Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
250 Publications
2021 | Conference Paper | LibreCat-ID: 28440 | 
Triebus, Marcel, Alexander Reitz, Olexandr Grydin, Julian Grenz, Andreas Schneidt, Rüdiger Erhardt, Thomas Tröster, and Mirko Schaper. “Forming Simulation of Tailored Press Hardened Parts.” In 13th European LS-DYNA Conference 2021, 2021.
LibreCat
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
Tröster, Thomas, Florian Pfeifer, Bernard Nacke, and André Dietrich. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Vol. P1038. FOSTA-Berichte. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 20857
Camberg, Alan Adam, Thomas Tröster, and Clemens Latuske. “Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing.” Springer, 2021. https://doi.org/10.1007/978-3-662-62924-6_28.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20858
Camberg, Alan Adam, Thomas Tröster, Nils Wingenbach, Christian Hielscher, and Julian Grenz. “A New Numerical Method for Potential Anaylsis and Design of Hybrid Components from Full Vehicle Simulations: Implementation and Component Design.” Springer, 2021. https://doi.org/10.1007/978-3-662-62924-6_30.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22518 |
Triebus, Marcel, Jan Gierse, Thorsten Marten, and Thomas Tröster. “A New Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1157/1/012052.
LibreCat
| DOI
| Download (ext.)
2021 | Report | LibreCat-ID: 29807
Linnig, Caterina, and Thomas Tröster. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Osnabrück: Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24131
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas Niendorf. “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components.” Metals, 2021. https://doi.org/10.3390/met11020335.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis.” Metals, 2021. https://doi.org/10.3390/met11010156.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24130
Magnier, A., T. Wu, Steffen Rainer Tinkloh, Thomas Tröster, B. Scholtes, and T. Niendorf. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.” Polymer Testing, 2021. https://doi.org/10.1016/j.polymertesting.2021.107146.
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 21726 |
Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development of Hybrid Materials.” In 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 33895
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials 14, no. 17 (2021). https://doi.org/10.3390/ma14175106.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 37579
Camberg, Alan Adam. Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe. Vol. 2021,52. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2021. https://doi.org/10.2370/9783844082715.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 37586
Huber, Johannes. Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen. Vol. 2021,50. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37584
Pöhler, Simon. Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment. Vol. 2021,49. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24541
Steinfelder, Christian, Sven Martin, Alexander Brosius, and Thomas Tröster. “Load Path Transmission in Joining Elements.” Key Engineering Materials, 2021, 73–80. https://doi.org/10.4028/www.scientific.net/kem.883.73.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24548 |
Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.” ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.3801.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister, Tim, Sven Martin, Thorsten Marten, and Thomas Tröster. “Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24009
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials, 2021. https://doi.org/10.3390/ma14175106.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117183.
LibreCat
| DOI
2020 | Dissertation | LibreCat-ID: 21209
Ahlers, Dominik. Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol. 19. Forschungsberichte des Direct Manufacturing Research Centers. Shaker, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 17812
Hielscher, Christian, Julian Grenz, Alan Adam Camberg, and Nils Wingenbach. “Ansatz zur effizienteren Auslegung von Hybridbauteilen.” ATZ - Automobiltechnische Zeitschrift, 2020, 60–65. https://doi.org/10.1007/s35148-020-0284-8.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 17813
Hielscher, Christian, Julian Grenz, Alan Adam Camberg, and Nils Wingenbach. “Approach to More Efficient Design of Hybrid Components.” ATZ Worldwide, 2020, 58–61. https://doi.org/10.1007/s38311-020-0267-0.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 20843
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, and Wolfgang Zinn. “Residual Stress Measurement in GFRP/Steel Hybrid Components.” In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20854 |
Camberg, Alan Adam, and Thomas Tröster. “A Simplified Method for the Evaluation of the Layer Compression Test Using One 3D Digital Image Correlation System and Considering the Material Anisotropy by the Equibiaxial Lankford Parameter.” IOP Conference Series: Materials Science and Engineering, 2020. https://doi.org/10.1088/1757-899X/967/1/012077.
LibreCat
| DOI
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 20856 |
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “Predicting Fracture at Non-Isothermal Forming Conditions: A Temperature Dependent Extension of the LS-DYNA GISSMO Fracture Indicator Framework,” 2020. https://doi.org/10.13140/RG.2.2.23924.17288.
LibreCat
| DOI
| Download (ext.)
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer, Swetlana, Emine Fulya Akbulut Irmak, and Thomas Tröster. “Wood-Based Materials as a Sustainable Alternative for Future Car Body Construction.” Automotive Circle, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 16939 |
Triebus, Marcel, and Thomas Tröster. “A Holistic Approach to Optimization-Based Design of Hybrid Materials.” In Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
LibreCat
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 15490 |
Claes, Leander, Elmar Baumhögger, Torben Rüther, Jan Gierse, Thomas Tröster, and Bernd Henning. “Reduction of Systematic Measurement Deviation in Acoustic Absorption Measurement Systems.” In Fortschritte Der Akustik - DAGA 2020, 1077–80, 2020.
LibreCat
| Files available
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Numerical Investigation of the Hole-Drilling Method Applied to Intrinsic Manufactured Metal-CFRP Hybrids.” In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 20842
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas Niendorf. “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method.” Journal of Composites Science, 2020. https://doi.org/10.3390/jcs4030143.
LibreCat
| DOI
2020 | Dissertation | LibreCat-ID: 37585
Huxol, Andrea. Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen. Vol. 2020,42. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “A Micromechanical-Based Finite Element Simulation of Process-Induced Residual Stresses in Metal-CFRP-Hybrid Structures.” Composite Structures 238 (2020). https://doi.org/10.1016/j.compstruct.2020.111926.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar, Deviprasad, Tim Stallmeister, Zheng Wang, and Thomas Tröster. “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED.” In Hybrid 2020 Materials and Structures, edited by Joachim M Hausmann, Marc Siebert, Axel von Hehl, and Kay André Weidenmann, 167–72, 2020.
LibreCat
| Files available
2019 | Report | LibreCat-ID: 21210
Ahlers, Dominik, and Thomas Tröster. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn, 2019. https://doi.org/10.2314/KXP:1695591887.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer, Florian, André Dietrich, Thorsten Marten, Thomas Tröster, and Bernard Nacke. “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process.” In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 585–93, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16794
Striewe, Jan André, Robert Thomas, Fabian Fischer, Timo Wiens, and Thomas Tröster. “Energieabsorptions- Und Versagensverhalten Eines Automobilen Seitenschwellers Mit Lokaler Verstärkung Aus Kohlenstofffaserverstärktem Kunststoff Nach Alterung.” Sankt Augustin: DGM-Inventum GmbH , 2019.
LibreCat
2019 | Misc | LibreCat-ID: 16825
Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM 2019 Congress & Exhibition – SIS: Optimising the Properties of AM Parts Using Hot Isostatic Pressing. Maastricht: EuroPM, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16826
Camberg, Alan Adam, and Christian Hielscher. “A Holistic Approach to the Lightweight Design of Tailored Structural Components Using the Example of a Hybrid A-Pillar.” In Aachen Body Engineering Days 2019, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16827
Camberg, Alan Adam, and Thomas Tröster. “Challenges in Fracture Modeling under Non-Isothermal Forming Conditions Using the Example of a New Forming Process for Aluminum Blanks.” In 26. Sächsische Fachtagung Umformtechnik, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “A Micromechanical Based Finite Element Simulation of Process Induced Residual Stresses in Metal-CFRP-Hybrid Structures,” 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 15875
Camberg, Alan Adam, Thomas Tröster, F. Bohner, and J. Tölle. “Predicting Plasticity and Fracture of Severe Pre-Strained EN AW-5182 by Yld2000 Yield Locus and Hosford-Coulomb Fracture Model in Sheet Forming Applications.” IOP Conference Series: Materials Science and Engineering 651 (2019): 012057. https://doi.org/10.1088/1757-899X/651/1/012057.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak, Emine Fulya, and Thomas Tröster. “Fracture Prediction of Additively Manufactured AlSi10Mg Materials.” Procedia Structural Integrity, 2019, 190–97. https://doi.org/10.1016/j.prostr.2019.12.101.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak, Emine Fulya, Julius Hanses, Swetlana Schweizer, and Thomas Tröster. “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” 2019.
LibreCat
2019 | Report | LibreCat-ID: 16029
Marten, Thorsten, and Thomas Tröster. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16030
Triebus, Marcel, S. Bienia, Thorsten Marten, Thomas Tröster, and K. Dröder. “Press Hardening Integrated Structuring for Hybrid Components.” Verlag Wissenschaftliche Scripten, 2019.
LibreCat
2019 | Book Chapter | LibreCat-ID: 13436
Camberg, Alan Adam, Ina Stratmann, and Thomas Tröster. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” In Technologies for Economical and Functional Lightweight Design. Berlin, Heidelberg, 2019. https://doi.org/10.1007/978-3-662-58206-0_12.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Self-Sealing Tool Concept for RTM-Processes,” 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 41958
Opdemom, Hermann. Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen. Vol. 2019,35. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 41960
Stolzenburg, Marc Patrick. Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation, 2019. https://doi.org/10.17619/UNIPB/1-572.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16027
Camberg, Alan Adam, Marius Striewe, Thomas Tröster, F. Bohner, and J. Tölle. “Investigation of Ductility and Fracture Behavior of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” In 5th MATFEM Conference. München: MATFEM, 2019.
LibreCat
2019 | Book | LibreCat-ID: 16795
Striewe, Jan André, Thomas Tröster, Jannik Kowatz, Gerson Meschut, Richard Grothe, and Guido Grundmeier. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16028
Grothe, R., Jan André Striewe, Jannik Kowatz, Guido Grundmeier, Thomas Tröster, and Gerson Meschut. “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” 2019.
LibreCat
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg, Alan Adam, Thomas Tröster, Nikolay Sotirov, Jörn Tölle, and Friedrich Bohner. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” In Materials Science and Engineering (MSE) Congress 2018. Darmstadt, 2018.
LibreCat
2018 | Misc | LibreCat-ID: 6594
Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 15876
Camberg, Alan Adam, Katja Engelkemeier, Jan Dietrich, and Thomas Heggemann. “Top-down Design of Tailored Fiber-Metal Laminates.” Lightweight Design Worldwide 11, no. 2 (2018): 24–29. https://doi.org/10.1007/s41777-018-0004-1.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski, Nathalie, Junhe Lian, Alan Adam Camberg, Thomas Tröster, Sebastian Münstermann, Wolfgang Bleck, Helmut Gese, and Helmut Richter. “Forming Limit Curves of DP600 Determined in High-Speed Nakajima Tests and Predicted by Two Different Strain-Rate-Sensitive Models,” 2018. https://doi.org/10.1063/1.5035024.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15977
Tasdemirci, Alper, Emine Fulya Akbulut Irmak, Erkan Guzel, Firat Tuzgel, Atacan Yucesoy, Selim Sahin, and Mustafa Guden. “Crushing Behavior and Energy Absorption Performance of a Bio-Inspired Metallic Structure: Experimental and Numerical Study.” Thin-Walled Structures, 2018, 547–55. https://doi.org/10.1016/j.tws.2018.07.051.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16034
Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.” In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16040
Wang, Z., and Thomas Tröster. “Influences of Interface on the Adhesion and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted Resin Transfer Moulding,” 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16042 |
Triebus, Marcel, Thomas Tröster, Alan Adam Camberg, S. Bienia, and K. Dröder. “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.” In 15. Deutsches LS-Dyna Forum, 2018.
LibreCat
| Download (ext.)
2018 | Conference Paper | LibreCat-ID: 16043 |
Camberg, Alan Adam, Thomas Tröster, A. Schneidt , N. Sotirov , and J. Tölle. “The Influence of Damage Accumulation on Failure Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal Sheet Metal Forming.” In 15. Deutsches LS-Dyna Forum, 2018.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 16045
Camberg, Alan Adam. “Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von Gesamtfahrzeugsimulationen.” Carbon Composites Magazin, no. 2 (2018): 15–16.
LibreCat
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer, Swetlana, and Thomas Tröster. “Holz als Werkstoff im Automobil,” 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16057
Wang, Z., and Thomas Tröster. “Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess,” 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 13439
Camberg, Alan Adam, F Bohner, J Tölle, A Schneidt, S Meiners, and Thomas Tröster. “Formability Enhancement of EN AW-5182 H18 Aluminum Alloy Sheet Metal Parts in a Flash Forming Process: Testing, Calibration and Evaluation of Fracture Models.” IOP Conference Series: Materials Science and Engineering, 2018. https://doi.org/10.1088/1757-899x/418/1/012018.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16118
Schumacher, Christian, Volker Schöppner, and Stefan Gnaase. “Processing Short Fiber-Reinforced Polymers in the Fused Deposition Modeling Process.” In Proceedings of the 29th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 37573
Niewel, Jörg. Untersuchungen zur induktiven Erwärmung im Warmformprozess . Vol. 2018,31. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16052
Horwath, Ilona, Silvia Dohmeier-Fischer, Nathalie Weiß-Borkowski, and Thomas Tröster. “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.” In INTED2018 Proceedings, 2018. https://doi.org/10.21125/inted.2018.1651.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko Schaper, M. Peters, M. Burns, F. Hengsbach, and A. Altmann. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” In Contributed Papers from MS&T17, 2018. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski, Nathalie, Ilona Horwath, A. Berscheid, Silvia Dohmeier-Fischer, and Thomas Tröster. “NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH.” In INTED2018 Proceedings, 2018. https://doi.org/10.21125/inted.2018.1298.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16035
Striewe, Jan André, R. Grothe, Jannik Kowatz, Thomas Tröster, Guido Grundmeier, and Gerson Meschut. “Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness,” 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, Thomas Tröster, Thomas Heggemann, H. Homberg, Mirko Schaper, J. Dietrich, Wolfgang Bremser, et al. “LHYBS – Lightweight Design by Novel Hybrid Materials,” 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., Z. Wang, Thomas Tröster, and Mirko Schaper. “Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM,” 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, Mathias Bobbert, Christian Dammann, Zheng Wang, Thomas Tröster, Rolf Mahnken, Gerson Meschut, and Mirko Schaper. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, 173–85. https://doi.org/10.1016/j.compositesb.2018.05.030.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 6559
Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic Measurement Applications.” In Proceedings of Meetings on Acoustics, 030004. Honolulu, 2017. https://doi.org/10.1121/2.0000688.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas Tröster. “Investigation of Geometrical Discontinuities in Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating,” 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas Tröster. “Effects of Holes in Blanks for Press Hardening Process Due to Induction Heating,” 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 15941
Reuter, Corin, Kim-Henning Sauerland, and Thomas Tröster. “Experimental and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.” Composite Structures, 2017, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15942
Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures 117 (2017): 1–9. https://doi.org/10.1016/j.tws.2017.03.034.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15944
Striewe, Jan André, Corin Reuter, Kim-Henning Sauerland, and Thomas Tröster. “Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.” Thin-Walled Structures, 2017, 501–8. https://doi.org/10.1016/j.tws.2017.11.011.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski, Nathalie, Juhne Lian, Thorsten Marten, Thomas Tröster, Sebastian Münstermann, and Wolfgang Bleck. “Forming Limit Curves Determined in High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” In Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017. https://doi.org/10.1063/1.5007961.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 16062
Schweizer, Swetlana, Anna Becker-Staines, and Thomas Tröster. “Separation of Hybrid Structures for the Reclaim of Their Single Components.” Key Engineering Materials, 2017, 568–75. https://doi.org/10.4028/www.scientific.net/kem.742.568.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16065
Kutz, P., Z. Wang, M. Ellouz, T. Kordisch, and Thomas Tröster. “Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,” 2017.
LibreCat
2017 | Dissertation | LibreCat-ID: 16070
Weiß Borkowski, Nathalie . Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16071
Wang, Z., P. Kutz, and Thomas Tröster. “Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,” 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten. “Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken. “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates,” 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive Fertigung,” 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in der additiven Fertigung,” 2017.
LibreCat
2017 | Dissertation | LibreCat-ID: 37564
Frantz, Meike Maria. Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen. Vol. 2017,25. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, Peter Koppa, F. Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2017. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat
| DOI
2017 | Dissertation | LibreCat-ID: 16068
Marten, Thorsten. Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag, 2017.
LibreCat