Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4015 Publications
2023 | Book Chapter | LibreCat-ID: 52689
Striewe, Marius, Dominik Teutenberg, David Hein, Gerson Meschut, Lars Schmelzle, Julia Mergheim, and Gunnar Possart. “Methode zur Simulation des temperaturabhängigen Crashverhaltens von strukturellen Klebverbindungen.” In Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, Vol. 369. DVS Berichte, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52800
Stüker, Daniel, and Volker Schöppner. “Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruder.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0138943.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 45110
Gräßler, Iris, Eckhard Steffen, Günter W. Maier, and Daniel Roesmann. “Introduction—The Digital Twin of Humans.” In The Digital Twin of Humans, edited by Iris Gräßler, Günter W. Maier, Eckhard Steffen, and Daniel Roesmann, 3–10. Cham: Springer International Publishing, 2023. https://doi.org/10.1007/978-3-031-26104-6_1.
LibreCat
| Files available
| DOI
2023 | Book (Editor) | LibreCat-ID: 45191
Gräßler, Iris, Günter W. Maier, Eckhard Steffen, and Daniel Roesmann, eds. The Digital Twin of Humans. Cham: Springer International Publishing, 2023. https://doi.org/10.1007/978-3-031-26104-6.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 31733
Schöppner, Volker, and Florian Brüning. “Calibration of a Contact Model for DEM Simulations of Grooved Feed Sections of Single Screw Extruders.” In 36th International Conference of the Polymer Processing Society (PPS-36). Montreal (Kanada), 2023. https://doi.org/10.1063/5.0135858.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 45187
Pöhler, Alexander, and Iris Gräßler. “Individual Assembly Guidance.” In The Digital Twin of Humans, 171–85. Cham: Springer International Publishing, 2023. https://doi.org/10.1007/978-3-031-26104-6_8.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34748
Vogtschmidt, Sascha, and Volker Schöppner. “The Short-and Long-Term Properties of Welded High-Temperature-Resistant Thermoplastics,” 2023. https://doi.org/10.1007/s40194-023-01595-3.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52802
Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia 411, no. 1 (2023). https://doi.org/10.1002/masy.202200181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52801
Altepeter, Matthias, Sven Wanke, and Volker Schöppner. “Analysis and Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0135824.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 45111
Roesmann, Daniel, and Iris Gräßler. “Integration of Human Factors for Assembly Systems of the Future.” In The Digital Twin of Humans, 187–203. Cham: Springer International Publishing, 2023. https://doi.org/10.1007/978-3-031-26104-6_9.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48657
Moritzer, Elmar, Lisa Tölle, C. Greb, and M. Haag. “Conceptions and Feasibility Study of Fiber Orientation in the Melt as Part of a Completely Circular Recycling Concept for Fiber-Reinforced Thermoplastics.” Journal of Composites Science, no. 7 (2023): 267. https://doi.org/10.3390/jcs7070267.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48750
Schöppner, Volker, Matthias Altepeter, Laura Austermeier, Sven Wanke, and Philipp Meinheit. “Polypropylene Degradation on Co-Rotating Twin-Screw Extruders.” Polymers 2023, no. 15(9) (2023): 2181. https://doi.org/10.3390/polym15092181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34736
Schöppner, Volker, and Maximilian Frank. “Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as Well as Pressure Throughput Behavior,” 2023. https://doi.org/10.1063/5.0135825.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 29946
Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Design of a Test Bench for Measuring the Degradation Behavior of Plastics during Processing.” In PPS36, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48742
Schöppner, Volker, and Christoph Wilhelm Theodor Schall. “Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior.” Materials, no. 16(17) (2023): 5891. https://doi.org/10.3390/ma16175891.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48654
Moritzer, Elmar, and Christian Held. “Characterization of Additively Manufactured Parts for Direct Screwing.” Welding in the World, 2023. https://doi.org/10.1007/s40194-023-01610-7.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46488
Gräßler, Iris, Anna-Sophie Koch, and Alena Marie Tusek. “POTENTIALS AND GOALS OF MODELS IN STRATEGIC PRODUCT PLANNING AND INNOVATION MANAGEMENT.” In Proceedings of the Design Society, 3:2915–24. Cambridge University Press (CUP), 2023. https://doi.org/10.1017/pds.2023.292.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 46796
Hesse, Philipp, and Iris Gräßler. “Interdependency Study of Design Guidelines.” In Climate Protection, Resource Efficiency, and Sustainable Engineering: Transdisciplinary Approaches to Design and Manufacturing Technology., edited by Ilona Horwath and Swetlana Schweizer, 1., 128–38. Bielefeld: transcript, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 46792
Hesse, Philipp, and Iris Gräßler. “Sustainable Product Life Cycle.” In Climate Protection, Resource Efficiency, and Sustainable Engineering: Transdisciplinary Approaches to Design and Manufacturing Technology., edited by Ilona Horwath and Swetlana Schweizer, 1., 89–98. Bielefeld : transcript, 2023.
LibreCat
2023 | Report | LibreCat-ID: 46501
Gräßler, Iris, Jivka Ovtcharova, Michael Dattner, Tilko Dietert, Patrick Dietz, Matthes Elstermann, Celestin Fayet, et al. Begriffe Der Strategischen Produktplanung Und -Entwicklung. Produkt Und Hybride Leistung, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44220
Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut. “Approach for a Sustainable Process Chain in Manufacturing of Fasteners for Mechanical Joining.” Millersville, PA, USA: Materials Research Proceedings, 2023. https://doi.org/10.21741/9781644902417-49.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48659
Trienens, Dorte, Volker Schöppner, and Robin Bunse. “Determination of Correlations between Melt Quality and the Screw Performance Index in the Extrusion Process.” Polymers 2023, 2023. https://doi.org/10.3390/polym15163427.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48737
Schöppner, Volker, and Dennis Kleinschmidt. “Improvement of a Method for the Correction of Wall Slip Effects within the Rheological Measurements of Filled Rubber Compounds.” SPE Polymers, 2023, 1–17.
LibreCat
2023 | Conference Paper | LibreCat-ID: 34395
Gräßler, Iris, Michael Hieb, Daniel Roesmann, and Marc Unverzagt. “Creating Synthetic Training Data for Machine Vision Quality Gates.” edited by Volker Lohweg, 95–106. Berlin, Heidelberg: Springer Vieweg, 2023. https://doi.org/10.1007/978-3-662-66769-9_7 .
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52831 | 
Butzhammer, Lorenz, Fabian Kappe, Gerson Meschut, and Tino Hausotte. “Dynamic Conformity Assessment for Joining Force Monitoring Using Bayes Filters.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-48.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46974
Gräßler, Iris, and Michael Hieb. “Creating Synthetic Datasets for Deep Learning Used in Machine Vision.” CIRP , 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46219
Gräßler, Iris, and Philipp Hesse. “CONSIDERING ENGINEERING ACTIVITIES AND PRODUCT CHARACTERISTICS TO ACHIEVE MATERIAL CIRCULARITY BY DESIGN.” In Proceedings of the Design Society, 3:1077–86. Cambridge University Press (CUP), 2023. https://doi.org/10.1017/pds.2023.108.
LibreCat
| Files available
| DOI
2023 | Conference Paper | LibreCat-ID: 52823
Gräßler, Iris, Daniel Roesmann, Marc Unverzagt, and Jens Pottebaum. “Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems.” In Poster, 416–17. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2023. https://doi.org/10.5162/smsi2023/p70.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52839
Gräßler, Iris, Michael Hieb, Daniel Roesmann, Marc Unverzagt, and Jens Pottebaum. “Virtual Learning Environment for Teaching the Handling of Collaborative Robots.” In SSRN Electronic Journal. Elsevier BV, 2023. https://doi.org/10.2139/ssrn.4471596.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46973
Gräßler, Iris, and Michael Hieb. “Cloud-Computing Für Die Verwendung Synthetischer Trainingsdaten Für Machine Vision Quality Gates.” In Automation 2023, 2419:765–76. VDI-Berichte. VDI Verlag , 2023. https://doi.org/10.51202/9783181024195-765.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52828
Brüning, Florian, Dennis Kleinschmidt, and J. Petzke. “Wall Slip-Free Viscosity Determination of Filled Rubber Compounds Using Steady-State Shear Measurements.” Polymers, 2023, 1–23. https://doi.org/10.3390/polym15224406.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52833
Schöppner, Volker, Laura Austermeier, Florian Brüning, Jan Philipp Oldemeier, and O. Brandt. “Recycling-Ansatz für mehrkomponentige Kunststoffprodukte durch thermische Verbundtrennung.” EXTRUSION, no. 8/2023 (2023): 56–59.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52840
Schöppner, Volker, and Theresa Arndt. “Anvil-Free Ultrasonic Welding for Welding Situations with One Sided Access.” In 76th Annual Assembly of the International Institute of Welding (IIW). Singapur , 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 52836
Brüning, Florian, Dennis Kleinschmidt, and J. Petzke. “Elastomerrecycling mittels Mikrowellenstrahlung.” Kunststoffland NRW Report, no. 03/2023 (2023): 28–29.
LibreCat
2023 | Journal Article | LibreCat-ID: 52837
Moritzer, Elmar, S. Kartelmeyer, R. Kringe, and C. Jaroschek. “Conformal Cooling at Low Cost.” Plastics Insights, no. 8/2023 (2023): 44–48.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52816
Gräßler, Iris, and Michael Hieb. “Creating Synthetic Training Datasets for Inspection in Machine Vision Quality Gates in Manufacturing.” In Lectures, 253–524. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2023. https://doi.org/10.5162/smsi2023/d7.4.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46450
Gräßler, Iris, Daniel Preuß, Lukas Brandt, and Michael Mohr. “Efficient Formalisation of Technical Requirements for Generative Engineering.” In Proceedings of the Design Society, 1595–1604, 2023. https://doi.org/10.1017/pds.2023.160.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52821 |
Wituschek, Simon, Fabian Kappe, Gerson Meschut, and Michael Lechner. “Combination of Versatile Self-Piercing Riveting Processes.” In Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-16.
LibreCat
| DOI
| Download (ext.)
2023 | Dissertation | LibreCat-ID: 50449
Chalicheemalapalli Jayasankar, Deviprasad. Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques, 2023.
LibreCat
| Files available
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar, Deviprasad, Tim Stallmeister, Julian Lückenkötter, and Thomas Tröster. “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” 2023.
LibreCat
| Files available
2023 | Journal Article | LibreCat-ID: 43437 |
Klowait, Nils. “On the Multimodal Resolution of a Search Sequence in Virtual Reality.” Human Behavior and Emerging Technologies 2023 (2023): 1–15. https://doi.org/10.1155/2023/8417012.
LibreCat
| Files available
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 45599
Klowait, Nils, and Maria Erofeeva. “Halting the Decay of Talk.” Social Interaction. Video-Based Studies of Human Sociality 6, no. 1 (2023). https://doi.org/10.7146/si.v6i1.136903.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52832
Weller, Julian, Daniel Roesmann, Sönke Eggert, Sebastian von Enzberg, Iris Gräßler, and Roman Dumitrescu. “Identification and Prediction of Standard Times in Machining for Precision Steel Tubes through the Usage of Data Analytics.” In Procedia CIRP, 119:514–20. Elsevier BV, 2023. https://doi.org/10.1016/j.procir.2023.01.011.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 53078
Apazeller, Sascha, Munko Gonchikzhapov, Monika Nanjaiah, Tina Kasper, Irenäus Wlokas, Hartmut Wiggers, and Christof Schulz. “A New Dual Matrix Burner for One-Dimensional Investigation of Aerosol Flames.” Proceedings of the Combustion Institute 39, no. 1 (2023): 909–18. https://doi.org/10.1016/j.proci.2022.07.166.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 53075
Kasper, Tina, and Nils Hansen. “Resonance Enhanced Multiphoton Ionization Detection of Aromatics Formation in Fuel-Rich Flames.” Combustion and Flame 257, no. 1 (2023).
LibreCat
2023 | Journal Article | LibreCat-ID: 36812
Apazeller, Sascha, Munko Gonchikzhapov, Monika Nanjaiah, Tina Kasper, Irenäus Wlokas, Hartmut Wiggers, and Christof Schulz. “A New Dual Matrix Burner for One-Dimensional Investigation of Aerosol Flames.” Proceedings of the Combustion Institute, 2023. https://doi.org/10.1016/j.proci.2022.07.166.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 53074
Kasper, Tina, and Nils Hansen. “Resonance Enhanced Multiphoton Ionization Detection of Aromatics Formation in Fuel-Rich Flames.” Combustion and Flame 257 (2023). https://doi.org/10.1016/j.combustflame.2023.112820.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44215
Gräßler, Iris, Daniel Roesmann, and Jens Pottebaum. “Human Factors in der integrierten Produktentwicklung.” Zeitschrift für wirtschaftlichen Fabrikbetrieb 118, no. 3 (2023): 149–52. https://doi.org/10.1515/zwf-2023-1029.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46500
Pottebaum, Jens, Jost Rossel, Juraj Somorovsky, Yasemin Acar, René Fahr, Patricia Arias Cabarcos, Eric Bodden, and Iris Gräßler. “Re-Envisioning Industrial Control Systems Security by Considering Human Factors as a Core Element of Defense-in-Depth.” In 2023 IEEE European Symposium on Security and Privacy Workshops (EuroS&PW), 379–85. IEEE, 2023. https://doi.org/10.1109/eurospw59978.2023.00048.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 51218 |
Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023. https://doi.org/10.26153/tsw/50931.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46862 |
Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023. https://doi.org/10.26153/tsw/50926.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 51739
Weiß, Deborah, Tobias Duffe, Moritz Buczek, Gunter Kullmer, and Britta Schramm. “Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss.” Deutscher Verband für Materialforschung und -prüfung e.V., 2023. https://doi.org/10.48447/WP-2023-244.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 29852
Beule, Felix, Dominik Teutenberg, Gerson Meschut, Tobias Aubel, and Anton Matzenmiller. “Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen.” In 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29855
Carillo Beber, Vinicius, Christof Nagel, Bernd Mayer, Christian Köster, Anton Matzenmiller, Matthias Hecht, Jörg Baumgartner, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” In 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29344
Kowatz, Jannik, Dominik Teutenberg, and Gerson Meschut. “Weiterentwicklung der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von serienrelevanten Einflussfaktoren.” In 22. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30003
Chudalla, Nick, Gerson Meschut, Aurélie Bartley, and Tim Michael Wibbeke. “Analyse Des Versagensverhaltens Geklebter Stahl-Verbindungen Beim Werkstoffschonenden Entfügen in Der Karosserieinstandsetzung.” In 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.
LibreCat
2022 | Book | LibreCat-ID: 30102
Rossel, Moritz Sebastian, and Gerson Meschut. Methodenentwicklung für die Simulation mechanischer Fügeprozesse mit besonderer Berücksichtigung fügespezifischer Reibverhältnisse. Vol. 573. EFB-Forschungsbericht. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 30222
Striewe, Marius, Gerson Meschut, Lars Schmelzle, Julia Mergheim, Gunnar Possart, and Paul Steinmann. “Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung.” In 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 30229
Klippstein, Sven Helge. “Reproducibility in Polymer Laser Sintering,” 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 28991
Gräßler, Iris, and Jens Pottebaum. “From Agile Strategic Foresight to Sustainable Mechatronic and Cyber-Physical Systems in Circular Economies.” In Design Methodology for Future Products, edited by Dieter Krause and Emil Heyden. Cham: Springer, 2022. https://doi.org/10.1007/978-3-030-78368-6_1.
LibreCat
| DOI
2022 | Patent | LibreCat-ID: 30730
Zimmer, Detmar, Lars Martin Blumenthal, and Magnus Schadomsky. “Reibscheibe Für Eine Reibungskupplung,” 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30894
Tuzgel, Firat, Emine Fulya Akbulut Irmak, Erkan Guzel, Atacan Yucesoy, Selim Sahin, Alper Tasdemirci, and Mustafa Guden. “Testing and Modeling Blast Loading of a Sandwich Structure Cored with a Bio-Inspired (Balanus) Core.” Thin-Walled Structures 175 (2022). https://doi.org/10.1016/j.tws.2022.109185.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30903
Schadomsky, Magnus, and Detmar Zimmer. “Betrieb von Federkraftbremsen bei hohen Gleitgeschwindigkeiten.” Konstruktion, no. 04 (2022): 58–64. https://doi.org/10.37544/0720-5953-2022-04-58.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29947
Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Measurement of Material Degradation in Dependence of Shear Rate, Temperature, and Residence Time.” Polymer Engineering and Science 62, no. 3 (2022): 815–23. https://doi.org/10.1002/pen.25887.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 27186
Otroshi, Mortaza, and Gerson Meschut. “Influence of Cutting Clearance and Punch Geometry on the Stress State in Small Punch Test .” Engineering Failure Analysis 136, no. c (2022). https://doi.org/10.1016/j.engfailanal.2022.106183.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30004
Chudalla, Nick, Dominik Teutenberg, Gerson Meschut, Miriam Schneider, and Dominik Smart. “Systematisierung Einer Rechnergestützten Auswertemethode Zur Versagensanalyse Geklebter Verbindungen .” In 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30911
Vorderbrüggen, Julian, Daniel Köhler, Bernd Grüber, Juliane Troschitz, Maik Gude, and Gerson Meschut. “Development of a Rivet Geometry for Solid Self-Piercing Riveting of Thermally Loaded CFRP-Metal Joints in Automotive Construction.” Composite Structures 291 (2022). https://doi.org/10.1016/j.compstruct.2022.115583.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30904
Heyser, Per, S Wiesenmayer, P Frey, T Nehls, C Scharr, W Flügge, M Merklein, and Gerson Meschut. “Consideration of the Manufacturing History of Sheet Metal Components for the Adaptation of a Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221077560.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30915
Chudalla, Nick, Gerson Meschut, Aurélie Bartley, and Tim Michael Wibbeke. “Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte.” adhäsion KLEBEN & DICHTEN 66, no. 4 (2022): 34–37. https://doi.org/10.1007/s35145-022-0576-0.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 31069
Wende, Marc, Florian Fischer, and Eugeny Kenig. “Experimentelle Untersuchung Und Modellvalidierung Zur Gravidestillation.” In Jahrestreffen Der ProcessNet Fachgruppen Fluidverfahrenstechnik Und Hochdruckverfahrenstechnik. Jahrestreffen Der ProcessNet Fachgruppen Fluidverfahrenstechnik Und Hochdruckverfahrenstechnik. Frankfurt am Main, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 31789
Hopp, Matthias, and Lisa Tölle. “Influence of Process Parameters on the Formation of Inhalable Fiber Dust during Shredding for Mechanical Recycling of Fiber‐reinforced Organo Sheets.” Journal of Applied Polymer Science, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 31788
Hopp, Matthias, Lisa Tölle, J. Bünger, G. Westphal, N. Rosenkranz, and C. Monsé. “Fiber Dust Formation during the Recycling of FRP.” Kunststoffe International, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 31787
Hopp, Matthias, Lisa Tölle, J. Bünger, G. Westphal, N. Rosenkranz, and C. Monsé. “Faserstäube Beim FVK-Recycling.” Kunststoffe, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 32155
Beule, Felix, Dominik Teutenberg, Gerson Meschut, Tobias Aubel, and Anton Matzenmiller. “Influence of Curing-Induced Pre-Deformations on the Mechanical Properties of Adhesively Bonded Joints in Steel-Intensive Mixed-Material Structures.” In Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32263
Filvan Torkaman, Najmeh, Marina Kley, Wolfgang Bremser, and René Wilhelm. “Reversible Functionalization and Exfoliation of Graphite by a Diels–Alder Reaction with Furfuryl Amine.” RSC Advances 12, no. 27 (2022): 17249–56. https://doi.org/10.1039/d2ra02566c.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 32279
Schmolke, Tobias, and Gerson Meschut. “Investigation of Leak Tightness for Bonded Steel Joints Induced by Mechanical and Corrosive Load for Use in Battery Housings.” In Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32330
Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology 19 (2022): 2369–87. https://doi.org/10.1016/j.jmrt.2022.06.006.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 32329
Chudalla, Nick, Aurélie Bartley, Jan Ditter, Gerson Meschut, and Tim Michael Wibbeke. “Disjoining and Repair Strategies of Structural Joints in Automotive Lightweight Structures,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32388
Rossel, Moritz Sebastian, and Gerson Meschut. “Method Development for Increasing the Prediction Quality of Mechanical Joining Process Simulations by Friction Modeling Based on Local Joining Process Parameters.” In Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 32446
Mügge, Nils, Alexander Kronberg, Maxim Glushenkov, and Eugeny Kenig. “Heat Regeneration Model for External Heat Engines Operating with Dense Working Fluids.” In Annual Meeting on Reaction Engineering and ProcessNet Subject Division Heat and Mass Transfer, 2022.
LibreCat
2022 | Report | LibreCat-ID: 34020
Haase, Michael, Frederik Tasche, Maximilian Bieber, and Alexander Zibart. Innovative Leichtbau- Und Kühlungskonzepte Für Elektrische Maschinen Durch Additive Fertigung (ILuKadd3D). Vol. Heft 1526. Frankfurt: Forschungsvereinigung Antriebstechnik e.V., 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34152
Otroshi, Mortaza, and Gerson Meschut. “Methodenentwicklung zur Verbesserung der Schädigungsmodellierung in der numerischen 3D-Belastungssimulation mechanischer Fügeverfahren unter Berücksichtigung der fügeinduzierten Vorbeanspruchung.” Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 34153
Otroshi, Mortaza, and Gerson Meschut. “Schädigungsmodellierung von Hilfsfügeelementen beim mechanischen Fügen von Stahlwerkstoffen.” Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34166
Gräßler, Iris, and Anna-Sophie Koch. “Evaluation Criteria in Product Idea Selection Decisions.” In XXXIII Proceedings of the ISPIM Innovation Conference. Event Proceedings: LUT Scientific and Expertise Publications. Manchester, 2022.
LibreCat
2022 | Dissertation | LibreCat-ID: 34174 |
Oleff, Christian. Proaktives Management von Anforderungsänderungen in der Entwicklung komplexer technischer Systeme. Vol. 406. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn: LibreCat University, 2022. https://doi.org/10.17619/UNIPB/1-1600.
LibreCat
| Files available
| DOI
| Download (ext.)
2022 | Dissertation | LibreCat-ID: 34272 |
Schemmel, Reinhard. Enhanced Process Development by Simulation of Ultrasonic Heavy Wire Bonding. Vol. 13. Schriften Des Lehrstuhls Für Dynamik Und Mechatronik. Shaker, 2022. https://doi.org/10.17619/UNIPB/1-1280.
LibreCat
| Files available
| DOI
| Download (ext.)
2022 | Book | LibreCat-ID: 34397
Gräßler, Iris, and Christian Oleff. Systems Engineering - verstehen und industriell umsetzen. Berlin: Springer Verlag, 2022.
LibreCat
| Files available
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34532
Abate, Alessandro, Henk Blom, Joanna Delicaris, Sofie Haesaert, Arnd Hartmanns, Birgit van Huijgevoort, Abolfazl Lavaei, et al. “ARCH-COMP22 Category Report: Stochastic Models.” In EPiC Series in Computing. EasyChair, 2022. https://doi.org/10.29007/lsvc.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 34723
Schöppner, Volker, Karina Gevers, L. Schraa, and P. Töws. “Auswirkungen Unterschiedlicher Erwärmstrategien Auf Die Quasistatische Und Zyklische Belastbarkeit von Infrarotgeschweißten, Glasfaserverstärkten Thermoplastbauteilen.” Joining Plastics, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34717
Schöppner, Volker, Florian Brüning, and L. Sommer. “A Reverse Engineering Approach for Calibrating Frictional Behavior of Contact Models for Numerical Simulation of Solids Conveying in Extruders,” 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34722
Schöppner, Volker, Dennis Kleinschmidt, U. Nillius, and C. Hopmann. “Auswirkungen Des Vorscherungseinflusses Im Extrusionsprozess Auf Die Rheologischen Kennwerte Gefüllter Kautschukmischungen.” GAK, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34721
Schöppner, Volker, Marius Dörner, Maximilian Frank, and Christoph Wilhelm Theodor Schall. “Auf Der Welle Zum Mischerfolg.” Kunststoffe, 2022.
LibreCat
2022 | Report | LibreCat-ID: 34724
Moritzer, Elmar, and Maximilian Scholle. BMC-Spritzgießen Bricht Die Glasfaser. Kunststoffland NRW, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34732
Moritzer, Elmar, Maximilian Scholle, Lisa Tölle, and J. Bomm. “Influence of Process Parameter on Fiber Quality during Fiber Recycling through Thermal Fiber Recovery.” RFP Rubber Fibres Plastics, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34729
Moritzer, Elmar, Maximilian Scholle, Lisa Tölle, and J. Bomm. “Einfluss Der Prozessführung Auf Die Faserqualität Beim Faserrecycling Mittels Thermischer Faserrückgewinnung.” GAK - Gummi Fasern Kunststoffe, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34730
Schöppner, Volker, and Dennis Kleinschmidt. “Estimation and Correction of Non-Isothermal Effects of Carbon Black-Filled Rubber Compounds in Viscosity Measurements,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34731
Moritzer, Elmar, and Maximilian Richters. “Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34738
Schöppner, Volker, Dennis Kleinschmidt, C. Hopmann, A. Limper, F. Fey, M. Facklam, and M. Schön. “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34735
Schöppner, Volker, and Florian Brüning. “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34734
Schöppner, Volker, and Jonas Köllermeier. “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” 2022.
LibreCat