Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4009 Publications
2022 | Conference Abstract | LibreCat-ID: 31871
I. Kletetzka and S. H. Klippstein, “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag),” presented at the 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben, Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43011
F. P. Hanselle, Untersuchung und Modellierung der Materialeigenschaften von glaskugelgefüllten, im Lasersinterprozess verarbeiteten Dry-Blends. 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43010
M. Kosanke, Oberflächenmodifikation von Glaskugeln zur Verbesserung der Adhäsion im Lasersinterverfahren. Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43007
F. Henke, Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit). Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 46858
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver. 2022.
LibreCat
2022 | Bachelorsthesis | LibreCat-ID: 43012
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft. Paderborn, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30510
A. Delp et al., “Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties,” Composite Structures, vol. 285, Art. no. 115238, 2022, doi: 10.1016/j.compstruct.2022.115238.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30371
O. E. C. Hagedorn, M. Broll, O. Kirsch, T. Hemsel, and W. Sextro, “Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding,” in CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, Berlin, 2022, pp. 138–143.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 47159
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “On the applicability of time series features as health indicators for technical systems operating under varying conditions,” Condition Monitor, no. 425, pp. 5–10, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34104
C. Scheidemann, O. Kirsch, T. Hemsel, and W. Sextro, “Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding,” 2022, doi: 10.1109/estc55720.2022.9939478.
LibreCat
| DOI
2022 | Book | LibreCat-ID: 47417
O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, and A. Trächtler, Regelungstechnik. Einführung in die Methoden und ihre Anwendung, 13th ed. Berlin: VDE-Verlag, 2022.
LibreCat
2022 | Patent | LibreCat-ID: 9980
K. Reinke, A. Bender, T. Meyer, W. Sextro, and J. K. Kimotho, “Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.” 2022.
LibreCat
| Files available
2022 | Journal Article | LibreCat-ID: 48360
M. Hopp and L. Tölle, “EFFECT OF SHREDDING PARAMETERS ON THE FORMATION OF AIRBORNE FIBER DUST DURING MECHANICAL RECYCLING OF FIBER-REINFORCED THERMOPLASTICS,” Proceedings of the 20th European Conference on Composite Materials, no. Vol. 6, pp. 119–125, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 48354
E. Moritzer and J. Wächter, “Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process,” presented at the 37th International Conference of the Polymer Processing Society, Fukuoka (Japan), 2022.
LibreCat
2022 | Book | LibreCat-ID: 48353
K. Gevers, L. Schraa, K. Uhlig, P. Töws, and M. Stommel, Bewertung von IR-Schweißverbindungen an kurzfaserverstärkten Thermoplasten mittels digitaler Bildkorrelation, vol. Tagung Werkstoffprüfung 2022-Werkstoffe und Bauteile auf dem Prüfstand. 2022, pp. 169–175.
LibreCat
2022 | Book | LibreCat-ID: 48356
V. Schöppner and S. Vogtschmidt, Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Koblenz, 2022, pp. 534–540.
LibreCat
2022 | Book | LibreCat-ID: 48358
V. Schöppner, M. Dörner, M. Frank, and C. Schall, On the Wave to Successful Mixing. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29803
M. Hesse, M. Hunstig, J. Timmermann, and A. Trächtler, “Batch Constrained Bayesian Optimization for UltrasonicWire Bonding Feed-forward Control Design,” in Proceedings of the 11th International Conference on Pattern Recognition Applications and Methods (ICPRAM), Online, 2022, pp. 383–394.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,” Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi: 10.3390/polym14153113.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34001 | 
B. Arian, W. Homberg, L. Kersting, A. Trächtler, and J. Rozo Vasquez, “Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen,” in 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form geben“, 2022, pp. 333–347.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34003 |
B. Arian et al., “A flow forming process model to predict workpiece properties in AISI 304L,” 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34011 |
A. Junker, N. Fittkau, J. Timmermann, and A. Trächtler, “Autonomes Putten mittels datengetriebener und physikbasierter Methoden,” in Proceedings - 32. Workshop Computational Intelligence: Berlin, 1. - 2. Dezember 2022, Berlin, Germany, 2022, pp. 119–124, doi: 10.5445/KSP/1000151141.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 50071 |
A. Junker, J. Timmermann, and A. Trächtler, “Learning Data-Driven PCHD Models for Control Engineering Applications*,” IFAC-PapersOnLine, vol. 55, no. 12, pp. 389–394, 2022, doi: 10.1016/j.ifacol.2022.07.343.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33852 |
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Newspaper Article | LibreCat-ID: 49323
F. Pfeifer, A. Jungeilges, and J. Behm, “Strom statt Gas: Nachhaltige Herstellung von Karosseriebauteilen,” Transforming Economies, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 49424
M. Merten, T. Klöppel, A. Haufe, M. A. Kaiser, J.-N. Wesendahl, and S. Konrad, “Gekoppelte Simulation des resistiven Schnellerwärmens für Fertigungsprozesse mit integrierter Wärmebehandlung am Beispiel der Titanlegierung Ti-6Al-4V,” in Workshop Warmblechumformung, Fürth, 2022, vol. 17.
LibreCat
2022 | Conference Paper | LibreCat-ID: 49433
M. A. Kaiser et al., “ Heat transfer coefficient investigation for hot die quenching process of Ti-6Al-4V alloy,” presented at the Titanium USA 2022 Conference , Orlando, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 49435
M. A. Kaiser, J.-N. Wesendahl, and T. Meyer, “Isothermal hot forming of Titanium sheet metal - From parameter identification to custom parts,” presented at the Infotag Automotive and Aerospace Applications, Berlin.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30220 |
I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44558.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 50744 |
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, and C. Haefner, “Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion,” presented at the Solid Freeform Fabrication, Austin, 2022.
LibreCat
| Files available
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 51197
D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching,” Key Engineering Materials, vol. 926, pp. 1489–1497, 2022, doi: 10.4028/p-32330d.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 51192
M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, and M. Gude, “Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography,” e-Journal of Nondestructive Testing, vol. 27, no. 12, 2022, doi: 10.58286/27519.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 51191
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen,” in Tagungsband zur Werkstoffprüfung 2022, Dresden, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 51718
U. Schlattmann and J. Beimdiek, Charakterisierung von Schüttschichtmaterialien für den Einsatz in Filtern für häusliche Holzfeuerungsanlagen (Studienarbeit). Paderborn, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 44302
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science , 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33853 |
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2022 | Report | LibreCat-ID: 52045
C. Scheidemann, T. Hemsel, and W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022.
LibreCat
| Files available
| DOI
2022 | Conference Abstract | LibreCat-ID: 33204
A. J. S. Al-Lami and E. Y. Kenig, “Heat transfer enhancement with internally channeled tubes,” presented at the ProcessNet2022, Würzburg, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 36332 |
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29505
M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31828
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31238
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 29771
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52613
C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101, no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52615
C. Böhne and G. Meschut, “Reduction of flange widths in resistance spot welding by application of eccentric electrode cap geometries,” Welding and Cutting, vol. 3, pp. 208–212, 2022, doi: 10.53192/WAC202203208 .
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32283
T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, and G. Grundmeier, “Untersuchung von Klebverbindungen für Batteriegehäuse,” adhäsion KLEBEN & DICHTEN , vol. 66, pp. 40–43, 2022, doi: https://doi.org/10.1007/s35145-022-0596-9.
LibreCat
| DOI
2022 | Bachelorsthesis | LibreCat-ID: 51666
N. Goncz and S. Ponusamy, Untersuchung der Charakterisierung der Partikelform und deren Einfluss auf die Fließfähigkeit. Paderborn University, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 51662
E. Keksel and S. Ponusamy, Untersuchung eines neuen dynamischen- mechanischen Partikelverrundungsprozesses (Studienarbeit). Paderborn University, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 51664
A. Almohammad and S. Ponusamy, Untersuchung der Polymer-Zerkleinerung in einer Kryo-Prallmühle (Studienarbeit). Paderborn University, 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 52410
A. Schlüter, M. Gonovese, and P. Fragiacomo, “Vorbereiten auf eine nachhaltige Mobilität,” in Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas, A. Schlüter and J. Bernabé-Moreno, Eds. Hanser-Verlag , 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34215
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 52687
P. Bähr, M. Striewe, G. Meschut, and S. Sommer, “Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau,” presented at the 12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 52409
E. Scionti, M. Genovese, C. Pellinger, P. Fragiacomo, and A. Schlüter, “Using More Hydrogen and Green Fuels,” in Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas, A. Schlüter and J. Bernabé-Moreno, Eds. Hanser-Verlag , 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 53080
N. Gaiser et al., “Investigation of the combustion chemistry in laminar, low-pressure oxymethylene ether flames (OME0–4),” Combustion and Flame, vol. 243, Art. no. 112060, 2022, doi: 10.1016/j.combustflame.2022.112060.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53081
J. Zinsmeister et al., “On the diversity of fossil and alternative gasoline combustion chemistry: A comparative flow reactor study,” Combustion and Flame, vol. 243, Art. no. 111961, 2022, doi: 10.1016/j.combustflame.2021.111961.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53084
S. Grimm, S.-J. Baik, P. Hemberger, T. Kasper, A. M. Kempf, and B. Atakan, “Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates,” Journal of Materials Research, vol. 37, no. 9, pp. 1558–1575, 2022, doi: 10.1557/s43578-022-00566-6.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53083
S. Grimm, P. Hemberger, T. Kasper, and B. Atakan, “Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor,” Advanced Materials Interfaces, vol. 9, no. 22, 2022, doi: 10.1002/admi.202200192.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 24760
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, vol. 22. Düren: Shaker Verlag GmbH, 2021.
LibreCat
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, vol. 24. Düren: Shaker Verlag, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 25047 |
B. Křivská et al., “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1178, doi: 10.1088/1757-899x/1178/1/012035.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 25104
J. Göddecke, G. Meschut, J. Damm, M. Albiez, and T. Ummenhofer, “Dämpfungseigenschaften geklebter Verbindungen - Potenzialanalyse und Klebstoffcharakterisierung,” adhäsion KLEBEN & DICHTEN, pp. 14–23, 2021, doi: https://doi.org/10.1007/s35145-021-0520-8.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 25518
D. Stüker and V. Schöppner, “Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25519
D. Stüker and V. Schöppner, “Non-Isothermal Calculation of the Pressure-Throughput-Characteristics of Single Screw Melt-Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25576
E. Moritzer, D. Krassmann, and J. Brikmann, “Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting,” presented at the 74th Annual Assembly of the International Institute of Welding (IIW), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 25577
E. Moritzer, D. Krassmann, and J. Brikmann, “Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten,” Joining Plastics, vol. 15, no. 3–4, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 28017
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, 2021, doi: https://doi.org/10.3390/ma14237190.
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 28104
M. Wende, F. Fischer, and E. Kenig, “Numerical and Experimental Investigation of Zero-Gravity Distillation Units ,” Chemical Engineering Transactions, vol. 88, pp. 697–702, 2021, doi: 10.3303/CET2188116.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 28440 |
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 28443
M. S. Rossel and G. Meschut, “Steigerung der Prognosegüte mechanischer Fügeprozesssimulationen durch den Einsatz einer fügespezifischen Reibmodellierung basierend auf einer experimentellen Parametrisierung,” in 11. Fügetechnisches Gemeinschaftskolloquium, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 28448 |
M. Droß, P. Heyser, G. Meschut, A. Hürkamp, and K. Dröder, “Fiber response to pin penetration in dry woven fabric using numerical analysis,” Journal of Advanced Joining Processes, Art. no. 100083, 2021, doi: 10.1016/j.jajp.2021.100083.
LibreCat
| DOI
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
T. Tröster, F. Pfeifer, B. Nacke, and A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, vol. P1038. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24079
I. Gräßler, A.-S. Koch, H. Thiele, and M. Dattner, “Supporting Innovation Management for SMEs: A Tool for Idea Selection,” presented at the The ISPIM Innovation Conference, Berlin, 2021.
LibreCat
| Download (ext.)
2021 | Newspaper Article | LibreCat-ID: 24095 |
E. Moritzer, F. Hecker, and A. Hirsch, “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen,” Kunststoffland NRW report, vol. 2021, no. 2, pp. 42–43, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24161
E. Moritzer and M. Kröker, “Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen,” CU reports, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24165
E. Moritzer and M. Kröker, “Simulative analysis of the filling process in the 2K GITBlow process on organo sheets,” presented at the SPE Antec 2021, Digital, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24166 |
K. Malena, C. Link, S. Mertin, S. Gausemeier, and A. Trächtler, “Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆,” presented at the 2021 IEEE Transportation Electrification Conference & Expo (ITEC), 2021, doi: 10.1109/itec51675.2021.9490087.
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24168
E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat
2021 | Misc | LibreCat-ID: 24278
S. Ponusamy, Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster. 2021.
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 24283
H. Malatyali, V. Schöppner, N. Rabeneck, F. Hanselle, L. Austermeier, and D. Karch, “A model for the carbon fiber breakage along the twin‐screw extruder,” SPE Polymers, pp. 145–152, 2021, doi: 10.1002/pls2.10040.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24315
H. Malatyali, V. Schöppner, E. Lochbaum, I. Bomm, and F. Hanselle, “The Influence of Process Conditions on the Fiber Length Reduction for Recycled Carbon Fibers,” presented at the The Annual Technical Conference of the Society of Plastics Engineers (ANTEC), , USA, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24316
H. Malatyali, V. Schöppner, S. A. Akar, F. Hanselle, and L. Austermeier, “Reproducibility analysis of fiber length measurements during processing with twin screw extruders,” presented at the The Annual Technical Conference of the Society of Plastics Engineers (ANTEC) , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
K. Gevers, V. Schöppner, and E. Hüllermeier, “Heated tool butt welding of two different materials – Established methods versus artificial intelligence,” presented at the International Institute of Welding, online, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
T. Arndt and V. Schöppner, “Development of scale up rules for quasi-simultaneous laser transmission welding of thermoplastics,” presented at the International institute of welding, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24426
S. Urbanek et al., “Design and Experimental Investigation of an Additively Manufactured PMSM Rotor,” Connecticut, USA, 2021, doi: 10.1109/IEMDC47953.2021.9449566.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24427
S. Magerkohl and J.-P. Brüggemann, “3D-Druck in der industriellen Anwendung - Funktions- und fertigungsgerechte Konstruktion mit additiver Fertigung (Vortrag),” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24441
M. Frank and V. Schöppner, “DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24528
M. Hopp and F. M. Mühlhoff, “Separation of Multi-Component Parts for Mechanical Recycling – An Approach to Produce Hard-Soft Combinations with a Better Recyclability,” 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
E. Moritzer, F. Hecker, and A. Hirsch, “Kleine Tropfen, große Wirkung,” Kunststoffe, no. 9/2021, pp. 88–90, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24589
E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,” Materials & Design, Art. no. 109677, 2021, doi: 10.1016/j.matdes.2021.109677.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 26173
D. Voswinkel, “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, vol. 1190, 2021, doi: 10.1088/1757-899X/1190/1/012028.
LibreCat
| Files available
| DOI
2021 | Conference Paper | LibreCat-ID: 26180
J. Michael et al., “Towards the Concept of a Digital Green Twin for a Sustainable Product Lifecycle,” presented at the 1st International Conference on Water Energy Food and Sustainability (ICoWEFS), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 26191
D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, Art. no. 012028, 2021, doi: 10.1088/1757-899x/1190/1/012028.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 26628
H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw extruders using CFD simulations,” presented at the 36th International conference of the polymer processing society, Montreal , 2021.
LibreCat