Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
250 Publications
2021 | Conference Paper | LibreCat-ID: 28440 | 
Triebus M, Reitz A, Grydin O, et al. Forming Simulation of Tailored Press Hardened Parts. In: 13th European LS-DYNA Conference 2021. ; 2021.
LibreCat
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
Tröster T, Pfeifer F, Nacke B, Dietrich A. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Vol P1038. Forschungsvereinigung Stahlanwendung e.V.; 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh SR, Wu T, Tröster T, Niendorf T. Development of a submodel technique for FFT-based solvers in micromechanical analysis. In: ; 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 20857
Camberg AA, Tröster T, Latuske C. Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing. In: Springer; 2021. doi:https://doi.org/10.1007/978-3-662-62924-6_28
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20858
Camberg AA, Tröster T, Wingenbach N, Hielscher C, Grenz J. A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design. In: Springer; 2021. doi:https://doi.org/10.1007/978-3-662-62924-6_30
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22518 |
Triebus M, Gierse J, Marten T, Tröster T. A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012052
LibreCat
| DOI
| Download (ext.)
2021 | Report | LibreCat-ID: 29807
Linnig C, Tröster T. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Deutsche Bundesstiftung Umwelt (DBU); 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24131
Wu T, Tinkloh SR, Tröster T, Zinn W, Niendorf T. Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components. Metals. Published online 2021. doi:10.3390/met11020335
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh SR, Wu T, Tröster T, Niendorf T. The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis. Metals. Published online 2021. doi:10.3390/met11010156
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24130
Magnier A, Wu T, Tinkloh SR, Tröster T, Scholtes B, Niendorf T. On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites. Polymer Testing. Published online 2021. doi:10.1016/j.polymertesting.2021.107146
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 21726 |
Triebus M, Tröster T. HyOpt - Optimization-Based Development of Hybrid Materials. In: 9th NRW Nano Conference - Innovations in Materials and Applications. ; 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 33895
Camberg AA, Erhart T, Tröster T. A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials. 2021;14(17). doi:10.3390/ma14175106
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 37579
Camberg AA. Festigkeitssteigerung von Aluminiumblechformteilen der 5000-Serie durch Erweiterung der Formgebungsgrenzen stark kaltverfestigter Ausgangswerkstoffe. Vol 2021,52. Shaker Verlag; 2021. doi:10.2370/9783844082715
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 37586
Huber J. Beitrag zur Reduzierung der Fehlerhäufigkeit bei der Online-Lackierung von SMC-Außenhautbauteilen. Vol 2021,50. Shaker Verlag; 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 37584
Pöhler S. Konzeptionierung und Auslegung eines Vorderachsträgers in hybrider Leichtbauweise im C-Segment. Vol 2021,49. Shaker Verlag; 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24541
Steinfelder C, Martin S, Brosius A, Tröster T. Load Path Transmission in Joining Elements. Key Engineering Materials. Published online 2021:73-80. doi:10.4028/www.scientific.net/kem.883.73
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24548 |
Martin S, Tröster T. Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.3801
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister T, Martin S, Marten T, Tröster T. Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. In: ; 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24009
Camberg AA, Erhart T, Tröster T. A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials. Published online 2021. doi:10.3390/ma14175106
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23898
Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology. Published online 2021. doi:10.1016/j.jmatprotec.2021.117183
LibreCat
| DOI
2020 | Dissertation | LibreCat-ID: 21209
Ahlers D. Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V . Vol 19. Shaker; 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 17812
Hielscher C, Grenz J, Camberg AA, Wingenbach N. Ansatz zur effizienteren Auslegung von Hybridbauteilen. ATZ - Automobiltechnische Zeitschrift. 2020:60-65. doi:10.1007/s35148-020-0284-8
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 17813
Hielscher C, Grenz J, Camberg AA, Wingenbach N. Approach to More Efficient Design of Hybrid Components. ATZ worldwide. 2020:58-61. doi:10.1007/s38311-020-0267-0
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 20843
Wu T, Tinkloh SR, Tröster T, Zinn W. Residual stress measurement in GFRP/steel hybrid components. In: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. ; 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20854 |
Camberg AA, Tröster T. A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter. 2020. doi:10.1088/1757-899X/967/1/012077
LibreCat
| DOI
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 20856 |
Camberg AA, Erhart T, Tröster T. Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework. In: ; 2020. doi:10.13140/RG.2.2.23924.17288
LibreCat
| DOI
| Download (ext.)
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer S, Akbulut Irmak EF, Tröster T. Wood-based materials as a sustainable alternative for future car body construction. In: Automotive Circle; 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 16939 |
Triebus M, Tröster T. A Holistic Approach to Optimization-Based Design of Hybrid Materials. In: Proceedings 4th International Conference Hybrid Materials & Structures. ; 2020.
LibreCat
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 15490 |
Claes L, Baumhögger E, Rüther T, Gierse J, Tröster T, Henning B. Reduction of systematic measurement deviation in acoustic absorption measurement systems. In: Fortschritte Der Akustik - DAGA 2020. ; 2020:1077-1080.
LibreCat
| Files available
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh SR, Wu T, Tröster T, Niendorf T. Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids. In: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. ; 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 20842
Wu T, Tinkloh SR, Tröster T, Zinn W, Niendorf T. Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method. Journal of Composites Science. Published online 2020. doi:10.3390/jcs4030143
LibreCat
| DOI
2020 | Dissertation | LibreCat-ID: 37585
Huxol A. Beitrag zur Qualitätssicherung in der additiven Fertigung individueller Produkte aus CoCr-Legierungen. Vol 2020,42. Shaker Verlag; 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh SR, Wu T, Tröster T, Niendorf T. A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. Composite Structures. 2020;238. doi:10.1016/j.compstruct.2020.111926
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar D, Stallmeister T, Wang Z, Tröster T. MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED. In: Hausmann JM, Siebert M, von Hehl A, Weidenmann KA, eds. Hybrid 2020 Materials and Structures. ; 2020:167-172.
LibreCat
| Files available
2019 | Report | LibreCat-ID: 21210
Ahlers D, Tröster T. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn; 2019. doi:https://doi.org/10.2314/KXP:1695591887
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer F, Dietrich A, Marten T, Tröster T, Nacke B. Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process. In: Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel. ; 2019:585-593.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16794
Striewe JA, Thomas R, Fischer F, Wiens T, Tröster T. Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung. In: Sankt Augustin: DGM-Inventum GmbH ; 2019.
LibreCat
2019 | Misc | LibreCat-ID: 16825
Ahlers D, Tröster T. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. Maastricht: EuroPM; 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16826
Camberg AA, Hielscher C. A holistic approach to the lightweight design of tailored structural components using the example of a hybrid A-pillar. In: Aachen Body Engineering Days 2019. ; 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16827
Camberg AA, Tröster T. Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks. In: 26. Sächsische Fachtagung Umformtechnik. ; 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh SR, Wu T, Tröster T, Niendorf T. A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures. In: ; 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 15875
Camberg AA, Tröster T, Bohner F, Tölle J. Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. IOP Conference Series: Materials Science and Engineering. 2019;651:012057. doi:10.1088/1757-899X/651/1/012057
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak EF, Tröster T. Fracture prediction of additively manufactured AlSi10Mg materials. Procedia Structural Integrity. 2019:190-197. doi:10.1016/j.prostr.2019.12.101
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak EF, Hanses J, Schweizer S, Tröster T. Modeling the Energy Absorption Characteristics of Wood Crash Elements. In: ; 2019.
LibreCat
2019 | Report | LibreCat-ID: 16029
Marten T, Tröster T. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH; 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16030
Triebus M, Bienia S, Marten T, Tröster T, Dröder K. Press Hardening Integrated Structuring for Hybrid Components. In: Verlag Wissenschaftliche Scripten; 2019.
LibreCat
2019 | Book Chapter | LibreCat-ID: 13436
Camberg AA, Stratmann I, Tröster T. TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In: Technologies for Economical and Functional Lightweight Design. Berlin, Heidelberg; 2019. doi:10.1007/978-3-662-58206-0_12
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister T, Chalicheemalapalli Jayasankar D, Wang Z, Tröster T. Self-sealing tool concept for RTM-processes. In: ; 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister T, Chalicheemalapalli Jayasankar D, Wang Z, Tröster T. Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. In: ; 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 41958
Opdemom H. Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen. Vol 2019,35. Shaker Verlag; 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 41960
Stolzenburg MP. Experimental Basis for an Orthotropic Failure Model for Application in Crash Simulation.; 2019. doi:10.17619/UNIPB/1-572
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16027
Camberg AA, Striewe M, Tröster T, Bohner F, Tölle J. Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions. In: 5th MATFEM Conference. MATFEM; 2019.
LibreCat
2019 | Book | LibreCat-ID: 16795
Striewe JA, Tröster T, Kowatz J, Meschut G, Grothe R, Grundmeier G. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung; 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16028
Grothe R, Striewe JA, Kowatz J, Grundmeier G, Tröster T, Meschut G. Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. In: ; 2019.
LibreCat
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg AA, Tröster T, Sotirov N, Tölle J, Bohner F. Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions. In: Materials Science and Engineering (MSE) Congress 2018. Darmstadt; 2018.
LibreCat
2018 | Misc | LibreCat-ID: 6594
Claes L, Zeipert H, Koppa P, Tröster T, Henning B. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck; 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 15876
Camberg AA, Engelkemeier K, Dietrich J, Heggemann T. Top-down design of tailored fiber-metal laminates. Lightweight Design worldwide. 2018;11(2):24-29. doi:10.1007/s41777-018-0004-1
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski N, Lian J, Camberg AA, et al. Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models. In: ; 2018. doi:10.1063/1.5035024
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15977
Tasdemirci A, Akbulut Irmak EF, Guzel E, et al. Crushing behavior and energy absorption performance of a bio-inspired metallic structure: Experimental and numerical study. Thin-Walled Structures. 2018:547-555. doi:10.1016/j.tws.2018.07.051
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16034
Camberg AA, Tröster T. Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche Gesellschaft für Materialkunde e.V.; 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers D, Tröster T. Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. In: ; 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16040
Wang Z, Tröster T. Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. In: ; 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16042 |
Triebus M, Tröster T, Camberg AA, Bienia S, Dröder K. Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In: 15. Deutsches LS-Dyna Forum. ; 2018.
LibreCat
| Download (ext.)
2018 | Conference Paper | LibreCat-ID: 16043 |
Camberg AA, Tröster T, Schneidt A, Sotirov N, Tölle J. The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In: 15. Deutsches LS-Dyna Forum. ; 2018.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 16045
Camberg AA. Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von Gesamtfahrzeugsimulationen. Carbon Composites Magazin. 2018;(2):15-16.
LibreCat
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer S, Tröster T. Holz als Werkstoff im Automobil. In: ; 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16057
Wang Z, Tröster T. Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. In: ; 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 13439
Camberg AA, Bohner F, Tölle J, Schneidt A, Meiners S, Tröster T. Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models. IOP Conference Series: Materials Science and Engineering. 2018. doi:10.1088/1757-899x/418/1/012018
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16118
Schumacher C, Schöppner V, Gnaase S. Processing Short Fiber-reinforced Polymers in the Fused Deposition Modeling Process. In: Proceedings of the 29th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. ; 2018.
LibreCat
2018 | Dissertation | LibreCat-ID: 37573
Niewel J. Untersuchungen zur induktiven Erwärmung im Warmformprozess . Vol 2018,31. Shaker Verlag; 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16052
Horwath I, Dohmeier-Fischer S, Weiß-Borkowski N, Tröster T. FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING. In: INTED2018 Proceedings. ; 2018. doi:10.21125/inted.2018.1651
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers D, Tröster T, Hermann S, et al. Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. In: Contributed Papers from MS&T17. ; 2018. doi:10.7449/2018mst/2018/mst_2018_117_124
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski N, Horwath I, Berscheid A, Dohmeier-Fischer S, Tröster T. NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH. In: INTED2018 Proceedings. ; 2018. doi:10.21125/inted.2018.1298
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16035
Striewe JA, Grothe R, Kowatz J, Tröster T, Grundmeier G, Meschut G. Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness. In: ; 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16050
Camberg AA, Tröster T, Heggemann T, et al. LHYBS – Lightweight Design by Novel Hybrid Materials. In: ; 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16055
Zinn C, Wang Z, Tröster T, Schaper M. Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM. In: ; 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15958
Zinn C, Bobbert M, Dammann C, et al. Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering. Published online 2018:173-185. doi:10.1016/j.compositesb.2018.05.030
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 6559
Claes L, Zeipert H, Koppa P, Tröster T, Henning B. Additively manufactured acoustic diffuser structures for ultrasonic measurement applications. In: Proceedings of Meetings on Acoustics. Honolulu; 2017:030004. doi:10.1121/2.0000688
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating. In: ; 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Effects of Holes in Blanks for Press Hardening Process due to Induction Heating. In: ; 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 15941
Reuter C, Sauerland K-H, Tröster T. Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading. Composite Structures. 2017:33-44. doi:10.1016/j.compstruct.2017.04.052
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15942
Reuter C, Tröster T. Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures. 2017;117:1-9. doi:10.1016/j.tws.2017.03.034
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15944
Striewe JA, Reuter C, Sauerland K-H, Tröster T. Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures. 2017:501-508. doi:10.1016/j.tws.2017.11.011
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski N, Lian J, Marten T, Tröster T, Münstermann S, Bleck W. Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model. In: Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. ; 2017. doi:10.1063/1.5007961
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 16062
Schweizer S, Becker-Staines A, Tröster T. Separation of Hybrid Structures for the Reclaim of their Single Components. Key Engineering Materials. 2017:568-575. doi:10.4028/www.scientific.net/kem.742.568
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers D, Tröster T. Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. In: ; 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16065
Kutz P, Wang Z, Ellouz M, Kordisch T, Tröster T. Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. In: ; 2017.
LibreCat
2017 | Dissertation | LibreCat-ID: 16070
Weiß Borkowski N. Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22; 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16071
Wang Z, Kutz P, Tröster T. Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. In: ; 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. In: ; 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. In: ; 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In: ; 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung. In: ; 2017.
LibreCat
2017 | Dissertation | LibreCat-ID: 37564
Frantz MM. Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen. Vol 2017,25. Shaker Verlag; 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers D, Koppa P, Hengsbach F, et al. Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. In: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. ; 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. Published online 2017:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites. Published online 2017. doi:10.1504/ijautoc.2016.10005303
LibreCat
| DOI
2017 | Dissertation | LibreCat-ID: 16068
Marten T. Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag; 2017.
LibreCat