Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
2811 Publications
2022 | Conference Paper | LibreCat-ID: 33981
Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units
M. Ehlert, C. Henke, A. Trächtler, in: Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, SCITEPRESS - Science and Technology Publications, 2022.
LibreCat
| DOI
M. Ehlert, C. Henke, A. Trächtler, in: Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, SCITEPRESS - Science and Technology Publications, 2022.
2022 | Conference Paper | LibreCat-ID: 30263
Innovative assistance system for setting up a mechatronic straightening machine
L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: 2022.
LibreCat
| DOI
L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: 2022.
2022 | Conference Paper | LibreCat-ID: 30265
An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation
F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, A. Trächtler, in: 2022.
LibreCat
| DOI
F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, A. Trächtler, in: 2022.
2022 | Journal Article | LibreCat-ID: 33982
Tool Wear Monitoring of a Tree Log Bandsaw using a Deep Convolutional Neural Network on challenging data
S. Koppert, C. Henke, A. Trächtler, S. Möhringer, IFAC-PapersOnLine 55 (2022) 554–560.
LibreCat
| DOI
S. Koppert, C. Henke, A. Trächtler, S. Möhringer, IFAC-PapersOnLine 55 (2022) 554–560.
2022 | Conference Paper | LibreCat-ID: 33978
Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten
L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: Fachtagung VDI MECHATRONIK 2022 , Darmstadt, 2022, pp. 19–24.
LibreCat
L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: Fachtagung VDI MECHATRONIK 2022 , Darmstadt, 2022, pp. 19–24.
2022 | Conference Paper | LibreCat-ID: 33469
Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC
S. Schütz, R. Schmidt, C. Henke, A. Trächtler, in: 2022 IEEE International Systems Conference (SysCon), IEEE, 2022, pp. 1–8.
LibreCat
| DOI
S. Schütz, R. Schmidt, C. Henke, A. Trächtler, in: 2022 IEEE International Systems Conference (SysCon), IEEE, 2022, pp. 1–8.
2022 | Conference Paper | LibreCat-ID: 33976
Anomaly Detection in Hot Forming Processes using Hybrid Modeling - Part II
C. Lenz, F. Hanke, C. Henke, A. Trächtler, in: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), IEEE, 2022.
LibreCat
| DOI
C. Lenz, F. Hanke, C. Henke, A. Trächtler, in: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), IEEE, 2022.
2022 | Book Chapter | LibreCat-ID: 34113
Systematic Investigations Concerning Eddy Currents in Additively Manufactured Structures
M. Haase, D. Zimmer, in: Innovative Product Development by Additive Manufacturing 2021, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
M. Haase, D. Zimmer, in: Innovative Product Development by Additive Manufacturing 2021, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 30962
Numerical investigation of a friction test to determine the friction coefficients for the clinching process
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 29951 |
Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).
LibreCat
| DOI
| Download (ext.)
S. Martin, C.R. Bielak, M. Bobbert, T. Tröster, G. Meschut, Production Engineering (2022).
2022 | Journal Article | LibreCat-ID: 32813 |
Influence of the Surrounding Sheet Geometry on a Clinched Joint
S. Martin, K. Kurtusic, T. Tröster, Key Engineering Materials 927 (2022).
LibreCat
| DOI
| Download (ext.)
S. Martin, K. Kurtusic, T. Tröster, Key Engineering Materials 927 (2022).
2022 | Journal Article | LibreCat-ID: 34000
Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming
J. Rozo Vasquez, H. Kanagarajah, B. Arian, L. Kersting, W. Homberg, A. Trächtler, F. Walther, Practical Metallography 59 (2022) 660–675.
LibreCat
| DOI
J. Rozo Vasquez, H. Kanagarajah, B. Arian, L. Kersting, W. Homberg, A. Trächtler, F. Walther, Practical Metallography 59 (2022) 660–675.
2022 | Journal Article | LibreCat-ID: 33999
Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes
L. Kersting, B. Arian, J.R. Vasquez, A. Trächtler, W. Homberg, F. Walther, Key Engineering Materials 926 (2022) 862–874.
LibreCat
| DOI
L. Kersting, B. Arian, J.R. Vasquez, A. Trächtler, W. Homberg, F. Walther, Key Engineering Materials 926 (2022) 862–874.
2022 | Conference Paper | LibreCat-ID: 36563
Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel.
J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, A. Trächtler, in: Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.
LibreCat
J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, A. Trächtler, in: Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.
2022 | Book | LibreCat-ID: 36412
Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Herstellung gradierter Bauteile.
L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, F. Walther, Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile., Diedrich, Magdeburg, 2022.
LibreCat
L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, F. Walther, Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile., Diedrich, Magdeburg, 2022.
2022 | Journal Article | LibreCat-ID: 30228
Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.
LibreCat
| DOI
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.
2022 | Conference Paper | LibreCat-ID: 33356 |
Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
LibreCat
| Download (ext.)
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
2022 | Conference Paper | LibreCat-ID: 44838
Einsatz und Evaluation von Virtual Reality-Technologie in einem Informatik-Seminar
E. Yigitbas, in: die hochschullehre Jahrgang 8/2022, 2022.
LibreCat
E. Yigitbas, in: die hochschullehre Jahrgang 8/2022, 2022.
2022 | Journal Article | LibreCat-ID: 30921
Driven Gaussian quantum walks
P. Held, M. Engelkemeier, S. De, S. Barkhofen, J. Sperling, C. Silberhorn, Physical Review A 105 (2022).
LibreCat
| DOI
P. Held, M. Engelkemeier, S. De, S. Barkhofen, J. Sperling, C. Silberhorn, Physical Review A 105 (2022).
2022 | Conference Abstract | LibreCat-ID: 46289 |
Folgen wiederholter Negation auf die Aufmerksamkeit
N.C. Banh, I. Scharlau, K.J. Rohlfing, in: C. Bermeitinger, W. Greve (Eds.), 52. Kongress Der Deutschen Gesellschaft Für Psychologie, 2022.
LibreCat
| Download (ext.)
N.C. Banh, I. Scharlau, K.J. Rohlfing, in: C. Bermeitinger, W. Greve (Eds.), 52. Kongress Der Deutschen Gesellschaft Für Psychologie, 2022.
2022 | Conference Abstract | LibreCat-ID: 46285
Gesundes Misstrauen gegenüber Erklärungen
T.M. Peters, I. Scharlau, in: C. Bermeitinger, W. Greve (Eds.), 52. Kongress Der Deutschen Gesellschaft Für Psychologie, Pabst Science Publisher, 2022.
LibreCat
| Download (ext.)
T.M. Peters, I. Scharlau, in: C. Bermeitinger, W. Greve (Eds.), 52. Kongress Der Deutschen Gesellschaft Für Psychologie, Pabst Science Publisher, 2022.
2022 | Conference Abstract | LibreCat-ID: 31871
Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag)
I. Kletetzka, S.H. Klippstein, in: 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben , Universität Paderborn, 2022.
LibreCat
I. Kletetzka, S.H. Klippstein, in: 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben , Universität Paderborn, 2022.
2022 | Mastersthesis | LibreCat-ID: 43011
Untersuchung und Modellierung der Materialeigenschaften von glaskugelgefüllten, im Lasersinterprozess verarbeiteten Dry-Blends
F.P. Hanselle, Untersuchung Und Modellierung Der Materialeigenschaften von Glaskugelgefüllten, Im Lasersinterprozess Verarbeiteten Dry-Blends, 2022.
LibreCat
F.P. Hanselle, Untersuchung Und Modellierung Der Materialeigenschaften von Glaskugelgefüllten, Im Lasersinterprozess Verarbeiteten Dry-Blends, 2022.
2022 | Mastersthesis | LibreCat-ID: 43010
Oberflächenmodifikation von Glaskugeln zur Verbesserung der Adhäsion im Lasersinterverfahren
M. Kosanke, Oberflächenmodifikation von Glaskugeln Zur Verbesserung Der Adhäsion Im Lasersinterverfahren, Paderborn, 2022.
LibreCat
M. Kosanke, Oberflächenmodifikation von Glaskugeln Zur Verbesserung Der Adhäsion Im Lasersinterverfahren, Paderborn, 2022.
2022 | Mastersthesis | LibreCat-ID: 43007
Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit)
F. Henke, Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit), Paderborn, 2022.
LibreCat
F. Henke, Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit), Paderborn, 2022.
2022 | Mastersthesis | LibreCat-ID: 46858
Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver, 2022.
LibreCat
J. Ostermeier, Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver, 2022.
2022 | Bachelorsthesis | LibreCat-ID: 43012
Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft, Paderborn, 2022.
LibreCat
I. Sural, Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft, Paderborn, 2022.
2022 | Book | LibreCat-ID: 47417
Regelungstechnik. Einführung in die Methoden und ihre Anwendung
O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, A. Trächtler, Regelungstechnik. Einführung in die Methoden und ihre Anwendung, 13th ed., VDE-Verlag, Berlin, 2022.
LibreCat
O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, A. Trächtler, Regelungstechnik. Einführung in die Methoden und ihre Anwendung, 13th ed., VDE-Verlag, Berlin, 2022.
2022 | Conference Paper | LibreCat-ID: 33696 |
Technically enabled explaining of voice characteristics
J. Wiechmann, T. Glarner, F. Rautenberg, P. Wagner, R. Haeb-Umbach, in: 18. Phonetik Und Phonologie Im Deutschsprachigen Raum (P&P), 2022.
LibreCat
| Files available
J. Wiechmann, T. Glarner, F. Rautenberg, P. Wagner, R. Haeb-Umbach, in: 18. Phonetik Und Phonologie Im Deutschsprachigen Raum (P&P), 2022.
2022 | Book Review | LibreCat-ID: 35901 |
Lydia Böttger (Universität Paderborn) rezensiert: Michalak, Magdalena; Döll, Marion (Hrsg.) (2021): Lehrwerke und Lehrmaterialien im Kontext des Deutschen als Zweitsprache und der sprachlichen Bildung. [Deutsch als Zweitsprache Positionen, Perspektiven, Potenziale, Bd. 2]. Münster, New York: Waxmann, 164 Seiten. ISBN 978-3-8309-4105-7.
L. Böttger, www.daz-portal.de (2022).
LibreCat
| Download (ext.)
L. Böttger, www.daz-portal.de (2022).
2022 | Conference Paper | LibreCat-ID: 33509
Far-field Calculation from magnetic Huygens Box Data using the Boundary Element Method
C. Marschalt, D. Schroder, S. Lange, U. Hilleringmann, C. Hedayat, H. Kuhn, D. Sievers, J. Förstner, in: 2022 Smart Systems Integration (SSI), IEEE, Grenoble, France, 2022.
LibreCat
| DOI
| Download (ext.)
C. Marschalt, D. Schroder, S. Lange, U. Hilleringmann, C. Hedayat, H. Kuhn, D. Sievers, J. Förstner, in: 2022 Smart Systems Integration (SSI), IEEE, Grenoble, France, 2022.
2022 | Conference Paper | LibreCat-ID: 30883
Design and Evaluation of AR-Assisted End-User Robot Path Planning Strategies
S.C. Krings, E. Yigitbas, K. Biermeier, G. Engels, in: Proceedings of the 14th ACM SIGCHI Symposium on Engineering Interactive Computing Systems (EICS 2022), 2022.
LibreCat
S.C. Krings, E. Yigitbas, K. Biermeier, G. Engels, in: Proceedings of the 14th ACM SIGCHI Symposium on Engineering Interactive Computing Systems (EICS 2022), 2022.
2022 | Conference Paper | LibreCat-ID: 34001 |
Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen
B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, in: 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, Aachen, 2022, pp. 333–347.
LibreCat
| Download (ext.)
B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, in: 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, Aachen, 2022, pp. 333–347.
2022 | Conference Paper | LibreCat-ID: 34003 |
A flow forming process model to predict workpiece properties in AISI 304L
B. Arian, A. Oesterwinter, W. Homberg, J. Rozo Vasquez, F. Walther, L. Kersting, A. Trächtler, in: 19th Int. Conference on Metal Forming 2022, 2022.
LibreCat
| Download (ext.)
B. Arian, A. Oesterwinter, W. Homberg, J. Rozo Vasquez, F. Walther, L. Kersting, A. Trächtler, in: 19th Int. Conference on Metal Forming 2022, 2022.
2022 | Conference Paper | LibreCat-ID: 33852 |
VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 2011–2018.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 2011–2018.
2022 | Conference Paper | LibreCat-ID: 30220 |
Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
2022 | Conference Paper | LibreCat-ID: 32874 |
Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
2022 | Conference Paper | LibreCat-ID: 50744 |
Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, C. Haefner, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
LibreCat
| Files available
| Download (ext.)
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, C. Haefner, in: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
2022 | Conference Paper | LibreCat-ID: 33853 |
INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
LibreCat
| DOI
| Download (ext.)
E. Moritzer, F. Hecker, in: D.L. Bourell, J.J. Beaman, R.H. Crawford, D. Kovar, C.C. Seepersad, M. Tehrani (Eds.), Proceedings of the 33rd Annual Freeform Fabrication Symposium, 2022, pp. 1844–1858.
2022 | Journal Article | LibreCat-ID: 51348
What is Missing in XAI So Far?
U. Schmid, B. Wrede, KI - Künstliche Intelligenz 36 (2022) 303–315.
LibreCat
| DOI
U. Schmid, B. Wrede, KI - Künstliche Intelligenz 36 (2022) 303–315.
2022 | Journal Article | LibreCat-ID: 51366
Explainable AI
U. Schmid, B. Wrede, KI - Künstliche Intelligenz 36 (2022) 207–210.
LibreCat
| DOI
U. Schmid, B. Wrede, KI - Künstliche Intelligenz 36 (2022) 207–210.
2022 | Journal Article | LibreCat-ID: 51365
AI: Back to the Roots?
B. Wrede, KI - Künstliche Intelligenz 36 (2022) 117–120.
LibreCat
| DOI
B. Wrede, KI - Künstliche Intelligenz 36 (2022) 117–120.
2022 | Journal Article | LibreCat-ID: 51349
Exploring Monological and Dialogical Phases in Naturally Occurring Explanations
J.B. Fisher, V. Lohmer, F. Kern, W. Barthlen, S. Gaus, K. Rohlfing, KI - Künstliche Intelligenz 36 (2022) 317–326.
LibreCat
| DOI
J.B. Fisher, V. Lohmer, F. Kern, W. Barthlen, S. Gaus, K. Rohlfing, KI - Künstliche Intelligenz 36 (2022) 317–326.
2022 | Journal Article | LibreCat-ID: 51344
Which “motionese” parameters change with children's age? Disentangling attention-getting from action-structuring modifications
K. Rohlfing, A.-L. Vollmer, J. Fritsch, B. Wrede, Frontiers in Communication 7 (2022).
LibreCat
| DOI
K. Rohlfing, A.-L. Vollmer, J. Fritsch, B. Wrede, Frontiers in Communication 7 (2022).
2022 | Conference Paper | LibreCat-ID: 51343
Formalizing cognitive biases in medical diagnostic reasoning
D. Battefeld, S. Kopp, in: Presented at the 8th Workshop on Formal and Cognitive Reasoning (FCR), Trier., 2022.
LibreCat
D. Battefeld, S. Kopp, in: Presented at the 8th Workshop on Formal and Cognitive Reasoning (FCR), Trier., 2022.
2022 | Conference Paper | LibreCat-ID: 51346
An Architecture Supporting Configurable Autonomous Multimodal Joint-Attention-Therapy for Various Robotic Systems
A. Groß, C. Schütze, B. Wrede, B. Richter, in: INTERNATIONAL CONFERENCE ON MULTIMODAL INTERACTION, ACM, 2022, pp. 154–159.
LibreCat
| DOI
A. Groß, C. Schütze, B. Wrede, B. Richter, in: INTERNATIONAL CONFERENCE ON MULTIMODAL INTERACTION, ACM, 2022, pp. 154–159.
2022 | Conference Paper | LibreCat-ID: 51347
Enabling Non-Technical Domain Experts to Create Robot-Assisted Therapeutic Scenarios via Visual Programming
C. Schütze, A. Groß, B. Wrede, B. Richter, in: INTERNATIONAL CONFERENCE ON MULTIMODAL INTERACTION, ACM, 2022, pp. 166–170.
LibreCat
| DOI
C. Schütze, A. Groß, B. Wrede, B. Richter, in: INTERNATIONAL CONFERENCE ON MULTIMODAL INTERACTION, ACM, 2022, pp. 166–170.
2022 | Conference Paper | LibreCat-ID: 46582
METAdata and metaDATA
D. Ried, C. Gubsch, in: S. Münnich, D. Rizo (Eds.), 2022.
LibreCat
| DOI
D. Ried, C. Gubsch, in: S. Münnich, D. Rizo (Eds.), 2022.
2022 | Journal Article | LibreCat-ID: 48780
Agnostic Explanation of Model Change based on Feature Importance
M. Muschalik, F. Fumagalli, B. Hammer, E. Huellermeier, KI - Künstliche Intelligenz 36 (2022) 211–224.
LibreCat
| DOI
M. Muschalik, F. Fumagalli, B. Hammer, E. Huellermeier, KI - Künstliche Intelligenz 36 (2022) 211–224.
2022 | Journal Article | LibreCat-ID: 29724
Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
LibreCat
| DOI
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).
2022 | Journal Article | LibreCat-ID: 29505
Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).
LibreCat
| DOI
M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).
2022 | Book Chapter | LibreCat-ID: 29771
Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper, in: Light Metals 2022, Springer International Publishing, Cham, 2022.
LibreCat
| DOI
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper, in: Light Metals 2022, Springer International Publishing, Cham, 2022.
2022 | Journal Article | LibreCat-ID: 34215
Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
2022 | Journal Article | LibreCat-ID: 44088 |
A density-functional theory study of hole and defect-bound exciton polarons in lithium niobate
F. Schmidt, A.L. Kozub, U. Gerstmann, W.G. Schmidt, A. Schindlmayr, Crystals 12 (2022).
LibreCat
| Files available
| DOI
| WoS
F. Schmidt, A.L. Kozub, U. Gerstmann, W.G. Schmidt, A. Schindlmayr, Crystals 12 (2022).
2021 | Dissertation | LibreCat-ID: 24760
Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, Shaker Verlag GmbH, Düren, 2021.
LibreCat
| Download (ext.)
P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile, Shaker Verlag GmbH, Düren, 2021.
2021 | Dissertation | LibreCat-ID: 24770
Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, Shaker Verlag, Düren, 2021.
LibreCat
| Download (ext.)
C. Schumacher, Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6, Shaker Verlag, Düren, 2021.
2021 | Journal Article | LibreCat-ID: 25272
Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, W. Bremser, ChemElectroChem (2021) 2155–2168.
LibreCat
| DOI
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, W. Bremser, ChemElectroChem (2021) 2155–2168.
2021 | Conference Paper | LibreCat-ID: 25576
Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting
E. Moritzer, D. Krassmann, J. Brikmann, in: 2021.
LibreCat
E. Moritzer, D. Krassmann, J. Brikmann, in: 2021.
2021 | Journal Article | LibreCat-ID: 25577
Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten
E. Moritzer, D. Krassmann, J. Brikmann, Joining Plastics 15 (2021).
LibreCat
E. Moritzer, D. Krassmann, J. Brikmann, Joining Plastics 15 (2021).
2021 | Journal Article | LibreCat-ID: 25605 |
Influence of Plasmon Resonances and Symmetry Effects on Second Harmonic Generation in WS2–Plasmonic Hybrid Metasurfaces
F. Spreyer, C. Ruppert, P. Georgi, T. Zentgraf, ACS Nano 15 (2021) 16719–16728.
LibreCat
| DOI
| Download (ext.)
F. Spreyer, C. Ruppert, P. Georgi, T. Zentgraf, ACS Nano 15 (2021) 16719–16728.
2021 | Conference Paper | LibreCat-ID: 20244 |
Extending Business Model Development Tools with Consolidated Expert Knowledge
S. Gottschalk, J. Kirchhoff, G. Engels, in: B. Shishkov (Ed.), Business Modeling and Software Design, 2021.
LibreCat
| Files available
| DOI
S. Gottschalk, J. Kirchhoff, G. Engels, in: B. Shishkov (Ed.), Business Modeling and Software Design, 2021.
2021 | Journal Article | LibreCat-ID: 28017
Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, M. Schaper, Materials (2021).
LibreCat
| Files available
| DOI
| Download (ext.)
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, M. Schaper, Materials (2021).
2021 | Journal Article | LibreCat-ID: 28099 |
The Strong Scaling Advantage of FPGAs in HPC for N-body Simulations
J. Menzel, C. Plessl, T. Kenter, ACM Transactions on Reconfigurable Technology and Systems 15 (2021) 1–30.
LibreCat
| DOI
| Download (ext.)
J. Menzel, C. Plessl, T. Kenter, ACM Transactions on Reconfigurable Technology and Systems 15 (2021) 1–30.
2021 | Dissertation | LibreCat-ID: 28371
Systematik zum Einstieg in die Plattformökonomie
M. Drewel, Systematik zum Einstieg in die Plattformökonomie, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
LibreCat
M. Drewel, Systematik zum Einstieg in die Plattformökonomie, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
2021 | Dissertation | LibreCat-ID: 28372
Systematik zur Planung des organisationalen Wandels zum Smart Service-Anbieter
M. Frank, Systematik zur Planung des organisationalen Wandels zum Smart Service-Anbieter, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
LibreCat
M. Frank, Systematik zur Planung des organisationalen Wandels zum Smart Service-Anbieter, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
2021 | Dissertation | LibreCat-ID: 28374
Rahmenwerk zur Planung und Einführung von Systems Engineering und Model-Based Systems Engineering
L. Bretz, Rahmenwerk zur Planung und Einführung von Systems Engineering und Model-Based Systems Engineering, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
LibreCat
L. Bretz, Rahmenwerk zur Planung und Einführung von Systems Engineering und Model-Based Systems Engineering, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
2021 | Conference Paper | LibreCat-ID: 28440 |
Forming Simulation of Tailored Press Hardened Parts
M. Triebus, A. Reitz, O. Grydin, J. Grenz, A. Schneidt, R. Erhardt, T. Tröster, M. Schaper, in: 13th European LS-DYNA Conference 2021, 2021.
LibreCat
| Download (ext.)
M. Triebus, A. Reitz, O. Grydin, J. Grenz, A. Schneidt, R. Erhardt, T. Tröster, M. Schaper, in: 13th European LS-DYNA Conference 2021, 2021.
2021 | Book | LibreCat-ID: 28461
Großserientaugliche induktive Platinenerwärmung für den Warmformprozess
T. Tröster, F. Pfeifer, B. Nacke, A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, Forschungsvereinigung Stahlanwendung e.V., Düsseldorf, 2021.
LibreCat
T. Tröster, F. Pfeifer, B. Nacke, A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, Forschungsvereinigung Stahlanwendung e.V., Düsseldorf, 2021.
2021 | Newspaper Article | LibreCat-ID: 24095 |
Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffland NRW report 2021 (2021) 42–43.
LibreCat
| Download (ext.)
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffland NRW report 2021 (2021) 42–43.
2021 | Journal Article | LibreCat-ID: 24161
Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen
E. Moritzer, M. Kröker, CU reports (2021).
LibreCat
E. Moritzer, M. Kröker, CU reports (2021).
2021 | Conference Paper | LibreCat-ID: 24165
Simulative analysis of the filling process in the 2K GITBlow process on organo sheets
E. Moritzer, M. Kröker, in: 2021.
LibreCat
E. Moritzer, M. Kröker, in: 2021.
2021 | Journal Article | LibreCat-ID: 24168
Einfluss eines beheizten Bauraums auf die Schweißnahtqualität
E. Moritzer, J. Wächter, Plastverarbeiter (2021) 30–32.
LibreCat
E. Moritzer, J. Wächter, Plastverarbeiter (2021) 30–32.
2021 | Journal Article | LibreCat-ID: 24283
A model for the carbon fiber breakage along the twin‐screw extruder
H. Malatyali, V. Schöppner, N. Rabeneck, F. Hanselle, L. Austermeier, D. Karch, SPE Polymers (2021) 145–152.
LibreCat
| DOI
H. Malatyali, V. Schöppner, N. Rabeneck, F. Hanselle, L. Austermeier, D. Karch, SPE Polymers (2021) 145–152.
2021 | Conference Paper | LibreCat-ID: 24315
The Influence of Process Conditions on the Fiber Length Reduction for Recycled Carbon Fibers
H. Malatyali, V. Schöppner, E. Lochbaum, I. Bomm, F. Hanselle, in: SPE ANTEC, 2021.
LibreCat
H. Malatyali, V. Schöppner, E. Lochbaum, I. Bomm, F. Hanselle, in: SPE ANTEC, 2021.
2021 | Conference Paper | LibreCat-ID: 24316
Reproducibility analysis of fiber length measurements during processing with twin screw extruders
H. Malatyali, V. Schöppner, S.A. Akar, F. Hanselle, L. Austermeier, in: SPE ANTEC, 2021.
LibreCat
H. Malatyali, V. Schöppner, S.A. Akar, F. Hanselle, L. Austermeier, in: SPE ANTEC, 2021.
2021 | Newspaper Article | LibreCat-ID: 24372
Lebensdauer vorhersagen?
K. Gevers, V. Schöppner, K-Zeitung (n.d.).
LibreCat
K. Gevers, V. Schöppner, K-Zeitung (n.d.).
2021 | Conference Paper | LibreCat-ID: 24382
Heated tool butt welding of two different materials – Established methods versus artificial intelligence
K. Gevers, V. Schöppner, E. Hüllermeier, in: 2021.
LibreCat
K. Gevers, V. Schöppner, E. Hüllermeier, in: 2021.
2021 | Conference Paper | LibreCat-ID: 24389
Development of scale up rules for quasi-simultaneous laser transmission welding of thermoplastics
T. Arndt, V. Schöppner, in: 2021.
LibreCat
T. Arndt, V. Schöppner, in: 2021.
2021 | Conference Paper | LibreCat-ID: 24528
Separation of Multi-Component Parts for Mechanical Recycling – An Approach to Produce Hard-Soft Combinations with a Better Recyclability
M. Hopp, F.M. Mühlhoff, in: 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), USA, 2021.
LibreCat
M. Hopp, F.M. Mühlhoff, in: 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), USA, 2021.
2021 | Newspaper Article | LibreCat-ID: 24556
Kleine Tropfen, große Wirkung
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffe (2021) 88–90.
LibreCat
E. Moritzer, F. Hecker, A. Hirsch, Kunststoffe (2021) 88–90.
2021 | Journal Article | LibreCat-ID: 24589
Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry
E. Zhuravlev, B. Milkereit, B. Yang, S. Heiland, P. Vieth, M. Voigt, M. Schaper, G. Grundmeier, C. Schick, O. Kessler, Materials & Design (2021).
LibreCat
| DOI
E. Zhuravlev, B. Milkereit, B. Yang, S. Heiland, P. Vieth, M. Voigt, M. Schaper, G. Grundmeier, C. Schick, O. Kessler, Materials & Design (2021).
2021 | Conference Paper | LibreCat-ID: 26180
Towards the Concept of a Digital Green Twin for a Sustainable Product Lifecycle
J. Michael, E.-M. Grote, S. Pfeifer, R. Rasor, C. Henke, A. Trächtler, L. Kaiser, in: 2021.
LibreCat
J. Michael, E.-M. Grote, S. Pfeifer, R. Rasor, C. Henke, A. Trächtler, L. Kaiser, in: 2021.
2021 | Conference Paper | LibreCat-ID: 26628
Investigation of shear rates in twin-screw extruders using CFD simulations
H. Malatyali, V. Schöppner, in: 36th PPS, 2021.
LibreCat
H. Malatyali, V. Schöppner, in: 36th PPS, 2021.
2021 | Conference Paper | LibreCat-ID: 26629
Investigation of the influence of process and screw configurations on fiber length distribution for recycled carbon fiber
H. Malatyali, V. Schöppner, T. Hoemann, in: 36th PPS, 2021.
LibreCat
H. Malatyali, V. Schöppner, T. Hoemann, in: 36th PPS, 2021.
2021 | Conference Paper | LibreCat-ID: 26630
Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder
M. Altepeter, V. Schöppner, S. Wanke, in: 2021.
LibreCat
M. Altepeter, V. Schöppner, S. Wanke, in: 2021.
2021 | Dissertation | LibreCat-ID: 26900
Mikrostrukturausprägung additiv gefertigter Gitterstrukturen
A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, 2021.
LibreCat
A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, 2021.
2021 | Book (Editor) | LibreCat-ID: 26996
Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix
R. Koch, I. Gräßler, D. Zimmer, T. Tröster, eds., Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix, Shaker Verlag, Düren, 2021.
LibreCat
R. Koch, I. Gräßler, D. Zimmer, T. Tröster, eds., Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix, Shaker Verlag, Düren, 2021.
2021 | Conference Paper | LibreCat-ID: 26997
Connecting Energy Storages from Tool Independent, Signal-flow Oriented FMUs
M. Ehlert, J. Michael, C. Henke, A. Trächtler, M. Kalla, B. Bagaber, B. Ponick, A. Mertens, in: Proceedings of the International Conference on SMACD and 16th Conference on PRIME, 2021, pp. 164–167.
LibreCat
M. Ehlert, J. Michael, C. Henke, A. Trächtler, M. Kalla, B. Bagaber, B. Ponick, A. Mertens, in: Proceedings of the International Conference on SMACD and 16th Conference on PRIME, 2021, pp. 164–167.
2021 | Conference Paper | LibreCat-ID: 27087
Integration of agile practices in the product development process of intelligent technical systems
S. Gabriel, N. Niewöhner, L. Asmar, A. Kühn, R. Dumitrescu, in: Procedia CIRP, Elsevier, 2021, pp. 427–432.
LibreCat
S. Gabriel, N. Niewöhner, L. Asmar, A. Kühn, R. Dumitrescu, in: Procedia CIRP, Elsevier, 2021, pp. 427–432.
2021 | Conference Paper | LibreCat-ID: 27094
Iterative and Scenario-Based Requirements Specification in a System of Systems Context
C. Wiecher, J. Greenyer, C. Wolff, H. Anacker, R. Dumitrescu, in: F. Dalpiaz, P. Spoletini (Eds.), Requirements Engineering: Foundation for Software Quality, REFSQ 2021, Springer Nature Switzerland AG, Cham, Switzerland, 2021.
LibreCat
C. Wiecher, J. Greenyer, C. Wolff, H. Anacker, R. Dumitrescu, in: F. Dalpiaz, P. Spoletini (Eds.), Requirements Engineering: Foundation for Software Quality, REFSQ 2021, Springer Nature Switzerland AG, Cham, Switzerland, 2021.
2021 | Journal Article | LibreCat-ID: 27123
Model of a Triangular Caterpillar Drive and Analysis of Vertical Vehicle Dynamics
V.I. Poddubnyi, A. Trächtler, A. Warkentin, C. Henke, Russian Engineering Research 41 (2021) 198–201.
LibreCat
V.I. Poddubnyi, A. Trächtler, A. Warkentin, C. Henke, Russian Engineering Research 41 (2021) 198–201.
2021 | Conference Paper | LibreCat-ID: 27365
Towards Performance Characterization of FPGAs in Context of HPC using OpenCL Benchmarks
M. Meyer, in: Proceedings of the 11th International Symposium on Highly Efficient Accelerators and Reconfigurable Technologies, 2021.
LibreCat
| DOI
M. Meyer, in: Proceedings of the 11th International Symposium on Highly Efficient Accelerators and Reconfigurable Technologies, 2021.
2021 | Newspaper Article | LibreCat-ID: 27366
Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen
E. Moritzer, F. Hecker, Jahresmagazin Kunststofftechnik (2021) 70–75.
LibreCat
| Download (ext.)
E. Moritzer, F. Hecker, Jahresmagazin Kunststofftechnik (2021) 70–75.
2021 | Conference Paper | LibreCat-ID: 27418
eMoflon: : Neo - Consistency and Model Management with Graph Databases
N. Weidmann, A. Anjorin, in: L. Iovino, L. Michael Kristensen (Eds.), {STAF} 2021 Workshop Proceedings: 9th International Workshop on Bidirectional Transformations, Joint Workshop on Foundations and Practice of Visual Modeling and Data for Model-Driven Engineering, International Workshop on {MDE} for Smart IoT Systems, 4th International Workshop on (Meta)Modeling for Healthcare Systems, and 20th International Workshop on {OCL} and Textual Modeling Co-Located with Software Technologies: Applications and Foundations, Federation of Conferences {(STAF} 2021), Virtual Event / Bergen, Norway, June 21-25, 2021, CEUR-WS.org, 2021, pp. 54–64.
LibreCat
N. Weidmann, A. Anjorin, in: L. Iovino, L. Michael Kristensen (Eds.), {STAF} 2021 Workshop Proceedings: 9th International Workshop on Bidirectional Transformations, Joint Workshop on Foundations and Practice of Visual Modeling and Data for Model-Driven Engineering, International Workshop on {MDE} for Smart IoT Systems, 4th International Workshop on (Meta)Modeling for Healthcare Systems, and 20th International Workshop on {OCL} and Textual Modeling Co-Located with Software Technologies: Applications and Foundations, Federation of Conferences {(STAF} 2021), Virtual Event / Bergen, Norway, June 21-25, 2021, CEUR-WS.org, 2021, pp. 54–64.
2021 | Conference Paper | LibreCat-ID: 27479
MEI Meets NFDI4Culture
K. Richts-Matthaei, M. Albrecht-Hohmaier, D. Röwenstrunk, A. Münzmay, in: 2021.
LibreCat
K. Richts-Matthaei, M. Albrecht-Hohmaier, D. Röwenstrunk, A. Münzmay, in: 2021.
2021 | Journal Article | LibreCat-ID: 27528
Konstruktionsregeln für additiv gefertigte Partikeldämpfer/Design rules for additive manufactured particle dampers
T. Künneke, D. Zimmer, Konstruktion (2021) 72–78.
LibreCat
| DOI
T. Künneke, D. Zimmer, Konstruktion (2021) 72–78.
2021 | Journal Article | LibreCat-ID: 21004
AutoML for Multi-Label Classification: Overview and Empirical Evaluation
M.D. Wever, A. Tornede, F. Mohr, E. Hüllermeier, IEEE Transactions on Pattern Analysis and Machine Intelligence (2021) 1–1.
LibreCat
| DOI
M.D. Wever, A. Tornede, F. Mohr, E. Hüllermeier, IEEE Transactions on Pattern Analysis and Machine Intelligence (2021) 1–1.
2021 | Journal Article | LibreCat-ID: 21092
Predicting Machine Learning Pipeline Runtimes in the Context of Automated Machine Learning
F. Mohr, M.D. Wever, A. Tornede, E. Hüllermeier, IEEE Transactions on Pattern Analysis and Machine Intelligence (n.d.).
LibreCat
F. Mohr, M.D. Wever, A. Tornede, E. Hüllermeier, IEEE Transactions on Pattern Analysis and Machine Intelligence (n.d.).
2021 | Journal Article | LibreCat-ID: 21125
Ordered arrays of Si nanopillars with alternating diameters fabricated by nanosphere lithography and metal-assisted chemical etching
M. Kismann, D.T. Riedl, P.D.J.K. Lindner, Materials Science in Semiconductor Processing (2021).
LibreCat
M. Kismann, D.T. Riedl, P.D.J.K. Lindner, Materials Science in Semiconductor Processing (2021).
2021 | Conference Paper | LibreCat-ID: 21326
Cutting through the Jungle: Disambiguating Model-based Traceability Terminology (Extended Abstract)
J. Holtmann, J.-P. Steghöfer, M. Rath, D. Schmelter, in: A. Koziolek, I. Schaefer, C. Seidl (Eds.), Software Engineering 2021, 2021, pp. 59–60.
LibreCat
| Files available
| DOI
J. Holtmann, J.-P. Steghöfer, M. Rath, D. Schmelter, in: A. Koziolek, I. Schaefer, C. Seidl (Eds.), Software Engineering 2021, 2021, pp. 59–60.