Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
300 Publications
2019 | Conference Paper | LibreCat-ID: 22144
Risse, L., S.C. Woodcock, G. Kullmer, B. Schramm, and H.A. Richard. “Reconstruction of a Defective Finger Joint Surface and Development of an Adapted External Fixator.” In Lecture Notes in Computational Vision and Biomechanics , 230–38, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22198
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Methodik Zur Qualifizierung Des Lasersinter Prozesses Für Die Serienfertigung.” In Proceedings of the 16th Rapid.Tech Conference, 2019. https://doi.org/10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22442
Künneke, Thomas, Tobias Lieneke, Stefan Lammers, and Detmar Zimmer. “Design Guidelines for Post-Processing of Laser Beam Melting in Context of Support Structures.” In Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 137–40, 2019. https://www.euspen.eu/knowledge-base/AM19127.pdf.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22443
Lieneke, Tobias, Thomas Künneke, Fabian Schlenker, Vera Denzer, and Detmar Zimmer. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.” In Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019. https://www.euspen.eu/knowledge-base/AM19129.pdf.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22444
Künneke, Thomas, and Detmar Zimmer. “Schall Mittels Pulver Dämpfen.” Konstruktionspraxis 6 (2019): 24–26.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22000
Gräßler, I., and C. Oleff. “Risikoorientierte Analyse Und Handhabung von Anforderungsänderungen.” In Design for X - Beiträge Zum 30. DfX-Symposium , 30:49–60, 2019. https://doi.org/ 10.35199/dfx2019.5.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22001
Gräßler, I., C. Oleff, and P. Scholle. “Priorisierung von Anforderungen Für Die Entwicklung Mechatronischer Systeme.” In Fachtagung Mechatronik 2019 Paderborn, S. 1-6, 2019. https://doi.org/ 10.17619/UNIPB/1-791.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22002
Gräßler, I., H. Thiele, C. Oleff, P. Scholle, and V. Schulze. “Priorisierung von Anforderungen Für Die Entwicklung Mechatronischer Systeme.” In International Conference on Engineering Design (ICED19), 1265–74, 2019. https://doi.org/10.17619/UNIPB/1-791.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22022
Moritzer, Elmar, Julian Wächter, and M. Elsner. “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength.” In 30th Annual International Solid Freeform Fabrication Symposium, 30:856–63, 2019. http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat
| DOI
2019 | Misc | LibreCat-ID: 16825
Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM 2019 Congress & Exhibition – SIS: Optimising the Properties of AM Parts Using Hot Isostatic Pressing. Maastricht: EuroPM, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 22047
Moritzer, Elmar, André Hirsch, H.P. Heim, C. Cherif, and W. Truemper. “Plastic Droplet Welding: Bond Strength between Plastic Freeforming Structures and Continuous Fiber-Reinforced Thermoplastic Composites.” Welding in the World 63 (2019): 867–73. https://doi.org/10.1007/s40194-019-00714-3.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22028
Moritzer, Elmar, André Hirsch, and Franziska Isabelle Bürenhaus. “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures.” In AIP Conference Proceedings, Vol. 2065. AIP Publishing, 2019. https://doi.org/10.1063/1.5088314.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22027
Schöppner, Volker, C. Schumacher, and C. Fels. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.” In AIP Conference Proceedings. AIP Publishing, 2019. https://doi.org/10.1063/1.5088315.
LibreCat
| DOI
2019 | Book | LibreCat-ID: 22026
Moritzer, Elmar, André Hirsch, and S. Paulus. Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung. Springer Vieweg, 2019. https://doi.org/10.1007/978-3-658-27412-2.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 36846
Kruse, Anne, and Michael Mummert. “Mit 3D-Druck umfassende Teilhabe möglich machen .” Werkstatt:Dialog, no. 4 (2019): 34–35.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22202
Klippstein, Sven Helge, Anne Duchting, Thomas Reiher, F. Hengsbach, Dennis Menge, and Hans-Joachim Schmid. “Devolopment, Production and Post-Processing of a Topology Optimized Aircraft Bracket .” In 30th Annual International Solid Freeform Fabrication Symposium, 30:1932–45, 2019.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 22441
Lammers, Stefan, Johannes Tominski, and Detmar Zimmer. “Guidelines for Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology Optimization.” In II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 174–85, 2019. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22041
Moritzer, Elmar, André Hirsch, and Felix Hecker. “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components.” In 30th Annual International Solid Freeform Fabrication Symposium, 30:705–14, 2019. http://dx.doi.org/10.26153/tsw/17308.
LibreCat
| DOI
2018 | Report | LibreCat-ID: 23736
Taube, Alexander, Stefan Lammers, Stefan Urbanek, and Rafael Mrozek. Weichmagnetische Werkstoffe Für Die Additive Fertigung von E-Motoren. Vol. Heft 1286. FVA Abschlussbericht . Forschungsvereinigung Antriebstechnik e.V., 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22116
Schafran, T., B. Schramm, and L. Risse. “Additive Fertigung in Der Modernen Orthopädietechnik - Anwendung Und Forschungsansätze -.” In DVM - AK Implantate Und Biostrukturen, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 22117
Schramm, B., L. Risse, J.P. Brüggemann, H.A. Richard, and G. Kullmer. “Additive Manufacturing for Medical Applications.” Journal of 3D Printing in Medicine 2 (2018).
LibreCat
2018 | Conference Paper | LibreCat-ID: 22118
Risse, L., B. Schramm, and T. Schafran. “Welche Ingenieurstechnischen Perspektiven Bietet Die Versorgung Durch Additiv Gefertigte Orthesen?” In PreDay AK Fußchirurgie, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22120
Kummert, C., and H.-J. Schmid. “The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering PA613 Build Part Properties.” In 29th Annual International Solid Freeform Fabrication Symposium, Vol. 29, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22122
Brüggemann, J.P., L. Risse, A. Grübel, H.A. Richard, and G. Kullmer. “Validierung Der Strukturmechanischen Funktionsfähigkeit Durch Experimentelle Bauteilprüfungen Additiv Gefertigter Leichtbaustrukturen.” In DVM - Bericht 250, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 250:89–98, 2018. https://doi.org/10.1007/978-3-658-27412-2_1.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22125
Dsuban, A., J. Lohn, J.P. Brüggemann, and G. Kullmer. “Entwicklung Und Umsetzung Eines Qualitätssicherungskonzeptes Für Die Additive Fertigung.” In DVM - Bericht 403, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 403:110–110, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22126
Brüggemann, J.P., L. Risse, H.A. Richard, and G. Kullmer. “Entwicklung von Optimierungsstrategien Unter Ausnutzung Des Potentials Der Additiven Fer-Tigung.” In DVM - Bericht 403, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 403:11–21, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22139
Risse, L., B. Schramm, J.P. Brüggemann, S.C. Woodcock, G. Kullmer, and H.A. Richard. “CAE-Gestützte Optimierung Eines Hüftimplantats Durch Ausnutzung Der Potentiale Additiver Fertigungsverfahren.” In DVM-Bericht 403, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 403:89–100, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22145
Joy, T.D., J.P. Brüggemann, and G. Kullmer. “Crack Growth Simulation with Adapcrack3D in 3D Structures under the Influence of Temperature.” In Procedia Structural Integrity, in press, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22147
Brüggemann, J.P., L. Risse, G. Kullmer, B. Schramm, and H.A. Richard. “Optimization of the Fracture Mechanical Properties of Additively Manufactured EN AW-7075.” In Procedia Structural Integrity, in press, 2018. https://doi.org/10.1016/j.prostr.2018.12.052.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22148
Brüggemann, J.P., L. Risse, G. Kullmer, and H.A. Richard. “Fracture Mechanical Investigations on Selective Laser Melted TiAl6V4.” In Procedia Structural Integrity, in press, 2018. https://doi.org/10.1016/j.prostr.2018.12.053.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22150
Risse, L., B. Schramm, J.P. Brüggemann, G. Kullmer, and H.A. Richard. “Entwicklung von Steifigkeitsangepassten, Lasergeschmolzenen Kurzschaft-Hüftendoprothesen.” In Proceedings of the 15th Rapid.Tech Conference, 405–17, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22183 | 
Menge, Dennis, Patrick Delfs, Marcel Töws, and Hans-Joachim Schmid. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:687–97, 2018.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 22196
Kummert, Christina, Stefan Josupeit, and Hans-Joachim Schmid. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.” Journal of Minerals, Metals and Materials Society 70, no. 3 (2018): 425–30. https://doi.org/10.1007/s11837-017-2658-2.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22430
Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22433
Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.” In 14th PERMAS Users’ Conference, Vol. 14, 2018. https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22434
Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer. “Method for a Software-Based Design Check of Additively Manufactured Components.” In 29th Annual International Solid Freeform Fabrication Symposium, Vol. 29, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22435
Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag GmbH & Co. KG, 2018. https://doi.org/10.3139/9783446458123.008.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22436
Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113, no. 11 (2018): 742–45. https://doi.org/10.3139/104.112005.
LibreCat
| DOI
2018 | Book | LibreCat-ID: 22506
Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and Detmar Zimmer. Elektromechanische Antriebe. Carl Hanser Verlag, 2018. https://doi.org/10.3139/9783446456198.009.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21696
Büsching, J., C. Lindemann, U. Jahnke, A. Kruse, and R. Koch. “Technology Integration into Existing Companies.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:14–31, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21991
Graessler, Iris, Philipp Scholle, Julian Hentze, and Christian Oleff. “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS.” In Proceedings of the DESIGN 2018 15th International Design Conference, 2018. https://doi.org/10.21278/idc.2018.0298.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21998
Gräßler, I., P. Scholle, J. Hentze, and C. Oleff. “Semi-Automatized Assessment of Requirement Interrelations.” In 15th International Design Conference, 15:S. 325-334, 2018. https://doi.org/10.21278/idc.2018.0298.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 21999
Gräßler, I., C. Oleff, and P. Scholle. “Methode Zur Bewertung von Anforderungsänderungen Additiv Gefertigter Produkte.” In Design for X - Beiträge Zum 29. DfX-Symposium, 29:333–44, 2018. https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22020
Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., M. Köhler, Tobias Lieneke, Detmar Zimmer, and Volker Schöppner. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018): 83–88.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
Knoop, F., Tobias Lieneke, Volker Schöppner, and Detmar Zimmer. “Additive Fertigung Nach Maß.” Kunststoffe 6 (2018): 70–73. https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Misc | LibreCat-ID: 6594
Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22046
Knoop, F., and Volker Schöppner. “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process.” In SPE ANTEC 2018, Vol. 1. Society of Plastics Engineers , 2018. https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22438
Lammers, Stefan, Johannes Tominski, Sebastian Magerkohl, Thomas Künneke, Tobias Lieneke, and Detmar Zimmer. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.” In Proceedings of the 15th Rapid.Tech Conference, 81–94, 2018. https://doi.org/10.3139/9783446458123.005.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22431
Lammers, Stefan, Johannes Tominski, Sebastian Magerkohl, Tobias Lieneke, Thomas Künneke, and Detmar Zimmer. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.” In 29th Annual International Solid Freeform Fabrication Symposium, Vol. 29, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko Schaper, M. Peters, M. Burns, F. Hengsbach, and A. Altmann. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” In Contributed Papers from MS&T17, 2018. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124.
LibreCat
| DOI
2017 | Book Chapter | LibreCat-ID: 23759
Menge, Dennis, Stefan Josupeit, Patrick Delfs, and Hans-Joachim Schmid. “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen.” In Additive Fertigung von Bauteilen und Strukturen, edited by Hans Albert Richard, Britta Schramm, and Thomas Zipsner, 105–20. Wiesbaden: Springer Vieweg, 2017. https://doi.org/10.1007/978-3-658-17780-5.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22110
Taube, A. “Mechanische Und Mikrostrukturellen Eigenschaften Additiv Hergestellter Gitterstrukturen .” In Hannover Messe Industrie, 2017, Hannover, 2017.
LibreCat
2017 | Book | LibreCat-ID: 22112
Brüggemann, J.P., L. Risse, A. Riemer, W. Reschetnik, G. Kullmer, and H.A. Richard. Entwicklung von Fahrradtretkurbelsystemen Mittels Additiver Fertigung. Additive Fertigung von Bauteilen Und Strukturen – Neue Erkenntnisse Und Praxisbeispiele, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22119
Bauer, B., W. Reschetnik, G. Kullmer, and H.A. Richard. “Methods for Crack Length Measurement for the Determination of Fracture Mechanical Parameters of Additive Manufactured Plastics.” In 14th International Conference on Fracture, Vol. 14, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22127
Bauer, B., W. Reschetnik, G. Kullmer, and H.A. Richard. “Risslängenmessung in Additiv Gefertigten Kunststoffproben Auf Basis von Steifigkeitsänderungen Infolge Ermüdungswachstum.” In DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, 77–88, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22131
Reschetnik, W., J.P. Brüggemann, G. Kullmer, and H.A. Richard. “Bruchmechanische Charakterisierung von Laserstrahlgeschmolzenen Werkstoffen.” In DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 147–56, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22133
Brüggemann, J.P., W. Reschetnik, M.E. Aydinöz, H.A. Richard, G. Kullmer, K.P. Hoyer, and M. Schaper. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenen Aluminium 7075.” In DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 11–20, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22134
Risse, L., J.P. Brüggemann, B. Schramm, G. Kullmer, and H.A. Richard. “Strukturoptimierung von Kurzschaft-Hüftendoprothesen Durch Den Einsatz Der Additiven Fertigung.” In DVM - Tagung - Zuverlässigkeit von Implataten Und Biostrukturen, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22135
Brüggemann, J.P., L. Risse, H.A. Richard, and G. Kullmer. “Vergleich Zweier Optimierungsstrategien Am Beispiel Additiv Gefertigter Rennradvorbauten.” In DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 49–66, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22136
Bauer, B., W. Reschetnik, G. Kullmer, and H.A. Richard. “Konzepte Zur Risslängenmessung an Additive Gefertigten Kunststoffen .” In DVM Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, 21–30, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22151
Brüggemann, J.P., L. Risse, B. Schramm, and H.A. Richard. “Entwicklung Einer Additiv Gefertigten Fußorthese.” In Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 26–37, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22153
Bauer, B., W. Reschetnik, G. Kullmer, and H.A. Richard. “Crack Length Measurement of Additive Manufactured Plastics Based on the Current Potential Drop Method.” In Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22165
Wiesener, M., K. Peters, A. Taube, A. Keller, K.P. Hoyer, T. Niendorf, and G. Grundmeier. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared by Selective Laser Melting.” Materials and Corrosion 68, no. 10 (2017): 1028–36. https://doi.org/10.1002/maco.201709478.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22195
Josupeit, Stefan, and Hans-Joachim Schmid. “Experimental Analysis and Modeling of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual Thermal Histories.” Journal of Applied Polymer Science 134, no. 42 (2017). https://doi.org/10.1002/app.45435.
LibreCat
| DOI
2017 | Book | LibreCat-ID: 22419
Künneke, Thomas, and Detmar Zimmer. Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017. https://doi.org/10.1007/978-3-658-17780-5.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22420
Lammers, Stefan, Francesco Quattrone, Rafael Mrozek, Detmar Zimmer, Hans-Joachim Schmid, Bernd Ponick, and Michael Hoffmann. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” In Proceedings of the 14th Rapid.Tech Conference, 80–93. Hanser Verlag, 2017. https://doi.org/10.3139/9783446454606.006.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, Tobias, Guido Adam, Stefan Josupeit, Patrick Delfs, and Detmar Zimmer. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.” In Proceedings of the 14th Rapid.Tech Conference, 327–44. Hanser Verlag, 2017. https://doi.org/10.3139/9783446454606.024 .
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22422
Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling.” In Inside 3D Printing 2017, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22425
Lieneke, Tobias, Vera Denzer, and Detmar Zimmer. “Geometrische Toleranzen Für Additive Fertigungsverfahren.” In 3. Summer School Toleranzmangement 2017, Vol. 3, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22426
Eschner, Niclas, Robin Kopf, Tobias Lieneke, Thomas Künneke, Dietrich Berger, Benjamin Häfner, Gisela Lanza, and Detmar Zimmer. “Kombination Etablierter Und Additiver Fertigung: Wirtschaftlicher Einsatz Des Laser-Strahlschmelzens (LBM) Durch Die Kombination Mit Etablierten Fertigungsverfahren in Einer Prozesskette.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 112, no. 7–8 (2017): 469–72. https://doi.org/10.3139/104.111751.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21690
Deppe, G., R. Koch, and M. Kaesberg. “Rational Decision-Making for the Beneficial Application of Additive Manufacturing.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:2597–2611, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21691
Reiher, T., S. Vogelsang, and R. Koch. “Computer Integration for Geometry Generation for Product Optimization with Additive Manufacturing.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:903–21, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21692
Kruse, A., T. Reiher, and R. Koch. “Integrating AM into Existing Companies - Selection of Existing Parts for Increase of Acceptance.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:2575–84, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21693
Jahnke, U., R. Koch, and A. T. Oppermann. “Design for Protection: Systematic Approach to Prevent Product Piracy during Product Development Using AM .” In 28th Annual International Solid Freeform Fabrication Symposium, 28:2481–92, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21694
Büsching, J., and R. Koch. “Ramp-Up-Management in Additive Manufacturing – Technology Integration in Existing Business Processes.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:2585–96, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21695
Reiher, T., S. Vogelsang, and R. Koch. “Computer Integration for Geometry Generation for Product Optimization with Additive Manufacturing.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:903–21, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21697
Deppe, G., and C. Lindemann. “Hybrid Manufacturing with Additive Manufacturing.” CECIMO Magazine 17, no. 11 (2017): 28–29. https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21704
Reiher, T., C. Lindemann, U. Jahnke, G. Deppe, and R. Koch. “Holistic Approach for Industrializing AM Technology - from Part Selection to Test and Verification.” Progress in Additive Manufacturing 2 (2017): 43–55. https://doi.org/10.1007/s40964-017-0018-y.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., Tobias Lieneke, and Volker Schöppner. “Reproduzierbarkeit Der Maßhaltigkeit Im Fused Deposition Modeling.” In Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 52–66, 2017. https://doi.org/10.3139/9783446454606.004.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22042
Schumacher, C., Volker Schöppner, and J. Guntermann. “Considering Machine- and Process-Specific Influences to Create Custom-Built Specimens for the Fused Deposition Modeling Process.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:470–84, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22045
Knoop, F., and Volker Schöppner. “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:2757–76, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22049
Schöppner, Volker, C. Schumacher, and J. Guntermann. “Beurteilung Der Schweißnahtfestigkeiten Verschiedener Kunststoffe Im FDM-Prozess.” Jahresmagazin Kunststofftechnik 1, no. 1 (2017): 108–14.
LibreCat
2017 | Conference Paper | LibreCat-ID: 6559
Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic Measurement Applications.” In Proceedings of Meetings on Acoustics, 030004. Honolulu, 2017. https://doi.org/10.1121/2.0000688.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive Fertigung,” 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in der additiven Fertigung,” 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22038
Moritzer, Elmar, André Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A.F. Lasagni. “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems.” Micromachines 8, no. 246 (2017). https://doi.org/10.3390/mi8080246.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22033
Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), 2017, 563–68. https://doi.org/10.1007/s11837-016-2197-2.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22023
Knoop, F., A. Kloke, and Volker Schöppner. “Quality Improvement of FDM Parts by Parameter Optimization .” In 32nd International Conference of the Polymer Processing Society, Vol. 32. American Institute of Physics, 2017. https://doi.org/10.1063/1.5016790.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, Peter Koppa, F. Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
2016 | Dissertation | LibreCat-ID: 24774
Kloke, Agnes. Untersuchung der Werkstoff-, Prozess- und Bauteileigenschaften beim Fused Deposition Modeling Verfahren. Vol. 4. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2016.
LibreCat
| Download (ext.)
2016 | Dissertation | LibreCat-ID: 24897
Leuders, Stefan. Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen. Vol. 5. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Düren Verlag GmbH, 2016.
LibreCat
| Files available
2016 | Dissertation | LibreCat-ID: 26901
Kanagarajah, Pirabagini. Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel 939. Vol. 6. Forschungsberichte des Direct Manufacturing Research Centers, 2016.
LibreCat
2016 | Report | LibreCat-ID: 23737
Lammers, Stefan, Francesco Quattrone, and Rafael Mrozek. Machbarkeitsstudie 3D Druck Elektromotoren. Vol. Nr. 1189. FVA Abschlussbericht . Forschungsvereinigung Antriebstechnik e.V., 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22107
Brüggemann, J.P., W. Reschetnik, H.A. Richard, G. Kullmer, and B. Schramm. “Festigkeits- Und Leichtbauoptimierte Konstruktion Und Auslegung Eines Additiv Gefertigten Fahrradvorbaus.” In Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 290–300, 2016. https://doi.org/10.3139/9783446450608.025.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22109
Reschetnik, W., R. Grylls, B. Bauer, H.A. Richard, and G. Kullmer. “Fatigue Life Manipulation of SLM Parts,” 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22128
Brüggemann, J.P., A. Riemer, W. Reschetnik, M.E. Aydinöz, G. Kullmer, H.A. Richard, and M. Schaper. “Optimierung von Fahrradtretkurbeln Mittels Additiver Fertigung.” In DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 101–12, 2016.
LibreCat