Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
250 Publications
2021 | Conference Paper | LibreCat-ID: 28440 |
Forming Simulation of Tailored Press Hardened Parts
M. Triebus, A. Reitz, O. Grydin, J. Grenz, A. Schneidt, R. Erhardt, T. Tröster, M. Schaper, in: 13th European LS-DYNA Conference 2021, 2021.
LibreCat
| Download (ext.)
M. Triebus, A. Reitz, O. Grydin, J. Grenz, A. Schneidt, R. Erhardt, T. Tröster, M. Schaper, in: 13th European LS-DYNA Conference 2021, 2021.
2021 | Book | LibreCat-ID: 28461
Großserientaugliche induktive Platinenerwärmung für den Warmformprozess
T. Tröster, F. Pfeifer, B. Nacke, A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, Forschungsvereinigung Stahlanwendung e.V., Düsseldorf, 2021.
LibreCat
T. Tröster, F. Pfeifer, B. Nacke, A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, Forschungsvereinigung Stahlanwendung e.V., Düsseldorf, 2021.
2021 | Conference Abstract | LibreCat-ID: 21442
Development of a submodel technique for FFT-based solvers in micromechanical analysis
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: 2021.
LibreCat
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: 2021.
2021 | Conference Paper | LibreCat-ID: 20857
Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing
A.A. Camberg, T. Tröster, C. Latuske, in: Springer, 2021.
LibreCat
| DOI
A.A. Camberg, T. Tröster, C. Latuske, in: Springer, 2021.
2021 | Conference Paper | LibreCat-ID: 20858
A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design
A.A. Camberg, T. Tröster, N. Wingenbach, C. Hielscher, J. Grenz, in: Springer, 2021.
LibreCat
| DOI
A.A. Camberg, T. Tröster, N. Wingenbach, C. Hielscher, J. Grenz, in: Springer, 2021.
2021 | Journal Article | LibreCat-ID: 22518 |
A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions
M. Triebus, J. Gierse, T. Marten, T. Tröster, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat
| DOI
| Download (ext.)
M. Triebus, J. Gierse, T. Marten, T. Tröster, IOP Conference Series: Materials Science and Engineering (2021).
2021 | Report | LibreCat-ID: 29807
Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern
C. Linnig, T. Tröster, Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern, Deutsche Bundesstiftung Umwelt (DBU), Osnabrück, 2021.
LibreCat
C. Linnig, T. Tröster, Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern, Deutsche Bundesstiftung Umwelt (DBU), Osnabrück, 2021.
2021 | Journal Article | LibreCat-ID: 24131
Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components
T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, T. Niendorf, Metals (2021).
LibreCat
| DOI
T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, T. Niendorf, Metals (2021).
2021 | Journal Article | LibreCat-ID: 21064
The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, Metals (2021).
LibreCat
| DOI
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, Metals (2021).
2021 | Journal Article | LibreCat-ID: 24130
On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites
A. Magnier, T. Wu, S.R. Tinkloh, T. Tröster, B. Scholtes, T. Niendorf, Polymer Testing (2021).
LibreCat
| DOI
A. Magnier, T. Wu, S.R. Tinkloh, T. Tröster, B. Scholtes, T. Niendorf, Polymer Testing (2021).
2021 | Conference Abstract | LibreCat-ID: 21726 |
HyOpt - Optimization-Based Development of Hybrid Materials
M. Triebus, T. Tröster, in: 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
LibreCat
| Download (ext.)
M. Triebus, T. Tröster, in: 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
2021 | Journal Article | LibreCat-ID: 33895
A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations
A.A. Camberg, T. Erhart, T. Tröster, Materials 14 (2021).
LibreCat
| DOI
A.A. Camberg, T. Erhart, T. Tröster, Materials 14 (2021).
2021 | Dissertation | LibreCat-ID: 37579
Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe
A.A. Camberg, Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe, Shaker Verlag, 2021.
LibreCat
| DOI
A.A. Camberg, Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe, Shaker Verlag, 2021.
2021 | Dissertation | LibreCat-ID: 37586
Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen
J. Huber, Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen, Shaker Verlag, 2021.
LibreCat
J. Huber, Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen, Shaker Verlag, 2021.
2021 | Dissertation | LibreCat-ID: 37584
Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment
S. Pöhler, Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment, Shaker Verlag, 2021.
LibreCat
S. Pöhler, Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment, Shaker Verlag, 2021.
2021 | Journal Article | LibreCat-ID: 24541
Load Path Transmission in Joining Elements
C. Steinfelder, S. Martin, A. Brosius, T. Tröster, Key Engineering Materials (2021) 73–80.
LibreCat
| DOI
C. Steinfelder, S. Martin, A. Brosius, T. Tröster, Key Engineering Materials (2021) 73–80.
2021 | Journal Article | LibreCat-ID: 24548 |
Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties
S. Martin, T. Tröster, ESAFORM 2021 (2021).
LibreCat
| DOI
| Download (ext.)
S. Martin, T. Tröster, ESAFORM 2021 (2021).
2021 | Conference Paper | LibreCat-ID: 26994
Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases
T. Stallmeister, S. Martin, T. Marten, T. Tröster, in: 2021.
LibreCat
T. Stallmeister, S. Martin, T. Marten, T. Tröster, in: 2021.
2021 | Journal Article | LibreCat-ID: 24009
A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations
A.A. Camberg, T. Erhart, T. Tröster, Materials (2021).
LibreCat
| DOI
A.A. Camberg, T. Erhart, T. Tröster, Materials (2021).
2021 | Journal Article | LibreCat-ID: 23898
Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, M. Haase, J. Gierse, D. Zimmer, T. Tröster, M. Schaper, Journal of Materials Processing Technology (2021).
LibreCat
| DOI
A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, M. Haase, J. Gierse, D. Zimmer, T. Tröster, M. Schaper, Journal of Materials Processing Technology (2021).
2020 | Dissertation | LibreCat-ID: 21209
Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V
D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , Shaker, 2020.
LibreCat
D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , Shaker, 2020.
2020 | Journal Article | LibreCat-ID: 17812
Ansatz zur effizienteren Auslegung von Hybridbauteilen
C. Hielscher, J. Grenz, A.A. Camberg, N. Wingenbach, ATZ - Automobiltechnische Zeitschrift (2020) 60–65.
LibreCat
| DOI
C. Hielscher, J. Grenz, A.A. Camberg, N. Wingenbach, ATZ - Automobiltechnische Zeitschrift (2020) 60–65.
2020 | Journal Article | LibreCat-ID: 17813
Approach to More Efficient Design of Hybrid Components
C. Hielscher, J. Grenz, A.A. Camberg, N. Wingenbach, ATZ Worldwide (2020) 58–61.
LibreCat
| DOI
C. Hielscher, J. Grenz, A.A. Camberg, N. Wingenbach, ATZ Worldwide (2020) 58–61.
2020 | Conference Paper | LibreCat-ID: 20843
Residual stress measurement in GFRP/steel hybrid components
T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, in: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, in: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
2020 | Conference Paper | LibreCat-ID: 20854 |
A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter
A.A. Camberg, T. Tröster, (2020).
LibreCat
| DOI
| Download (ext.)
A.A. Camberg, T. Tröster, (2020).
2020 | Conference Paper | LibreCat-ID: 20856 |
Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework
A.A. Camberg, T. Erhart, T. Tröster, in: 2020.
LibreCat
| DOI
| Download (ext.)
A.A. Camberg, T. Erhart, T. Tröster, in: 2020.
2020 | Conference Abstract | LibreCat-ID: 21712
Wood-based materials as a sustainable alternative for future car body construction
S. Schweizer, E.F. Akbulut Irmak, T. Tröster, in: Automotive Circle, 2020.
LibreCat
S. Schweizer, E.F. Akbulut Irmak, T. Tröster, in: Automotive Circle, 2020.
2020 | Conference Paper | LibreCat-ID: 16939 |
A Holistic Approach to Optimization-Based Design of Hybrid Materials
M. Triebus, T. Tröster, in: Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
LibreCat
| Download (ext.)
M. Triebus, T. Tröster, in: Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
2020 | Conference Paper | LibreCat-ID: 15490 |
Reduction of systematic measurement deviation in acoustic absorption measurement systems
L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, B. Henning, in: Fortschritte Der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat
| Files available
L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, B. Henning, in: Fortschritte Der Akustik - DAGA 2020, 2020, pp. 1077–1080.
2020 | Conference Paper | LibreCat-ID: 16930
Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
2020 | Journal Article | LibreCat-ID: 20842
Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method
T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, T. Niendorf, Journal of Composites Science (2020).
LibreCat
| DOI
T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, T. Niendorf, Journal of Composites Science (2020).
2020 | Dissertation | LibreCat-ID: 37585
Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen
A. Huxol, Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen, Shaker Verlag, 2020.
LibreCat
A. Huxol, Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen, Shaker Verlag, 2020.
2020 | Journal Article | LibreCat-ID: 15945
A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, Composite Structures 238 (2020).
LibreCat
| DOI
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, Composite Structures 238 (2020).
2020 | Conference Paper | LibreCat-ID: 27417
MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED
D. Chalicheemalapalli Jayasankar, T. Stallmeister, Z. Wang, T. Tröster, in: J.M. Hausmann, M. Siebert, A. von Hehl, K.A. Weidenmann (Eds.), Hybrid 2020 Materials and Structures, 2020, pp. 167–172.
LibreCat
| Files available
D. Chalicheemalapalli Jayasankar, T. Stallmeister, Z. Wang, T. Tröster, in: J.M. Hausmann, M. Siebert, A. von Hehl, K.A. Weidenmann (Eds.), Hybrid 2020 Materials and Structures, 2020, pp. 167–172.
2019 | Report | LibreCat-ID: 21210
Schlussbericht zum Vorhaben "Additive Leichtbaustrukturen für Flugzeugkomponenten" : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme
D. Ahlers, T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme, Universität Paderborn, TIB, 2019.
LibreCat
| DOI
D. Ahlers, T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme, Universität Paderborn, TIB, 2019.
2019 | Conference Paper | LibreCat-ID: 16793
Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process
F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, B. Nacke, in: Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 2019, pp. 585–593.
LibreCat
F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, B. Nacke, in: Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 2019, pp. 585–593.
2019 | Conference Paper | LibreCat-ID: 16794
Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung
J.A. Striewe, R. Thomas, F. Fischer, T. Wiens, T. Tröster, in: DGM-Inventum GmbH , Sankt Augustin, 2019.
LibreCat
J.A. Striewe, R. Thomas, F. Fischer, T. Wiens, T. Tröster, in: DGM-Inventum GmbH , Sankt Augustin, 2019.
2019 | Misc | LibreCat-ID: 16825
Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V
D. Ahlers, T. Tröster, Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V, EuroPM, Maastricht, 2019.
LibreCat
D. Ahlers, T. Tröster, Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V, EuroPM, Maastricht, 2019.
2019 | Conference Paper | LibreCat-ID: 16826
A holistic approach to the lightweight design of tailored structural components using the example of a hybrid A-pillar
A.A. Camberg, C. Hielscher, in: Aachen Body Engineering Days 2019, 2019.
LibreCat
A.A. Camberg, C. Hielscher, in: Aachen Body Engineering Days 2019, 2019.
2019 | Conference Paper | LibreCat-ID: 16827
Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks
A.A. Camberg, T. Tröster, in: 26. Sächsische Fachtagung Umformtechnik, 2019.
LibreCat
A.A. Camberg, T. Tröster, in: 26. Sächsische Fachtagung Umformtechnik, 2019.
2019 | Conference Paper | LibreCat-ID: 16831
A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: 2019.
LibreCat
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: 2019.
2019 | Journal Article | LibreCat-ID: 15875
Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications
A.A. Camberg, T. Tröster, F. Bohner, J. Tölle, IOP Conference Series: Materials Science and Engineering 651 (2019) 012057.
LibreCat
| DOI
A.A. Camberg, T. Tröster, F. Bohner, J. Tölle, IOP Conference Series: Materials Science and Engineering 651 (2019) 012057.
2019 | Journal Article | LibreCat-ID: 15950
Fracture prediction of additively manufactured AlSi10Mg materials
E.F. Akbulut Irmak, T. Tröster, Procedia Structural Integrity (2019) 190–197.
LibreCat
| DOI
E.F. Akbulut Irmak, T. Tröster, Procedia Structural Integrity (2019) 190–197.
2019 | Conference Paper | LibreCat-ID: 15976
Modeling the Energy Absorption Characteristics of Wood Crash Elements
E.F. Akbulut Irmak, J. Hanses, S. Schweizer, T. Tröster, in: 2019.
LibreCat
E.F. Akbulut Irmak, J. Hanses, S. Schweizer, T. Tröster, in: 2019.
2019 | Report | LibreCat-ID: 16029
Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess
T. Marten, T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess, Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2019.
LibreCat
T. Marten, T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess, Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2019.
2019 | Conference Paper | LibreCat-ID: 16030
Press Hardening Integrated Structuring for Hybrid Components
M. Triebus, S. Bienia, T. Marten, T. Tröster, K. Dröder, in: Verlag Wissenschaftliche Scripten, 2019.
LibreCat
M. Triebus, S. Bienia, T. Marten, T. Tröster, K. Dröder, in: Verlag Wissenschaftliche Scripten, 2019.
2019 | Book Chapter | LibreCat-ID: 13436
TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES
A.A. Camberg, I. Stratmann, T. Tröster, in: Technologies for Economical and Functional Lightweight Design, Berlin, Heidelberg, 2019.
LibreCat
| DOI
A.A. Camberg, I. Stratmann, T. Tröster, in: Technologies for Economical and Functional Lightweight Design, Berlin, Heidelberg, 2019.
2019 | Conference Paper | LibreCat-ID: 16032
Self-sealing tool concept for RTM-processes
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.
LibreCat
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.
2019 | Conference Paper | LibreCat-ID: 16033
Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.
LibreCat
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.
2019 | Dissertation | LibreCat-ID: 41958
Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen
H. Opdemom, Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen, Shaker Verlag, 2019.
LibreCat
H. Opdemom, Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen, Shaker Verlag, 2019.
2019 | Dissertation | LibreCat-ID: 41960
Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation
M.P. Stolzenburg, Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation, 2019.
LibreCat
| DOI
M.P. Stolzenburg, Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation, 2019.
2019 | Conference Paper | LibreCat-ID: 16027
Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions
A.A. Camberg, M. Striewe, T. Tröster, F. Bohner, J. Tölle, in: 5th MATFEM Conference, MATFEM, München, 2019.
LibreCat
A.A. Camberg, M. Striewe, T. Tröster, F. Bohner, J. Tölle, in: 5th MATFEM Conference, MATFEM, München, 2019.
2019 | Book | LibreCat-ID: 16795
Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK
J.A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, G. Grundmeier, Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK, Europäische Forschungsgesellschaft für Blechverarbeitung, Hannover, 2019.
LibreCat
J.A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, G. Grundmeier, Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK, Europäische Forschungsgesellschaft für Blechverarbeitung, Hannover, 2019.
2019 | Conference Paper | LibreCat-ID: 16028
Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK
R. Grothe, J.A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, G. Meschut, in: 2019.
LibreCat
R. Grothe, J.A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, G. Meschut, in: 2019.
2018 | Conference Abstract | LibreCat-ID: 19868
Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions
A.A. Camberg, T. Tröster, N. Sotirov, J. Tölle, F. Bohner, in: Materials Science and Engineering (MSE) Congress 2018, Darmstadt, 2018.
LibreCat
A.A. Camberg, T. Tröster, N. Sotirov, J. Tölle, F. Bohner, in: Materials Science and Engineering (MSE) Congress 2018, Darmstadt, 2018.
2018 | Misc | LibreCat-ID: 6594
Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen
L. Claes, H. Zeipert, P. Koppa, T. Tröster, B. Henning, Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen, Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
L. Claes, H. Zeipert, P. Koppa, T. Tröster, B. Henning, Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen, Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
2018 | Journal Article | LibreCat-ID: 15876
Top-down design of tailored fiber-metal laminates
A.A. Camberg, K. Engelkemeier, J. Dietrich, T. Heggemann, Lightweight Design Worldwide 11 (2018) 24–29.
LibreCat
| DOI
A.A. Camberg, K. Engelkemeier, J. Dietrich, T. Heggemann, Lightweight Design Worldwide 11 (2018) 24–29.
2018 | Conference Paper | LibreCat-ID: 15960
Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models
N. Weiß-Borkowski, J. Lian, A.A. Camberg, T. Tröster, S. Münstermann, W. Bleck, H. Gese, H. Richter, in: 2018.
LibreCat
| DOI
N. Weiß-Borkowski, J. Lian, A.A. Camberg, T. Tröster, S. Münstermann, W. Bleck, H. Gese, H. Richter, in: 2018.
2018 | Journal Article | LibreCat-ID: 15977
Crushing behavior and energy absorption performance of a bio-inspired metallic structure: Experimental and numerical study
A. Tasdemirci, E.F. Akbulut Irmak, E. Guzel, F. Tuzgel, A. Yucesoy, S. Sahin, M. Guden, Thin-Walled Structures (2018) 547–555.
LibreCat
| DOI
A. Tasdemirci, E.F. Akbulut Irmak, E. Guzel, F. Tuzgel, A. Yucesoy, S. Sahin, M. Guden, Thin-Walled Structures (2018) 547–555.
2018 | Conference Paper | LibreCat-ID: 16034
Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures
A.A. Camberg, T. Tröster, in: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat
A.A. Camberg, T. Tröster, in: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
2018 | Conference Paper | LibreCat-ID: 16039
Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V
D. Ahlers, T. Tröster, in: 2018.
LibreCat
D. Ahlers, T. Tröster, in: 2018.
2018 | Conference Paper | LibreCat-ID: 16040
Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding
Z. Wang, T. Tröster, in: 2018.
LibreCat
Z. Wang, T. Tröster, in: 2018.
2018 | Conference Paper | LibreCat-ID: 16042 |
Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures
M. Triebus, T. Tröster, A.A. Camberg, S. Bienia, K. Dröder, in: 15. Deutsches LS-Dyna Forum, 2018.
LibreCat
| Download (ext.)
M. Triebus, T. Tröster, A.A. Camberg, S. Bienia, K. Dröder, in: 15. Deutsches LS-Dyna Forum, 2018.
2018 | Conference Paper | LibreCat-ID: 16043 |
The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming
A.A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , J. Tölle, in: 15. Deutsches LS-Dyna Forum, 2018.
LibreCat
| Download (ext.)
A.A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , J. Tölle, in: 15. Deutsches LS-Dyna Forum, 2018.
2018 | Journal Article | LibreCat-ID: 16045
Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von Gesamtfahrzeugsimulationen
A.A. Camberg, Carbon Composites Magazin (2018) 15–16.
LibreCat
A.A. Camberg, Carbon Composites Magazin (2018) 15–16.
2018 | Conference Abstract | LibreCat-ID: 16056
Holz als Werkstoff im Automobil
S. Schweizer, T. Tröster, in: 2018.
LibreCat
S. Schweizer, T. Tröster, in: 2018.
2018 | Conference Paper | LibreCat-ID: 16057
Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess
Z. Wang, T. Tröster, in: 2018.
LibreCat
Z. Wang, T. Tröster, in: 2018.
2018 | Journal Article | LibreCat-ID: 13439
Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models
A.A. Camberg, F. Bohner, J. Tölle, A. Schneidt, S. Meiners, T. Tröster, IOP Conference Series: Materials Science and Engineering (2018).
LibreCat
| DOI
A.A. Camberg, F. Bohner, J. Tölle, A. Schneidt, S. Meiners, T. Tröster, IOP Conference Series: Materials Science and Engineering (2018).
2018 | Conference Paper | LibreCat-ID: 16118
Processing Short Fiber-reinforced Polymers in the Fused Deposition Modeling Process
C. Schumacher, V. Schöppner, S. Gnaase, in: Proceedings of the 29th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2018.
LibreCat
C. Schumacher, V. Schöppner, S. Gnaase, in: Proceedings of the 29th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2018.
2018 | Dissertation | LibreCat-ID: 37573
Untersuchungen zur induktiven Erwärmung im Warmformprozess
J. Niewel, Untersuchungen zur induktiven Erwärmung im Warmformprozess , Shaker Verlag, 2018.
LibreCat
J. Niewel, Untersuchungen zur induktiven Erwärmung im Warmformprozess , Shaker Verlag, 2018.
2018 | Conference Paper | LibreCat-ID: 16052
FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING
I. Horwath, S. Dohmeier-Fischer, N. Weiß-Borkowski, T. Tröster, in: INTED2018 Proceedings, 2018.
LibreCat
| DOI
I. Horwath, S. Dohmeier-Fischer, N. Weiß-Borkowski, T. Tröster, in: INTED2018 Proceedings, 2018.
2018 | Journal Article | LibreCat-ID: 15957
Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.
LibreCat
| DOI
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.
2018 | Conference Paper | LibreCat-ID: 16048
Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing
D. Ahlers, T. Tröster, S. Hermann, P. Koppa, P. Gloetter, M. Schaper, M. Peters, M. Burns, F. Hengsbach, A. Altmann, in: Contributed Papers from MS&T17, 2018.
LibreCat
| DOI
D. Ahlers, T. Tröster, S. Hermann, P. Koppa, P. Gloetter, M. Schaper, M. Peters, M. Burns, F. Hengsbach, A. Altmann, in: Contributed Papers from MS&T17, 2018.
2018 | Conference Paper | LibreCat-ID: 16054
NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH
N. Weiß-Borkowski, I. Horwath, A. Berscheid, S. Dohmeier-Fischer, T. Tröster, in: INTED2018 Proceedings, 2018.
LibreCat
| DOI
N. Weiß-Borkowski, I. Horwath, A. Berscheid, S. Dohmeier-Fischer, T. Tröster, in: INTED2018 Proceedings, 2018.
2018 | Conference Paper | LibreCat-ID: 16035
Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness
J.A. Striewe, R. Grothe, J. Kowatz, T. Tröster, G. Grundmeier, G. Meschut, in: 2018.
LibreCat
J.A. Striewe, R. Grothe, J. Kowatz, T. Tröster, G. Grundmeier, G. Meschut, in: 2018.
2018 | Conference Paper | LibreCat-ID: 16050
LHYBS – Lightweight Design by Novel Hybrid Materials
A.A. Camberg, T. Tröster, T. Heggemann, H. Homberg, M. Schaper, J. Dietrich, W. Bremser, L. Achterberg, M. Kabst, M. Wille, V. Peckhaus, in: 2018.
LibreCat
A.A. Camberg, T. Tröster, T. Heggemann, H. Homberg, M. Schaper, J. Dietrich, W. Bremser, L. Achterberg, M. Kabst, M. Wille, V. Peckhaus, in: 2018.
2018 | Conference Paper | LibreCat-ID: 16055
Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM
C. Zinn, Z. Wang, T. Tröster, M. Schaper, in: 2018.
LibreCat
C. Zinn, Z. Wang, T. Tröster, M. Schaper, in: 2018.
2018 | Journal Article | LibreCat-ID: 24104
Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.
LibreCat
| DOI
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.
2018 | Journal Article | LibreCat-ID: 15958
Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, T. Tröster, R. Mahnken, G. Meschut, M. Schaper, Composites Part B: Engineering (2018) 173–185.
LibreCat
| DOI
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, T. Tröster, R. Mahnken, G. Meschut, M. Schaper, Composites Part B: Engineering (2018) 173–185.
2017 | Conference Paper | LibreCat-ID: 6559
Additively manufactured acoustic diffuser structures for ultrasonic measurement applications
L. Claes, H. Zeipert, P. Koppa, T. Tröster, B. Henning, in: Proceedings of Meetings on Acoustics, Honolulu, 2017, p. 030004.
LibreCat
| DOI
L. Claes, H. Zeipert, P. Koppa, T. Tröster, B. Henning, in: Proceedings of Meetings on Acoustics, Honolulu, 2017, p. 030004.
2017 | Conference Paper | LibreCat-ID: 16791
Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.
LibreCat
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16792
Effects of Holes in Blanks for Press Hardening Process due to Induction Heating
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.
LibreCat
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.
2017 | Journal Article | LibreCat-ID: 15941
Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading
C. Reuter, K.-H. Sauerland, T. Tröster, Composite Structures (2017) 33–44.
LibreCat
| DOI
C. Reuter, K.-H. Sauerland, T. Tröster, Composite Structures (2017) 33–44.
2017 | Journal Article | LibreCat-ID: 15942
Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact
C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
LibreCat
| DOI
C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
2017 | Journal Article | LibreCat-ID: 15944
Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites
J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures (2017) 501–508.
LibreCat
| DOI
J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures (2017) 501–508.
2017 | Conference Paper | LibreCat-ID: 16059
Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model
N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck, in: Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.
LibreCat
| DOI
N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck, in: Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.
2017 | Journal Article | LibreCat-ID: 16062
Separation of Hybrid Structures for the Reclaim of their Single Components
S. Schweizer, A. Becker-Staines, T. Tröster, Key Engineering Materials (2017) 568–575.
LibreCat
| DOI
S. Schweizer, A. Becker-Staines, T. Tröster, Key Engineering Materials (2017) 568–575.
2017 | Conference Paper | LibreCat-ID: 16063
Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V
D. Ahlers, T. Tröster, in: 2017.
LibreCat
D. Ahlers, T. Tröster, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16065
Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.
LibreCat
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.
2017 | Dissertation | LibreCat-ID: 16070
Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen
N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
LibreCat
N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
2017 | Conference Paper | LibreCat-ID: 16071
Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen
Z. Wang, P. Kutz, T. Tröster, in: 2017.
LibreCat
Z. Wang, P. Kutz, T. Tröster, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16072
Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH
N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.
LibreCat
N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16073
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates
N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.
LibreCat
N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16074
Materialkombinationen in der additive Fertigung
D. Ahlers, T. Tröster, in: 2017.
LibreCat
D. Ahlers, T. Tröster, in: 2017.
2017 | Conference Paper | LibreCat-ID: 16075
Aspekte der Produktentwicklung in der additiven Fertigung
D. Ahlers, T. Tröster, in: 2017.
LibreCat
D. Ahlers, T. Tröster, in: 2017.
2017 | Dissertation | LibreCat-ID: 37564
Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen
M.M. Frantz, Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen, Shaker Verlag, 2017.
LibreCat
M.M. Frantz, Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen, Shaker Verlag, 2017.
2017 | Conference Paper | LibreCat-ID: 16066
Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing
D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
2017 | Journal Article | LibreCat-ID: 24108
Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties
F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials & Design (2017) 136–142.
LibreCat
| DOI
F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials & Design (2017) 136–142.
2017 | Journal Article | LibreCat-ID: 15961
Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017).
LibreCat
| DOI
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017).
2017 | Dissertation | LibreCat-ID: 16068
Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen
T. Marten, Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen, Shaker Verlag, 2017.
LibreCat
T. Marten, Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen, Shaker Verlag, 2017.