Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
300 Publications
2023 | Conference Paper | LibreCat-ID: 46862 |
Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat
| DOI
| Download (ext.)
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
2022 | Conference Abstract | LibreCat-ID: 30229
Reproducibility in Polymer Laser Sintering
S.H. Klippstein, in: 2022.
LibreCat
S.H. Klippstein, in: 2022.
2022 | Report | LibreCat-ID: 34020
Innovative Leichtbau- und Kühlungskonzepte für elektrische Maschinen durch additive Fertigung (ILuKadd3D)
M. Haase, F. Tasche, M. Bieber, A. Zibart, Innovative Leichtbau- Und Kühlungskonzepte Für Elektrische Maschinen Durch Additive Fertigung (ILuKadd3D), Forschungsvereinigung Antriebstechnik e.V., Frankfurt, 2022.
LibreCat
M. Haase, F. Tasche, M. Bieber, A. Zibart, Innovative Leichtbau- Und Kühlungskonzepte Für Elektrische Maschinen Durch Additive Fertigung (ILuKadd3D), Forschungsvereinigung Antriebstechnik e.V., Frankfurt, 2022.
2022 | Conference Abstract | LibreCat-ID: 33355
Neue Polymerwerkstoffe - Der Schlüssel für die Industrialisierung
S.H. Klippstein, in: 7. AM Forum Berlin, 2022.
LibreCat
S.H. Klippstein, in: 7. AM Forum Berlin, 2022.
2022 | Journal Article | LibreCat-ID: 33859
Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts
E. Moritzer, C.L. Elsner, Macromolecular Symposia 404 (2022).
LibreCat
| DOI
E. Moritzer, C.L. Elsner, Macromolecular Symposia 404 (2022).
2022 | Journal Article | LibreCat-ID: 33861
Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process
E. Moritzer, J. Wächter, Macromolecular Symposia 404 (2022).
LibreCat
| DOI
E. Moritzer, J. Wächter, Macromolecular Symposia 404 (2022).
2022 | Newspaper Article | LibreCat-ID: 33987
Mit Gestaltungsrichtlinien zum Erfolg
E. Moritzer, C.L. Elsner, Kunststoffe 11/2022 (2022).
LibreCat
E. Moritzer, C.L. Elsner, Kunststoffe 11/2022 (2022).
2022 | Journal Article | LibreCat-ID: 33862
Reactive Direct Bonding of Digital Light Process Components
E. Moritzer, C. Driediger, Macromolecular Symposia 404 (2022).
LibreCat
| DOI
E. Moritzer, C. Driediger, Macromolecular Symposia 404 (2022).
2022 | Journal Article | LibreCat-ID: 35729
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
LibreCat
| Download (ext.)
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
2022 | Journal Article | LibreCat-ID: 35724
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
LibreCat
| Download (ext.)
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
2022 | Book Chapter | LibreCat-ID: 34113
Systematic Investigations Concerning Eddy Currents in Additively Manufactured Structures
M. Haase, D. Zimmer, in: Innovative Product Development by Additive Manufacturing 2021, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
M. Haase, D. Zimmer, in: Innovative Product Development by Additive Manufacturing 2021, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 30228
Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.
LibreCat
| DOI
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.
2022 | Conference Paper | LibreCat-ID: 33356 |
Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
LibreCat
| Download (ext.)
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
2022 | Conference Abstract | LibreCat-ID: 31871
Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag)
I. Kletetzka, S.H. Klippstein, in: 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben , Universität Paderborn, 2022.
LibreCat
I. Kletetzka, S.H. Klippstein, in: 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben , Universität Paderborn, 2022.
2022 | Mastersthesis | LibreCat-ID: 43011
Untersuchung und Modellierung der Materialeigenschaften von glaskugelgefüllten, im Lasersinterprozess verarbeiteten Dry-Blends
F.P. Hanselle, Untersuchung Und Modellierung Der Materialeigenschaften von Glaskugelgefüllten, Im Lasersinterprozess Verarbeiteten Dry-Blends, 2022.
LibreCat
F.P. Hanselle, Untersuchung Und Modellierung Der Materialeigenschaften von Glaskugelgefüllten, Im Lasersinterprozess Verarbeiteten Dry-Blends, 2022.
2022 | Mastersthesis | LibreCat-ID: 43010
Oberflächenmodifikation von Glaskugeln zur Verbesserung der Adhäsion im Lasersinterverfahren
M. Kosanke, Oberflächenmodifikation von Glaskugeln Zur Verbesserung Der Adhäsion Im Lasersinterverfahren, Paderborn, 2022.
LibreCat
M. Kosanke, Oberflächenmodifikation von Glaskugeln Zur Verbesserung Der Adhäsion Im Lasersinterverfahren, Paderborn, 2022.
2022 | Mastersthesis | LibreCat-ID: 43007
Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit)
F. Henke, Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit), Paderborn, 2022.
LibreCat
F. Henke, Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit), Paderborn, 2022.
2022 | Mastersthesis | LibreCat-ID: 46858
Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver, 2022.
LibreCat
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver, 2022.
2022 | Bachelorsthesis | LibreCat-ID: 43012
Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft, Paderborn, 2022.
LibreCat
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft, Paderborn, 2022.
2022 | Conference Paper | LibreCat-ID: 33852 |
VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 2011–2018.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 2011–2018.
2022 | Conference Paper | LibreCat-ID: 30220 |
Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
2022 | Conference Paper | LibreCat-ID: 32874 |
Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
2022 | Conference Paper | LibreCat-ID: 50744 |
Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, C. Haefner, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
LibreCat
| Files available
| Download (ext.)
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, C. Haefner, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
2022 | Conference Paper | LibreCat-ID: 33853 |
INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
2021 | Dissertation | LibreCat-ID: 24760
Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, Shaker Verlag GmbH, Düren, 2021.
LibreCat
| Download (ext.)
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, Shaker Verlag GmbH, Düren, 2021.
2021 | Dissertation | LibreCat-ID: 24770
Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, Shaker Verlag, Düren, 2021.
LibreCat
| Download (ext.)
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, Shaker Verlag, Düren, 2021.
2021 | Journal Article | LibreCat-ID: 28017
Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, M. Schaper, Materials (2021).
LibreCat
| Files available
| DOI
| Download (ext.)
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, M. Schaper, Materials (2021).
2021 | Newspaper Article | LibreCat-ID: 24095 |
Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffland NRW report 2021 (2021) 42–43.
LibreCat
| Download (ext.)
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffland NRW report 2021 (2021) 42–43.
2021 | Journal Article | LibreCat-ID: 24168
Einfluss eines beheizten Bauraums auf die Schweißnahtqualität
E. Moritzer, J. Wächter, Plastverarbeiter (2021) 30–32.
LibreCat
E. Moritzer, J. Wächter, Plastverarbeiter (2021) 30–32.
2021 | Newspaper Article | LibreCat-ID: 24556
Kleine Tropfen, große Wirkung
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffe (2021) 88–90.
LibreCat
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffe (2021) 88–90.
2021 | Journal Article | LibreCat-ID: 24589
Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry
E. Zhuravlev, B. Milkereit, B. Yang, S. Heiland, P. Vieth, M. Voigt, M. Schaper, G. Grundmeier, C. Schick, O. Kessler, Materials & Design (2021).
LibreCat
| DOI
E. Zhuravlev, B. Milkereit, B. Yang, S. Heiland, P. Vieth, M. Voigt, M. Schaper, G. Grundmeier, C. Schick, O. Kessler, Materials & Design (2021).
2021 | Dissertation | LibreCat-ID: 26900
Mikrostrukturausprägung additiv gefertigter Gitterstrukturen
A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, 2021.
LibreCat
A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, 2021.
2021 | Newspaper Article | LibreCat-ID: 27366
Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen
E. Moritzer, F. Hecker, Jahresmagazin Kunststofftechnik (2021) 70–75.
LibreCat
| Download (ext.)
E. Moritzer, F. Hecker, Jahresmagazin Kunststofftechnik (2021) 70–75.
2021 | Book Chapter | LibreCat-ID: 23734
Konstruktionsrichtlinien in der Produktentwicklung
S. Lammers, A. Kruse, J. Gierse, J. Tominski, C.-F. Lindemann, in: R. Koch, D. Zimmer, T. Tröster, I. Gräßler (Eds.), Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, 2021.
LibreCat
S. Lammers, A. Kruse, J. Gierse, J. Tominski, C.-F. Lindemann, in: R. Koch, D. Zimmer, T. Tröster, I. Gräßler (Eds.), Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, 2021.
2021 | Conference Paper | LibreCat-ID: 23760 |
Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12
D. Menge, H.-J. Schmid, in: 2021.
LibreCat
| Download (ext.)
D. Menge, H.-J. Schmid, in: 2021.
2021 | Conference Paper | LibreCat-ID: 20886
Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts
T. Nickchen, S. Heindorf, G. Engels, in: Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, 2021, pp. 1994–2002.
LibreCat
T. Nickchen, S. Heindorf, G. Engels, in: Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, 2021, pp. 1994–2002.
2021 | Journal Article | LibreCat-ID: 22447
Funktionsoptimierte AM-Gestaltung eines E-Rotors
S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, S. Urbanek, B. Ponick, Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen 60 (2021) 36–43.
LibreCat
| Download (ext.)
S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, S. Urbanek, B. Ponick, Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen 60 (2021) 36–43.
2021 | Journal Article | LibreCat-ID: 22495
Zukunftstechnologie und moderne Antriebe kombiniert: AM in modularen Antriebssystemen
D. Zimmer, T. Koers, T. Bührmann, Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung 1 (2021) 9–10.
LibreCat
| Download (ext.)
D. Zimmer, T. Koers, T. Bührmann, Newsletter Der Wissenschaftlichen Gesellschaft Für Produktentwicklung 1 (2021) 9–10.
2021 | Conference Abstract | LibreCat-ID: 30227
Online Monitoring des Beschichtungsprozesses im Laser Sintern, Systementwicklung und Einflussanalyse
S.H. Klippstein, in: D 07407 Rudolstadt, 2021.
LibreCat
| Files available
S.H. Klippstein, in: D 07407 Rudolstadt, 2021.
2021 | Conference Paper | LibreCat-ID: 25283
Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming
E. Moritzer, F. Hecker, C.L. Elsner, A. Hirsch, in: Proceedings of 36th Annual Meeting of Polymer Processing Society (PPS-36), n.d.
LibreCat
| Files available
E. Moritzer, F. Hecker, C.L. Elsner, A. Hirsch, in: Proceedings of 36th Annual Meeting of Polymer Processing Society (PPS-36), n.d.
2021 | Book | LibreCat-ID: 22032
Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability
E. Moritzer, A. Hirsch, C. Dalmer, Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability, Springer, 2021.
LibreCat
| DOI
E. Moritzer, A. Hirsch, C. Dalmer, Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability, Springer, 2021.
2021 | Journal Article | LibreCat-ID: 24162
Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK
E. Moritzer, J. Wächter, C.L. Elsner, Macromolecular Symposia 395 (2021).
LibreCat
| DOI
E. Moritzer, J. Wächter, C.L. Elsner, Macromolecular Symposia 395 (2021).
2021 | Journal Article | LibreCat-ID: 24681
Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting
E. Moritzer, C. Schumacher, Macromolecular Symposia 395 (2021).
LibreCat
| DOI
E. Moritzer, C. Schumacher, Macromolecular Symposia 395 (2021).
2021 | Conference Paper | LibreCat-ID: 24554
Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems
E. Moritzer, C.L. Elsner, J. Wächter, F. Knoop, in: 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
E. Moritzer, C.L. Elsner, J. Wächter, F. Knoop, in: 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
2021 | Journal Article | LibreCat-ID: 24555
Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters
E. Moritzer, C.L. Elsner, C. Schumacher, Polymer Composites 42 (2021) 6065–6079.
LibreCat
| DOI
E. Moritzer, C.L. Elsner, C. Schumacher, Polymer Composites 42 (2021) 6065–6079.
2021 | Conference Paper | LibreCat-ID: 36845
3D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe
A. Kruse, M. Ott, L. Risse, R. Koch, (2021).
LibreCat
| DOI
A. Kruse, M. Ott, L. Risse, R. Koch, (2021).
2021 | Mastersthesis | LibreCat-ID: 43005
Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit)
R. Gawlikowicz, Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit), Paderborn, 2021.
LibreCat
R. Gawlikowicz, Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit), Paderborn, 2021.
2021 | Conference Paper | LibreCat-ID: 24101 |
Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components
E. Moritzer, F. Hecker, C.L. Elsner, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 467–474.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, C.L. Elsner, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 467–474.
2021 | Conference Paper | LibreCat-ID: 24099 |
Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling
E. Moritzer, F. Hecker, C. Driediger, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 575–584.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, C. Driediger, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 575–584.
2021 | Conference Paper | LibreCat-ID: 24096 |
Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming
E. Moritzer, F. Hecker, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 1268–1275.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, A. Hirsch, in: D. Bourell (Ed.), Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), 2021, pp. 1268–1275.
2021 | Conference Paper | LibreCat-ID: 24160 |
Laser Sintering Design Guidelines for media transmitting Components
I. Kletetzka, C. Kummert, H.-J. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2021.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, C. Kummert, H.-J. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2021.
2020 | Dissertation | LibreCat-ID: 24771
Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren
F. Knoop, Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren, Shaker Verlag, Düren, 2020.
LibreCat
| Download (ext.)
F. Knoop, Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren, Shaker Verlag, Düren, 2020.
2020 | Dissertation | LibreCat-ID: 24773
Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte
M. Fischer, Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte, Shaker Verlag, Düren, 2020.
LibreCat
| Download (ext.)
M. Fischer, Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte, Shaker Verlag, Düren, 2020.
2020 | Report | LibreCat-ID: 24943
Additive Leichtbaustrukturen für die Flugzeugkabine
D. Menge, S.H. Klippstein, H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
LibreCat
| Download (ext.)
D. Menge, S.H. Klippstein, H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
2020 | Conference Abstract | LibreCat-ID: 24478
From filament production to material qualification for the FDM process
E. Moritzer, J. Wächter, in: 2020.
LibreCat
E. Moritzer, J. Wächter, in: 2020.
2020 | Report | LibreCat-ID: 24669
Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren
T. Lieneke, T. Künneke, N. Eschner, A. Jacob, M. Schäfer, T. Hickmann, R. Faroun, M. Hoffmann, M. Scholl, K. Baumeister, D. Zimmer, G. Lanza, Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren, 2020.
LibreCat
| Files available
T. Lieneke, T. Künneke, N. Eschner, A. Jacob, M. Schäfer, T. Hickmann, R. Faroun, M. Hoffmann, M. Scholl, K. Baumeister, D. Zimmer, G. Lanza, Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren, 2020.
2020 | Dissertation | LibreCat-ID: 21209
Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V
D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , Shaker, 2020.
LibreCat
D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , Shaker, 2020.
2020 | Book Chapter | LibreCat-ID: 18789
Opportunities of 3D Machine Learning for Manufacturability Analysis and Component Recognition in the Additive Manufacturing Process Chain
T. Nickchen, G. Engels, J. Lohn, in: Industrializing Additive Manufacturing, Cham, 2020.
LibreCat
| DOI
T. Nickchen, G. Engels, J. Lohn, in: Industrializing Additive Manufacturing, Cham, 2020.
2020 | Conference Paper | LibreCat-ID: 22138
Strukturoptimierung einer Messradkomponente zur realitätsnäheren Erfassung von Fahrzeuglastdaten und Bruchmechanische Bewertung
J.P. Brüggemann, L. Risse, S.C. Woodcock, T.D. Joy, J. Neumann, J. Vidner , G. Kullmer, H.A. Richard, in: DVM-Bericht 252, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2020.
LibreCat
J.P. Brüggemann, L. Risse, S.C. Woodcock, T.D. Joy, J. Neumann, J. Vidner , G. Kullmer, H.A. Richard, in: DVM-Bericht 252, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2020.
2020 | Conference Paper | LibreCat-ID: 22142
Einsatz von Topologieoptimierungssoftware - Der Ersatz für den Ingenieur?
J.P. Brüggemann, L. Risse, S.C. Woodcock, G. Kullmer, H.A. Richard, in: DVM-Bericht 405, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2020.
LibreCat
J.P. Brüggemann, L. Risse, S.C. Woodcock, G. Kullmer, H.A. Richard, in: DVM-Bericht 405, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2020.
2020 | Conference Paper | LibreCat-ID: 22143
Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf
L. Risse, G. Kullmer, in: DVM-Bericht 405, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2020.
LibreCat
L. Risse, G. Kullmer, in: DVM-Bericht 405, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2020.
2020 | Conference Paper | LibreCat-ID: 22182
Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens
C. Kummert, W. Diekmann, K. Tews, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735–744.
LibreCat
| DOI
C. Kummert, W. Diekmann, K. Tews, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735–744.
2020 | Conference Paper | LibreCat-ID: 15490 |
Reduction of systematic measurement deviation in acoustic absorption measurement systems
L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, B. Henning, in: Fortschritte Der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat
| Files available
L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, B. Henning, in: Fortschritte Der Akustik - DAGA 2020, 2020, pp. 1077–1080.
2019 | Dissertation | LibreCat-ID: 24752
Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen
J. Rohde, Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen, Shaker Verlag, Düren, 2019.
LibreCat
| Download (ext.)
J. Rohde, Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen, Shaker Verlag, Düren, 2019.
2019 | Dissertation | LibreCat-ID: 24753
On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process
S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, Shaker Verlag GmbH, Düren, 2019.
LibreCat
| Download (ext.)
S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, Shaker Verlag GmbH, Düren, 2019.
2019 | Dissertation | LibreCat-ID: 24758
Zum Laserstrahlschmelzen neuer Kunststoffmaterialien
J. Lohn, Zum Laserstrahlschmelzen neuer Kunststoffmaterialien, Shaker Verlag GmbH, Düren, 2019.
LibreCat
| Download (ext.)
J. Lohn, Zum Laserstrahlschmelzen neuer Kunststoffmaterialien, Shaker Verlag GmbH, Düren, 2019.
2019 | Dissertation | LibreCat-ID: 24759
Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren
U. Jahnke, Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren, Shaker Verlag, Düren, 2019.
LibreCat
| Download (ext.)
U. Jahnke, Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren, Shaker Verlag, Düren, 2019.
2019 | Dissertation | LibreCat-ID: 24761
Intelligente Optimierung von Produktgeometrien für die additive Fertigung
T. Reiher, Intelligente Optimierung von Produktgeometrien für die additive Fertigung, Shaker Verlag, Düren, 2019.
LibreCat
| Download (ext.)
T. Reiher, Intelligente Optimierung von Produktgeometrien für die additive Fertigung, Shaker Verlag, Düren, 2019.
2019 | Dissertation | LibreCat-ID: 24762
Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung
G. Deppe, Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung, Shaker Verlag, Düren, 2019.
LibreCat
| Download (ext.)
G. Deppe, Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung, Shaker Verlag, Düren, 2019.
2019 | Report | LibreCat-ID: 24628
FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen
D. Menge, R. Walter, H.-J. Schmid, U.P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, Frankfurt, 2019.
LibreCat
D. Menge, R. Walter, H.-J. Schmid, U.P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, Frankfurt, 2019.
2019 | Dissertation | LibreCat-ID: 26898
Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung
M.E. Aydinöz, Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung, 2019.
LibreCat
M.E. Aydinöz, Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung, 2019.
2019 | Report | LibreCat-ID: 21210
Schlussbericht zum Vorhaben "Additive Leichtbaustrukturen für Flugzeugkomponenten" : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme
D. Ahlers, T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme, Universität Paderborn, TIB, 2019.
LibreCat
| DOI
D. Ahlers, T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme, Universität Paderborn, TIB, 2019.
2019 | Book | LibreCat-ID: 22113
Entwicklung von Optimierungsstrategien für Strukturbauteile unter Ausnutzung der Potentiale des Laser-Strahlschmelzens
J.P. Brüggemann, L. Risse, G. Kullmer, H.A. Richard, Entwicklung von Optimierungsstrategien Für Strukturbauteile Unter Ausnutzung Der Potentiale Des Laser-Strahlschmelzens, 2019.
LibreCat
J.P. Brüggemann, L. Risse, G. Kullmer, H.A. Richard, Entwicklung von Optimierungsstrategien Für Strukturbauteile Unter Ausnutzung Der Potentiale Des Laser-Strahlschmelzens, 2019.
2019 | Book | LibreCat-ID: 22115
Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen
L. Risse, S.C. Woodcock, G. Kullmer, B. Schramm, H.A. Richard, Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen, 2019.
LibreCat
L. Risse, S.C. Woodcock, G. Kullmer, B. Schramm, H.A. Richard, Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen, 2019.
2019 | Conference Paper | LibreCat-ID: 22121
Möglichkeiten additiver Fertigungsverfahren im Zuge der Digitalisierung für den Planungsprozess chirurgischer Eingriffe
L. Risse, B. Schramm, in: DVM - Bericht 1685, DVM-Tag 2019 – Bauteil Verstehen, 2019, pp. 103–120.
LibreCat
L. Risse, B. Schramm, in: DVM - Bericht 1685, DVM-Tag 2019 – Bauteil Verstehen, 2019, pp. 103–120.
2019 | Conference Paper | LibreCat-ID: 22123
Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen
J.P. Brüggemann, L. Risse, H.A. Richard, G. Kullmer, in: DVM - Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2019, pp. 207–218.
LibreCat
J.P. Brüggemann, L. Risse, H.A. Richard, G. Kullmer, in: DVM - Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2019, pp. 207–218.
2019 | Conference Paper | LibreCat-ID: 22124
Bewertung von verschieden gearteten Gitterstrukturen in Bezug auf ihre Einsatzfähigkeit in Bandscheibenimplantaten
S.C. Woodcock, L. Risse, G. Kullmer, H.A. Richard, in: DVM - Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2019, pp. 151–162.
LibreCat
S.C. Woodcock, L. Risse, G. Kullmer, H.A. Richard, in: DVM - Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2019, pp. 151–162.
2019 | Conference Paper | LibreCat-ID: 22137
Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen
J.P. Brüggemann, L. Risse, H.A. Richard, G. Kullmer, in: DVM-Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2019, pp. 207–218.
LibreCat
J.P. Brüggemann, L. Risse, H.A. Richard, G. Kullmer, in: DVM-Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2019, pp. 207–218.
2019 | Conference Paper | LibreCat-ID: 22140
Potentiale des Einsatzes individueller, additiv gefertigter medizinischer Hilfsmittel
L. Risse, S.C. Woodcock, G. Kullmer, B. Schramm, F. Schlenker, H.A. Richard, in: DVM-Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, 2019, pp. 139–150.
LibreCat
L. Risse, S.C. Woodcock, G. Kullmer, B. Schramm, F. Schlenker, H.A. Richard, in: DVM-Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, 2019, pp. 139–150.
2019 | Conference Paper | LibreCat-ID: 22141
Strukturoptimierung durch den Einsatz des Laser-Strahlschmelzprozesses zur realitätsnäheren Erfassung von Fahrzeug-Lastdaten
J.P. Brüggemann, L. Risse, S.C. Woodcock, T. Duffe, J. Neumann, J. Vidner, G. Kullmer, H.A. Richard, in: DVM-Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2019, pp. 69–82.
LibreCat
J.P. Brüggemann, L. Risse, S.C. Woodcock, T. Duffe, J. Neumann, J. Vidner, G. Kullmer, H.A. Richard, in: DVM-Bericht 404, Arbeitskreis: Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2019, pp. 69–82.
2019 | Conference Paper | LibreCat-ID: 22144
Reconstruction of a defective finger joint surface and development of an adapted external fixator
L. Risse, S.C. Woodcock, G. Kullmer, B. Schramm, H.A. Richard, in: Lecture Notes in Computational Vision and Biomechanics , 2019, pp. 230–238.
LibreCat
L. Risse, S.C. Woodcock, G. Kullmer, B. Schramm, H.A. Richard, in: Lecture Notes in Computational Vision and Biomechanics , 2019, pp. 230–238.
2019 | Conference Paper | LibreCat-ID: 22198
Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019.
LibreCat
| DOI
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019.
2019 | Conference Paper | LibreCat-ID: 22442
Design guidelines for post-processing of laser beam melting in context of support structures
T. Künneke, T. Lieneke, S. Lammers, D. Zimmer, in: Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat
| DOI
T. Künneke, T. Lieneke, S. Lammers, D. Zimmer, in: Proceedings of the Special Interest Group Meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
2019 | Conference Paper | LibreCat-ID: 22443
Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, D. Zimmer, in: Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat
| DOI
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, D. Zimmer, in: Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
2019 | Journal Article | LibreCat-ID: 22444
Schall mittels Pulver dämpfen
T. Künneke, D. Zimmer, Konstruktionspraxis 6 (2019) 24–26.
LibreCat
T. Künneke, D. Zimmer, Konstruktionspraxis 6 (2019) 24–26.
2019 | Conference Paper | LibreCat-ID: 22000
Risikoorientierte Analyse und Handhabung von Anforderungsänderungen
I. Gräßler, C. Oleff, in: Design for X - Beiträge Zum 30. DfX-Symposium , 2019, pp. 49–60.
LibreCat
| DOI
I. Gräßler, C. Oleff, in: Design for X - Beiträge Zum 30. DfX-Symposium , 2019, pp. 49–60.
2019 | Conference Paper | LibreCat-ID: 22001
Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme
I. Gräßler, C. Oleff, P. Scholle, in: Fachtagung Mechatronik 2019 Paderborn, 2019, p. S. 1-6.
LibreCat
| DOI
I. Gräßler, C. Oleff, P. Scholle, in: Fachtagung Mechatronik 2019 Paderborn, 2019, p. S. 1-6.
2019 | Conference Paper | LibreCat-ID: 22002
Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme
I. Gräßler, H. Thiele, C. Oleff, P. Scholle, V. Schulze, in: International Conference on Engineering Design (ICED19), 2019, pp. 1265–1274.
LibreCat
| DOI
I. Gräßler, H. Thiele, C. Oleff, P. Scholle, V. Schulze, in: International Conference on Engineering Design (ICED19), 2019, pp. 1265–1274.
2019 | Conference Paper | LibreCat-ID: 22022
Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength
E. Moritzer, J. Wächter, M. Elsner, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 856–863.
LibreCat
| DOI
E. Moritzer, J. Wächter, M. Elsner, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 856–863.
2019 | Misc | LibreCat-ID: 16825
Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V
D. Ahlers, T. Tröster, Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V, EuroPM, Maastricht, 2019.
LibreCat
D. Ahlers, T. Tröster, Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V, EuroPM, Maastricht, 2019.
2019 | Journal Article | LibreCat-ID: 22047
Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites
E. Moritzer, A. Hirsch, H.P. Heim, C. Cherif, W. Truemper, Welding in the World 63 (2019) 867–873.
LibreCat
| DOI
E. Moritzer, A. Hirsch, H.P. Heim, C. Cherif, W. Truemper, Welding in the World 63 (2019) 867–873.
2019 | Conference Paper | LibreCat-ID: 22028
Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures
E. Moritzer, A. Hirsch, F.I. Bürenhaus, in: AIP Conference Proceedings, AIP Publishing, 2019.
LibreCat
| DOI
E. Moritzer, A. Hirsch, F.I. Bürenhaus, in: AIP Conference Proceedings, AIP Publishing, 2019.
2019 | Conference Paper | LibreCat-ID: 22027
A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process
V. Schöppner, C. Schumacher, C. Fels, in: AIP Conference Proceedings, AIP Publishing, 2019.
LibreCat
| DOI
V. Schöppner, C. Schumacher, C. Fels, in: AIP Conference Proceedings, AIP Publishing, 2019.
2019 | Book | LibreCat-ID: 22026
Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung
E. Moritzer, A. Hirsch, S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung, Springer Vieweg, 2019.
LibreCat
| DOI
E. Moritzer, A. Hirsch, S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung, Springer Vieweg, 2019.
2019 | Journal Article | LibreCat-ID: 36846
Mit 3D-Druck umfassende Teilhabe möglich machen
A. Kruse, M. Mummert, Werkstatt:Dialog (2019) 34–35.
LibreCat
A. Kruse, M. Mummert, Werkstatt:Dialog (2019) 34–35.
2019 | Conference Paper | LibreCat-ID: 22202
Devolopment, Production and post-processing of a topology optimized aircraft bracket
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932–1945.
LibreCat
| Download (ext.)
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932–1945.
2019 | Conference Paper | LibreCat-ID: 22441
Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization
S. Lammers, J. Tominski, D. Zimmer, in: II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185.
LibreCat
| DOI
S. Lammers, J. Tominski, D. Zimmer, in: II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185.
2019 | Conference Paper | LibreCat-ID: 22041
Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components
E. Moritzer, A. Hirsch, F. Hecker, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 705–714.
LibreCat
| DOI
E. Moritzer, A. Hirsch, F. Hecker, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 705–714.
2018 | Report | LibreCat-ID: 23736
Weichmagnetische Werkstoffe für die additive Fertigung von E-Motoren
A. Taube, S. Lammers, S. Urbanek, R. Mrozek, Weichmagnetische Werkstoffe Für Die Additive Fertigung von E-Motoren, Forschungsvereinigung Antriebstechnik e.V., 2018.
LibreCat
A. Taube, S. Lammers, S. Urbanek, R. Mrozek, Weichmagnetische Werkstoffe Für Die Additive Fertigung von E-Motoren, Forschungsvereinigung Antriebstechnik e.V., 2018.
2018 | Conference Paper | LibreCat-ID: 22116
Additive Fertigung in der modernen Orthopädietechnik - Anwendung und Forschungsansätze -
T. Schafran, B. Schramm, L. Risse, in: DVM - AK Implantate Und Biostrukturen, 2018.
LibreCat
T. Schafran, B. Schramm, L. Risse, in: DVM - AK Implantate Und Biostrukturen, 2018.