
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50931.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46862 |
F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50926.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 31035 |
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Model droplet formation in extensional filament stretching within a Filament Extension Atomizer,” Rheologica Acta, 2022, doi: 10.1007/s00397-022-01339-y.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 37424
J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster),” presented at the 1st International Workshop on Reacting Particle-Gas Systems, Bochum, 2022.
LibreCat
| Files available
2022 | Journal Article | LibreCat-ID: 35729
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 35724
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 37436
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, and H.-J. Schmid, “Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation),” presented at the 13th World Filtration Congress, San Diego, 2022.
LibreCat
| Files available
2022 | Conference Abstract | LibreCat-ID: 37426
J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster),” presented at the 11th International Aerosol Conference (IAC), Athens, 2022.
LibreCat
| Files available
2022 | Conference Abstract | LibreCat-ID: 37432
J. Beimdiek and H.-J. Schmid, “Novel entrained flow SCR using online synthesized catalyst particles (Poster),” presented at the 13th World Filtration Congress, San Diego, 2022.
LibreCat
| Files available
2022 | Conference Abstract | LibreCat-ID: 37430
J. Beimdiek and H.-J. Schmid, “Novel entrained flow SCR using online synthesized catalyst particles in flue gas cleaning systems (Presentation),” presented at the 25th ETH-Conference on Combustion Generated Nanoparticles, Zürich, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 41160
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Triggering instabilities of polymer solution suspensions under uniaxial extension (Presentation),” presented at the Joint Online Symposium on Rheology, Digital, 2022.
LibreCat
| Files available
2022 | Conference Abstract | LibreCat-ID: 41158
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instability analysis of suspensions with a polymer solution matrix (Presentation),” presented at the Annual European Rheology Conference, Sevilla, 2022.
LibreCat
| Files available
2022 | Conference Abstract | LibreCat-ID: 33695
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Madrid, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 43238
T. Rüther, S. Jesinghausen, and H.-J. Schmid, “A novel correction method for the shear rate in a couette rheometer (Vortrag),” presented at the AERC , Sevilla, 2022.
LibreCat
| Files available
2022 | Conference Abstract | LibreCat-ID: 43243
T. Rüther and H.-J. Schmid, “Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster),” presented at the World Congress on Particle Technology 2022, Madrid, 2022.
LibreCat
| Files available
2022 | Conference Abstract | LibreCat-ID: 43240
T. Rüther, S. Jesinghausen, and H.-J. Schmid, “NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag),” presented at the Joint Online Symposium on Rheology 2022, 2022.
LibreCat
| Files available
2022 | Journal Article | LibreCat-ID: 30228
S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi: https://doi.org/10.1007/s11837-021-05042-w .
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33356 |
S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 44468
S. Schmidt, M. Gräßer, and H.-J. Schmid, “A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges,” SIAM Journal on Scientific Computing, vol. 44, no. 4, pp. B1175–B1194, 2022, doi: 10.1137/20m1389054.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 44469
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering with PA12 and PA6 on a Standard System,” Macromolecular Symposia, vol. 404, no. 1, Art. no. 2100397, 2022, doi: 10.1002/masy.202100397.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30220 |
I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44558.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 25142
C. Kummert, H.-J. Schmid, L. Risse, and G. Kullmer, “Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures,” Journal of Materials Research, 2021, doi: 10.1557/s43578-021-00321-3.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 23760 |
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.
LibreCat
| Download (ext.)
2021 | Conference Abstract | LibreCat-ID: 30364
R. Tischendorf et al., “Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen,” presented at the Jahrestreffen der ProcessNet-Fachgruppe MPS, Paderborn, 2021.
LibreCat
2021 | Misc | LibreCat-ID: 24202
S. Pawelczyk, S. Jesinghausen, and H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention. Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
LibreCat
| Files available
2021 | Conference Abstract | LibreCat-ID: 30225
M. J. Rüther, D. Schulze, and H.-J. Schmid, “Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester,” presented at the Solid Freeform Fabrication Symposium, digital, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 26095
S. Schumacher, C. Asbach, and H.-J. Schmid, “Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections,” Gefahrstoffe, pp. 16–28, 2021, doi: 10.37544/0949-8036-2021-01-02-18.
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 27551
J. Ludwig, C. Kykal, and H.-J. Schmid, “Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation),” in Book of abstracts for the 2021 European Aerosol Conference, 2021.
LibreCat
| Files available
2021 | Conference Abstract | LibreCat-ID: 27553
J. Ludwig and H.-J. Schmid, “Synthese und asymmetrische Funktionalisierung von submikronen Janus-Polymer-Partikeln in der Gasphase (Poster),” presented at the Jahrestreffen der ProcessNet-Fachgruppe Aerosoltechnik, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 24475
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster),” presented at the Jahrestreffen der ProcessNet-Fachgruppen Computational Fluid Dynamics und Mehrphasenströmungen, Online, 2021.
LibreCat
| Files available
2021 | Conference Abstract | LibreCat-ID: 30221
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Filament Extension Atomization – A novel Process for Powder Production? (Presentation),” presented at the Annual European Rheology Conference, Online, 2021.
LibreCat
| Files available
2021 | Conference Paper | LibreCat-ID: 24160 |
I. Kletetzka, C. Kummert, and H.-J. Schmid, “Laser Sintering Design Guidelines for media transmitting Components,” in Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Austin, 2021, vol. 32, doi: http://dx.doi.org/10.26153/tsw/17548.
LibreCat
| DOI
| Download (ext.)
2020 | Report | LibreCat-ID: 24943
D. Menge, S. H. Klippstein, and H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 24241
D. B. Rasche, L. Tigges, and H.-J. Schmid, “An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output,” Review of Scientific Instruments, vol. 91, p. 055104, 2020, doi: 10.1063/1.5133438.
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 25062
R. Tischendorf et al., “Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames,” presented at the 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, Duisburg, 2020.
LibreCat
| Files available
2020 | Journal Article | LibreCat-ID: 21949 |
M. Haist et al., “Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries,” Materials and Structures, 2020, doi: 10.1617/s11527-020-01477-w.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 21948 |
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, and H.-J. Schmid, “Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures,” Materials, Art. no. 467, 2020, doi: 10.3390/ma13020467.
LibreCat
| DOI
| Download (ext.)
2019 | Report | LibreCat-ID: 24628
D. Menge, R. Walter, H.-J. Schmid, and U. P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, vol. 1338. Frankfurt, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Conference Abstract | LibreCat-ID: 24515
R. Tischendorf, M. Bieber, R. Kneer, and H.-J. Schmid, “Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements,” presented at the PARTEC 2019 International Congress on Particle Technology, Nürnberg, 2019.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat
| Download (ext.)
2019 | Journal Article | LibreCat-ID: 22541
I. Giner et al., “Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers,” Applied Surface Science, pp. 873–879, 2019, doi: 10.1016/j.apsusc.2018.12.221.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 26103
S. Abishek, A. J. C. King, J. Schuler, G. Kasper, H.-J. Schmid, and B. J. Mullins, “Representative domain size for the simulation of coalescence filtration in nonwoven and foam media,” Separation and Purification Technology, pp. 344–352, 2018, doi: 10.1016/j.seppur.2018.06.051.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22183 |
D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 22196
C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat
| DOI
2018 | Patent | LibreCat-ID: 29824
H.-J. Schmid and D. Rasche, “Bestimmung von Nanopartikeleigenschaften eines Aerosols.” 2018.
LibreCat
| Files available
2017 | Book Chapter | LibreCat-ID: 26104
J. Lohn and H.-J. Schmid, “Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613,” in Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, 2017.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 26106
J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, and L. Colombi Ciacchi, “Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity,” The Journal of Physical Chemistry C, pp. 15294–15303, 2017, doi: 10.1021/acs.jpcc.7b05655.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 26107
M. Dörmann and H.-J. Schmid, “Distance-dependency of capillary bridges in thermodynamic equilibrium,” Powder Technology, pp. 175–183, 2017, doi: 10.1016/j.powtec.2017.01.012.
LibreCat
| DOI
2017 | Book Chapter | LibreCat-ID: 23759
D. Menge, S. Josupeit, P. Delfs, and H.-J. Schmid, “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, H. A. Richard, B. Schramm, and T. Zipsner, Eds. Wiesbaden: Springer Vieweg, 2017, pp. 105–120.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 26109
S. Josupeit, L. Ordia, and H.-J. Schmid, “Modelling of temperatures and heat flow within laser sintered part cakes,” Additive Manufacturing, pp. 189–196, 2016, doi: 10.1016/j.addma.2016.06.002.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 26111
H.-J. Schmid and S. Pieper, “Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer,” Applied Rheology, 2016, doi: 10.3933/APPLRHEOL-26-64533.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 26118
S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear,” Journal of Non-Newtonian Fluid Mechanics, pp. 1–7, 2016, doi: 10.1016/j.jnnfm.2016.04.004.
LibreCat
| DOI
2016 | Book | LibreCat-ID: 27443
J. Gausemeier et al., Additive Fertigung. München: acatech - Deutsche Akademie der Technikwissenschaften, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22194
S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for application in laser sintering,” in International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 21947
S. Jesinghausen, R. Weiffen, and H.-J. Schmid, “Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows,” Experiments in Fluids, 2016, doi: 10.1007/s00348-016-2241-6.
LibreCat
| DOI
| Download (ext.)
2016 | Journal Article | LibreCat-ID: 25140
S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear,” Journal of Non-Newtonian Fluid Mechanics, pp. 1–7, 2016, doi: 10.1016/j.jnnfm.2016.04.004.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 26108
S. Schiller, C. Hellmich, and H.-J. Schmid, “Evaluation of the Efficiency of Filtration Processes Using Precoat Materials,” Chemical Engineering & Technology, pp. 491–498, 2015, doi: 10.1002/ceat.201500385.
LibreCat
| DOI
2015 | Book Chapter | LibreCat-ID: 26119
J. V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, and U. A. Peuker, “Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols,” in Colloid Process Engineering, Cham, 2015.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 26121
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, and H.-J. Schmid, “Bipolar charge distribution of a soft X-ray diffusion charger,” Journal of Aerosol Science, pp. 77–86, 2015, doi: 10.1016/j.jaerosci.2015.07.002.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 26122
L. Tigges, A. Jain, and H.-J. Schmid, “On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations,” Journal of Aerosol Science, pp. 119–134, 2015, doi: 10.1016/j.jaerosci.2015.05.010.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 26123
S. Schiller and H.-J. Schmid, “Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials,” Powder Technology, pp. 96–105, 2015, doi: 10.1016/j.powtec.2015.03.048.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 26124
M. Dörmann and H.-J. Schmid, “Simulation of Capillary Bridges between Particles,” Procedia Engineering, pp. 14–23, 2015, doi: 10.1016/j.proeng.2015.01.102.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22187
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid, “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 540–549.
LibreCat
| DOI