Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4009 Publications
2022 | Conference Abstract | LibreCat-ID: 31871
Kletetzka, I., & Klippstein, S. H. (2022). Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag). 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben . 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben, Paderborn.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43011
Hanselle, F. P. (2022). Untersuchung und Modellierung der Materialeigenschaften von glaskugelgefüllten, im Lasersinterprozess verarbeiteten Dry-Blends.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43010
Kosanke, M. (2022). Oberflächenmodifikation von Glaskugeln zur Verbesserung der Adhäsion im Lasersinterverfahren.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43007
Henke, F. (2022). Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit).
LibreCat
2022 | Mastersthesis | LibreCat-ID: 46858
Ostermeier, J. (2022). Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver.
LibreCat
2022 | Bachelorsthesis | LibreCat-ID: 43012
Sural, I. (2022). Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft.
LibreCat
2022 | Journal Article | LibreCat-ID: 30510
Delp, A., Freund, J., Wu, S., Scholz, R., Löbbecke, M., Haubrich, J., Tröster, T., & Walther, F. (2022). Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties. Composite Structures, 285, Article 115238. https://doi.org/10.1016/j.compstruct.2022.115238
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30371
Hagedorn, O. E. C., Broll, M., Kirsch, O., Hemsel, T., & Sextro, W. (2022). Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding. CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, 138–143.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 47159
Aimiyekagbon, O. K., Bender, A., & Sextro, W. (2022). On the applicability of time series features as health indicators for technical systems operating under varying conditions. Condition Monitor, 425, 5–10.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34104
Scheidemann, C., Kirsch, O., Hemsel, T., & Sextro, W. (2022). Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding. 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). https://doi.org/10.1109/estc55720.2022.9939478
LibreCat
| DOI
2022 | Book | LibreCat-ID: 47417
Föllinger, O., Konigorski, U., Lohmann, B., Roppenecker, G., & Trächtler, A. (2022). Regelungstechnik. Einführung in die Methoden und ihre Anwendung (13th ed.). VDE-Verlag.
LibreCat
2022 | Patent | LibreCat-ID: 9980
Reinke, K., Bender, A., Meyer, T., Sextro, W., & Kimotho, J. K. (2022). Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.
LibreCat
| Files available
2022 | Journal Article | LibreCat-ID: 48360
Hopp, M., & Tölle, L. (2022). EFFECT OF SHREDDING PARAMETERS ON THE FORMATION OF AIRBORNE FIBER DUST DURING MECHANICAL RECYCLING OF FIBER-REINFORCED THERMOPLASTICS. Proceedings of the 20th European Conference on Composite Materials, Vol. 6, 119–125.
LibreCat
2022 | Conference Paper | LibreCat-ID: 48354
Moritzer, E., & Wächter, J. (2022). Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process. 37th International Conference of the Polymer Processing Society, Fukuoka (Japan).
LibreCat
2022 | Book | LibreCat-ID: 48353
Gevers, K., Schraa, L., Uhlig, K., Töws, P., & Stommel, M. (2022). Bewertung von IR-Schweißverbindungen an kurzfaserverstärkten Thermoplasten mittels digitaler Bildkorrelation: Vol. Tagung Werkstoffprüfung 2022-Werkstoffe und Bauteile auf dem Prüfstand (pp. 169–175).
LibreCat
2022 | Book | LibreCat-ID: 48356
Schöppner, V., & Vogtschmidt, S. (2022). Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten (pp. 534–540).
LibreCat
2022 | Book | LibreCat-ID: 48358
Schöppner, V., Dörner, M., Frank, M., & Schall, C. (2022). On the Wave to Successful Mixing.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29803
Hesse, M., Hunstig, M., Timmermann, J., & Trächtler, A. (2022). Batch Constrained Bayesian Optimization for UltrasonicWire Bonding Feed-forward Control Design. Proceedings of the 11th International Conference on Pattern Recognition Applications and Methods (ICPRAM), 383–394.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
Rüppel, A., Wolff, S., Oldemeier, J. P., Schöppner, V., & Heim, H.-P. (2022). Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution. Polymers, 14(15), Article 3113. https://doi.org/10.3390/polym14153113
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34001 | 
Arian, B., Homberg, W., Kersting, L., Trächtler, A., & Rozo Vasquez, J. (2022). Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen. 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, 333–347.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34003 |
Arian, B., Oesterwinter, A., Homberg, W., Rozo Vasquez, J., Walther, F., Kersting, L., & Trächtler, A. (2022). A flow forming process model to predict workpiece properties in AISI 304L. 19th Int. Conference on Metal Forming 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34011 |
Junker, A., Fittkau, N., Timmermann, J., & Trächtler, A. (2022). Autonomes Putten mittels datengetriebener und physikbasierter Methoden. Proceedings - 32. Workshop Computational Intelligence: Berlin, 1. - 2. Dezember 2022, 119–124. https://doi.org/10.5445/KSP/1000151141
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 50071 |
Junker, A., Timmermann, J., & Trächtler, A. (2022). Learning Data-Driven PCHD Models for Control Engineering Applications*. IFAC-PapersOnLine, 55(12), 389–394. https://doi.org/10.1016/j.ifacol.2022.07.343
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33852 |
Moritzer, E., & Hecker, F. (2022). VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS. In D. L. Bourell, J. J. Beaman, R. H. Crawford, D. Kovar, C. C. Seepersad, & M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium (pp. 2011–2018). https://doi.org/10.26153/tsw/44657
LibreCat
| DOI
| Download (ext.)
2022 | Newspaper Article | LibreCat-ID: 49323
Pfeifer, F., Jungeilges, A., & Behm, J. (2022). Strom statt Gas: Nachhaltige Herstellung von Karosseriebauteilen. Transforming Economies.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 49424
Merten, M., Klöppel, T., Haufe, A., Kaiser, M. A., Wesendahl, J.-N., & Konrad, S. (2022). Gekoppelte Simulation des resistiven Schnellerwärmens für Fertigungsprozesse mit integrierter Wärmebehandlung am Beispiel der Titanlegierung Ti-6Al-4V. In M. Merklein (Ed.), Workshop Warmblechumformung (Vol. 17). Lehrstuhl für Fertigungstechnologie.
LibreCat
2022 | Conference Paper | LibreCat-ID: 49433
Kaiser, M. A., Rockicki, P., Höschen, F., Wesendahl, J.-N., Konrad, S., Meyer, T., Marten, T., & Tröster, T. (2022). Heat transfer coefficient investigation for hot die quenching process of Ti-6Al-4V alloy. Titanium USA 2022 Conference , Orlando.
LibreCat
2022 | Conference Paper | LibreCat-ID: 49435
Kaiser, M. A., Wesendahl, J.-N., & Meyer, T. (n.d.). Isothermal hot forming of Titanium sheet metal - From parameter identification to custom parts. Infotag Automotive and Aerospace Applications, Berlin.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30220 |
Kletetzka, I., Gawlikowicz, R., & Schmid, H.-J. (2022). Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends. Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, 33. http://dx.doi.org/10.26153/tsw/44558
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
Kletetzka, I., Klippstein, S. H., & Schmid, H.-J. (2022). Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder. Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, 33. http://dx.doi.org/10.26153/tsw/44555
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 50744 |
Bödger, C., Weiss, C., Schiefer, E., Heussen, D., & Haefner, C. (2022). Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion. Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication, Austin.
LibreCat
| Files available
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 51197
Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., & Gude, M. (2022). Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching. Key Engineering Materials, 926, 1489–1497. https://doi.org/10.4028/p-32330d
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 51192
Busch, M., Köhler, D., Hausotte, T., Kupfer, R., Troschitz, J., & Gude, M. (2022). Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography. E-Journal of Nondestructive Testing, 27(12). https://doi.org/10.58286/27519
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 51191
Köhler, D., Kupfer, R., Troschitz, J., & Gude, M. (2022). Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen. In M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 51195
Köhler, D., Kupfer, R., Troschitz, J., & Gude, M. (2022). Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In The Minerals, Metals & Materials Series. Springer International Publishing. https://doi.org/10.1007/978-3-031-06212-4_75
LibreCat
| DOI
2022 | Mastersthesis | LibreCat-ID: 51718
Schlattmann, U., & Beimdiek, J. (2022). Charakterisierung von Schüttschichtmaterialien für den Einsatz in Filtern für häusliche Holzfeuerungsanlagen (Studienarbeit).
LibreCat
2022 | Journal Article | LibreCat-ID: 44302
Moritzer, E., Flachmann, F., Richters, M., & Neugebauer, M. (2022). Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics. Journal of Composites Science .
LibreCat
2022 | Conference Paper | LibreCat-ID: 33853 |
Moritzer, E., & Hecker, F. (2022). INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS. In D. L. Bourell, J. J. Beaman, R. H. Crawford, D. Kovar, C. C. Seepersad, & M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium (pp. 1844–1858). https://doi.org/10.26153/tsw/44654
LibreCat
| DOI
| Download (ext.)
2022 | Report | LibreCat-ID: 52045
Scheidemann, C., Hemsel, T., & Sextro, W. (2022). Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University. https://doi.org/10.2314/KXP:1879655276
LibreCat
| Files available
| DOI
2022 | Conference Abstract | LibreCat-ID: 33204
Al-Lami, A. J. S., & Kenig, E. Y. (2022). Heat transfer enhancement with internally channeled tubes. ProcessNet2022, Würzburg.
LibreCat
2022 | Book (Editor) | LibreCat-ID: 52353
Schlüter, A., & Bernabé-Moreno, J. (Eds.). (2022). Sustainable and Smart Energy Systems for Europe’s Cities and Rural Areas (1st ed.). Hanser. https://www.hanser-elibrary.com/doi/book/10.3139/9783446471757
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 36332 |
Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., & Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials, 24(10), Article 2200874. https://doi.org/10.1002/adem.202200874
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29724
Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., & Meschut, G. (2022). Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210758. https://doi.org/10.1177/14644207221075838
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29505
Neuser, M., Grydin, O., Frolov, Y., & Schaper, M. (2022). Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering. https://doi.org/10.1007/s11740-022-01106-1
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31828
Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31238
Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 29771
Grydin, O., Mortensen, D., Neuser, M., Lindholm, D., Fjaer, H. G., & Schaper, M. (2022). Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips. In Light Metals 2022. Springer International Publishing. https://doi.org/10.1007/978-3-030-92529-1_96
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52613
Böhne, C., Meschut, G., BIEGLER, M., & RETHMEIER, M. (2022). The Influence of Electrode Indentation Rate on LME Formation during RSW. Welding Journal, 101(7), 197–207. https://doi.org/10.29391/2022.101.015
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52615
Böhne, C., & Meschut, G. (2022). Reduction of flange widths in resistance spot welding by application of eccentric electrode cap geometries. Welding and Cutting, 3, 208–212. https://doi.org/10.53192/WAC202203208
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32283
Schmolke, T., Meschut, G., Rieker, F., Meinderink, D., & Grundmeier, G. (2022). Untersuchung von Klebverbindungen für Batteriegehäuse. adhäsion KLEBEN & DICHTEN , 66, 40–43. https://doi.org/10.1007/s35145-022-0596-9
LibreCat
| DOI
2022 | Bachelorsthesis | LibreCat-ID: 51666
Goncz, N., & Ponusamy, S. (2022). Untersuchung der Charakterisierung der Partikelform und deren Einfluss auf die Fließfähigkeit.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 51662
Keksel, E., & Ponusamy, S. (2022). Untersuchung eines neuen dynamischen- mechanischen Partikelverrundungsprozesses (Studienarbeit).
LibreCat
2022 | Mastersthesis | LibreCat-ID: 51664
Almohammad, A., & Ponusamy, S. (2022). Untersuchung der Polymer-Zerkleinerung in einer Kryo-Prallmühle (Studienarbeit).
LibreCat
2022 | Book Chapter | LibreCat-ID: 52410
Schlüter, A., Gonovese, M., & Fragiacomo, P. (2022). Vorbereiten auf eine nachhaltige Mobilität. In A. Schlüter & J. Bernabé-Moreno (Eds.), Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas. Hanser-Verlag .
LibreCat
2022 | Journal Article | LibreCat-ID: 34215
Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 52687
Bähr, P., Striewe, M., Meschut, G., & Sommer, S. (2022). Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau. 12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik. 12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik.
LibreCat
2022 | Book Chapter | LibreCat-ID: 52409
Scionti, E., Genovese, M., Pellinger, C., Fragiacomo, P., & Schlüter, A. (2022). Using More Hydrogen and Green Fuels. In A. Schlüter & J. Bernabé-Moreno (Eds.), Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas. Hanser-Verlag .
LibreCat
2022 | Journal Article | LibreCat-ID: 53080
Gaiser, N., Zhang, H., Bierkandt, T., Schmitt, S., Zinsmeister, J., Kathrotia, T., Hemberger, P., Shaqiri, S., Kasper, T., Aigner, M., Oßwald, P., & Köhler, M. (2022). Investigation of the combustion chemistry in laminar, low-pressure oxymethylene ether flames (OME0–4). Combustion and Flame, 243, Article 112060. https://doi.org/10.1016/j.combustflame.2022.112060
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53081
Zinsmeister, J., Gaiser, N., Melder, J., Bierkandt, T., Hemberger, P., Kasper, T., Aigner, M., Köhler, M., & Oßwald, P. (2022). On the diversity of fossil and alternative gasoline combustion chemistry: A comparative flow reactor study. Combustion and Flame, 243, Article 111961. https://doi.org/10.1016/j.combustflame.2021.111961
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53084
Grimm, S., Baik, S.-J., Hemberger, P., Kasper, T., Kempf, A. M., & Atakan, B. (2022). Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates. Journal of Materials Research, 37(9), 1558–1575. https://doi.org/10.1557/s43578-022-00566-6
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53083
Grimm, S., Hemberger, P., Kasper, T., & Atakan, B. (2022). Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor. Advanced Materials Interfaces, 9(22). https://doi.org/10.1002/admi.202200192
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 24760
Delfs, P. (2021). Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile (Vol. 22). Shaker Verlag GmbH.
LibreCat
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
Schumacher, C. (2021). Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6 (Vol. 24). Shaker Verlag.
LibreCat
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24978
Hentze, J. (2021). Berücksichtigung Selbstorganisierender Produktionssysteme in frühen Phasen der interdisziplinären Produktentwicklung. LibreCat University. https://doi.org/10.17619/UNIPB/1-1186
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 25047 |
Křivská, B., Šlapáková, M., Králík, R., Bajtošová, L., Cieslar, M., Grydin, O., Stolbchenko, M., & Schaper, M. (2021). Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip. IOP Conference Series: Materials Science and Engineering, 1178, Article 012035. https://doi.org/10.1088/1757-899x/1178/1/012035
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 25104
Göddecke, J., Meschut, G., Damm, J., Albiez, M., & Ummenhofer, T. (2021). Dämpfungseigenschaften geklebter Verbindungen - Potenzialanalyse und Klebstoffcharakterisierung. adhäsion KLEBEN & DICHTEN, 14–23. https://doi.org/10.1007/s35145-021-0520-8
LibreCat
| DOI
2021 | Book Chapter | LibreCat-ID: 25448
Heggemann, T., Sapli, H., & Homberg, W. (2021). Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates. In Forming the Future. https://doi.org/10.1007/978-3-030-75381-8_219
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 25518
Stüker, D., & Schöppner, V. (2021). Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruders. 36th International Conference of the Polymer Processing Society (PPS), Montreal.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25519
Stüker, D., & Schöppner, V. (2021). Non-Isothermal Calculation of the Pressure-Throughput-Characteristics of Single Screw Melt-Extruders. 36th International Conference of the Polymer Processing Society (PPS), Montreal.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25576
Moritzer, E., Krassmann, D., & Brikmann, J. (2021). Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting. 74th Annual Assembly of the International Institute of Welding (IIW).
LibreCat
2021 | Journal Article | LibreCat-ID: 25577
Moritzer, E., Krassmann, D., & Brikmann, J. (2021). Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten. Joining Plastics, 15(3–4).
LibreCat
2021 | Journal Article | LibreCat-ID: 28017
Heiland, S., Milkereit, B., Hoyer, K.-P., Zhuravlev, E., Keßler, O., & Schaper, M. (2021). Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. Materials. https://doi.org/10.3390/ma14237190
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 28104
Wende, M., Fischer, F., & Kenig, E. (2021). Numerical and Experimental Investigation of Zero-Gravity Distillation Units . Chemical Engineering Transactions, 88, 697–702. https://doi.org/10.3303/CET2188116
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 28440 |
Triebus, M., Reitz, A., Grydin, O., Grenz, J., Schneidt, A., Erhardt, R., Tröster, T., & Schaper, M. (2021). Forming Simulation of Tailored Press Hardened Parts. 13th European LS-DYNA Conference 2021. 13th European LS-DYNA Conference 2021, Ulm.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 28443
Rossel, M. S., & Meschut, G. (2021). Steigerung der Prognosegüte mechanischer Fügeprozesssimulationen durch den Einsatz einer fügespezifischen Reibmodellierung basierend auf einer experimentellen Parametrisierung. In FOSTA, EFB, DVS (Ed.), 11. Fügetechnisches Gemeinschaftskolloquium.
LibreCat
2021 | Journal Article | LibreCat-ID: 28448 |
Droß, M., Heyser, P., Meschut, G., Hürkamp, A., & Dröder, K. (2021). Fiber response to pin penetration in dry woven fabric using numerical analysis. Journal of Advanced Joining Processes, Article 100083. https://doi.org/10.1016/j.jajp.2021.100083
LibreCat
| DOI
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
Tröster, T., Pfeifer, F., Nacke, B., & Dietrich, A. (2021). Großserientaugliche induktive Platinenerwärmung für den Warmformprozess (Vol. P1038). Forschungsvereinigung Stahlanwendung e.V.
LibreCat
2021 | Book Chapter | LibreCat-ID: 24047
Pottebaum, J., & Schäfer, C. (2021). IT-Systeme für das Krisenmanagement. In C. Reuter (Ed.), Sicherheitskritische Mensch-Computer-Interaktion (pp. 273–294). Springer Fachmedien Wiesbaden. https://doi.org/10.1007/978-3-658-19523-6_13
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24079
Gräßler, I., Koch, A.-S., Thiele, H., & Dattner, M. (2021). Supporting Innovation Management for SMEs: A Tool for Idea Selection. Proceedings of the ISPIM Innovation Conference. The ISPIM Innovation Conference, Berlin.
LibreCat
| Download (ext.)
2021 | Newspaper Article | LibreCat-ID: 24095 |
Moritzer, E., Hecker, F., & Hirsch, A. (2021). Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen. Kunststoffland NRW report, 2021(2), 42–43.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24161
Moritzer, E., & Kröker, M. (2021). Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen. CU reports.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24165
Moritzer, E., & Kröker, M. (2021). Simulative analysis of the filling process in the 2K GITBlow process on organo sheets. SPE Antec 2021, Digital.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24166 |
Malena, K., Link, C., Mertin, S., Gausemeier, S., & Trächtler, A. (2021). Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆. 2021 IEEE Transportation Electrification Conference & Expo (ITEC). 2021 IEEE Transportation Electrification Conference & Expo (ITEC). https://doi.org/10.1109/itec51675.2021.9490087
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24168
Moritzer, E., & Wächter, J. (2021). Einfluss eines beheizten Bauraums auf die Schweißnahtqualität. Plastverarbeiter, 04, 30–32.
LibreCat
2021 | Misc | LibreCat-ID: 24278
Ponusamy, S. (2021). Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster.
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 24283
Malatyali, H., Schöppner, V., Rabeneck, N., Hanselle, F., Austermeier, L., & Karch, D. (2021). A model for the carbon fiber breakage along the twin‐screw extruder. SPE Polymers, 145–152. https://doi.org/10.1002/pls2.10040
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24315
Malatyali, H., Schöppner, V., Lochbaum, E., Bomm, I., & Hanselle, F. (2021). The Influence of Process Conditions on the Fiber Length Reduction for Recycled Carbon Fibers. SPE ANTEC. The Annual Technical Conference of the Society of Plastics Engineers (ANTEC), , USA.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24316
Malatyali, H., Schöppner, V., Akar, S. A., Hanselle, F., & Austermeier, L. (2021). Reproducibility analysis of fiber length measurements during processing with twin screw extruders. SPE ANTEC. The Annual Technical Conference of the Society of Plastics Engineers (ANTEC) .
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
Gevers, K., Schöppner, V., & Hüllermeier, E. (2021). Heated tool butt welding of two different materials – Established methods versus artificial intelligence. International Institute of Welding, online.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
Arndt, T., & Schöppner, V. (2021). Development of scale up rules for quasi-simultaneous laser transmission welding of thermoplastics. International institute of welding.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24426
Urbanek, S., Pauline, F., Magerkohl, S., Zimmer, D., Tasche, L., Schaper, M., & Ponick, B. (2021). Design and Experimental Investigation of an Additively Manufactured PMSM Rotor. https://doi.org/10.1109/IEMDC47953.2021.9449566
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24427
Magerkohl, S., & Brüggemann, J.-P. (2021). 3D-Druck in der industriellen Anwendung - Funktions- und fertigungsgerechte Konstruktion mit additiver Fertigung (Vortrag).
LibreCat
2021 | Conference Paper | LibreCat-ID: 24441
Frank, M., & Schöppner, V. (2021). DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION. ANTEC® 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24528
Hopp, M., & Mühlhoff, F. M. (2021). Separation of Multi-Component Parts for Mechanical Recycling – An Approach to Produce Hard-Soft Combinations with a Better Recyclability. 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC).
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
Moritzer, E., Hecker, F., & Hirsch, A. (2021). Kleine Tropfen, große Wirkung. Kunststoffe, 9/2021, 88–90.
LibreCat
2021 | Journal Article | LibreCat-ID: 24589
Zhuravlev, E., Milkereit, B., Yang, B., Heiland, S., Vieth, P., Voigt, M., Schaper, M., Grundmeier, G., Schick, C., & Kessler, O. (2021). Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry. Materials & Design, Article 109677. https://doi.org/10.1016/j.matdes.2021.109677
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 26173
Voswinkel, D. (2021). Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment. IOP Conference Series: Materials Science and Engineering, 1190. https://doi.org/10.1088/1757-899X/1190/1/012028
LibreCat
| Files available
| DOI
2021 | Conference Paper | LibreCat-ID: 26180
Michael, J., Grote, E.-M., Pfeifer, S., Rasor, R., Henke, C., Trächtler, A., & Kaiser, L. (2021). Towards the Concept of a Digital Green Twin for a Sustainable Product Lifecycle. 1st International Conference on Water Energy Food and Sustainability (ICoWEFS).
LibreCat
2021 | Journal Article | LibreCat-ID: 26191
Voswinkel, D., Sapli, H., Kloidt, D., Heggemann, T., Homberg, W., Grydin, O., & Schaper, M. (2021). Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment. IOP Conference Series: Materials Science and Engineering, Article 012028. https://doi.org/10.1088/1757-899x/1190/1/012028
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 26628
Malatyali, H., & Schöppner, V. (2021). Investigation of shear rates in twin-screw extruders using CFD simulations. 36th PPS. 36th International conference of the polymer processing society, Montreal .
LibreCat