Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
300 Publications
2023 | Conference Paper | LibreCat-ID: 46862 |
F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50926.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 30229
S. H. Klippstein, “Reproducibility in Polymer Laser Sintering,” presented at the Public Science Session of the DMRC Technical Meeting Feb 2022, Online, 2022.
LibreCat
2022 | Report | LibreCat-ID: 34020
M. Haase, F. Tasche, M. Bieber, and A. Zibart, Innovative Leichtbau- und Kühlungskonzepte für elektrische Maschinen durch additive Fertigung (ILuKadd3D), vol. Heft 1526. Frankfurt: Forschungsvereinigung Antriebstechnik e.V., 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 33355
S. H. Klippstein, “Neue Polymerwerkstoffe - Der Schlüssel für die Industrialisierung,” presented at the AM Forum Berlin, Berlin, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33859
E. Moritzer and C. L. Elsner, “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100390.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33861
E. Moritzer and J. Wächter, “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100389.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 33987
E. Moritzer and C. L. Elsner, “Mit Gestaltungsrichtlinien zum Erfolg,” Kunststoffe, vol. 11/2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33862
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 35729
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 35724
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 30228
S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi: https://doi.org/10.1007/s11837-021-05042-w .
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33356 |
S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 31871
I. Kletetzka and S. H. Klippstein, “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag),” presented at the 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben, Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43011
F. P. Hanselle, Untersuchung und Modellierung der Materialeigenschaften von glaskugelgefüllten, im Lasersinterprozess verarbeiteten Dry-Blends. 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43010
M. Kosanke, Oberflächenmodifikation von Glaskugeln zur Verbesserung der Adhäsion im Lasersinterverfahren. Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43007
F. Henke, Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit). Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 46858
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver. 2022.
LibreCat
2022 | Bachelorsthesis | LibreCat-ID: 43012
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft. Paderborn, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33852 |
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30220 |
I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44558.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 50744 |
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, and C. Haefner, “Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion,” presented at the Solid Freeform Fabrication, Austin, 2022.
LibreCat
| Files available
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33853 |
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24760
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, vol. 22. Düren: Shaker Verlag GmbH, 2021.
LibreCat
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, vol. 24. Düren: Shaker Verlag, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 28017
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, 2021, doi: https://doi.org/10.3390/ma14237190.
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Newspaper Article | LibreCat-ID: 24095 |
E. Moritzer, F. Hecker, and A. Hirsch, “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen,” Kunststoffland NRW report, vol. 2021, no. 2, pp. 42–43, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24168
E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
E. Moritzer, F. Hecker, and A. Hirsch, “Kleine Tropfen, große Wirkung,” Kunststoffe, no. 9/2021, pp. 88–90, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24589
E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,” Materials & Design, Art. no. 109677, 2021, doi: 10.1016/j.matdes.2021.109677.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 26900
A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, vol. 23. 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 27366
E. Moritzer and F. Hecker, “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen,” Jahresmagazin Kunststofftechnik, pp. 70–75, 2021.
LibreCat
| Download (ext.)
2021 | Book Chapter | LibreCat-ID: 23734
S. Lammers, A. Kruse, J. Gierse, J. Tominski, and C.-F. Lindemann, “Konstruktionsrichtlinien in der Produktentwicklung,” in Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, R. Koch, D. Zimmer, T. Tröster, and I. Gräßler, Eds. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23760 |
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 20886
T. Nickchen, S. Heindorf, and G. Engels, “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts,” in Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, Hawaii, 2021, pp. 1994–2002.
LibreCat
2021 | Journal Article | LibreCat-ID: 22447
S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, S. Urbanek, and B. Ponick, “Funktionsoptimierte AM-Gestaltung eines E-Rotors,” antriebstechnik - Zeitschrift für Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen , vol. 60, no. 6, pp. 36–43, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 22495
D. Zimmer, T. Koers, and T. Bührmann, “Zukunftstechnologie und moderne Antriebe kombiniert: AM in modularen Antriebssystemen,” Newsletter der Wissenschaftlichen Gesellschaft für Produktentwicklung, vol. 1, pp. 9–10, 2021.
LibreCat
| Download (ext.)
2021 | Conference Abstract | LibreCat-ID: 30227
S. H. Klippstein, “Online Monitoring des Beschichtungsprozesses im Laser Sintern, Systementwicklung und Einflussanalyse,” presented at the Rudolstädter Kunststofftage 2021, Tudolstadt, 2021.
LibreCat
| Files available
2021 | Conference Paper | LibreCat-ID: 25283
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming,” presented at the 36th International Conference of the Polymer Processing Society, Montreal, Canada.
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 24162
E. Moritzer, J. Wächter, and C. L. Elsner, “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK,” Macromolecular Symposia, vol. 395, no. 1, 2021, doi: 10.1002/masy.202000269.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24681
E. Moritzer and C. Schumacher, “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting,” Macromolecular Symposia, vol. 395, no. 1, Art. no. 2000275, 2021, doi: 10.1002/masy.202000275.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24554
E. Moritzer, C. L. Elsner, J. Wächter, and F. Knoop, “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems,” presented at the 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24555
E. Moritzer, C. L. Elsner, and C. Schumacher, “Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters,” Polymer Composites, vol. 42, no. 11, pp. 6065–6079, 2021, doi: 10.1002/pc.26285.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 36845
A. Kruse, M. Ott, L. Risse, and R. Koch, “3D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe.” Deutscher Verband für Materialforschung und -prüfung e.V., 2021, doi: 10.48447/Add-2021-016.
LibreCat
| DOI
2021 | Mastersthesis | LibreCat-ID: 43005
R. Gawlikowicz, Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit). Paderborn, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24101 |
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 467–474, doi: 10.26153/tsw/17567.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24099 |
E. Moritzer, F. Hecker, C. Driediger, and A. Hirsch, “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 575–584, doi: 10.26153/tsw/17577.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24096 |
E. Moritzer, F. Hecker, and A. Hirsch, “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 1268–1275, doi: 10.26153/tsw/17643.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24160 |
I. Kletetzka, C. Kummert, and H.-J. Schmid, “Laser Sintering Design Guidelines for media transmitting Components,” in Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Austin, 2021, vol. 32, doi: http://dx.doi.org/10.26153/tsw/17548.
LibreCat
| DOI
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24771
F. Knoop, Untersuchung der mechanischen und geometrischen Eigenschaften von Bauteilen hergestellt im Fused Deposition Modeling Verfahren, vol. 18. Düren: Shaker Verlag, 2020.
LibreCat
| Download (ext.)
2020 | Dissertation | LibreCat-ID: 24773
M. Fischer, Oberflächennachbehandlung beim Fused Deposition Modeling – Analyse der Oberflächenstruktur und mechanischer Kennwerte, vol. 17. Düren: Shaker Verlag, 2020.
LibreCat
| Download (ext.)
2020 | Report | LibreCat-ID: 24943
D. Menge, S. H. Klippstein, and H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat
| Download (ext.)
2020 | Conference Abstract | LibreCat-ID: 24478
E. Moritzer and J. Wächter, “From filament production to material qualification for the FDM process,” presented at the Seminar(Thermofisher): Polymer Compounds for 3D filaments – production, quality control and application, Karlsruhe, 2020.
LibreCat
2020 | Report | LibreCat-ID: 24669
T. Lieneke et al., Kombination und Integration etablierter Technologien mit additiven Fertigungsverfahren. 2020.
LibreCat
| Files available
2020 | Dissertation | LibreCat-ID: 21209
D. Ahlers, Parameter- und Prozessoptimierung für den additiven Fertigungsprozess im Pulverbett am Beispiel der Legierung Ti6Al4V , vol. 19. Shaker, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 22138
J. P. Brüggemann et al., “Strukturoptimierung einer Messradkomponente zur realitätsnäheren Erfassung von Fahrzeuglastdaten und Bruchmechanische Bewertung,” in DVM-Bericht 252, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 252.
LibreCat
2020 | Conference Paper | LibreCat-ID: 22142
J. P. Brüggemann, L. Risse, S. C. Woodcock, G. Kullmer, and H. A. Richard, “Einsatz von Topologieoptimierungssoftware - Der Ersatz für den Ingenieur?,” in DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 405.
LibreCat
2020 | Conference Paper | LibreCat-ID: 22143
L. Risse and G. Kullmer, “Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf,” in DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 405.
LibreCat
2020 | Conference Paper | LibreCat-ID: 15490 |
L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, and B. Henning, “Reduction of systematic measurement deviation in acoustic absorption measurement systems,” in Fortschritte der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat
| Files available
2019 | Dissertation | LibreCat-ID: 24752
J. Rohde, Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen, vol. 16. Düren: Shaker Verlag, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24753
S. Josupeit, On the Influence of Thermal Histories within Part Cakes on the Polymer Laser Sintering Process, vol. 11. Düren: Shaker Verlag GmbH, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24758
J. Lohn, Zum Laserstrahlschmelzen neuer Kunststoffmaterialien, vol. 15. Düren: Shaker Verlag GmbH, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24759
U. Jahnke, Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren, vol. 13. Düren: Shaker Verlag, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24761
T. Reiher, Intelligente Optimierung von Produktgeometrien für die additive Fertigung, vol. 12. Düren: Shaker Verlag, 2019.
LibreCat
| Download (ext.)
2019 | Dissertation | LibreCat-ID: 24762
G. Deppe, Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung, vol. 9. Düren: Shaker Verlag, 2019.
LibreCat
| Download (ext.)
2019 | Report | LibreCat-ID: 24628
D. Menge, R. Walter, H.-J. Schmid, and U. P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, vol. 1338. Frankfurt, 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 26898
M. E. Aydinöz, Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung, vol. 10. 2019.
LibreCat
2019 | Book | LibreCat-ID: 22113
J. P. Brüggemann, L. Risse, G. Kullmer, and H. A. Richard, Entwicklung von Optimierungsstrategien für Strukturbauteile unter Ausnutzung der Potentiale des Laser-Strahlschmelzens. 2019, pp. 1–22.
LibreCat
2019 | Book | LibreCat-ID: 22115
L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen. 2019, pp. 35–56.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22121
L. Risse and B. Schramm, “Möglichkeiten additiver Fertigungsverfahren im Zuge der Digitalisierung für den Planungsprozess chirurgischer Eingriffe,” in DVM - Bericht 1685, DVM-Tag 2019 – Bauteil verstehen, 2019, vol. 1685, pp. 103–120.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22123
J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen,” in DVM - Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 251, pp. 207–218.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22124
S. C. Woodcock, L. Risse, G. Kullmer, and H. A. Richard, “Bewertung von verschieden gearteten Gitterstrukturen in Bezug auf ihre Einsatzfähigkeit in Bandscheibenimplantaten,” in DVM - Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 404, pp. 151–162.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22137
J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen,” in DVM-Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 251, pp. 207–218.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22140
L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, F. Schlenker, and H. A. Richard, “Potentiale des Einsatzes individueller, additiv gefertigter medizinischer Hilfsmittel,” in DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, 2019, vol. 404, pp. 139–150.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22141
J. P. Brüggemann et al., “Strukturoptimierung durch den Einsatz des Laser-Strahlschmelzprozesses zur realitätsnäheren Erfassung von Fahrzeug-Lastdaten,” in DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 404, pp. 69–82.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22144
L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, “Reconstruction of a defective finger joint surface and development of an adapted external fixator,” in Lecture Notes in Computational Vision and Biomechanics , 2019, pp. 230–238.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22443
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22444
T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” konstruktionspraxis, vol. 6, pp. 24–26, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22022
E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat
| DOI
2019 | Misc | LibreCat-ID: 16825
D. Ahlers and T. Tröster, Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 22047
E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, vol. 63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22028
E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi: 10.1063/1.5088314.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22027
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 36846
A. Kruse and M. Mummert, “Mit 3D-Druck umfassende Teilhabe möglich machen ,” Werkstatt:Dialog, no. 4, pp. 34–35, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 22441
S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,” in II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22041
E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.
LibreCat
| DOI
2018 | Report | LibreCat-ID: 23736
A. Taube, S. Lammers, S. Urbanek, and R. Mrozek, Weichmagnetische Werkstoffe für die additive Fertigung von E-Motoren, vol. Heft 1286. Forschungsvereinigung Antriebstechnik e.V., 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22116
T. Schafran, B. Schramm, and L. Risse, “Additive Fertigung in der modernen Orthopädietechnik - Anwendung und Forschungsansätze -,” in DVM - AK Implantate und Biostrukturen, 2018.
LibreCat