Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

1764 Publications


2015 | Conference Paper | LibreCat-ID: 22187
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid, “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 540–549.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22189
P. Delfs, M. Toews, and H.-J. Schmid, “Surface roughness optimized alignment of parts for additive manufacturing processes,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1334–1344.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22199
S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates,” in Proceedings of the Rapid Tech 2015, 2015, pp. 63–78.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 22394
G. dell’Aere and D. Zimmer, “On design for Additive Manufacturing - evaluating geometrical limitations,” Rapid Prototyping Journal, vol. 21, no. 6, pp. 662–670, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22395
T. Lieneke et al., “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Proceedings of the Rapid Tech 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22396
T. Lieneke et al., “Systematical determination of tolerances for additive manufacturing by measuring linear dimensions,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 371–384.
LibreCat | DOI
 

2015 | Dissertation | LibreCat-ID: 22397
G. Adam, Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling. Shaker Verlag, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22398
G. Adam, “On tolerances for additive manufacturing,” in Inside 3D Printing Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22399
T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22400
T. Lieneke, “Systematical determination of dimensional tolerances for additive manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 22401
C. Hölscher, M. Strop, and D. Zimmer, “Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe , vol. 67, no. 1–2, pp. 55–66, 2015.
LibreCat
 

2015 | Dissertation | LibreCat-ID: 22402
A. Wiehe, Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer Bremsen. Der Andere Verlag, 2015.
LibreCat
 

2015 | Patent | LibreCat-ID: 22530
D. Zimmer, K. Nolte, and J. Hütte, “Wellendichtsysteme.” 2015.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 22679
B. Teschome, S. Facsko, K. V. Gothelf, and A. Keller, “Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing,” Langmuir, vol. 31, pp. 12823–12829, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 22680
I. Giner, A. Keller, and G. Grundmeier, “Fundamental understanding of the corrosion and biomineralization of MgO surfaces – An in situ AFM study,” Corrosion Science, vol. 100, pp. 496–503, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 22681
I. Wittenbrink et al., “Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells,” Biomaterials, vol. 62, pp. 58–65, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 22682
M. Mayer, A. Keller, U. Szewzyk, and H.-J. Warnecke, “On the way to identify microorganisms in drinking water distribution networks via DNA analysis of the gut content of freshwater isopods,” Journal of Biotechnology, vol. 201, pp. 54–59, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22742
M. Becker, S. Lehrig, and S. Becker, “Systematically Deriving Quality Metrics for Cloud Computing Systems,” in {Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}, 2015, vol. 15, pp. 169–174.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 228
R. Fahr and B. Mir Djawadi, “‘…and they are really lying’: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment.,” Journal of Economic Psychology, pp. 48–59, 2015.
LibreCat | Files available | DOI
 

2015 | Journal Article | LibreCat-ID: 22809
A. K. Rai, S. Gordon, A. Ludwig, A. D. Wieck, A. Zrenner, and D. Reuter, “Spatially indirect transitions in electric field tunable quantum dot diodes,” physica status solidi (b), pp. 437–441, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 22857
R. Bandorf, S. Waschke, F. C. Carreri, M. Vergöhl, G. Grundmeier, and G. Bräuer, “Direct metallization of PMMA with aluminum films using HIPIMS,” Surface and Coatings Technology, pp. 77–81, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22888
T. Westermann, H. Anacker, R. Dumitrescu, U. Frank, and A. Hessenkämper, “ Interdisciplinary System Architecture for Intelligent Technical Systems,” in Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE2015), Houston, Texas, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22889
C. Tschirner, L. H. Bretz, R. Dumitrescu, and J. Gausemeier, “Applying Model-Based Systems Engineering for Product Engineering Management - Concepts for Industrial Application,” in 1st International Symposium on Systems Engineering (IEEE ISSE), Rome, Italy, 28. - 30. Sep. 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22890
M. Rabe, H. Anacker, T. Westermann, and R. Dumitrescu, “Potential of using model-based systems engineering to improve the development process of engineering-to-order products in the field of machinery and plant engineering,” in 4th International Conference on Advances in Mechanical Engineering, 16. - 27. Aug. 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22891
J. Roßmann et al., “Architecture for Integrated Development of Complex Systems With Model-Based System Specification and Simulation,” in ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, USA, 2. - 5. Aug. 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22892
T. Westermann, H. Anacker, and R. Dumitrescu, “Improving order fulfillment processes with MBSE,” in 20th International Conference on Engineering and Design (ICED15), Milan, Italy, 27. - 30. Jul. 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22893
C. Bremer, M. Hillebrand, B. Hassan, and R. Dumitrescu, “Konzept für das ganzheitliche Testen komplexer mechatronischer Systeme,” in Digitales Engineering zum Planen, Testen und Betreiben Technischer Systeme. IFF Wissenschaftstage, Magdeburg, 24. - 25. Jun. 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22896
C. Tschirner, R. Dumitrescu, M. Bansmann, and J. Gausemeier, “Tailoring Model-Based Systems Engineering - Concepts for Industrial Application,” in IEEE Systems Conference (SysCon) , Vancouver, 13. - 16. Apr. 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22897
A. M. Czaja and R. Dumitrescu, “Guideline for a target-oriented Systems Engineering Process in small and medium sized enterprises,” in 4th International Conference on Advances in Mechanical Engineering, German-Malaysian Workshop Series 2015, Systems Engineering for Advanced Mechatronics, Bali, Indonesia, 2015, ICAME, 2015.
LibreCat
 

2015 | Newspaper Article | LibreCat-ID: 22899
R. Dumitrescu, C. Bremer, A. Kühn, A. Trächtler, and T. Frieben, “Model-based development of products, processes and production resources - A state oriented approach for an integrated system model of objects, processes and systems,” at-Automatisierungstechnik 63 (10), no. 10, pp. 844–857, 2015.
LibreCat
 

2015 | Bachelorsthesis | LibreCat-ID: 229
H. Schulz, Zur Verbreitung von Informationen in sozialen Netzwerken - eine wirtschaftspolitische Analyse. Universität Paderborn, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22900
J. Roßmann et al., “Integrierte Entwicklung komplexer Systeme mit modellbasierter Systemspezifikation und -simulation,” in Wissenschaftsforum Intelligente Technische Systeme (WinTeSys), 2015.
LibreCat
 

2015 | Newspaper Article | LibreCat-ID: 22901
D. Kliewe, L. Kaiser, R. Dumitrescu, and J. Gausemeier, “Approach for identifying components worthy of protection of Cyber-Physical Systems (CPS) based on a system model,” Jurnal Teknologi, vol. 76 (4), no. 4, pp. 7–11, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22902
M. Bansmann, C. Tschirner, and R. Dumitrescu, “ Implementing Model-Based Systems Engineering based on Shared Services - Concepts for Industrial Application,” in 1st IEEE International Symposium on Systems Engineering (ISSE), Rome, Italy, 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 230
T. John and D. Kundisch, “Why Fit Leads to Surprise: An Extension of Cognitive Fit Theory to Creative Problems,” in Proceedings of the 36th International Conference on Information Systems (ICIS), Fort Worth, USA, Fort Worth, USA, 2015.
LibreCat | Files available
 

2015 | Conference Paper | LibreCat-ID: 23055
F. Abrishamchian, F. Oestersötebier, and A. Trächtler, “Feature Model Approach For Managing Variability of Dynamic Behavior Models in Mechatronic Systems,” in Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23056
F. Bertelsmeier and A. Trächtler, “Decentralized Controller Reconfiguration Strategies for Hybrid System Dynamics based on Product-Intelligence,” in 20th IEEE International Conference on Emerging Technologies and Factory Automation, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23057
K. Abdelgawad et al., “Flexible Operation Workflow of a Driving Simulation Center for ADAS Development,” in New Developments in Driving Simulation Design and Experiments, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23058
B. Hassan, J. Stöcklein, and J. Berssenbrügge, “ARTiST - An Augmented Reality Testbed for Intelligent Technical Systems,” in Virtual, Augmented and Mixed Reality VAMR 2015 Held as Part of HCI International 2015, 2015, pp. 457–469.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23059
J. Berssenbrügge, A. Trächtler, and C. Schmidt, “Visualization of Headlight Illumination for the Virtual Prototyping of Light-Based Driver Assistance Systems,” in Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2015.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 23060
M. Krüger and A. Trächtler, “Parametrische Modellordnungsreduktion für hierarchische selbstoptimierende Systeme,” at-Automatisierungstechnik, vol. 63, no. 8, pp. 633–645, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23062
F. Bertelsmeier, M. Vathauer, C. Henke, K.-E. Vathauer, and A. Trächtler, “Produkt- und lastabhängiges dezentrales Motormanagement für die Fördertechnik: Anforderungen, Design und Applikation ,” in Automation 2015, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23063
A. Pai, T. Niendorf, P. Krooß, I. Koke, A. Trächtler, and M. Schaper, “Modelling the Constitutive Behaviour of Martensite and Austenite in Shape Memory Alloys Using Closed-Form Analytical Continuous Equations,” in 7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART, 2015.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 23064
U.-H. Damerow et al., “Intelligente Biegeverfahren,” wt Werkstattstechnik online, vol. 6–2015, pp. 427–432, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23065
K. Abdelgawad, B. Hassan, J. Berssenbrügge, J. Stöcklein, and M. Grafe, “A Modular Architecture of an Interactive Simulation and Training Environment for Advanced Driver Assistance Systems,” in International Journal On Advances in Software, 2015, vol. 8, pp. 247–261.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 23066
Z. Shareef, V. Just, H. Teichrieb, and A. Trächtler, “Design and Control of Cooperative Ball Juggling Delta Robots without Visual Guidance,” Robotica, pp. 1–17, 2015.
LibreCat
 

2015 | Dissertation | LibreCat-ID: 23067
Z. Shareef, Path Planning and Trajectory Optimization of Delta Parallel Robot, vol. 345. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23068
C. Jähn, M. Fischer, M. Gerges, and J. Berssenbrügge, “Automatische Ableitung geometrischer Eigenschaften von Bauteilen aus dem 3-D-Polygonmodell,” in 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2015, vol. 342, pp. 107–120.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23069
J. Berssenbrügge, A. Trächtler, C. Schmidt, J. Stöcklein, and M. Grafe, “Visualisierung von Scheinwerfersystemen für das Virtual Prototyping von lichtbasierten Fahrerassistenzsystemen,” in 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2015, vol. 342, pp. 231–245.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23070
J. Berssenbrügge, O. Wiederkehr, C. Jähn, and M. Fischer, “Anbindung des Virtuellen Prototypen an die Partialmodelle intelligenter technischer Systeme,” in 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2015, vol. 342, pp. 65–78.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23071
D. Zimmermann, A. Kohlstedt, S. Gausemeier, and A. Trächtler, “Entwicklung eines prädiktiven Motion-Cueing-Verfahrens für den ATMOS-Fahrsimulator ,” in 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2015, vol. 342, pp. 261–272.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23072
F. Bertelsmeier, T. Engelmeier, and A. Trächtler, “Online-Rekonfiguration hybrider Regelkreise in Abhängigkeit variierender Produkteigenschaften,” in Tagungsband Mechatronik 2015, 2015, pp. 97–102.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23073
M. Lochbichler, C. Lankeit, A. Trächtler, M. Landwehr, and L. Hoischen, “Systematische Wahl der Modellierungstiefe im Entwurfsprozess mechatronischer Systeme am Beispiel eines Geldautomaten,” in Tagungsband Mechatronik, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23074
I. Koke, K. Dibblee, F. Hankeln, S. Seidel, A. Trächtler, and H.-J. Schmid, “Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen,” in 44. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik - Hochschuldidaktik im Dialog, Paderborn, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23075
J. Michael, M. Hillebrand, R. Dumitrescu, C. Henke, and A. Trächtler, “Modellbasierte Mehrzieloptimierung zur Integration von Hausgeräten in SmartGrids,” in VDI Mechatronik 2015 Tagungsband, 2015, pp. 245–250.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 23076
C. Wuthishuwong, A. Trächtler, and T. Bruns, “Safe trajectory planning for autonomous intersection management by using vehicle to infrastructure communication,” EURASIP Journal on Wireless Communications and Networking, vol. 33, no. 1, 2015.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 23077
C. Lankeit, M. Lochbichler, and A. Trächtler, “Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach,” Jurnal Teknologi, vol. 76, no. 4, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23078
C. Lankeit, M. Lochbichler, F. Oestersötebier, A. Trächtler, and M. Landwehr, “From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System,” in Proceedings, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 23079
A. Pai, A. Trächtler, and M. Schaper, “Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics,” in IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 231
M. Geierhos, S. Schulze, and F. S. Bäumer, “What did you mean? Facing the Challenges of User-generated Software Requirements,” in Proceedings of the 7th International Conference on Agents and Artificial Intelligence (ICAART), Special Session on Partiality, Underspecification, and Natural Language Processing (PUaNLP 2015), 2015, pp. 277–283.
LibreCat | Files available | DOI
 

2015 | Conference Paper | LibreCat-ID: 232
B. Monien, M. Mavronicolas, and K. Wagner, “Weighted Boolean Formula Games,” in the ´Festschrift´ Algorithms, Probability, Networks, and Games: Scientific Papers and Essays Dedicated to Paul G. Spirakis on the Occasion of His 60th Birthday, 2015, pp. 49–86.
LibreCat | Files available | DOI
 

2015 | Report | LibreCat-ID: 233 | OA
J. Blömer and K. Kohn, Voronoi Cells of Lattices with Respect to Arbitrary Norms. Universität Paderborn, 2015.
LibreCat | Files available | Download (ext.)
 

2015 | Conference Paper | LibreCat-ID: 21683
C. Lindemann, U. Jahnke, T. Reiher, and R. Koch, “Towards a sustainable and economic selection of part candidates for Additive Manufacturing,” in Rapid Prototyping Journal, 2015, vol. 21, no. 2, pp. 216–227.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21684
G. Deppe, C. Lindemann, and R. Koch, “Developement of an economic decision support for the application of Additive Manufacturing in aerospace,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1560–1563.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21685
U. Jahnke, J. Büsching, T. Reiher, and R. Koch, “Protection measures against product piracy and application by the use of AM,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1601–1611.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21686
T. Reiher and R. Koch, “FE-Optimization and data handling for Additive Manufacturing of structural parts,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1092–1103.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21700
U. Jahnke and C. Lindemann, “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy,” in Inside 3D Printing Conference and Expo, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 21701
G. Deppe, T. Reiher, and R. Koch, “Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing,” in International Conference Production Engineering and Management 2015, 2015, vol. 5, pp. 219–230.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 21703
C. Lindemann, T. Reiher, and R. Koch, “Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing,” in Paris Space Week, 2015.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 21733
A. Wiens and G. Domik, “In-Class Exercise for Shadow Mapping Algorithms,” IEEE Computer Graphics and Applications, vol. 35, no. 3, pp. 15–19, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 21734
A. Wiens and G. Domik, “In-Class Exercises for Shadow Volume Algorithms,” IEEE Computer Graphics and Applications, vol. 35, no. 4, pp. 108–112, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 21735
L. M. Encarnacao et al., “Future Directions in Computer Graphics and Visualization: From CG&A’s Editorial Board,” IEEE Computer Graphics and Applications, vol. 35, no. 1, pp. 20–32, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 21736
N. Haas et al., “Hypoplastic left heart in the 6500-year-old Detmold Child,” Lancet (London, England), vol. 385, p. 2432, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 21737
K. Zhang, Q. V. Nguyen , Z. Meng , and W. Tao, “Teaching Information Aesthetics as a Research Class in China,” IEEE Computer Graphics and Applications, vol. 35, no. 1, pp. 56–64, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 21738
R. A. Rensink, “Preparing Undergraduates for Visual Analytics,” IEEE Computer Graphics and Applications, vol. 35, no. 2, pp. 16–20, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 21739
N. M. Artner, I. Janusch, and W. G. Kropatsch, “Evaluating and Grading Students in Large-Scale Image Processing Courses,” IEEE Computer Graphics and Applications, vol. 35, no. 5, pp. 101-c3, 2015.
LibreCat | DOI
 

2015 | Journal Article | LibreCat-ID: 21740
M. Cao et al., “Educational Virtual-Wear Trial: More Than a Virtual Try-On Experience,” IEEE Computer Graphics and Applications, vol. 35, no. 6, pp. 83–89, 2015.
LibreCat | DOI
 

2015 | Book Chapter | LibreCat-ID: 21905
D. Rumlich, “Zur affektiv-motivationalen Entwicklung von Lernenden im bilingualen Sachfachunterricht,” in CLIL Revisited: Eine kritische Analyse des gegenwärtigen Standes des bilingualen Sachfachunterrichts, B. Rüschoff, J.-T. Sudhoff, and D. Wolff, Eds. Frankfurt am Main, Germany: Lang, 2015, pp. 309–330.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 21906
D. Rumlich, “Selbst(bestimmt) sind die Lernenden! Ideen und Methoden für eine studierendenzentrierte Lernveranstaltung.,” Diversität konkret, vol. 3, no. 1, pp. 1–28, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 22031
F. Knoop and V. Schöppner, “Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30,” in ASPE Spring Topical Meeting, 2015, pp. 26–31, doi: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 22044
F. Knoop and V. Schöppner, “Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 935–948, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 7722
A. Eggert, L. Steinhoff, and C. Witte, “ You Might Want to Engage Your Customers, But Choose Them Wisely: The Mixed Effects of Company-Initiated Customer Engagement on Customer Loyalty,” in 2015 AMA Summer Marketing Educators’ Conference Proceedings, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 7723
C. Cramer, E. Böhm, and A. Eggert, “Stock Market Reactions to Business Service Outsourcing in Manufacturing Firms,” in Proceedings of the 44th European Marketing Academy (EMAC) Conference, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 7724
L. Feider, I. Garnefeld, and E. Böhm, “Threatening customers not to return – An effective strategy for online retailers?,” in Proceedings of the 44th European Marketing Academy (EMAC) Conference, 2015.
LibreCat
 

2015 | Conference (Editor) | LibreCat-ID: 7760
M. Engstler, M. Fazal-Baqaie, E. Hanser, M. Mikusz, and A. Volland, Eds., Projektmanagement und Vorgehensmodelle 2015: Hybride Projektstrukturen erfolgreich umsetzen - Proceedings der gemeinsamen Tagung der Fachgruppen WI-PM und WI-VM im Fachgebiet Wirtschaftsinformatik der Gesellschaft für Informatik e.V., vol. P-250. GI, Köllen Druck+Verlag GmbH, Bonn, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 8067
M. Fazal-Baqaie, M. Grieger, and S. Sauer, “Tickets without Fine - Artifact-based Synchronization of Globally Distributed Software Development in Practice,” in Proceedings of the 16th International Conference of Product Focused Software Development and Process Improvement (PROFES 2015), 2015, vol. 9459, pp. 167–181.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 8068
M. Fazal-Baqaie and A. Raninen, “Successfully Initiating a Global Software Project,” in Industrial Proceedings of the 22nd European Systems Software & Service Process Improvement & Innovation Conference (EuroSPI22015), 2015, pp. 5.1-5.10.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 8069
B. Nagel, K. Schröder, S. Becker, S. Sauer, and G. Engels, “Kooperative Methoden- und Werkzeugentwicklung zur Cloudmigration von proprietären Anwendungskomponenten,” in Software Engineering & Management 2015, 2015, vol. LNI-239, pp. 255–260.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 5678 | OA
G. Rauchecker and G. Schryen, “High-Performance Computing for Scheduling Decision Support: A Parallel Depth-First Search Heuristic,” in Australasian Conference on Information Systems, 2015, pp. 1–13.
LibreCat | Files available
 

2015 | Journal Article | LibreCat-ID: 5679 | OA
T. Püschel, G. Schryen, D. Hristova, and D. Neumann, “Revenue Management for Cloud Computing Providers: Decision Models for Service Admission Control under Non-probabilistic Uncertainty,” European Journal of Operational Research, vol. 244, no. 2, pp. 637–647, 2015.
LibreCat | Files available
 

2015 | Journal Article | LibreCat-ID: 5701
N. Wünderlich et al., “Futurizing” Smart Service: Implications for Service Researchers and Managers.,” Journal of Services Marketing, vol. 29, no. 6/7, pp. 442–447, 2015.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 5703
A. Gustafsson et al., “Conducting Service Research that Matters.,” Journal of Services Marketing, vol. 29, no. 6/7, pp. 425–429, 2015.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 5704
A. Scherer, N. Wünderlich, and F. Von Wangenheim, “The Value of Self-Service: Long-Term Effects of Technology-Based Self-Service Usage on Customer Retention.,” MIS Quarterly, vol. 39, no. 1, pp. 177–200, 2015.
LibreCat
 

2015 | Journal Article | LibreCat-ID: 5705
E. Breugelmans et al., “Advancing Research on Loyalty Programs: A Future Research Agenda.,” Marketing Letters, vol. 26, no. 2, pp. 127–139, 2015.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 5729
L. Glanz, S. Schmidt, S. Wollny, and B. Hermann, “A vulnerability’s lifetime,” in Proceedings of the 15th International Conference on Knowledge Technologies and Data-driven Business - i-KNOW ’15, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 5730
J. Lerch and B. Hermann, “Design your analysis: a case study on implementation reusability of data-flow functions,” in Proceedings of the 4th ACM SIGPLAN International Workshop on State Of the Art in Program Analysis - SOAP 2015, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 5731
B. Hermann, M. Reif, M. Eichberg, and M. Mezini, “Getting to know you: towards a capability model for Java,” in Proceedings of the 2015 10th Joint Meeting on Foundations of Software Engineering - ESEC/FSE 2015, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 5732
M. Eichberg, B. Hermann, M. Mezini, and L. Glanz, “Hidden truths in dead software paths,” in Proceedings of the 2015 10th Joint Meeting on Foundations of Software Engineering - ESEC/FSE 2015, 2015.
LibreCat | DOI
 

2015 | Conference Paper | LibreCat-ID: 5747
E. Yigitbas, B. Mohrmann, and S. Sauer, “Model-driven UI Development Integrating HCI Patterns,” in Proceedings of the 1st Workshop on Large-scale and Model-based Interactive Systems: Approaches and Challenges, {LMIS} 2015, co-located with 7th {ACM} {SIGCHI} Symposium on Engineering Interactive Computing Systems {(EICS} 2015), Duisburg, Germany, June 23, 2015., 2015, pp. 42–46.
LibreCat
 

2015 | Conference Paper | LibreCat-ID: 5748
E. Yigitbas, S. Sauer, and G. Engels, “A Model-Based Framework for Multi-Adaptive Migratory User Interfaces,” in Human-Computer Interaction: Interaction Technologies - 17th International Conference, {HCI} International 2015, Los Angeles, CA, USA, August 2-7, 2015, Proceedings, Part {II}, 2015, pp. 563–572.
LibreCat | DOI
 

Filters and Search Terms

year=2015

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed