Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4009 Publications
2022 | Journal Article | LibreCat-ID: 36332 |
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29505
M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31828
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31238
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 29771
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52613
C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101, no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52615
C. Böhne and G. Meschut, “Reduction of flange widths in resistance spot welding by application of eccentric electrode cap geometries,” Welding and Cutting, vol. 3, pp. 208–212, 2022, doi: 10.53192/WAC202203208 .
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32283
T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, and G. Grundmeier, “Untersuchung von Klebverbindungen für Batteriegehäuse,” adhäsion KLEBEN & DICHTEN , vol. 66, pp. 40–43, 2022, doi: https://doi.org/10.1007/s35145-022-0596-9.
LibreCat
| DOI
2022 | Bachelorsthesis | LibreCat-ID: 51666
N. Goncz and S. Ponusamy, Untersuchung der Charakterisierung der Partikelform und deren Einfluss auf die Fließfähigkeit. Paderborn University, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 51662
E. Keksel and S. Ponusamy, Untersuchung eines neuen dynamischen- mechanischen Partikelverrundungsprozesses (Studienarbeit). Paderborn University, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 51664
A. Almohammad and S. Ponusamy, Untersuchung der Polymer-Zerkleinerung in einer Kryo-Prallmühle (Studienarbeit). Paderborn University, 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 52410
A. Schlüter, M. Gonovese, and P. Fragiacomo, “Vorbereiten auf eine nachhaltige Mobilität,” in Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas, A. Schlüter and J. Bernabé-Moreno, Eds. Hanser-Verlag , 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34215
R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 52687
P. Bähr, M. Striewe, G. Meschut, and S. Sommer, “Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau,” presented at the 12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.
LibreCat
2022 | Book Chapter | LibreCat-ID: 52409
E. Scionti, M. Genovese, C. Pellinger, P. Fragiacomo, and A. Schlüter, “Using More Hydrogen and Green Fuels,” in Sustainable and Smart Energy Systems for Europe´s Cities and Rural Areas, A. Schlüter and J. Bernabé-Moreno, Eds. Hanser-Verlag , 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 53080
N. Gaiser et al., “Investigation of the combustion chemistry in laminar, low-pressure oxymethylene ether flames (OME0–4),” Combustion and Flame, vol. 243, Art. no. 112060, 2022, doi: 10.1016/j.combustflame.2022.112060.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53081
J. Zinsmeister et al., “On the diversity of fossil and alternative gasoline combustion chemistry: A comparative flow reactor study,” Combustion and Flame, vol. 243, Art. no. 111961, 2022, doi: 10.1016/j.combustflame.2021.111961.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53084
S. Grimm, S.-J. Baik, P. Hemberger, T. Kasper, A. M. Kempf, and B. Atakan, “Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates,” Journal of Materials Research, vol. 37, no. 9, pp. 1558–1575, 2022, doi: 10.1557/s43578-022-00566-6.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 53083
S. Grimm, P. Hemberger, T. Kasper, and B. Atakan, “Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor,” Advanced Materials Interfaces, vol. 9, no. 22, 2022, doi: 10.1002/admi.202200192.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 24760
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, vol. 22. Düren: Shaker Verlag GmbH, 2021.
LibreCat
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, vol. 24. Düren: Shaker Verlag, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 25047 |
B. Křivská et al., “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1178, doi: 10.1088/1757-899x/1178/1/012035.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 25104
J. Göddecke, G. Meschut, J. Damm, M. Albiez, and T. Ummenhofer, “Dämpfungseigenschaften geklebter Verbindungen - Potenzialanalyse und Klebstoffcharakterisierung,” adhäsion KLEBEN & DICHTEN, pp. 14–23, 2021, doi: https://doi.org/10.1007/s35145-021-0520-8.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 25518
D. Stüker and V. Schöppner, “Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25519
D. Stüker and V. Schöppner, “Non-Isothermal Calculation of the Pressure-Throughput-Characteristics of Single Screw Melt-Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 25576
E. Moritzer, D. Krassmann, and J. Brikmann, “Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting,” presented at the 74th Annual Assembly of the International Institute of Welding (IIW), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 25577
E. Moritzer, D. Krassmann, and J. Brikmann, “Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten,” Joining Plastics, vol. 15, no. 3–4, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 28017
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, 2021, doi: https://doi.org/10.3390/ma14237190.
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 28104
M. Wende, F. Fischer, and E. Kenig, “Numerical and Experimental Investigation of Zero-Gravity Distillation Units ,” Chemical Engineering Transactions, vol. 88, pp. 697–702, 2021, doi: 10.3303/CET2188116.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 28440 |
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 28443
M. S. Rossel and G. Meschut, “Steigerung der Prognosegüte mechanischer Fügeprozesssimulationen durch den Einsatz einer fügespezifischen Reibmodellierung basierend auf einer experimentellen Parametrisierung,” in 11. Fügetechnisches Gemeinschaftskolloquium, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 28448 |
M. Droß, P. Heyser, G. Meschut, A. Hürkamp, and K. Dröder, “Fiber response to pin penetration in dry woven fabric using numerical analysis,” Journal of Advanced Joining Processes, Art. no. 100083, 2021, doi: 10.1016/j.jajp.2021.100083.
LibreCat
| DOI
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
T. Tröster, F. Pfeifer, B. Nacke, and A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, vol. P1038. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24079
I. Gräßler, A.-S. Koch, H. Thiele, and M. Dattner, “Supporting Innovation Management for SMEs: A Tool for Idea Selection,” presented at the The ISPIM Innovation Conference, Berlin, 2021.
LibreCat
| Download (ext.)
2021 | Newspaper Article | LibreCat-ID: 24095 |
E. Moritzer, F. Hecker, and A. Hirsch, “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen,” Kunststoffland NRW report, vol. 2021, no. 2, pp. 42–43, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24161
E. Moritzer and M. Kröker, “Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen,” CU reports, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24165
E. Moritzer and M. Kröker, “Simulative analysis of the filling process in the 2K GITBlow process on organo sheets,” presented at the SPE Antec 2021, Digital, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24166 |
K. Malena, C. Link, S. Mertin, S. Gausemeier, and A. Trächtler, “Validation of an Online State Estimation Concept for Microscopic Traffic Simulations◆,” presented at the 2021 IEEE Transportation Electrification Conference & Expo (ITEC), 2021, doi: 10.1109/itec51675.2021.9490087.
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24168
E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat
2021 | Misc | LibreCat-ID: 24278
S. Ponusamy, Pulverherstellung und Verrundung neuer Polymermaterialien für das selektive Lasersintern (SLS) - Poster. 2021.
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 24283
H. Malatyali, V. Schöppner, N. Rabeneck, F. Hanselle, L. Austermeier, and D. Karch, “A model for the carbon fiber breakage along the twin‐screw extruder,” SPE Polymers, pp. 145–152, 2021, doi: 10.1002/pls2.10040.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24315
H. Malatyali, V. Schöppner, E. Lochbaum, I. Bomm, and F. Hanselle, “The Influence of Process Conditions on the Fiber Length Reduction for Recycled Carbon Fibers,” presented at the The Annual Technical Conference of the Society of Plastics Engineers (ANTEC), , USA, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24316
H. Malatyali, V. Schöppner, S. A. Akar, F. Hanselle, and L. Austermeier, “Reproducibility analysis of fiber length measurements during processing with twin screw extruders,” presented at the The Annual Technical Conference of the Society of Plastics Engineers (ANTEC) , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
K. Gevers, V. Schöppner, and E. Hüllermeier, “Heated tool butt welding of two different materials – Established methods versus artificial intelligence,” presented at the International Institute of Welding, online, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
T. Arndt and V. Schöppner, “Development of scale up rules for quasi-simultaneous laser transmission welding of thermoplastics,” presented at the International institute of welding, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24426
S. Urbanek et al., “Design and Experimental Investigation of an Additively Manufactured PMSM Rotor,” Connecticut, USA, 2021, doi: 10.1109/IEMDC47953.2021.9449566.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24427
S. Magerkohl and J.-P. Brüggemann, “3D-Druck in der industriellen Anwendung - Funktions- und fertigungsgerechte Konstruktion mit additiver Fertigung (Vortrag),” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24441
M. Frank and V. Schöppner, “DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24528
M. Hopp and F. M. Mühlhoff, “Separation of Multi-Component Parts for Mechanical Recycling – An Approach to Produce Hard-Soft Combinations with a Better Recyclability,” 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
E. Moritzer, F. Hecker, and A. Hirsch, “Kleine Tropfen, große Wirkung,” Kunststoffe, no. 9/2021, pp. 88–90, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24589
E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,” Materials & Design, Art. no. 109677, 2021, doi: 10.1016/j.matdes.2021.109677.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 26173
D. Voswinkel, “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, vol. 1190, 2021, doi: 10.1088/1757-899X/1190/1/012028.
LibreCat
| Files available
| DOI
2021 | Conference Paper | LibreCat-ID: 26180
J. Michael et al., “Towards the Concept of a Digital Green Twin for a Sustainable Product Lifecycle,” presented at the 1st International Conference on Water Energy Food and Sustainability (ICoWEFS), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 26191
D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, Art. no. 012028, 2021, doi: 10.1088/1757-899x/1190/1/012028.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 26628
H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw extruders using CFD simulations,” presented at the 36th International conference of the polymer processing society, Montreal , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26629
H. Malatyali, V. Schöppner, and T. Hoemann, “Investigation of the influence of process and screw configurations on fiber length distribution for recycled carbon fiber,” presented at the 36th International conference of the polymer processing society, Montreal, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26630
M. Altepeter, V. Schöppner, and S. Wanke, “Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” 2021.
LibreCat
2021 | Book | LibreCat-ID: 26649
D. Han and G. Meschut, Mechanisches Fügen von FKV-FKV-Verbindungen. 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 26900
A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, vol. 23. 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 28989 |
M. Bothe, N. Lutters, and E. Kenig, “Examination of hazardous situations in industrial closed-loop processes using dynamic simulations,” Chemical Engineering Transactions, 2021, doi: 10.3303/CET2188117.
LibreCat
| Files available
| DOI
2021 | Book Chapter | LibreCat-ID: 26995
I. Gräßler, C. Oleff, and P. Scholle, “Strategisch-technische Anforderungsanalyse,” in Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, 1st ed., R. Koch, I. Gräßler, D. Zimmer, and T. Tröster, Eds. Düren: Shaker, 2021, pp. 31–49.
LibreCat
2021 | Book (Editor) | LibreCat-ID: 26996
R. Koch, I. Gräßler, D. Zimmer, and T. Tröster, Eds., Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix, vol. 25. Düren: Shaker Verlag, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26997
M. Ehlert et al., “Connecting Energy Storages from Tool Independent, Signal-flow Oriented FMUs,” in Proceedings of the International Conference on SMACD and 16th Conference on PRIME, 2021, pp. 164–167.
LibreCat
2021 | Book Chapter | LibreCat-ID: 27089
C. Koldewey, J. Gausemeier, R. Dumitrescu, H. H. Evers, M. Frank, and J. Reinhold, “Development Process for Smart Service Strategies: Grasping the Potentials of Digitalization for Servitization,” in Digitalization, D. R. Schallmo and J. Tidd, Eds. Springer, 2021, pp. 205–237.
LibreCat
| Download (ext.)
2021 | Book Chapter | LibreCat-ID: 27090
C. Pierenkemper and J. Gausemeier, “Developing Strategies for Digital Transformation in SMEs with Maturity Models,” in Digitalization, D. R. Schallmo and J. Tidd, Eds. Springer, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 27123
V. I. Poddubnyi, A. Trächtler, A. Warkentin, and C. Henke, “Model of a Triangular Caterpillar Drive and Analysis of Vertical Vehicle Dynamics,” Russian Engineering Research, vol. 41, no. 3, pp. 198–201, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 27199
V. Aßmuth and G. Meschut, “Effect of low-profile additives on the durability of adhesively bonded Sheet Moulding Compound (SMC),” International Journal of Adhesion and Adhesives, vol. 112, Art. no. 103036, 2021, doi: 10.1016/j.ijadhadh.2021.103036.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 27211
M. Wende, F. Fischer, and E. Kenig, “Numerical and Experimental Investigation of Zero-Gravity Distillation Units,” presented at the 24th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES‘21) , Brno, Tschechische Republik, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 27366
E. Moritzer and F. Hecker, “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen,” Jahresmagazin Kunststofftechnik, pp. 70–75, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 27490
T. Schmolke and G. Meschut, “Konzeptentwicklung für ein Stahlbatteriegehäuse,” stahl., vol. 3-4 / 2021, pp. 37–39, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 27528
T. Künneke and D. Zimmer, “Konstruktionsregeln für additiv gefertigte Partikeldämpfer/Design rules for additive manufactured particle dampers,” Konstruktion, pp. 72–78, 2021, doi: 10.37544/0720-5953-2021-11-12-72.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 27652
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten ,” in VDI-Berichte 2391, Würzburg, 2021, pp. 197–210.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 27702
M. Helbig et al., “Modeling of adhesives in crash simulation under consideration of manufacturing processes,” presented at the automotive CAE Grand Challange, Hanau, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 27703
M. Helbig et al., “DigiBody - Optimizing of Joining Technology,” presented at the 13th European LS-DYNA Conference, Ulm, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21125
M. Kismann, D. T. Riedl, and P. D. J. K. Lindner, “Ordered arrays of Si nanopillars with alternating diameters fabricated by nanosphere lithography and metal-assisted chemical etching,” Materials Science in Semiconductor Processing, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21280
L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, and G. Meschut, “Simulationsbasierte Lebensdauerabschätzung einer stanzgenieteten Fügeverbindung unter zyklischer Belastung,” presented at the 4. Symposium Materialtechnik, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21340
M. Wende and E. Kenig, “Konzeption und Inbetriebnahme eines Versuchsstandes zur Gravidestillation,” in Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung, Online-Konferenz, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21376
M. Grabo and E. Kenig, “Modellierung eines Latentwärmespeichersystems in Form einer ungeordneten Schüttung makro-verkapselter PCM-Elemente,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung, Leipzig, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21431
N. Chudalla, G. Meschut, A. Bartley, and T. M. Wibbeke, “Analyse des Versagensverhaltens geklebter Stahl Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung,” in 21. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21442
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Development of a submodel technique for FFT-based solvers in micromechanical analysis,” presented at the 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online), 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21573
J. Heine, C. Wecker, E. Kenig, and H.-J. Bart, “Stofftransportmessung und -visualisierung am ruhenden und bewegten Einzeltropfen,” 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21574
C. Wecker, A. Schulz, J. Heine, H.-J. Bart, and E. Kenig, “Numerische Untersuchung der Marangonikonvektion in Flüssig-Flüssig-Systemen: Von der Tropfenbildung bis zur Tropfeninteraktion,” 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21575
C. Wecker, A. Hoppe, A. Schulz, J. Heine, H.-J. Bart, and E. Kenig, “Numerische Untersuchungen zu Fluiddynamik und Stofftransport binärer Tropfeninteraktion unter Berücksichtigung von Marangonikonvektion,” 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21576
A. Schulz, C. Wecker, and E. Kenig, “Mehrkomponenten-Stofftransport an bewegten Phasengrenzflächen unter Berücksichtigung von Diffusionskreuzeffekten,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 17744
L. Bolenz, F. Fischer, D. Toye, and E. Kenig, “Determination of local fluid dynamic parameters in structured packings through X-ray tomography: overcoming image resolution restrictions,” Chemical Engineering Science, vol. 229, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 23402
R. Bertling, M. Hack, I. Ausner, B. Horschitz, and E. Kenig, “CFD-basierte Untersuchung von Zweiphasenströmungen in strukturierten Packungen,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23576
P. Biemelt, S. Böhm, S. Gausemeier, and A. Trächtler, “Subjective Evaluation of Filter- and Optimization-Based Motion Cueing Algorithms for a Hybrid Kinematics Driving Simulator,” in Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC), Melbourne, Australia, 2021, pp. 1619–1626.
LibreCat
2021 | Book Chapter | LibreCat-ID: 23734
S. Lammers, A. Kruse, J. Gierse, J. Tominski, and C.-F. Lindemann, “Konstruktionsrichtlinien in der Produktentwicklung,” in Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, R. Koch, D. Zimmer, T. Tröster, and I. Gräßler, Eds. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23760 |
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 23839
C. Marschik, W. Roland, M. Döner, G. Steinbichler, and V. Schöppner, “A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion,” Polymers, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23851
E. Moritzer and F. I. Bürenhaus, “Influence of Processing Parameters on Fiber Length Degradation during Injection Molding,” in SPE ANTEC 2021 Proceedings, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23977
L. Tölle and M. Hopp , “Recycling faserverstärkter Kunststoffe zu Ende gedacht… ,” Kunststoffland NRW Report , 2021.
LibreCat