Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
2811 Publications
2022 | Conference Paper | LibreCat-ID: 33981
Ehlert, Meik, Christian Henke, and Ansgar Trächtler. “Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units.” In Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. SCITEPRESS - Science and Technology Publications, 2022. https://doi.org/10.5220/0011305700003274.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30263
Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Innovative Assistance System for Setting up a Mechatronic Straightening Machine,” 2022. https://doi.org/10.4028/p-vs07w9.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30265
Bader, Fabian, Lukas Bathelt, Eugen Djakow, Christian Henke, Werner Homberg, and Ansgar Trächtler. “An Approach for an Innovative 3d Steel Strip Straightening Machine for Curvature and Saber Compensation,” 2022. https://doi.org/10.4028/p-87wvu0.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33982
Koppert, Steven, Christian Henke, Ansgar Trächtler, and Stefan Möhringer. “Tool Wear Monitoring of a Tree Log Bandsaw Using a Deep Convolutional Neural Network on Challenging Data.” IFAC-PapersOnLine 55, no. 2 (2022): 554–60. https://doi.org/10.1016/j.ifacol.2022.04.252.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33978
Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Mechatronische Richtapparate: Intelligente Richttechnik von Hochfesten Flachdrähten.” In Fachtagung VDI MECHATRONIK 2022 , 19–24. Darmstadt, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33469
Schütz, Stefan, Robin Schmidt, Christian Henke, and Ansgar Trächtler. “Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC.” In 2022 IEEE International Systems Conference (SysCon), 1–8. IEEE, 2022. https://doi.org/10.1109/syscon53536.2022.9773878.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33976
Lenz, Cederic , Fabian Hanke, Christian Henke, and Ansgar Trächtler. “Anomaly Detection in Hot Forming Processes Using Hybrid Modeling - Part II.” In 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ). IEEE, 2022. https://doi.org/10.1109/ETFA52439.2022.9921510.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34113
Haase, Michael, and Detmar Zimmer. “Systematic Investigations Concerning Eddy Currents in Additively Manufactured Structures.” In Innovative Product Development by Additive Manufacturing 2021. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-031-05918-6_10.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30962
Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Numerical Investigation of a Friction Test to Determine the Friction Coefficients for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221093468.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29951 | 
Martin, Sven, Christian Roman Bielak, Mathias Bobbert, Thomas Tröster, and Gerson Meschut. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, 2022. https://doi.org/10.1007/s11740-021-01103-w.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32813 |
Martin, Sven, Kristijan Kurtusic, and Thomas Tröster. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.” Key Engineering Materials 927 (2022). https://doi.org/ https://doi.org/10.4028/p-09md1c.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34000
Rozo Vasquez, Julian, Hanigah Kanagarajah, Bahman Arian, Lukas Kersting, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.” Practical Metallography 59, no. 11 (2022): 660–75. https://doi.org/10.1515/pm-2022-0064.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33999
Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.” Key Engineering Materials 926 (2022): 862–74. https://doi.org/10.4028/p-yp2hj3.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36563
Rozo Vasquez, Julian, Frank Walther, Bahman Arian, Werner Homberg, Lukas Kersting, and Ansgar Trächtler. “Soft Sensor Concept for Micromagnetic Depth-Specific Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” In Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.
LibreCat
2022 | Book | LibreCat-ID: 36412
Kersting, Lukas, Ansgar Trächtler, Bahman Arian, Werner Homberg, Julian Rozo Vasquez, and Frank Walther. Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile. Magdeburg: Diedrich, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30228
Klippstein, Sven Helge, Florian Heiny, Nagaraju Pashikanti, Monika Gessler, and Hans-Joachim Schmid. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.” JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022): 1149–1157. https://doi.org/10.1007/s11837-021-05042-w .
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33356 |
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” In Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium. Austin, TX, USA, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 44838
Yigitbas, Enes. “Einsatz Und Evaluation von Virtual Reality-Technologie in Einem Informatik-Seminar.” die hochschullehre Jahrgang 8/2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30921
Held, Philip, Melanie Engelkemeier, Syamsundar De, Sonja Barkhofen, Jan Sperling, and Christine Silberhorn. “Driven Gaussian Quantum Walks.” Physical Review A 105, no. 4 (2022). https://doi.org/10.1103/physreva.105.042210.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 46289 |
Banh, Ngoc Chi, Ingrid Scharlau, and Katharina J. Rohlfing. “Folgen Wiederholter Negation Auf Die Aufmerksamkeit.” In 52. Kongress Der Deutschen Gesellschaft Für Psychologie, edited by Christina Bermeitinger and Werner Greve. Pabst Science Publishers, 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 46285
Peters, Tobias Martin, and Ingrid Scharlau. “Gesundes Misstrauen Gegenüber Erklärungen.” In 52. Kongress Der Deutschen Gesellschaft Für Psychologie, edited by Christina Bermeitinger and Werner Greve. 52. Kongress Der Deutschen Gesellschaft Für Psychologie - Abstracts. Pabst Science Publisher, 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 31871
Kletetzka, Ivo, and Sven Helge Klippstein. “Pulver im 3D-Druck - von Mascarabürsten bis zum Interieur eines Mini-Coopers (Vortrag).” In 3D-DRUCK HAUTNAH - Der Einfluss einer Zukunftstechnologie auf unser Leben . Universität Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43011
Hanselle, Felix Paul. Untersuchung Und Modellierung Der Materialeigenschaften von Glaskugelgefüllten, Im Lasersinterprozess Verarbeiteten Dry-Blends, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43010
Kosanke, Maren. Oberflächenmodifikation von Glaskugeln Zur Verbesserung Der Adhäsion Im Lasersinterverfahren. Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 43007
Henke, Frederic. Potenzialanalyse für die Nutzung additiver Fertigungsverfahren bei einem Büromöbelhersteller und Realisierung eines Beispielbauteils (Studienarbeit). Paderborn, 2022.
LibreCat
2022 | Mastersthesis | LibreCat-ID: 46858
Ostermeier, Jakob. Einfluss des Lasersinter-Prozesses auf die Recyclingfähigkeit von flammgeschütztem PA12 Pulver, 2022.
LibreCat
2022 | Bachelorsthesis | LibreCat-ID: 43012
Sural, Ilknur. Einfluss der Lagerdauer von PA12- Lasersinterpulver auf die Verarbeitungs- und Bauteileigenschaft. Paderborn, 2022.
LibreCat
2022 | Book | LibreCat-ID: 47417
Föllinger, Otto, Ulrich Konigorski, Boris Lohmann, Günter Roppenecker, and Ansgar Trächtler. Regelungstechnik. Einführung in die Methoden und ihre Anwendung. 13th ed. Berlin: VDE-Verlag, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33696 |
Wiechmann, Jana, Thomas Glarner, Frederik Rautenberg, Petra Wagner, and Reinhold Haeb-Umbach. “Technically Enabled Explaining of Voice Characteristics.” In 18. Phonetik Und Phonologie Im Deutschsprachigen Raum (P&P), 2022.
LibreCat
| Files available
2022 | Book Review | LibreCat-ID: 35901 |
Böttger, Lydia. “Lydia Böttger (Universität Paderborn) rezensiert: Michalak, Magdalena; Döll, Marion (Hrsg.) (2021): Lehrwerke und Lehrmaterialien im Kontext des Deutschen als Zweitsprache und der sprachlichen Bildung. [Deutsch als Zweitsprache Positionen, Perspektiven, Potenziale, Bd. 2]. Münster, New York: Waxmann, 164 Seiten. ISBN 978-3-8309-4105-7.” www.daz-portal.de, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33509
Marschalt, Christoph, Dominik Schroder, Sven Lange, Ulrich Hilleringmann, Christian Hedayat, Harald Kuhn, Denis Sievers, and Jens Förstner. “Far-Field Calculation from Magnetic Huygens Box Data Using the Boundary Element Method.” In 2022 Smart Systems Integration (SSI). Grenoble, France: IEEE, 2022. https://doi.org/10.1109/ssi56489.2022.9901431.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30883
Krings, Sarah Claudia, Enes Yigitbas, Kai Biermeier, and Gregor Engels. “Design and Evaluation of AR-Assisted End-User Robot Path Planning Strategies.” In Proceedings of the 14th ACM SIGCHI Symposium on Engineering Interactive Computing Systems (EICS 2022), 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34001 |
Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, and Julian Rozo Vasquez. “Produktkennzeichnung Durch Lokal Definierte Einstellung von Ferromagnetischen Eigenschaften Beim Drückwalzen von Metastabilen Stahlwerkstoffen.” In 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, 333–47. Aachen, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 34003 |
Arian, Bahman, Annika Oesterwinter, Werner Homberg, Julian Rozo Vasquez, Frank Walther, Lukas Kersting, and Ansgar Trächtler. “A Flow Forming Process Model to Predict Workpiece Properties in AISI 304L.” In 19th Int. Conference on Metal Forming 2022, 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33852 |
Moritzer, Elmar, and Felix Hecker. “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS.” In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 2011–18, 2022. https://doi.org/10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30220 |
Kletetzka, Ivo, Roland Gawlikowicz, and Hans-Joachim Schmid. “Effects of Spherical Fillers on the Processability and Mechanical Properties of PA613 and PP-Based LS Dry Blends.” In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022. http://dx.doi.org/10.26153/tsw/44558.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
Kletetzka, Ivo, Sven Helge Klippstein, and Hans-Joachim Schmid. “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder.” In Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Vol. 33. Austin: Laboratory for Freeform Fabrication and University of Texas, 2022. http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 50744 |
Bödger, Christian, Christian Weiss, Ekkehard Schiefer, Daniel Heussen, and Constantin Haefner. “Evaluation of the Ecological Footprint for Parts from AlSi10Mg Manufactured by Laser Powder Bed Fusion.” In Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2022.
LibreCat
| Files available
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33853 |
Moritzer, Elmar, and Felix Hecker. “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS.” In Proceedings of the 33rd Annual Freeform Fabrication Symposium, edited by David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Desiderio Kovar, Carolyn C. Seepersad, and Mehran Tehrani, 1844–58, 2022. https://doi.org/10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 51348
Schmid, Ute, and Britta Wrede. “What Is Missing in XAI So Far?” KI - Künstliche Intelligenz 36, no. 3–4 (2022): 303–15. https://doi.org/10.1007/s13218-022-00786-2.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 51366
Schmid, Ute, and Britta Wrede. “Explainable AI.” KI - Künstliche Intelligenz 36, no. 3–4 (2022): 207–10. https://doi.org/10.1007/s13218-022-00788-0.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 51365
Wrede, Britta. “AI: Back to the Roots?” KI - Künstliche Intelligenz 36, no. 2 (2022): 117–20. https://doi.org/10.1007/s13218-022-00773-7.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 51349
Fisher, Josephine B., Vivien Lohmer, Friederike Kern, Winfried Barthlen, Sebastian Gaus, and Katharina Rohlfing. “Exploring Monological and Dialogical Phases in Naturally Occurring Explanations.” KI - Künstliche Intelligenz 36, no. 3–4 (2022): 317–26. https://doi.org/10.1007/s13218-022-00787-1.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 51344
Rohlfing, Katharina, Anna-Lisa Vollmer, Jannik Fritsch, and Britta Wrede. “Which ‘Motionese’ Parameters Change with Children’s Age? Disentangling Attention-Getting from Action-Structuring Modifications.” Frontiers in Communication 7 (2022). https://doi.org/10.3389/fcomm.2022.922405.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 51343
Battefeld, Dominik, and Stefan Kopp. “Formalizing Cognitive Biases in Medical Diagnostic Reasoning.” In Presented at the 8th Workshop on Formal and Cognitive Reasoning (FCR), Trier., 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 51346
Groß, André, Christian Schütze, Britta Wrede, and Birte Richter. “An Architecture Supporting Configurable Autonomous Multimodal Joint-Attention-Therapy for Various Robotic Systems.” In INTERNATIONAL CONFERENCE ON MULTIMODAL INTERACTION, 154–59. ACM, 2022. https://doi.org/10.1145/3536220.3558070.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 51347
Schütze, Christian, André Groß, Britta Wrede, and Birte Richter. “Enabling Non-Technical Domain Experts to Create Robot-Assisted Therapeutic Scenarios via Visual Programming.” In INTERNATIONAL CONFERENCE ON MULTIMODAL INTERACTION, 166–70. ACM, 2022. https://doi.org/10.1145/3536220.3558072.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 46582
Ried, Dennis, and Clemens Gubsch. “METAdata and MetaDATA.” edited by Stefan Münnich and David Rizo, 2022. https://doi.org/10.17613/50T9-Z881.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 48780
Muschalik, Maximilian, Fabian Fumagalli, Barbara Hammer, and Eyke Huellermeier. “Agnostic Explanation of Model Change Based on Feature Importance.” KI - Künstliche Intelligenz 36, no. 3–4 (2022): 211–24. https://doi.org/10.1007/s13218-022-00766-6.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221075838.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29505
Neuser, Moritz, Olexandr Grydin, Y. Frolov, and Mirko Schaper. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, 2022. https://doi.org/10.1007/s11740-022-01106-1.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 29771
Grydin, Olexandr, Dag Mortensen, Moritz Neuser, Dag Lindholm, Hallvard G. Fjaer, and Mirko Schaper. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.” In Light Metals 2022. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-030-92529-1_96.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34215
Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 44088 |
Schmidt, Falko, Agnieszka L. Kozub, Uwe Gerstmann, Wolf Gero Schmidt, and Arno Schindlmayr. “A Density-Functional Theory Study of Hole and Defect-Bound Exciton Polarons in Lithium Niobate.” Crystals 12, no. 11 (2022). https://doi.org/10.3390/cryst12111586.
LibreCat
| Files available
| DOI
| WoS
2021 | Dissertation | LibreCat-ID: 24760
Delfs, Patrick. Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile. Vol. 22. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag GmbH, 2021.
LibreCat
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 24770
Schumacher, Christian. Erarbeitung eines methodischen Vorgehens zur merkmalspezifischen Charakterisierung der Verarbeitungseignung von nicht verstärkten und faserverstärkten Kunststoffen im Fused Deposition Modeling am Beispiel von Polyamid 6. Vol. 24. Forschungsberichte des Direct Manufacturing Research Centers. Düren: Shaker Verlag, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 25272
Engelkemeier, Katja, Aijia Sun, Dietrich Voswinkel, Olexandr Grydin, Mirko Schaper, and Wolfgang Bremser. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” ChemElectroChem, 2021, 2155–68. https://doi.org/10.1002/celc.202100216.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 25576
Moritzer, Elmar, Dimitri Krassmann, and Johannes Brikmann. “Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 25577
Moritzer, Elmar, Dimitri Krassmann, and Johannes Brikmann. “Fügen von Thermoplastischen Composites Mit Metallteilen Durch Spritznieten.” Joining Plastics 15, no. 3–4 (2021).
LibreCat
2021 | Journal Article | LibreCat-ID: 25605 |
Spreyer, Florian, Claudia Ruppert, Philip Georgi, and Thomas Zentgraf. “Influence of Plasmon Resonances and Symmetry Effects on Second Harmonic Generation in WS2–Plasmonic Hybrid Metasurfaces.” ACS Nano 15, no. 10 (2021): 16719–28. https://doi.org/10.1021/acsnano.1c06693.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 20244 |
Gottschalk, Sebastian, Jonas Kirchhoff, and Gregor Engels. “Extending Business Model Development Tools with Consolidated Expert Knowledge .” In Business Modeling and Software Design, edited by Boris Shishkov, 2021. https://doi.org/10.1007/978-3-030-79976-2_1.
LibreCat
| Files available
| DOI
2021 | Journal Article | LibreCat-ID: 28017
Heiland, Steffen, Benjamin Milkereit, Kay-Peter Hoyer, Evgeny Zhuravlev, Olaf Keßler, and Mirko Schaper. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials, 2021. https://doi.org/10.3390/ma14237190.
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 28099 |
Menzel, Johannes, Christian Plessl, and Tobias Kenter. “The Strong Scaling Advantage of FPGAs in HPC for N-Body Simulations.” ACM Transactions on Reconfigurable Technology and Systems 15, no. 1 (2021): 1–30. https://doi.org/10.1145/3491235.
LibreCat
| DOI
| Download (ext.)
2021 | Dissertation | LibreCat-ID: 28371
Drewel, Marvin. Systematik zum Einstieg in die Plattformökonomie. Vol. 397. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 28372
Frank, Maximilian. Systematik zur Planung des organisationalen Wandels zum Smart Service-Anbieter. Vol. 398. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 28374
Bretz, Lukas. Rahmenwerk zur Planung und Einführung von Systems Engineering und Model-Based Systems Engineering. Vol. 401. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 28440 |
Triebus, Marcel, Alexander Reitz, Olexandr Grydin, Julian Grenz, Andreas Schneidt, Rüdiger Erhardt, Thomas Tröster, and Mirko Schaper. “Forming Simulation of Tailored Press Hardened Parts.” In 13th European LS-DYNA Conference 2021, 2021.
LibreCat
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
Tröster, Thomas, Florian Pfeifer, Bernard Nacke, and André Dietrich. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Vol. P1038. FOSTA-Berichte. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24095 |
Moritzer, Elmar, Felix Hecker, and André Hirsch. “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen.” Kunststoffland NRW report, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24161
Moritzer, Elmar, and Michael Kröker. “Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen.” CU reports, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24165
Moritzer, Elmar, and Michael Kröker. “Simulative Analysis of the Filling Process in the 2K GITBlow Process on Organo Sheets,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24168
Moritzer, Elmar, and Julian Wächter. “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität.” Plastverarbeiter, no. 04 (2021): 30–32.
LibreCat
2021 | Journal Article | LibreCat-ID: 24283
Malatyali, Hatice, Volker Schöppner, Nils Rabeneck, Felix Hanselle, Laura Austermeier, and David Karch. “A Model for the Carbon Fiber Breakage along the Twin‐screw Extruder.” SPE Polymers, 2021, 145–52. https://doi.org/10.1002/pls2.10040.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24315
Malatyali, Hatice, Volker Schöppner, Ella Lochbaum, Igor Bomm, and Felix Hanselle. “The Influence of Process Conditions on the Fiber Length Reduction for Recycled Carbon Fibers.” In SPE ANTEC, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24316
Malatyali, Hatice, Volker Schöppner, Seyit Ali Akar, Felix Hanselle, and Laura Austermeier. “Reproducibility Analysis of Fiber Length Measurements during Processing with Twin Screw Extruders.” In SPE ANTEC, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24372
Gevers, Karina, and Volker Schöppner. “Lebensdauer vorhersagen?” K-Zeitung, n.d.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
Gevers, Karina, Volker Schöppner, and Eyke Hüllermeier. “Heated Tool Butt Welding of Two Different Materials – Established Methods versus Artificial Intelligence,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
Arndt, Theresa, and Volker Schöppner. “Development of Scale up Rules for Quasi-Simultaneous Laser Transmission Welding of Thermoplastics,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24528
Hopp, Matthias, and Frederik Marvin Mühlhoff. “Separation of Multi-Component Parts for Mechanical Recycling – An Approach to Produce Hard-Soft Combinations with a Better Recyclability.” In 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). USA, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24556
Moritzer, Elmar, Felix Hecker, and André Hirsch. “Kleine Tropfen, große Wirkung.” Kunststoffe, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24589
Zhuravlev, Evgeny, Benjamin Milkereit, Bin Yang, Steffen Heiland, Pascal Vieth, Markus Voigt, Mirko Schaper, Guido Grundmeier, Christoph Schick, and Olaf Kessler. “Assessment of AlZnMgCu Alloy Powder Modification for Crack-Free Laser Powder Bed Fusion by Differential Fast Scanning Calorimetry.” Materials & Design, 2021. https://doi.org/10.1016/j.matdes.2021.109677.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 26180
Michael, Jan, Eva-Maria Grote, Stefan Pfeifer, Rik Rasor, Christian Henke, Ansgar Trächtler, and Lydia Kaiser. “Towards the Concept of a Digital Green Twin for a Sustainable Product Lifecycle,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26628
Malatyali, Hatice, and Volker Schöppner. “Investigation of Shear Rates in Twin-Screw Extruders Using CFD Simulations.” In 36th PPS, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26629
Malatyali, Hatice, Volker Schöppner, and Theresa Hoemann. “Investigation of the Influence of Process and Screw Configurations on Fiber Length Distribution for Recycled Carbon Fiber.” In 36th PPS, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26630
Altepeter, Matthias, Volker Schöppner, and Sven Wanke. “Analysis and Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder,” 2021.
LibreCat
2021 | Dissertation | LibreCat-ID: 26900
Sieger, Alexander. Mikrostrukturausprägung additiv gefertigter Gitterstrukturen. Vol. 23. Forschungsberichte des Direct Manufacturing Research Centers, 2021.
LibreCat
2021 | Book (Editor) | LibreCat-ID: 26996
Koch, Rainer, Iris Gräßler, Detmar Zimmer, and Thomas Tröster, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol. 25. Forschungsberichte des Direct Manufacturing Research Centers (DMRC). Düren: Shaker Verlag, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26997
Ehlert, Meik, Jan Michael, Christian Henke, Ansgar Trächtler, Matthias Kalla, Bakr Bagaber, Bernd Ponick, and Axel Mertens. “Connecting Energy Storages from Tool Independent, Signal-Flow Oriented FMUs.” In Proceedings of the International Conference on SMACD and 16th Conference on PRIME, 164–67, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 27087
Gabriel, Stefan, Nadine Niewöhner, Laban Asmar, Arno Kühn, and Roman Dumitrescu. “Integration of Agile Practices in the Product Development Process of Intelligent Technical Systems.” In Procedia CIRP, 100:427–32. Elsevier, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 27094
Wiecher, Carsten, Joel Greenyer, Carsten Wolff, Harald Anacker, and Roman Dumitrescu. “Iterative and Scenario-Based Requirements Specification in a System of Systems Context.” In Requirements Engineering: Foundation for Software Quality, REFSQ 2021, edited by Fabiano Dalpiaz and Paola Spoletini. Cham, Switzerland: Springer Nature Switzerland AG, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 27123
Poddubnyi, Vladimir I., Ansgar Trächtler, Andreas Warkentin, and Christian Henke. “Model of a Triangular Caterpillar Drive and Analysis of Vertical Vehicle Dynamics.” Russian Engineering Research 41, no. 3 (2021): 198–201.
LibreCat
2021 | Conference Paper | LibreCat-ID: 27365
Meyer, Marius. “Towards Performance Characterization of FPGAs in Context of HPC Using OpenCL Benchmarks.” In Proceedings of the 11th International Symposium on Highly Efficient Accelerators and Reconfigurable Technologies, 2021. https://doi.org/10.1145/3468044.3468058.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 27366
Moritzer, Elmar, and Felix Hecker. “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen.” Jahresmagazin Kunststofftechnik, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 27418
Weidmann, Nils, and Anthony Anjorin. “EMoflon: : Neo - Consistency and Model Management with Graph Databases.” In {STAF} 2021 Workshop Proceedings: 9th International Workshop on Bidirectional Transformations, Joint Workshop on Foundations and Practice of Visual Modeling and Data for Model-Driven Engineering, International Workshop on {MDE} for Smart IoT Systems, 4th International Workshop on (Meta)Modeling for Healthcare Systems, and 20th International Workshop on {OCL} and Textual Modeling Co-Located with Software Technologies: Applications and Foundations, Federation of Conferences {(STAF} 2021), Virtual Event / Bergen, Norway, June 21-25, 2021, edited by Ludovico Iovino and Lars Michael Kristensen, 2999:54–64. {CEUR} Workshop Proceedings. CEUR-WS.org, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 27479
Richts-Matthaei, Kristina, Martin Albrecht-Hohmaier, Daniel Röwenstrunk, and Andreas Münzmay. “MEI Meets NFDI4Culture,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 27528
Künneke, Thomas, and Detmar Zimmer. “Konstruktionsregeln Für Additiv Gefertigte Partikeldämpfer/Design Rules for Additive Manufactured Particle Dampers.” Konstruktion, 2021, 72–78. https://doi.org/10.37544/0720-5953-2021-11-12-72.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21004
Wever, Marcel Dominik, Alexander Tornede, Felix Mohr, and Eyke Hüllermeier. “AutoML for Multi-Label Classification: Overview and Empirical Evaluation.” IEEE Transactions on Pattern Analysis and Machine Intelligence, 2021, 1–1. https://doi.org/10.1109/tpami.2021.3051276.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21092
Mohr, Felix, Marcel Dominik Wever, Alexander Tornede, and Eyke Hüllermeier. “Predicting Machine Learning Pipeline Runtimes in the Context of Automated Machine Learning.” IEEE Transactions on Pattern Analysis and Machine Intelligence, n.d.
LibreCat
2021 | Journal Article | LibreCat-ID: 21125
Kismann, Michael, Dr. Thomas Riedl, and Prof. Dr. Jörg KN Lindner. “Ordered Arrays of Si Nanopillars with Alternating Diameters Fabricated by Nanosphere Lithography and Metal-Assisted Chemical Etching.” Materials Science in Semiconductor Processing, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21326
Holtmann, Jörg, Jan-Phillipp Steghöfer, Michael Rath, and David Schmelter. “Cutting through the Jungle: Disambiguating Model-Based Traceability Terminology (Extended Abstract).” In Software Engineering 2021, edited by Anne Koziolek, Ina Schaefer, and Christoph Seidl, P-310:59–60. Lecture Notes in Informatics (LNI), 2021. https://doi.org/10.18420/SE2021_18.
LibreCat
| Files available
| DOI