Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4004 Publications
2022 | Mastersthesis | LibreCat-ID: 46858
Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver, 2022.
LibreCat
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver, 2022.
2022 | Bachelorsthesis | LibreCat-ID: 43012
Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft, Paderborn, 2022.
LibreCat
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft, Paderborn, 2022.
2022 | Journal Article | LibreCat-ID: 30510
Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties
A. Delp, J. Freund, S. Wu, R. Scholz, M. Löbbecke, J. Haubrich, T. Tröster, F. Walther, Composite Structures 285 (2022).
LibreCat
| DOI
A. Delp, J. Freund, S. Wu, R. Scholz, M. Löbbecke, J. Haubrich, T. Tröster, F. Walther, Composite Structures 285 (2022).
2022 | Conference Paper | LibreCat-ID: 30371
Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding
O.E.C. Hagedorn, M. Broll, O. Kirsch, T. Hemsel, W. Sextro, in: CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, VDE VERLAG GMBH, Berlin, 2022, pp. 138–143.
LibreCat
O.E.C. Hagedorn, M. Broll, O. Kirsch, T. Hemsel, W. Sextro, in: CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, VDE VERLAG GMBH, Berlin, 2022, pp. 138–143.
2022 | Newspaper Article | LibreCat-ID: 47159
On the applicability of time series features as health indicators for technical systems operating under varying conditions
O.K. Aimiyekagbon, A. Bender, W. Sextro, Condition Monitor (2022) 5–10.
LibreCat
O.K. Aimiyekagbon, A. Bender, W. Sextro, Condition Monitor (2022) 5–10.
2022 | Conference Paper | LibreCat-ID: 34104
Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding
C. Scheidemann, O. Kirsch, T. Hemsel, W. Sextro, in: 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC), IEEE, 2022.
LibreCat
| DOI
C. Scheidemann, O. Kirsch, T. Hemsel, W. Sextro, in: 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC), IEEE, 2022.
2022 | Book | LibreCat-ID: 47417
Regelungstechnik. Einführung in die Methoden und ihre Anwendung
O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, A. Trächtler, Regelungstechnik. Einführung in die Methoden und ihre Anwendung, 13th ed., VDE-Verlag, Berlin, 2022.
LibreCat
O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, A. Trächtler, Regelungstechnik. Einführung in die Methoden und ihre Anwendung, 13th ed., VDE-Verlag, Berlin, 2022.
2022 | Patent | LibreCat-ID: 9980
Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.
K. Reinke, A. Bender, T. Meyer, W. Sextro, J.K. Kimotho, (2022).
LibreCat
| Files available
K. Reinke, A. Bender, T. Meyer, W. Sextro, J.K. Kimotho, (2022).
2022 | Journal Article | LibreCat-ID: 48360
EFFECT OF SHREDDING PARAMETERS ON THE FORMATION OF AIRBORNE FIBER DUST DURING MECHANICAL RECYCLING OF FIBER-REINFORCED THERMOPLASTICS
M. Hopp, L. Tölle, Proceedings of the 20th European Conference on Composite Materials (2022) 119–125.
LibreCat
M. Hopp, L. Tölle, Proceedings of the 20th European Conference on Composite Materials (2022) 119–125.
2022 | Conference Paper | LibreCat-ID: 48354
Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process
E. Moritzer, J. Wächter, in: Fukuoka (Japan), 2022.
LibreCat
E. Moritzer, J. Wächter, in: Fukuoka (Japan), 2022.
2022 | Book | LibreCat-ID: 48353
Bewertung von IR-Schweißverbindungen an kurzfaserverstärkten Thermoplasten mittels digitaler Bildkorrelation
K. Gevers, L. Schraa, K. Uhlig, P. Töws, M. Stommel, Bewertung von IR-Schweißverbindungen an Kurzfaserverstärkten Thermoplasten Mittels Digitaler Bildkorrelation, 2022.
LibreCat
K. Gevers, L. Schraa, K. Uhlig, P. Töws, M. Stommel, Bewertung von IR-Schweißverbindungen an Kurzfaserverstärkten Thermoplasten Mittels Digitaler Bildkorrelation, 2022.
2022 | Book | LibreCat-ID: 48356
Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten
V. Schöppner, S. Vogtschmidt, Schweißnahtkennwerte Für Die Lebensdaueroptimierte Bauteilauslegung von Hochtemperaturbeständigen Thermoplasten, Koblenz, 2022.
LibreCat
V. Schöppner, S. Vogtschmidt, Schweißnahtkennwerte Für Die Lebensdaueroptimierte Bauteilauslegung von Hochtemperaturbeständigen Thermoplasten, Koblenz, 2022.
2022 | Book | LibreCat-ID: 48358
On the Wave to Successful Mixing
V. Schöppner, M. Dörner, M. Frank, C. Schall, On the Wave to Successful Mixing, 2022.
LibreCat
V. Schöppner, M. Dörner, M. Frank, C. Schall, On the Wave to Successful Mixing, 2022.
2022 | Conference Paper | LibreCat-ID: 29803
Batch Constrained Bayesian Optimization for UltrasonicWire Bonding Feed-forward Control Design
M. Hesse, M. Hunstig, J. Timmermann, A. Trächtler, in: Proceedings of the 11th International Conference on Pattern Recognition Applications and Methods (ICPRAM), 2022, pp. 383–394.
LibreCat
M. Hesse, M. Hunstig, J. Timmermann, A. Trächtler, in: Proceedings of the 11th International Conference on Pattern Recognition Applications and Methods (ICPRAM), 2022, pp. 383–394.
2022 | Journal Article | LibreCat-ID: 34733
Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution
A. Rüppel, S. Wolff, J.P. Oldemeier, V. Schöppner, H.-P. Heim, Polymers 14 (2022).
LibreCat
| DOI
A. Rüppel, S. Wolff, J.P. Oldemeier, V. Schöppner, H.-P. Heim, Polymers 14 (2022).
2022 | Conference Paper | LibreCat-ID: 34001 |
Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen
B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, in: 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, Aachen, 2022, pp. 333–347.
LibreCat
| Download (ext.)
B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, in: 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, Aachen, 2022, pp. 333–347.
2022 | Conference Paper | LibreCat-ID: 34003 |
A flow forming process model to predict workpiece properties in AISI 304L
B. Arian, A. Oesterwinter, W. Homberg, J. Rozo Vasquez, F. Walther, L. Kersting, A. Trächtler, in: 19th Int. Conference on Metal Forming 2022, 2022.
LibreCat
| Download (ext.)
B. Arian, A. Oesterwinter, W. Homberg, J. Rozo Vasquez, F. Walther, L. Kersting, A. Trächtler, in: 19th Int. Conference on Metal Forming 2022, 2022.
2022 | Conference Paper | LibreCat-ID: 34011 |
Autonomes Putten mittels datengetriebener und physikbasierter Methoden
A. Junker, N. Fittkau, J. Timmermann, A. Trächtler, in: Proceedings - 32. Workshop Computational Intelligence: Berlin, 1. - 2. Dezember 2022, 2022, pp. 119–124.
LibreCat
| DOI
| Download (ext.)
A. Junker, N. Fittkau, J. Timmermann, A. Trächtler, in: Proceedings - 32. Workshop Computational Intelligence: Berlin, 1. - 2. Dezember 2022, 2022, pp. 119–124.
2022 | Journal Article | LibreCat-ID: 50071 |
Learning Data-Driven PCHD Models for Control Engineering Applications*
A. Junker, J. Timmermann, A. Trächtler, IFAC-PapersOnLine 55 (2022) 389–394.
LibreCat
| DOI
| Download (ext.)
A. Junker, J. Timmermann, A. Trächtler, IFAC-PapersOnLine 55 (2022) 389–394.
2022 | Conference Paper | LibreCat-ID: 33852 |
VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 2011–2018.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 2011–2018.
2022 | Newspaper Article | LibreCat-ID: 49323
Strom statt Gas: Nachhaltige Herstellung von Karosseriebauteilen
F. Pfeifer, A. Jungeilges, J. Behm, Transforming Economies (2022).
LibreCat
| Download (ext.)
F. Pfeifer, A. Jungeilges, J. Behm, Transforming Economies (2022).
2022 | Conference Paper | LibreCat-ID: 49424
Gekoppelte Simulation des resistiven Schnellerwärmens für Fertigungsprozesse mit integrierter Wärmebehandlung am Beispiel der Titanlegierung Ti-6Al-4V
M. Merten, T. Klöppel, A. Haufe, M.A. Kaiser, J.-N. Wesendahl, S. Konrad, in: M. Merklein (Ed.), Workshop Warmblechumformung, Lehrstuhl für Fertigungstechnologie, Erlangen, 2022.
LibreCat
M. Merten, T. Klöppel, A. Haufe, M.A. Kaiser, J.-N. Wesendahl, S. Konrad, in: M. Merklein (Ed.), Workshop Warmblechumformung, Lehrstuhl für Fertigungstechnologie, Erlangen, 2022.
2022 | Conference Paper | LibreCat-ID: 49433
Heat transfer coefficient investigation for hot die quenching process of Ti-6Al-4V alloy
M.A. Kaiser, P. Rockicki, F. Höschen, J.-N. Wesendahl, S. Konrad, T. Meyer, T. Marten, T. Tröster, in: 2022.
LibreCat
M.A. Kaiser, P. Rockicki, F. Höschen, J.-N. Wesendahl, S. Konrad, T. Meyer, T. Marten, T. Tröster, in: 2022.
2022 | Conference Paper | LibreCat-ID: 49435
Isothermal hot forming of Titanium sheet metal - From parameter identification to custom parts
M.A. Kaiser, J.-N. Wesendahl, T. Meyer, in: n.d.
LibreCat
M.A. Kaiser, J.-N. Wesendahl, T. Meyer, in: n.d.
2022 | Conference Paper | LibreCat-ID: 30220 |
Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
2022 | Conference Paper | LibreCat-ID: 32874 |
Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
2022 | Conference Paper | LibreCat-ID: 50744 |
Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, C. Haefner, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
LibreCat
| Files available
| Download (ext.)
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, C. Haefner, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
2022 | Journal Article | LibreCat-ID: 51197
Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, Key Engineering Materials 926 (2022) 1489–1497.
LibreCat
| DOI
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, Key Engineering Materials 926 (2022) 1489–1497.
2022 | Journal Article | LibreCat-ID: 51192
Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, E-Journal of Nondestructive Testing 27 (2022).
LibreCat
| DOI
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, E-Journal of Nondestructive Testing 27 (2022).
2022 | Conference Paper | LibreCat-ID: 51191
Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.
LibreCat
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: M. Zimmermann (Ed.), Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.
2022 | Book Chapter | LibreCat-ID: 51195
Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: The Minerals, Metals & Materials Series, Springer International Publishing, Cham, 2022.
2022 | Mastersthesis | LibreCat-ID: 51718
Charakterisierung von Schüttschichtmaterialien für den Einsatz in Filtern für häusliche Holzfeuerungsanlagen (Studienarbeit)
U. Schlattmann, J. Beimdiek, Charakterisierung von Schüttschichtmaterialien für den Einsatz in Filtern für häusliche Holzfeuerungsanlagen (Studienarbeit), Paderborn, 2022.
LibreCat
U. Schlattmann, J. Beimdiek, Charakterisierung von Schüttschichtmaterialien für den Einsatz in Filtern für häusliche Holzfeuerungsanlagen (Studienarbeit), Paderborn, 2022.
2022 | Journal Article | LibreCat-ID: 44302
Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics
E. Moritzer, F. Flachmann, M. Richters, M. Neugebauer, Journal of Composites Science (2022).
LibreCat
E. Moritzer, F. Flachmann, M. Richters, M. Neugebauer, Journal of Composites Science (2022).
2022 | Conference Paper | LibreCat-ID: 33853 |
INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
2022 | Report | LibreCat-ID: 52045
Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen
C. Scheidemann, T. Hemsel, W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen, LibreCat University, 2022.
LibreCat
| Files available
| DOI
C. Scheidemann, T. Hemsel, W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen, LibreCat University, 2022.
2022 | Conference Abstract | LibreCat-ID: 33204
Heat transfer enhancement with internally channeled tubes
A.J.S. Al-Lami, E.Y. Kenig, in: 2022.
LibreCat
A.J.S. Al-Lami, E.Y. Kenig, in: 2022.
2022 | Book (Editor) | LibreCat-ID: 52353
Sustainable and Smart Energy Systems for Europe's Cities and Rural Areas
A. Schlüter, J. Bernabé-Moreno, eds., Sustainable and Smart Energy Systems for Europe’s Cities and Rural Areas, 1st ed., Hanser, München, 2022.
LibreCat
| DOI
A. Schlüter, J. Bernabé-Moreno, eds., Sustainable and Smart Energy Systems for Europe’s Cities and Rural Areas, 1st ed., Hanser, München, 2022.
2022 | Journal Article | LibreCat-ID: 36332 |
Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
LibreCat
| DOI
| Download (ext.)
M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
2022 | Journal Article | LibreCat-ID: 29724
Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 29505
Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).
LibreCat
| DOI
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 31828
Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
2022 | Journal Article | LibreCat-ID: 31238
Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak, J. Troschitz, Journal of Advanced Joining Processes (2022).
LibreCat
| DOI
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak, J. Troschitz, Journal of Advanced Joining Processes (2022).
2022 | Book Chapter | LibreCat-ID: 29771
Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper, in: Light Metals 2022, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper, in: Light Metals 2022, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 52613
The Influence of Electrode Indentation Rate on LME Formation during RSW
C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022) 197–207.
LibreCat
| DOI
C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022) 197–207.
2022 | Journal Article | LibreCat-ID: 52615
Reduction of flange widths in resistance spot welding by application of eccentric electrode cap geometries
C. Böhne, G. Meschut, Welding and Cutting 3 (2022) 208–212.
LibreCat
| DOI
C. Böhne, G. Meschut, Welding and Cutting 3 (2022) 208–212.
2022 | Journal Article | LibreCat-ID: 32283
Untersuchung von Klebverbindungen für Batteriegehäuse
T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, G. Grundmeier, adhäsion KLEBEN & DICHTEN 66 (2022) 40–43.
LibreCat
| DOI
T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, G. Grundmeier, adhäsion KLEBEN & DICHTEN 66 (2022) 40–43.
2022 | Bachelorsthesis | LibreCat-ID: 51666
Untersuchung der Charakterisierung der Partikelform und deren Einfluss auf die Fließfähigkeit
N. Goncz, S. Ponusamy, Untersuchung Der Charakterisierung Der Partikelform Und Deren Einfluss Auf Die Fließfähigkeit, Paderborn University, 2022.
LibreCat
N. Goncz, S. Ponusamy, Untersuchung Der Charakterisierung Der Partikelform Und Deren Einfluss Auf Die Fließfähigkeit, Paderborn University, 2022.
2022 | Mastersthesis | LibreCat-ID: 51662
Untersuchung eines neuen dynamischen- mechanischen Partikelverrundungsprozesses (Studienarbeit)
E. Keksel, S. Ponusamy, Untersuchung Eines Neuen Dynamischen- Mechanischen Partikelverrundungsprozesses (Studienarbeit), Paderborn University, 2022.
LibreCat
E. Keksel, S. Ponusamy, Untersuchung Eines Neuen Dynamischen- Mechanischen Partikelverrundungsprozesses (Studienarbeit), Paderborn University, 2022.
2022 | Mastersthesis | LibreCat-ID: 51664
Untersuchung der Polymer-Zerkleinerung in einer Kryo-Prallmühle (Studienarbeit)
A. Almohammad, S. Ponusamy, Untersuchung Der Polymer-Zerkleinerung in Einer Kryo-Prallmühle (Studienarbeit), Paderborn University, 2022.
LibreCat
A. Almohammad, S. Ponusamy, Untersuchung Der Polymer-Zerkleinerung in Einer Kryo-Prallmühle (Studienarbeit), Paderborn University, 2022.
2022 | Book Chapter | LibreCat-ID: 52410
Vorbereiten auf eine nachhaltige Mobilität
A. Schlüter, M. Gonovese, P. Fragiacomo, in: A. Schlüter, J. Bernabé-Moreno (Eds.), Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas, Hanser-Verlag , 2022.
LibreCat
A. Schlüter, M. Gonovese, P. Fragiacomo, in: A. Schlüter, J. Bernabé-Moreno (Eds.), Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas, Hanser-Verlag , 2022.
2022 | Journal Article | LibreCat-ID: 34215
Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
2022 | Conference Abstract | LibreCat-ID: 52687
Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau
P. Bähr, M. Striewe, G. Meschut, S. Sommer, in: 12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.
LibreCat
P. Bähr, M. Striewe, G. Meschut, S. Sommer, in: 12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.
2022 | Book Chapter | LibreCat-ID: 52409
Using More Hydrogen and Green Fuels
E. Scionti, M. Genovese, C. Pellinger, P. Fragiacomo, A. Schlüter, in: A. Schlüter, J. Bernabé-Moreno (Eds.), Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas, Hanser-Verlag , 2022.
LibreCat
E. Scionti, M. Genovese, C. Pellinger, P. Fragiacomo, A. Schlüter, in: A. Schlüter, J. Bernabé-Moreno (Eds.), Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas, Hanser-Verlag , 2022.
2022 | Journal Article | LibreCat-ID: 53080
Investigation of the combustion chemistry in laminar, low-pressure oxymethylene ether flames (OME0–4)
N. Gaiser, H. Zhang, T. Bierkandt, S. Schmitt, J. Zinsmeister, T. Kathrotia, P. Hemberger, S. Shaqiri, T. Kasper, M. Aigner, P. Oßwald, M. Köhler, Combustion and Flame 243 (2022).
LibreCat
| DOI
N. Gaiser, H. Zhang, T. Bierkandt, S. Schmitt, J. Zinsmeister, T. Kathrotia, P. Hemberger, S. Shaqiri, T. Kasper, M. Aigner, P. Oßwald, M. Köhler, Combustion and Flame 243 (2022).
2022 | Journal Article | LibreCat-ID: 53081
On the diversity of fossil and alternative gasoline combustion chemistry: A comparative flow reactor study
J. Zinsmeister, N. Gaiser, J. Melder, T. Bierkandt, P. Hemberger, T. Kasper, M. Aigner, M. Köhler, P. Oßwald, Combustion and Flame 243 (2022).
LibreCat
| DOI
J. Zinsmeister, N. Gaiser, J. Melder, T. Bierkandt, P. Hemberger, T. Kasper, M. Aigner, M. Köhler, P. Oßwald, Combustion and Flame 243 (2022).
2022 | Journal Article | LibreCat-ID: 53084
Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates
S. Grimm, S.-J. Baik, P. Hemberger, T. Kasper, A.M. Kempf, B. Atakan, Journal of Materials Research 37 (2022) 1558–1575.
LibreCat
| DOI
S. Grimm, S.-J. Baik, P. Hemberger, T. Kasper, A.M. Kempf, B. Atakan, Journal of Materials Research 37 (2022) 1558–1575.
2022 | Journal Article | LibreCat-ID: 53083
Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor
S. Grimm, P. Hemberger, T. Kasper, B. Atakan, Advanced Materials Interfaces 9 (2022).
LibreCat
| DOI
S. Grimm, P. Hemberger, T. Kasper, B. Atakan, Advanced Materials Interfaces 9 (2022).
2021 | Dissertation | LibreCat-ID: 24760
Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, Shaker Verlag GmbH, Düren, 2021.
LibreCat
| Download (ext.)
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, Shaker Verlag GmbH, Düren, 2021.
2021 | Dissertation | LibreCat-ID: 24770
Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, Shaker Verlag, Düren, 2021.
LibreCat
| Download (ext.)
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, Shaker Verlag, Düren, 2021.
2021 | Dissertation | LibreCat-ID: 24978
Berücksichtigung Selbstorganisierender Produktionssysteme in frühen Phasen der interdisziplinären Produktentwicklung
J. Hentze, Berücksichtigung Selbstorganisierender Produktionssysteme in frühen Phasen der interdisziplinären Produktentwicklung, LibreCat University, 2021.
LibreCat
| DOI
J. Hentze, Berücksichtigung Selbstorganisierender Produktionssysteme in frühen Phasen der interdisziplinären Produktentwicklung, LibreCat University, 2021.
2021 | Conference Paper | LibreCat-ID: 25047 |
Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip
B. Křivská, M. Šlapáková, R. Králík, L. Bajtošová, M. Cieslar, O. Grydin, M. Stolbchenko, M. Schaper, in: IOP Conference Series: Materials Science and Engineering, 2021.
LibreCat
| DOI
| Download (ext.)
B. Křivská, M. Šlapáková, R. Králík, L. Bajtošová, M. Cieslar, O. Grydin, M. Stolbchenko, M. Schaper, in: IOP Conference Series: Materials Science and Engineering, 2021.
2021 | Journal Article | LibreCat-ID: 25104
Dämpfungseigenschaften geklebter Verbindungen - Potenzialanalyse und Klebstoffcharakterisierung
J. Göddecke, G. Meschut, J. Damm, M. Albiez, T. Ummenhofer, adhäsion KLEBEN & DICHTEN (2021) 14–23.
LibreCat
| DOI
J. Göddecke, G. Meschut, J. Damm, M. Albiez, T. Ummenhofer, adhäsion KLEBEN & DICHTEN (2021) 14–23.
2021 | Book Chapter | LibreCat-ID: 25448
Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates
T. Heggemann, H. Sapli, W. Homberg, in: Forming the Future, Cham, 2021.
LibreCat
| DOI
T. Heggemann, H. Sapli, W. Homberg, in: Forming the Future, Cham, 2021.
2021 | Conference Paper | LibreCat-ID: 25518
Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruders
D. Stüker, V. Schöppner, in: 2021.
LibreCat
D. Stüker, V. Schöppner, in: 2021.
2021 | Conference Paper | LibreCat-ID: 25519
Non-Isothermal Calculation of the Pressure-Throughput-Characteristics of Single Screw Melt-Extruders
D. Stüker, V. Schöppner, in: 2021.
LibreCat
D. Stüker, V. Schöppner, in: 2021.
2021 | Conference Paper | LibreCat-ID: 25576
Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting
E. Moritzer, D. Krassmann, J. Brikmann, in: 2021.
LibreCat
E. Moritzer, D. Krassmann, J. Brikmann, in: 2021.
2021 | Journal Article | LibreCat-ID: 25577
Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten
E. Moritzer, D. Krassmann, J. Brikmann, Joining Plastics 15 (2021).
LibreCat
E. Moritzer, D. Krassmann, J. Brikmann, Joining Plastics 15 (2021).
2021 | Journal Article | LibreCat-ID: 28017
Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, M. Schaper, Materials (2021).
LibreCat
| Files available
| DOI
| Download (ext.)
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, M. Schaper, Materials (2021).
2021 | Journal Article | LibreCat-ID: 28104
Numerical and Experimental Investigation of Zero-Gravity Distillation Units
M. Wende, F. Fischer, E. Kenig, Chemical Engineering Transactions 88 (2021) 697–702.
LibreCat
| DOI
M. Wende, F. Fischer, E. Kenig, Chemical Engineering Transactions 88 (2021) 697–702.
2021 | Conference Paper | LibreCat-ID: 28440 |
Forming Simulation of Tailored Press Hardened Parts
M. Triebus, A. Reitz, O. Grydin, J. Grenz, A. Schneidt, R. Erhardt, T. Tröster, M. Schaper, in: 13th European LS-DYNA Conference 2021, 2021.
LibreCat
| Download (ext.)
M. Triebus, A. Reitz, O. Grydin, J. Grenz, A. Schneidt, R. Erhardt, T. Tröster, M. Schaper, in: 13th European LS-DYNA Conference 2021, 2021.
2021 | Conference Paper | LibreCat-ID: 28443
Steigerung der Prognosegüte mechanischer Fügeprozesssimulationen durch den Einsatz einer fügespezifischen Reibmodellierung basierend auf einer experimentellen Parametrisierung
M.S. Rossel, G. Meschut, in: FOSTA, EFB, DVS (Ed.), 11. Fügetechnisches Gemeinschaftskolloquium, 2021.
LibreCat
M.S. Rossel, G. Meschut, in: FOSTA, EFB, DVS (Ed.), 11. Fügetechnisches Gemeinschaftskolloquium, 2021.
2021 | Journal Article | LibreCat-ID: 28448 |
Fiber response to pin penetration in dry woven fabric using numerical analysis
M. Droß, P. Heyser, G. Meschut, A. Hürkamp, K. Dröder, Journal of Advanced Joining Processes (2021).
LibreCat
| DOI
| Download (ext.)
M. Droß, P. Heyser, G. Meschut, A. Hürkamp, K. Dröder, Journal of Advanced Joining Processes (2021).
2021 | Book | LibreCat-ID: 28461
Großserientaugliche induktive Platinenerwärmung für den Warmformprozess
T. Tröster, F. Pfeifer, B. Nacke, A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, Forschungsvereinigung Stahlanwendung e.V., Düsseldorf, 2021.
LibreCat
T. Tröster, F. Pfeifer, B. Nacke, A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, Forschungsvereinigung Stahlanwendung e.V., Düsseldorf, 2021.
2021 | Book Chapter | LibreCat-ID: 24047
IT-Systeme für das Krisenmanagement
J. Pottebaum, C. Schäfer, in: C. Reuter (Ed.), Sicherheitskritische Mensch-Computer-Interaktion, Springer Fachmedien Wiesbaden, Wiesbaden, 2021, pp. 273–294.
LibreCat
| DOI
J. Pottebaum, C. Schäfer, in: C. Reuter (Ed.), Sicherheitskritische Mensch-Computer-Interaktion, Springer Fachmedien Wiesbaden, Wiesbaden, 2021, pp. 273–294.
2021 | Conference Paper | LibreCat-ID: 24079
Supporting Innovation Management for SMEs: A Tool for Idea Selection
I. Gräßler, A.-S. Koch, H. Thiele, M. Dattner, in: Proceedings of the ISPIM Innovation Conference, LUT Scientific and Expertise Publications, Berlin, 2021.
LibreCat
| Download (ext.)
I. Gräßler, A.-S. Koch, H. Thiele, M. Dattner, in: Proceedings of the ISPIM Innovation Conference, LUT Scientific and Expertise Publications, Berlin, 2021.
2021 | Newspaper Article | LibreCat-ID: 24095 |
Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffland NRW report 2021 (2021) 42–43.
LibreCat
| Download (ext.)
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffland NRW report 2021 (2021) 42–43.
2021 | Journal Article | LibreCat-ID: 24161
Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen
E. Moritzer, M. Kröker, CU reports (2021).
LibreCat
E. Moritzer, M. Kröker, CU reports (2021).
2021 | Conference Paper | LibreCat-ID: 24165
Simulative analysis of the filling process in the 2K GITBlow process on organo sheets
E. Moritzer, M. Kröker, in: 2021.
LibreCat
E. Moritzer, M. Kröker, in: 2021.
2021 | Conference Paper | LibreCat-ID: 24166 |
Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆
K. Malena, C. Link, S. Mertin, S. Gausemeier, A. Trächtler, in: 2021 IEEE Transportation Electrification Conference & Expo (ITEC), IEEE, Chicago, IL, USA , 2021.
LibreCat
| Files available
| DOI
| Download (ext.)
K. Malena, C. Link, S. Mertin, S. Gausemeier, A. Trächtler, in: 2021 IEEE Transportation Electrification Conference & Expo (ITEC), IEEE, Chicago, IL, USA , 2021.
2021 | Journal Article | LibreCat-ID: 24168
Einfluss eines beheizten Bauraums auf die Schweißnahtqualität
E. Moritzer, J. Wächter, Plastverarbeiter (2021) 30–32.
LibreCat
E. Moritzer, J. Wächter, Plastverarbeiter (2021) 30–32.
2021 | Misc | LibreCat-ID: 24278
Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster
S. Ponusamy, Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster, 2021.
LibreCat
| Files available
S. Ponusamy, Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster, 2021.
2021 | Journal Article | LibreCat-ID: 24283
A model for the carbon fiber breakage along the twin‐screw extruder
H. Malatyali, V. Schöppner, N. Rabeneck, F. Hanselle, L. Austermeier, D. Karch, SPE Polymers (2021) 145–152.
LibreCat
| DOI
H. Malatyali, V. Schöppner, N. Rabeneck, F. Hanselle, L. Austermeier, D. Karch, SPE Polymers (2021) 145–152.
2021 | Conference Paper | LibreCat-ID: 24315
The Influence of Process Conditions on the Fiber Length Reduction for Recycled Carbon Fibers
H. Malatyali, V. Schöppner, E. Lochbaum, I. Bomm, F. Hanselle, in: SPE ANTEC, 2021.
LibreCat
H. Malatyali, V. Schöppner, E. Lochbaum, I. Bomm, F. Hanselle, in: SPE ANTEC, 2021.
2021 | Conference Paper | LibreCat-ID: 24316
Reproducibility analysis of fiber length measurements during processing with twin screw extruders
H. Malatyali, V. Schöppner, S.A. Akar, F. Hanselle, L. Austermeier, in: SPE ANTEC, 2021.
LibreCat
H. Malatyali, V. Schöppner, S.A. Akar, F. Hanselle, L. Austermeier, in: SPE ANTEC, 2021.
2021 | Conference Paper | LibreCat-ID: 24382
Heated tool butt welding of two different materials – Established methods versus artificial intelligence
K. Gevers, V. Schöppner, E. Hüllermeier, in: 2021.
LibreCat
K. Gevers, V. Schöppner, E. Hüllermeier, in: 2021.
2021 | Conference Paper | LibreCat-ID: 24389
Development of scale up rules for quasi-simultaneous laser transmission welding of thermoplastics
T. Arndt, V. Schöppner, in: 2021.
LibreCat
T. Arndt, V. Schöppner, in: 2021.
2021 | Conference Paper | LibreCat-ID: 24426
Design and Experimental Investigation of an Additively Manufactured PMSM Rotor
S. Urbanek, F. Pauline, S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, B. Ponick, in: 2021.
LibreCat
| DOI
| Download (ext.)
S. Urbanek, F. Pauline, S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, B. Ponick, in: 2021.
2021 | Conference Paper | LibreCat-ID: 24427
3D-Druck in der industriellen Anwendung - Funktions- und fertigungsgerechte Konstruktion mit additiver Fertigung (Vortrag)
S. Magerkohl, J.-P. Brüggemann, in: 2021.
LibreCat
S. Magerkohl, J.-P. Brüggemann, in: 2021.
2021 | Conference Paper | LibreCat-ID: 24441
DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION
M. Frank, V. Schöppner, in: ANTEC® 2021, 2021.
LibreCat
M. Frank, V. Schöppner, in: ANTEC® 2021, 2021.
2021 | Conference Paper | LibreCat-ID: 24528
Separation of Multi-Component Parts for Mechanical Recycling – An Approach to Produce Hard-Soft Combinations with a Better Recyclability
M. Hopp, F.M. Mühlhoff, in: 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), USA, 2021.
LibreCat
M. Hopp, F.M. Mühlhoff, in: 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), USA, 2021.
2021 | Newspaper Article | LibreCat-ID: 24556
Kleine Tropfen, große Wirkung
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffe (2021) 88–90.
LibreCat
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffe (2021) 88–90.
2021 | Journal Article | LibreCat-ID: 24589
Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry
E. Zhuravlev, B. Milkereit, B. Yang, S. Heiland, P. Vieth, M. Voigt, M. Schaper, G. Grundmeier, C. Schick, O. Kessler, Materials & Design (2021).
LibreCat
| DOI
E. Zhuravlev, B. Milkereit, B. Yang, S. Heiland, P. Vieth, M. Voigt, M. Schaper, G. Grundmeier, C. Schick, O. Kessler, Materials & Design (2021).
2021 | Journal Article | LibreCat-ID: 26173
Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment
D. Voswinkel, IOP Conference Series: Materials Science and Engineering 1190 (2021).
LibreCat
| Files available
| DOI
D. Voswinkel, IOP Conference Series: Materials Science and Engineering 1190 (2021).
2021 | Conference Paper | LibreCat-ID: 26180
Towards the Concept of a Digital Green Twin for a Sustainable Product Lifecycle
J. Michael, E.-M. Grote, S. Pfeifer, R. Rasor, C. Henke, A. Trächtler, L. Kaiser, in: 2021.
LibreCat
J. Michael, E.-M. Grote, S. Pfeifer, R. Rasor, C. Henke, A. Trächtler, L. Kaiser, in: 2021.
2021 | Journal Article | LibreCat-ID: 26191
Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment
D. Voswinkel, H. Sapli, D. Kloidt, T. Heggemann, W. Homberg, O. Grydin, M. Schaper, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat
| DOI
D. Voswinkel, H. Sapli, D. Kloidt, T. Heggemann, W. Homberg, O. Grydin, M. Schaper, IOP Conference Series: Materials Science and Engineering (2021).
2021 | Conference Paper | LibreCat-ID: 26628
Investigation of shear rates in twin-screw extruders using CFD simulations
H. Malatyali, V. Schöppner, in: 36th PPS, 2021.
LibreCat
H. Malatyali, V. Schöppner, in: 36th PPS, 2021.
2021 | Conference Paper | LibreCat-ID: 26629
Investigation of the influence of process and screw configurations on fiber length distribution for recycled carbon fiber
H. Malatyali, V. Schöppner, T. Hoemann, in: 36th PPS, 2021.
LibreCat
H. Malatyali, V. Schöppner, T. Hoemann, in: 36th PPS, 2021.
2021 | Conference Paper | LibreCat-ID: 26630
Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder
M. Altepeter, V. Schöppner, S. Wanke, in: 2021.
LibreCat
M. Altepeter, V. Schöppner, S. Wanke, in: 2021.
2021 | Book | LibreCat-ID: 26649
Mechanisches Fügen von FKV-FKV-Verbindungen
D. Han, G. Meschut, Mechanisches Fügen von FKV-FKV-Verbindungen, 2021.
LibreCat
D. Han, G. Meschut, Mechanisches Fügen von FKV-FKV-Verbindungen, 2021.
2021 | Dissertation | LibreCat-ID: 26880
Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality
P. Taplick, Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality, LibreCat University, 2021.
LibreCat
| DOI
P. Taplick, Kollaborative, virtuelle Kreativumgebungen - Unterstützung der Ideengenerierung durch Virtual Reality, LibreCat University, 2021.