Elmar Moritzer

elmar.moritzer@ktp.uni-paderborn.de
ID
20531

245 Publications

Mark all

[245]
2024 | Conference Paper | LibreCat-ID: 53529
E. Moritzer and C. L. Elsner, “Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2024), St. Louis, 2024.
LibreCat
 
[244]
2023 | Conference Paper | LibreCat-ID: 48663
E. Moritzer and C. Held, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” Essen (Deutschland), 2023.
LibreCat
 
[243]
2023 | Conference Paper | LibreCat-ID: 48752
E. Moritzer and M. Scholle, “The main factors influencing glass fiber shortening in the processing of bulk molding compounds (BMC),” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
 
[242]
2023 | Conference Paper | LibreCat-ID: 48755
E. Moritzer and C. Held, “Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.
LibreCat
 
[241]
2023 | Conference Paper | LibreCat-ID: 48739
E. Moritzer, C. L. Elsner, and K. Deupmann, “Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
 
[240]
2023 | Journal Article | LibreCat-ID: 48734
E. Moritzer, F. M. Mühlhoff, D. Rauen, B. Kolbe, H. Schlee, and C. Hokamp, “Großflächig, komplex? InMould-Plasma ist die Lösung!,” Kunststoffe, 2023.
LibreCat
 
[239]
2023 | Journal Article | LibreCat-ID: 48733
E. Moritzer, S. Kartelmeyer, D. Kreamer, and C. Jaroschek, “Goodbye Hot Spots - with No Extra Energy Expenditure,” Plastics Insights, no. 7/2023, pp. 38–41, 2023.
LibreCat
 
[238]
2023 | Journal Article | LibreCat-ID: 48736
E. Moritzer, S. Kartelmeyer, D. Kraemer, and C. Jaroschek, “Hotspots ade - ohne Extra-Energieaufwand,” Kunststoffe, no. 5/2023, pp. 64–66, 2023.
LibreCat
 
[237]
2023 | Conference Paper | LibreCat-ID: 48747
E. Moritzer and C. Held, “Optimization of additively manufactured parts for direct screwing,” presented at the 76th Annual Assembly and International Conference of the international Institute of Welding (IIW), Singapur (Singapur), 2023.
LibreCat
 
[236]
2023 | Journal Article | LibreCat-ID: 48741
E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Konturnah kühlen für wenig Geld,” Kunststoffe, no. 8/2023, pp. 56–59, 2023.
LibreCat
 
[235]
2023 | Conference Paper | LibreCat-ID: 49742
F. I. Bürenhaus and E. Moritzer, “Influence of fiber geometry and sizing on glass fiber breakage,” 2023, doi: 10.1063/5.0135843.
LibreCat | DOI
 
[234]
2023 | Journal Article | LibreCat-ID: 48277 | OA
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat | DOI | Download (ext.)
 
[233]
2023 | Conference Paper | LibreCat-ID: 48357
E. Moritzer, F. Hecker, F. Knaup, and J. Wächter, “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process,” in Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), Fukuoka (Japan), 2023, pp. 170001-1-170001–5, doi: 10.1063/5.0168548.
LibreCat | DOI
 
[232]
2023 | Journal Article | LibreCat-ID: 52802
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat | DOI
 
[231]
2023 | Journal Article | LibreCat-ID: 48657
E. Moritzer, L. Tölle, C. Greb, and M. Haag, “Conceptions and Feasibility Study of Fiber Orientation in the Melt as Part of a Completely Circular Recycling Concept for Fiber-Reinforced Thermoplastics,” Journal of Composites Science, no. 7, p. 267, 2023, doi: 10.3390/jcs7070267.
LibreCat | DOI
 
[230]
2023 | Journal Article | LibreCat-ID: 48654
E. Moritzer and C. Held, “Characterization of additively manufactured parts for direct screwing,” Welding in the World, 2023, doi: 10.1007/s40194-023-01610-7.
LibreCat | DOI
 
[229]
2023 | Journal Article | LibreCat-ID: 52837
E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Conformal Cooling at Low Cost,” Plastics Insights, no. 8/2023, pp. 44–48, 2023.
LibreCat
 
[228]
2023 | Journal Article | LibreCat-ID: 42515 | OA
E. Moritzer and F. Flachmann, “Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures,” Journal of Cellular Plastics, vol. 59, no. 3, pp. 187–199, 2023, doi: 10.1177/0021955x231161175.
LibreCat | DOI | Download (ext.)
 
[227]
2022 | Report | LibreCat-ID: 34724
E. Moritzer and M. Scholle, BMC-Spritzgießen bricht die Glasfaser. 2022.
LibreCat
 
[226]
2022 | Newspaper Article | LibreCat-ID: 34732
E. Moritzer, M. Scholle, L. Tölle, and J. Bomm, “Influence of process parameter on fiber quality during fiber recycling through thermal fiber recovery,” RFP Rubber Fibres Plastics, 2022.
LibreCat
 
[225]
2022 | Newspaper Article | LibreCat-ID: 34729
E. Moritzer, M. Scholle, L. Tölle, and J. Bomm, “Einfluss der Prozessführung auf die Faserqualität beim Faserrecycling mittels thermischer Faserrückgewinnung,” GAK - Gummi Fasern Kunststoffe, 2022.
LibreCat
 
[224]
2022 | Conference Paper | LibreCat-ID: 34731
E. Moritzer and M. Richters, “Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
 
[223]
2022 | Report | LibreCat-ID: 34741
E. Moritzer, M. Kröker, and M. Scholle, Rückführung zerkleinerter Organobleche. 2022.
LibreCat
 
[222]
2022 | Conference Paper | LibreCat-ID: 34725
E. Moritzer and C. Held, “Characterization of additively manufactured plastic components for direct screwing,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2022.
LibreCat
 
[221]
2022 | Newspaper Article | LibreCat-ID: 33291
E. Moritzer and D. Rauen, “Plasmaaktivierung fehlgeschlagen!,” Kunststoffe, pp. 79–81, 2022.
LibreCat
 
[220]
2022 | Report | LibreCat-ID: 33070
A. Fuhrmann et al., Verbessertes Füllverhalten im Spritzgießprozess durch Schäumen von WPC: Bewertung des Fließverhaltens treibmittelbeladener Polymerschmelzen. Shaker, 2022.
LibreCat
 
[219]
2022 | Conference Paper | LibreCat-ID: 33288
E. Moritzer and F. I. Bürenhaus, “Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka (Japan), 2022.
LibreCat
 
[218]
2022 | Conference Paper | LibreCat-ID: 33290
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Multimaterial Injection Moulding of Thermosets and Elastomers,” presented at the ScienceBG, Burgas (Bulgaria), 2022.
LibreCat
 
[217]
2022 | Newspaper Article | LibreCat-ID: 33292
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Spritzgießen hochtemperaturbeständiger Baugruppen aus Duromeren und Elastomeren,” Kunststoffland NRW, pp. 34–35, 2022.
LibreCat
 
[216]
2022 | Conference Paper | LibreCat-ID: 33296
E. Moritzer, D. Netzband, and A. Ujma, “Messtechnische Ermittlung der Strukurintensität bei spritzgegossenen, faserverstärkten Kunststoffen,” 2022.
LibreCat
 
[215]
2022 | Journal Article | LibreCat-ID: 33859
E. Moritzer and C. L. Elsner, “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100390.
LibreCat | DOI
 
[214]
2022 | Journal Article | LibreCat-ID: 33861
E. Moritzer and J. Wächter, “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100389.
LibreCat | DOI
 
[213]
2022 | Newspaper Article | LibreCat-ID: 33987
E. Moritzer and C. L. Elsner, “Mit Gestaltungsrichtlinien zum Erfolg,” Kunststoffe, vol. 11/2022, 2022.
LibreCat
 
[212]
2022 | Newspaper Article | LibreCat-ID: 33287
E. Moritzer, C. Held, and J. Hillemeyer, “Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS,” Joining Plastic, pp. 84–90, 2022.
LibreCat
 
[211]
2022 | Newspaper Article | LibreCat-ID: 33289
E. Moritzer, C. Held, C. Hopmann, and M. Kramer, “Mit der richtigen Auslegung zur sicheren Verbindung,” Kunststoffe, pp. 30–33, 2022.
LibreCat
 
[210]
2022 | Newspaper Article | LibreCat-ID: 34728
E. Moritzer, D. Rauen, C. Schilp, and M. Scholle, “Die Vielseitigkeit von Beschichtungen im Spritzgießwerkzeug- und Formenbau,” Zeitschrift Kunststofftechnik, 2022.
LibreCat
 
[209]
2022 | Journal Article | LibreCat-ID: 33862
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.
LibreCat | DOI
 
[208]
2022 | Conference Paper | LibreCat-ID: 48354
E. Moritzer and J. Wächter, “Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process,” presented at the 37th International Conference of the Polymer Processing Society, Fukuoka (Japan), 2022.
LibreCat
 
[207]
2022 | Conference Paper | LibreCat-ID: 33852 | OA
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat | DOI | Download (ext.)
 
[206]
2022 | Journal Article | LibreCat-ID: 44302
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science , 2022.
LibreCat
 
[205]
2022 | Conference Paper | LibreCat-ID: 33853 | OA
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat | DOI | Download (ext.)
 
[204]
2022 | Journal Article | LibreCat-ID: 33856 | OA
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science, vol. 6, no. 10, Art. no. 321, 2022, doi: 10.3390/jcs6100321.
LibreCat | DOI | Download (ext.)
 
[203]
2022 | Journal Article | LibreCat-ID: 34739
E. Moritzer, C. Held, and J. Hillemeyer, “Material-specific prediction of the optimal joinig parameters for the screw blind rivet joining process,” Welding in the World, 2022.
LibreCat
 
[202]
2021 | Conference Paper | LibreCat-ID: 25576
E. Moritzer, D. Krassmann, and J. Brikmann, “Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting,” presented at the 74th Annual Assembly of the International Institute of Welding (IIW), 2021.
LibreCat
 
[201]
2021 | Journal Article | LibreCat-ID: 25577
E. Moritzer, D. Krassmann, and J. Brikmann, “Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten,” Joining Plastics, vol. 15, no. 3–4, 2021.
LibreCat
 
[200]
2021 | Newspaper Article | LibreCat-ID: 24095 | OA
E. Moritzer, F. Hecker, and A. Hirsch, “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen,” Kunststoffland NRW report, vol. 2021, no. 2, pp. 42–43, 2021.
LibreCat | Download (ext.)
 
[199]
2021 | Journal Article | LibreCat-ID: 24161
E. Moritzer and M. Kröker, “Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen,” CU reports, 2021.
LibreCat
 
[198]
2021 | Conference Paper | LibreCat-ID: 24165
E. Moritzer and M. Kröker, “Simulative analysis of the filling process in the 2K GITBlow process on organo sheets,” presented at the SPE Antec 2021, Digital, 2021.
LibreCat
 
[197]
2021 | Journal Article | LibreCat-ID: 24168
E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat
 
[196]
2021 | Newspaper Article | LibreCat-ID: 24556
E. Moritzer, F. Hecker, and A. Hirsch, “Kleine Tropfen, große Wirkung,” Kunststoffe, no. 9/2021, pp. 88–90, 2021.
LibreCat
 
[195]
2021 | Newspaper Article | LibreCat-ID: 27366
E. Moritzer and F. Hecker, “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen,” Jahresmagazin Kunststofftechnik, pp. 70–75, 2021.
LibreCat | Download (ext.)
 
[194]
2021 | Conference Paper | LibreCat-ID: 23851
E. Moritzer and F. I. Bürenhaus, “Influence of Processing Parameters on Fiber Length Degradation during Injection Molding,” in SPE ANTEC 2021 Proceedings, 2021.
LibreCat
 
[193]
2021 | Conference Paper | LibreCat-ID: 25283
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming,” presented at the 36th International Conference of the Polymer Processing Society, Montreal, Canada.
LibreCat | Files available
 
[192]
2021 | Journal Article | LibreCat-ID: 23944
E. Moritzer and M. Richters, “Characterization of wood-filled thermoplastic polyurethane for the injection modling process,” Journal of Applied Polymer Science, 2021.
LibreCat
 
[191]
2021 | Journal Article | LibreCat-ID: 23948
E. Moritzer, M. Richters, J. Hillemeyer, and D. Krassmann, “Mit dem Schraubblind-Durchsetznieten Metallteile mit Composites bei einseitiger Zugänglichkeit verbinden,” Joining Plastics, 2021.
LibreCat
 
[190]
2021 | Book | LibreCat-ID: 22032
E. Moritzer, A. Hirsch, and C. Dalmer, Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021, pp. 112–129.
LibreCat | DOI
 
[189]
2021 | Journal Article | LibreCat-ID: 24162
E. Moritzer, J. Wächter, and C. L. Elsner, “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK,” Macromolecular Symposia, vol. 395, no. 1, 2021, doi: 10.1002/masy.202000269.
LibreCat | DOI
 
[188]
2021 | Journal Article | LibreCat-ID: 24681
E. Moritzer and C. Schumacher, “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting,” Macromolecular Symposia, vol. 395, no. 1, Art. no. 2000275, 2021, doi: 10.1002/masy.202000275.
LibreCat | DOI
 
[187]
2021 | Conference Paper | LibreCat-ID: 24554
E. Moritzer, C. L. Elsner, J. Wächter, and F. Knoop, “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems,” presented at the 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
 
[186]
2021 | Journal Article | LibreCat-ID: 24555
E. Moritzer, C. L. Elsner, and C. Schumacher, “Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters,” Polymer Composites, vol. 42, no. 11, pp. 6065–6079, 2021, doi: 10.1002/pc.26285.
LibreCat | DOI
 
[185]
2021 | Newspaper Article | LibreCat-ID: 31744
E. Moritzer, J. Hillemeyer, M. Kramer, and C. Hopmann, “Designing of thermosetting plastic components  for direct screwing - Auslegung von Duroplastbauteilen zur Direktverschraubung,” Joining Plastics, pp. 94–103, 2021.
LibreCat
 
[184]
2021 | Newspaper Article | LibreCat-ID: 31740
E. Moritzer and M. Richters, “ Characterization of wood-filled thermoplastic polyurethanes for the  injection molding process,” Journal of Applied Polymer Science, vol. 138, no. 38, 2021.
LibreCat
 
[183]
2021 | Conference Paper | LibreCat-ID: 31760
E. Moritzer, D. Krassmann, and J. Brikmann, “Entwicklung der Spritzniettechnik als  werkstoffgerechtes Fügeverfahren für hybride Strukturen,” presented at the 11. Fügetechnisches  Gemeinschaftskolloquium, Dresden, 2021.
LibreCat
 
[182]
2021 | Newspaper Article | LibreCat-ID: 31762
E. Moritzer, J. Jilg, and T. Rücker, “Er kommt auf die Korngröße an, Mikrogranulat verbessert die  Verteilung feindisperser Füllstoffe in der Direktcompoundierung,” Kunststoffe, pp. 24–27, 2021.
LibreCat
 
[181]
2021 | Newspaper Article | LibreCat-ID: 31765
E. Moritzer, J. Hillemeyer, and R. Lotzin, “Fügeelement angespritzt - Einfluss auf die Verbundfestigkeit  zwischen Organoblech und Schraubblindniet untersucht,” Kunststoffe, pp. 42–45, 2021.
LibreCat
 
[180]
2021 | Newspaper Article | LibreCat-ID: 31763
E. Moritzer, M. Wortmann, P. Krieger, B. Hüsgen, and N. Frese, “Effect of Isocyanate Absorption on the  Mechanical Properties of Silicone Elastomers in Polyurethane Vacuum Casting,” ACS Omega, 2021.
LibreCat
 
[179]
2021 | Conference Paper | LibreCat-ID: 31774
E. Moritzer, J. Wächter, and C. Fuhrmann, “ INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR,” in 23rd International Conference Materials, Burgas (Bulgarien), 2021, pp. 58–67.
LibreCat
 
[178]
2021 | Newspaper Article | LibreCat-ID: 31775
E. Moritzer, “ Kühlen mit dem Wärmerohr,” Kunststoffe, pp. 64–67, 2021.
LibreCat
 
[177]
2021 | Conference Paper | LibreCat-ID: 31781
E. Moritzer and F. I. Bürenhaus, “Untersuchung der Faserlängenabnahme von kurz- und  langglasfaserverstärk-ten Thermoplasten im Spritzgießprozess,” presented at the 27. Techomer - Fachtagung über  Verarbeitung und Anwendung von Polymeren, Chemnitz (Online), 2021.
LibreCat
 
[176]
2021 | Newspaper Article | LibreCat-ID: 31778
E. Moritzer, J. Hillemeyer, and R. Lotzin, “Molding on a Joining Element - Study of the Factors Influencing  the Strength of the Bond between a Thermoplastic Composite and a Screw-in Blind Rivet,” Kunststoffe International, pp. 29–32, 2021.
LibreCat
 
[175]
2021 | Newspaper Article | LibreCat-ID: 31780
E. Moritzer, M. Wortmann, N. Frese, J. Brinkmann, A. Ehrmann, and B. Hüsgen, “Silicone Mold Accuracy in  Polyurethane Vacuum Casting,” Macromolecular Symposia, 2021.
LibreCat
 
[174]
2021 | Conference Abstract | LibreCat-ID: 31771
E. Moritzer and F. I. Bürenhaus, “Investigation of Fiber Orientation and its Influence on Fiber Length  Degradation in Simple Shear Flow for Glass Fiber Reinforced Polypropylene,” presented at the 36th International  Conference of the Polymer Processing Society (PPS), Montréal (Kanada), 2021.
LibreCat
 
[173]
2021 | Journal Article | LibreCat-ID: 26854
E. Moritzer and F. Flachmann, “Die Fließfront darf nicht brechen,” Kunststoffe, vol. 12, pp. 42–44, 2021.
LibreCat
 
[172]
2021 | Newspaper Article | LibreCat-ID: 31707
E. Moritzer, J. Hillemeyer, M. Kramer, and C. Hopmann, “Direktverschraubung von Duroplasten Eine wirtschaftliche Lösung,” Plastverarbeiter, no. 71, pp. 56–60, 2021.
LibreCat
 
[171]
2021 | Newspaper Article | LibreCat-ID: 31725
E. Moritzer et al., “Anomalous bulk  diffusion of methylene diphenyl diisocyanate in silicone elastomer,” International Journal of Heat  and Mass Transfer, 2021.
LibreCat
 
[170]
2021 | Journal Article | LibreCat-ID: 35327
M. Wortmann et al., “Anomalous bulk diffusion of methylene diphenyl diisocyanate in silicone elastomer,” International Journal of Heat and Mass Transfer, vol. 177, Art. no. 121536, 2021, doi: 10.1016/j.ijheatmasstransfer.2021.121536.
LibreCat | DOI
 
[169]
2021 | Conference Paper | LibreCat-ID: 24101 | OA
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 467–474, doi: 10.26153/tsw/17567.
LibreCat | DOI | Download (ext.)
 
[168]
2021 | Conference Paper | LibreCat-ID: 24099 | OA
E. Moritzer, F. Hecker, C. Driediger, and A. Hirsch, “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 575–584, doi: 10.26153/tsw/17577.
LibreCat | DOI | Download (ext.)
 
[167]
2021 | Conference Paper | LibreCat-ID: 24096 | OA
E. Moritzer, F. Hecker, and A. Hirsch, “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 1268–1275, doi: 10.26153/tsw/17643.
LibreCat | DOI | Download (ext.)
 
[166]
2021 | Conference Paper | LibreCat-ID: 23746
E. Moritzer and F. Flachmann, “Influence of Chemical Blowing Agents on the Filling Behavior of Wood-Plastic-Composite Melts,” in SPE ANTEC 2021: The Annual Technical Conference for Plastic Professionals, Online, 2021, pp. 536–540.
LibreCat
 
[165]
2021 | Conference Paper | LibreCat-ID: 26390
E. Moritzer and F. Flachmann, “Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC),” presented at the 36th International Conference of the Polymer Processing Society , Montreal, 2021.
LibreCat
 
[164]
2021 | Journal Article | LibreCat-ID: 31769
E. Moritzer and M. Richters, “Injection Molding of Wood-Filled Thermoplastic Polyurethane,” Journal of  Composites Science, no. 12, 2021.
LibreCat
 
[163]
2021 | Journal Article | LibreCat-ID: 31757
E. Moritzer and D. Krassmann, “Development of a new joining technology for hybrid joints of sheet metal  and continuous fiber-reinforced thermoplastics,” Welding in the World, 2021.
LibreCat
 
[162]
2020 | Journal Article | LibreCat-ID: 24183
E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, and J. Mirasol, “Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent,” JOURNAL OF INDUSTRIAL TEXTILES, no. 50, pp. 224–239, 2020.
LibreCat
 
[161]
2020 | Journal Article | LibreCat-ID: 24184
E. Moritzer, F. M. Mühlhoff, E. Krampe, and E. Lochbaum, “2K-Haftverbunde aus originär inkompatiblen Kunststoffen,” Plastverarbeiter, no. 07/20, pp. 20–23, 2020.
LibreCat
 
[160]
2020 | Conference Paper | LibreCat-ID: 24201
E. Moritzer, S. Kartelmeyer, and V. Hüttemann, “Additive Manufactured Heat Pipe Injection Mould Element,” presented at the Direct Digital Manufacturing Conference 2020, Berlin, 2020.
LibreCat
 
[159]
2020 | Conference Paper | LibreCat-ID: 24203
E. Moritzer and J. Hillemeyer, “Additiveteile Direktverschrauben,” presented at the 6. Fachkonferenz 3D-Druck in der Automobielindustrie, Hamburg, 2020.
LibreCat
 
[158]
2020 | Conference Paper | LibreCat-ID: 24206
E. Moritzer and J. Hillemeyer, “Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben,” presented at the 10. Gemeinschaftskolloquium, WebKolloquium (Deutschland), 2020.
LibreCat
 
[157]
2020 | Conference Paper | LibreCat-ID: 24213
E. Moritzer and M. Wittke, “CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, Digital, 2020.
LibreCat
 
[156]
2020 | Conference Paper | LibreCat-ID: 24228
E. Moritzer and D. Krassmann, “Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics,” presented at the 73rd Annual Assembly of the International Institute of Welding (IIW), Online, 2020.
LibreCat
 
[155]
2020 | Journal Article | LibreCat-ID: 24232
E. Moritzer, J. Jilg, C. Schilp, N. Krempl, and W. Friesenbichler, “Die Kunst der Entformung,” Kunststoffe, pp. 60–63, 2020.
LibreCat
 
[154]
2020 | Journal Article | LibreCat-ID: 24233
E. Moritzer, M. Hopp, and M. Wittke, “EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG,” WAK Jahreszeitschrift, pp. 2–5, 2020.
LibreCat
 
[153]
2020 | Journal Article | LibreCat-ID: 24234
E. Moritzer and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” Joining Plastics, pp. 96–103, 2020.
LibreCat
 
[152]
2020 | Conference Paper | LibreCat-ID: 24235
E. Moritzer, D. Krassmann, and J. Brikmann, “Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen,” presented at the 10. Fügetechnisches Gemeinschaftskolloquium, 2020.
LibreCat
 
[151]
2020 | Conference Paper | LibreCat-ID: 24237
E. Moritzer, S. Kartelmeyer, M. Hüttemann, and C. Jaroschek, “INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT,” presented at the 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA), 2020.
LibreCat
 
[150]
2020 | Journal Article | LibreCat-ID: 24239
E. Moritzer, F. M. Mühlhoff, E. Lochbaum, and E. Krampe, “InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen,” KGK - Rubberpoint, pp. 22–26, 2020.
LibreCat
 
[149]
2020 | Conference Paper | LibreCat-ID: 24242
E. Moritzer, A. Hirsch, and C. Dalmer, “Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability,” in Additive Manufacturing in Products and Applications (AMPA), Zurich (Switzerland), 2020, pp. 112–129.
LibreCat
 
[148]
2020 | Journal Article | LibreCat-ID: 24246
E. Moritzer, F. M. Mühlhoff, and E. Krampe, “Kostensenkung beim Mehrkomponenten-Spritzgießen,” Kunststoff + Verarbeitung, no. 5, pp. 92–93, 2020.
LibreCat
 
[147]
2020 | Journal Article | LibreCat-ID: 24248
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Mehr Materialkombinationen, weniger Kosten,” Kunststoffe, pp. 39–42, 2020.
LibreCat
 
[146]
2020 | Journal Article | LibreCat-ID: 24249
E. Moritzer and M. Wittke, “Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite,” MNWP Magazin, pp. 26–27, 2020.
LibreCat
 
[145]
2020 | Journal Article | LibreCat-ID: 24250
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “More Material Combinations, Lower Costs,” Kunststoffe international, pp. 22–25, 2020.
LibreCat
 
[144]
2020 | Conference Paper | LibreCat-ID: 24251
E. Moritzer and D. Krassmann, “Neuartige Fügetechnik für Organoblech-Hybridverbindungen,” presented at the DVS Congress 2020, Online, 2020.
LibreCat
 
[143]
2020 | Journal Article | LibreCat-ID: 24252
E. Moritzer and M. Wittke, “Neue Maßstäbe in puncto Festigkeit und Faserlänge,” Plastverarbeiter, pp. 18–21, 2020.
LibreCat
 
[142]
2020 | Journal Article | LibreCat-ID: 24253
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Plasma technology rationalizes 2-component processes,” adhesion ADHESIVES + SEALANTS, 2020.
LibreCat
 
[141]
2020 | Journal Article | LibreCat-ID: 24256
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Plasma-Technologie zur Rationalisierung von 2K-Prozessen,” adhäsion KLEBEN & DICHTEN, no. 10, pp. 16–19, 2020.
LibreCat
 
[140]
2020 | Conference (Editor) | LibreCat-ID: 24259
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neue Organoblech-Metall-Hybridfügetechnik. 2020.
LibreCat
 
[139]
2020 | Conference Paper | LibreCat-ID: 24260
E. Moritzer and C. Schumacher, “Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting,” presented at the 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien), 2020.
LibreCat
 
[138]
2020 | Conference Abstract | LibreCat-ID: 24478
E. Moritzer and J. Wächter, “From filament production to material qualification for the FDM process,” presented at the Seminar(Thermofisher): Polymer Compounds for 3D filaments – production, quality control and application, Karlsruhe, 2020.
LibreCat
 
[137]
2020 | Conference (Editor) | LibreCat-ID: 25768
E. Moritzer and D. Krassmann, Eds., Neuartige Fügetechnik für Organoblech-Hybridverbindungen. 2020.
LibreCat
 
[136]
2020 | Conference (Editor) | LibreCat-ID: 25779
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neue Organoblech-Metall-Hybridfügetechnik. 2020.
LibreCat
 
[135]
2020 | Journal Article | LibreCat-ID: 35328
M. Wortmann et al., “The Deterioration Mechanism of Silicone Molds in Polyurethane Vacuum Casting,” ACS Applied Polymer Materials, vol. 2, no. 11, pp. 4719–4732, 2020, doi: 10.1021/acsapm.0c00744.
LibreCat | DOI
 
[134]
2020 | Conference Paper | LibreCat-ID: 24247
E. Moritzer and J. Hillemeyer, “Material Specific Predicting of the Optimal Joining Parameters for the Screw Blind Rivet Joining Process,” presented at the 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference, 2020.
LibreCat
 
[133]
2020 | Journal Article | LibreCat-ID: 25901 | OA
M. Wortmann et al., “Chemical and Morphological Transition of Poly(acrylonitrile)/Poly(vinylidene Fluoride) Blend Nanofibers during Oxidative Stabilization and Incipient Carbonization,” Nanomaterials, Art. no. 1210, 2020, doi: 10.3390/nano10061210.
LibreCat | DOI | Download (ext.)
 
[132]
2020 | Book Chapter | LibreCat-ID: 24479
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “The Influence of Hydrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics and its Non-Destructive Characterization,” in Advances in Polymer Processing 2020, Berlin, Heidelberg, 2020.
LibreCat | DOI
 
[131]
2019 | Conference (Editor) | LibreCat-ID: 25580
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. 2019.
LibreCat
 
[130]
2019 | Conference Paper | LibreCat-ID: 25582
E. Moritzer and D. Krassmann, “Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, 2019.
LibreCat
 
[129]
2019 | Conference (Editor) | LibreCat-ID: 25583
E. Moritzer and D. Krassmann, Eds., Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. 2019.
LibreCat
 
[128]
2019 | Journal Article | LibreCat-ID: 25608
E. Moritzer et al., “New Polymers for Needleless Electrospinning from Low-Toxic Solvents,” NANOMATERIALS, no. 9, Art. no. 52, 2019.
LibreCat
 
[127]
2019 | Journal Article | LibreCat-ID: 25610
E. Moritzer et al., “Advanced output of silicone molds in vacuum casting processes by polyamide 12 powder supplementation,” POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, no. 58, pp. 1937–1943, 2019.
LibreCat
 
[126]
2019 | Conference Paper | LibreCat-ID: 25611
E. Moritzer, M. Hüttner, M. Henning, M. Webesen, and F. Woitschek, “Akustische Charakterisierung der mechanischen Eigenschaften künstlich gealterter Polymere,” in 45. Deutsche Jahrestagung für Akustik - DAGA, Rostock (Deutschland), 2019, pp. 505–508.
LibreCat
 
[125]
2019 | Conference Paper | LibreCat-ID: 25613
E. Moritzer and T. Westhues, “Analyse von Wirrmattenstrukturen hinsichtlich der Substitutionsfähigkeit von Schaumstoffen in Polstern und Matratzen,” in 26. Fachtagung über die Verarbeitung und Anwendung von Polymere, Chemnitz (Deutschland), 2019, p. S. 74.
LibreCat
 
[124]
2019 | Conference Paper | LibreCat-ID: 25621
E. Moritzer and A. Hirsch, “Charakterisierung des Arburg Kunststoff Freiformens,” presented at the ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design und Fertigung, Lennestadt (Deutschland), 2019.
LibreCat
 
[123]
2019 | Conference Paper | LibreCat-ID: 25624
E. Moritzer and J. Jilg, “Determining the degree of agglomeration of solid additives while using inline injection molding compounding (IIMC),” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[122]
2019 | Conference Paper | LibreCat-ID: 25626
E. Moritzer and J. Hillemeyer, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
 
[121]
2019 | Conference Paper | LibreCat-ID: 25630
E. Moritzer and J. Hillemeyer, “Experimental Determination of Reduction Factors for Dimensioning the Shear Tensil Strength of the Screw Blind Riveting,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[120]
2019 | Journal Article | LibreCat-ID: 25631
E. Moritzer and J. Hillemeyer, “Experimental Investigations Into the Dimensioning of the Static Pull-Out Strength of the Screw Blind Rivet,” Joining Plastics, pp. 40–46, 2019.
LibreCat
 
[119]
2019 | Journal Article | LibreCat-ID: 25635
E. Moritzer, M. Wortmann, N. Frese, L. Hes, A. Golzhauser, and A. Ehrmann, “Improved abrasion resistance of textile fabrics due to polymer coatings,” JOURNAL OF INDUSTRIAL TEXTILES, no. 49, pp. 572–583, 2019.
LibreCat
 
[118]
2019 | Conference Paper | LibreCat-ID: 25636
E. Moritzer, D. Netzband, and A. Ujma, “Influences on structural intensity for injection mouldet thermoplastic parts,” presented at the 23rd International Congress on Acoustics, Aachen (Deutschland), 2019.
LibreCat
 
[117]
2019 | Journal Article | LibreCat-ID: 25637
E. Moritzer, F. M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, and S. Asad, “Inline-Oberflächenaktivierung mittels Plasma für das 2K-Spritzgießen,” Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik, pp. 54–59, 2019.
LibreCat
 
[116]
2019 | Conference Paper | LibreCat-ID: 25638
E. Moritzer, F. M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, and S. Asad, “InMould-Plasma,” presented at the Eröffnung Plasma-Campus bei Plasmatreat GmbH, Steinhagen (Deutschland), 2019.
LibreCat
 
[115]
2019 | Journal Article | LibreCat-ID: 25639
E. Moritzer, J. Jilg, and N. Sibbe, “Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU),” PU MAGAZIN - International, pp. 320–324, 2019.
LibreCat
 
[114]
2019 | Journal Article | LibreCat-ID: 25640
E. Moritzer, J. Jilg, and N. Sibbe, “Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU),” TPE Magazine international, no. 4, pp. 230–234, 2019.
LibreCat
 
[113]
2019 | Conference Paper | LibreCat-ID: 25689
E. Moritzer, M. Hüttner, D. Krassmann, and M. Wittke, “Lebensdauer von Composites und Composite-Metall-Hybridverbindungen,” presented at the Werkstoffwoche, Dresden (Deutschland), 2019.
LibreCat
 
[112]
2019 | Conference Paper | LibreCat-ID: 25738
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
 
[111]
2019 | Conference Paper | LibreCat-ID: 25745
E. Moritzer and A. Hirsch, “Oberflächennachbearbeitung und Kleben von FDM-Bauteilen,” presented at the DGM-Seminar für Fortgeschrittene, Paderborn (Deutschland), 2019.
LibreCat
 
[110]
2019 | Conference Paper | LibreCat-ID: 25747
E. Moritzer and T. Westhues, “Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer,” presented at the 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
 
[109]
2019 | Journal Article | LibreCat-ID: 25748
E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, pp. 867–873, 2019.
LibreCat
 
[108]
2019 | Conference Paper | LibreCat-ID: 25755
E. Moritzer and M. Wittke, “Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[107]
2019 | Conference Paper | LibreCat-ID: 25756
E. Moritzer, S. Kartelmeyer, B. Hüttemann, and C. Jaroschek, “Spritzgießwerkzeuge mit Heatpipe-Temperierung,” presented at the 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
 
[106]
2019 | Journal Article | LibreCat-ID: 25757
E. Moritzer, J. Jilg, and N. Sibbe, “Untersuchung der Verbundhaftung zwischen spritzgegossenen TPUs und einer reaktiven, gießfähigen Polyurethanmasse,” PU MAGAZIN, pp. 220–224, 2019.
LibreCat
 
[105]
2019 | Conference Paper | LibreCat-ID: 25760
E. Moritzer and J. Jilg, “Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC),” presented at the 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
 
[104]
2019 | Journal Article | LibreCat-ID: 23844
F. I. Bürenhaus, E. Moritzer, and A. Hirsch, “Adhesive bonding of FDM-manufactured parts made of ULTEM 9085 considering surface treatment, surface structure, and joint design,” Welding in the World, pp. 1819–1832, 2019.
LibreCat | DOI
 
[103]
2019 | Newspaper Article | LibreCat-ID: 23845
E. Moritzer, F. I. Bürenhaus, and A. Hirsch, “Advancing into New Dimensions,” Kunststoffe internationl, vol. 109, no. 2, pp. 48–52, 2019.
LibreCat | PubMed | Europe PMC
 
[102]
2019 | Newspaper Article | LibreCat-ID: 23850
E. Moritzer, F. I. Bürenhaus, and A. Hirsch, “Vorstoß in neue Dimensionen,” Kunststoffe, vol. 109, no. 2, pp. 68–72, 2019.
LibreCat
 
[101]
2019 | Conference Paper | LibreCat-ID: 22022
E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat | DOI
 
[100]
2019 | Journal Article | LibreCat-ID: 22047
E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, vol. 63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.
LibreCat | DOI
 
[99]
2019 | Conference Paper | LibreCat-ID: 22028
E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi: 10.1063/1.5088314.
LibreCat | DOI
 
[98]
2019 | Book | LibreCat-ID: 22026
E. Moritzer, A. Hirsch, and S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung. Springer Vieweg, 2019, pp. 185–198.
LibreCat | DOI
 
[97]
2019 | Conference Paper | LibreCat-ID: 22041
E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.
LibreCat | DOI
 
[96]
2018 | Conference Paper | LibreCat-ID: 25784
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn, 2018.
LibreCat
 
[95]
2018 | Conference Paper | LibreCat-ID: 25785
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn, 2018.
LibreCat
 
[94]
2018 | Conference (Editor) | LibreCat-ID: 25787
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen. 2018.
LibreCat
 
[93]
2018 | Conference (Editor) | LibreCat-ID: 25788
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen. 2018.
LibreCat
 
[92]
2018 | Conference Paper | LibreCat-ID: 25790
E. Moritzer, C. Budde, and D. Krassmann, “ Neue Methoden zum Fügen von Organoblechen,” presented at the Fügen von Kunststoffen im Automobil 2018, Landshut, 2018.
LibreCat
 
[91]
2018 | Conference Paper | LibreCat-ID: 26937
E. Moritzer and A. Hirsch, “Charakterisierung des Arburg Kunststoff Freiformens,” presented at the WAK-Symposium, Bayreuth (Deutschland), 2018.
LibreCat
 
[90]
2018 | Conference Paper | LibreCat-ID: 26938
E. Moritzer, A. Hirsch, and S. Paulus, “Dauerschwinguntersuchungen an FDM-Verstärkungsstrukturen,” presented at the 3. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin (Deutschland), 2018.
LibreCat
 
[89]
2018 | Journal Article | LibreCat-ID: 26939
E. Moritzer, J. Jilg, Y. Martin, and E. Müller, “Die effiziente Materialentwicklung mittels Spritzgießdirektcompoundierung (SGDC),” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 14. Jg. Heft 1, pp. 1–34, 2018.
LibreCat
 
[88]
2018 | Journal Article | LibreCat-ID: 26941
E. Moritzer and T. Nordmeyer, “Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints,” Welding in the World, vol. 62. Jg. Heft 3, pp. 601–608, 2018.
LibreCat
 
[87]
2018 | Journal Article | LibreCat-ID: 26942
E. Moritzer and T. Nordmeyer, “Einfluss der Oberflächenaktivierung mittels der Direktinjektion- und der Atmosphärendruck-Plasmabehandlung für das Kleben von Kunststoffen,” Joining Plastics, vol. 12. Jg. Heft 2, 2018.
LibreCat
 
[86]
2018 | Journal Article | LibreCat-ID: 26946
E. Moritzer et al., “Examination of Interpenetrating Polymer Networks of Polyurea in Silicone Molds Arising During Vacuum Castin Processes,” Polymer-Plastics Technology and Engineering, vol. 57. Jg. Heft 15, pp. 1524–1529, 2018.
LibreCat
 
[85]
2018 | Journal Article | LibreCat-ID: 26948
E. Moritzer, J. Jilg, A. Neunhäuserer, and W. Friesenbichler, “Glasfaseragglomerate im Visier - eine Zerreißprobe,” Kunststoffe, vol. 108. Jg., no. Heft 7, pp. 48–52, 2018.
LibreCat
 
[84]
2018 | Conference Paper | LibreCat-ID: 26949
E. Moritzer and B. Landgräber, “Inflation Behavior of Preforms in the Special Injection Molding Process GITBlow Combining Gas Assisted Injection Molding and Blow Molding,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
 
[83]
2018 | Conference Paper | LibreCat-ID: 26951
E. Moritzer, T. Nordmeyer, B. Böhnke, A. Marinkovic, G. Hoffmann, and S. S. Asad, “Inline-Oberflächenvorbehandlung durch Direktinjektion-Plasma - Neue Möglichkeiten für das Mehrkomponentenspritzgießen,” presented at the 17. EWIKON Heißkanal-Forum, Frankenberg (Deutschland), 2018.
LibreCat
 
[82]
2018 | Conference Paper | LibreCat-ID: 26953
E. Moritzer and G. Heiderich, “Investigation on the Fiber Compounding with a New Type of Compounding Machine,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
 
[81]
2018 | Conference Paper | LibreCat-ID: 26961
E. Moritzer, C. Budde, and D. Krassmann, “Neue Methoden zum Fügen von Organoblechen,” presented at the Fügen von Kunststoffen im Automobil 2018, Landshut (Deutschland), 2018.
LibreCat
 
[80]
2018 | Conference Paper | LibreCat-ID: 26963
E. Moritzer, G. Heiderich, and M. Wittke, “Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
 
[79]
2018 | Conference Paper | LibreCat-ID: 26969
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
 
[78]
2018 | Conference Paper | LibreCat-ID: 26970
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
 
[77]
2018 | Journal Article | LibreCat-ID: 26971
E. Moritzer and M. Wittke, “Synergies from the Screw,” Kunststoffe International, no. 12/2018, pp. 34–37, 2018.
LibreCat
 
[76]
2018 | Journal Article | LibreCat-ID: 26972
E. Moritzer and M. Wittke, “Syngerien aus der Schnecke,” Kunststoffe, no. 12/2018, pp. 69–72, 2018.
LibreCat
 
[75]
2018 | Conference Paper | LibreCat-ID: 26974
E. Moritzer and T. Nordmeyer, “System Integration of the Direct Injection Plasma Treatment for Injection Molding for Subsequent Assembly Processes,” presented at the Joining in Car Body Engineering 2018, Bad Nauheim (Deutschland), 2018.
LibreCat
 
[74]
2018 | Conference Paper | LibreCat-ID: 26975
E. Moritzer, A. Hirsch, M. Hüttner, and J. Wächter, “The Influence of Environmental Aging on the Material Properties of Back-Molded Composite Sheets,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
 
[73]
2018 | Conference Paper | LibreCat-ID: 26977
E. Moritzer and M. Hüttner, “The Influence of Hygrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
 
[72]
2018 | Book Chapter | LibreCat-ID: 26979
E. Moritzer and B. Landgräber, “Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen,” in Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen, 1st ed., Bielefeld, 2018, pp. 127–140.
LibreCat
 
[71]
2017 | Conference Paper | LibreCat-ID: 25578
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, 2017.
LibreCat
 
[70]
2017 | Conference Paper | LibreCat-ID: 24529
E. Moritzer and M. Hopp, “Bonding of Plastic Parts with Dispersion Adhesives – Film Formation via Diffusion Processes,” 2017.
LibreCat
 
[69]
2017 | Conference (Editor) | LibreCat-ID: 25739
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen. 2017.
LibreCat
 
[68]
2017 | Conference Paper | LibreCat-ID: 27200
E. Moritzer and T. Westhues, “Ansatz zur Beschreibung von unregelmäßig gefügten Kunststofffilamenten in Wirrmattenstrukturen unter mechanischer Belastung,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[67]
2017 | Conference Paper | LibreCat-ID: 27203
E. Moritzer and B. Landgräber, “Comparison of the Processing Properties of Thermoplastics Elastomers and Thermoplastics Using Gas Assisted Injection Molding,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[66]
2017 | Conference Paper | LibreCat-ID: 27204
E. Moritzer, C. Budde, and M. Hüttner, “Das Spritznieten von Organoblechen als neuartiges Fügeverfahren zur Herstellung von Composite-Metall-Hybridverbindungen,” presented at the Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
 
[65]
2017 | Conference Paper | LibreCat-ID: 27206
E. Moritzer and T. Nordmeyer, “Development of an Inline Plasma Treatment during Injection Molding Process for High Adhesive Strengths,” presented at the 12th SPE Annual Automotive Engineering Plastics Conference (AutoEPCON), Detroit (USA), 2017.
LibreCat
 
[64]
2017 | Conference Paper | LibreCat-ID: 27209
E. Moritzer and T. Nordmeyer, “Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[63]
2017 | Conference Paper | LibreCat-ID: 27212
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, Dresden (Deutschland), 2017.
LibreCat
 
[62]
2017 | Conference Paper | LibreCat-ID: 27215
E. Moritzer, G. Heiderich, and A. Hirsch, “Fiber Length Reduction during Injection Molding,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[61]
2017 | Journal Article | LibreCat-ID: 27218
E. Moritzer, T. Nordmeyer, and M. Häußler, “Inline Surface Activation in the Injection Molding Process for High Adhesive Strength,” adhesion ADHESIVES & SEALANTS, no. 14. Jg. Heft 4, 2017.
LibreCat
 
[60]
2017 | Journal Article | LibreCat-ID: 27219
E. Moritzer, T. Nordmeyer, and M. Häußler, “Inline-Oberflächenaktivierung im Spritzgießprozess für hohe Klebfestigkeiten,” Adhäsion, no. 61. Jg. Heft 10, pp. 46–51, 2017.
LibreCat
 
[59]
2017 | Conference Paper | LibreCat-ID: 27223
E. Moritzer and B. Landgräber, “Investigations on the Production of Hybrid Structures Using the Two-Stage GITBlow-Process,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[58]
2017 | Journal Article | LibreCat-ID: 27224
E. Moritzer, J. Krugmann, and C. Leister, “Alterung von plasmabehandelten Kunststoffen – Alles eine Frage der Zeit?,” Kunststoffe erfolgreich kleben, no. 1, pp. 81–86, 2017.
LibreCat
 
[57]
2017 | Journal Article | LibreCat-ID: 27225
E. Moritzer, N. Friedrich, and J. Berger, “Laserdurchstrahlkleben von opaken Kunststoffen – Schnell und zuverlässig. ,” Kunststoffe erfolgreich kleben, no. 1, pp. 213–221, 2017.
LibreCat
 
[56]
2017 | Conference Paper | LibreCat-ID: 27229
E. Moritzer, B. Landgräber, and Y. Martin, “Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[55]
2017 | Conference Paper | LibreCat-ID: 27230
E. Moritzer, B. Landgräber, and Y. Martin, “Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process,” presented at the 17th Annual International Polymer Colloquium (IPC), Madison (USA), 2017.
LibreCat
 
[54]
2017 | Journal Article | LibreCat-ID: 27243
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, no. 8. Jg. Heft 8, p. 246, 2017.
LibreCat
 
[53]
2017 | Journal Article | LibreCat-ID: 27244
E. Moritzer et al., “Untersuchung der Alterungsmechanismen von Silikon-Gießwerkzeugen beim Vakuumgießen,” Ingenieurspiegel - Fachmagazin für Ingenieure, no. 5. Jg. Heft 3, pp. 52–54, 2017.
LibreCat
 
[52]
2017 | Journal Article | LibreCat-ID: 22038
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, vol. 8, no. 246, 2017, doi: 10.3390/mi8080246.
LibreCat | DOI
 
[51]
2016 | Conference Paper | LibreCat-ID: 27246
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “An Approach to Non-Destructive Testing of Aged Polymers,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[50]
2016 | Journal Article | LibreCat-ID: 27250
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Detecting Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers,” Kunststoffe international, no. 10. Jg. Heft 4, pp. 43–45, 2016.
LibreCat
 
[49]
2016 | Conference Paper | LibreCat-ID: 27251
E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, and C. Buske, “Development of an Inline Plasma Treatment During Injection Molding Process,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[48]
2016 | Conference Paper | LibreCat-ID: 27252
E. Moritzer, C. Budde, and M. Hüttner, “Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints,” presented at the Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
LibreCat
 
[47]
2016 | Conference Paper | LibreCat-ID: 27253
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren,” presented at the Safe and Reliable Structures, Dalheim (Deutschland), 2016.
LibreCat
 
[46]
2016 | Conference Paper | LibreCat-ID: 27254
E. Moritzer and Y. Martin, “Experimental Investigations on the Fibre Length Degradation in Injection Moulds,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[45]
2016 | Conference Paper | LibreCat-ID: 27255
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[44]
2016 | Conference Paper | LibreCat-ID: 27256
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
LibreCat
 
[43]
2016 | Conference Paper | LibreCat-ID: 27257
E. Moritzer and G. Heiderich, “Fiber Length Reduction during Shearing in Polymer Processing,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[42]
2016 | Journal Article | LibreCat-ID: 27259
E. Moritzer, R. Kleeschulte, S. Zavoral, and E. Kaiser, “Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie,” Kunststoffe, no. 106. Jg. Heft 2, pp. 54–58, 2016.
LibreCat
 
[41]
2016 | Journal Article | LibreCat-ID: 27260
E. Moritzer et al., “In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern,” Kunststoffe, no. 106. Jg. Heft 8, pp. 70–72, 2016.
LibreCat
 
[40]
2016 | Journal Article | LibreCat-ID: 27264
E. Moritzer, Y. Martin, and E. Müller, “Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess,” Kunststofftechnik - Spritzgießen 2016, no. 1, pp. 27–39, 2016.
LibreCat
 
[39]
2016 | Journal Article | LibreCat-ID: 27267
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Molekularen Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in gealterten Polymeren,” Kunststoffe, no. 106. Jg. Heft 6, pp. 94–96, 2016.
LibreCat
 
[38]
2016 | Conference Paper | LibreCat-ID: 27269
E. Moritzer, C. Budde, and M. Hüttner, “Organoblechnieten,” presented at the 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
LibreCat
 
[37]
2016 | Journal Article | LibreCat-ID: 27271
E. Moritzer, V. Schöppner, P. Lakemeyer, and T. Nordmeyer, “Plasmaunterstütztes Fügen von Kunststoffen,” Joining Plastics, no. 10. Jg. Heft 2, pp. 100–108, 2016.
LibreCat
 
[36]
2016 | Conference Paper | LibreCat-ID: 27276
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, and M. Webersen, “The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
 
[35]
2016 | Journal Article | LibreCat-ID: 27278
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ultraschallbasierte Charakterisierung von gealterten Polymeren,” Jahresmagazin Kunststofftechnik, pp. 98–103, 2016.
LibreCat
 
[34]
2016 | Conference Paper | LibreCat-ID: 27279
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren,” presented at the 18. GMA/ITG Fachtagung Sensoren und Messsysteme, Nürnberg (Deutschland), 2016.
LibreCat
 
[33]
2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
 
[32]
2015 | Conference Paper | LibreCat-ID: 24530
E. Moritzer and M. Hopp, “Bonding of Wood Plastic Composites (WPC) - Material and Surface Modification for Special Applications,” 2015.
LibreCat
 
[31]
2015 | Newspaper Article | LibreCat-ID: 27292
E. Moritzer, C. Budde, and M. Hüttner, “Wie Kurz- und Endlosfasern sich am besten vertragen,” Kunststoffe, vol. 105, no. 3, 2015.
LibreCat
 
[30]
2015 | Newspaper Article | LibreCat-ID: 27295
E. Moritzer, C. Leister, and T. Nordmeyer, “Analyse der Behandlungswirkung auf Kunststoffen durch Atmosphärendruck-Plasma,” Zeitschrift Kunststofftechnik, vol. 11, no. 4, pp. 205–226, 2015.
LibreCat
 
[29]
2015 | Conference Paper | LibreCat-ID: 27297
E. Moritzer, R. Kleeschulte, S. Pollmann, and K. Anger, “Development of a Function-Integrated Thermoplastic Foam Structure with High Mechanical Resistance and Water Impermeability as Well as Low Thermal Conductivity at the Same Time,” presented at the Europe-Africa Conference of the Polymer Processing Society, Graz (Österreich), 2015.
LibreCat
 
[28]
2015 | Conference Paper | LibreCat-ID: 27304
E. Moritzer and C. Budde, “Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (Österreich), 2015.
LibreCat
 
[27]
2015 | Conference Paper | LibreCat-ID: 27309
E. Moritzer, C. Leister, T. Nordmeyer, A. Grishin, and A. Knospe, “Investigations of the Surface Activation of Thermoplastic Polymers by Atmospheric Pressure Plasma Treatment with a Stationary Plasma Jet,” presented at the 31st International Conference of Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[26]
2015 | Conference Paper | LibreCat-ID: 27312
E. Moritzer and C. Budde, “Leichtbau mit hybriden Werkstoffen - Konstruktion eines innovativen Vorderachsträgers,” presented at the DVS Congress, Nürnberg (Deutschland), 2015.
LibreCat
 
[25]
2015 | Conference Paper | LibreCat-ID: 27313
E. Moritzer and G. Heiderich, “Mechanical Recycling of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[24]
2015 | Newspaper Article | LibreCat-ID: 27317
E. Moritzer and S. Seidel, “Numerical Analysis and Evaluation of Process and Geometry Specific Transient Temperature Fields for a New Variation of Gas-Assisted Injection Molding,” International Polymer Processing, vol. 30, no. 2, pp. 265–275, 2015.
LibreCat
 
[23]
2015 | Newspaper Article | LibreCat-ID: 27326
E. Moritzer, J. Leßmann, T. Plugge, and S. Seidel, “Two-Stage-GITBlow - Modellbildung, Simulation und Optimierung der Wanddickenhomogenität,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 11, no. 2, pp. 69–102, 2015.
LibreCat
 
[22]
2015 | Conference Paper | LibreCat-ID: 27327
E. Moritzer, Y. Martin, S. Yatsenko, P. Heidemeyer, and M. Bastian, “Wood Polymer Composites (WPC) als Kernmaterial im Sandwichspritzgießen,” presented at the 24. Fachtagung Technomer, Chemnitz (Deutschland), 2015.
LibreCat
 
[21]
2014 | Conference Paper | LibreCat-ID: 24532
E. Moritzer and M. Hopp, “The setting behavior of dispersion adhesives during bonding of Wood Plastic Composites (WPC),” 2014.
LibreCat
 
[20]
2014 | Newspaper Article | LibreCat-ID: 27328
E. Moritzer, C. Budde, and C. Leister, “Affect of Atmospheric Pressure Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics,” Welding in the World, vol. 58, 2014.
LibreCat
 
[19]
2014 | Conference Paper | LibreCat-ID: 27330
E. Moritzer, Y. Martin, E. Müller, and R. Kleeschulte, “Artificial Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding on an Injection Moulding Machine,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[18]
2014 | Conference Paper | LibreCat-ID: 27333
E. Moritzer and S. Seidel, “Control of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage GITBlow Process,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[17]
2014 | Conference Paper | LibreCat-ID: 27335
E. Moritzer, “Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow,” presented at the WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
 
[16]
2014 | Newspaper Article | LibreCat-ID: 27336
E. Moritzer and J. Krugmann, “Entwicklung einer neuen mechanischen Befestigungslösung mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt,” Joining Plastics, vol. 8, no. 3, pp. 178–182, 2014.
LibreCat
 
[15]
2014 | Conference Paper | LibreCat-ID: 27339
E. Moritzer and G. Heiderich, “Experimental Investigations of the Mechanical Recycling of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets by Injection Molding,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[14]
2014 | Conference Paper | LibreCat-ID: 27340
E. Moritzer and G. Heiderich, “Experimental Investigations on Injection Molded Parts of Mechanically Recycled Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat
 
[13]
2014 | Conference Paper | LibreCat-ID: 27343
E. Moritzer and C. Budde, “Hybrid Lightweight Construction of a Chassis Frame Structure,” presented at the Polymers and Energy, Jena (Deutschland), 2014.
LibreCat
 
[12]
2014 | Newspaper Article | LibreCat-ID: 27345
E. Moritzer, S. Seidel, S. Gövert, and J. Schnieders, “Im geschlossenen Werkzeug aufgeblasen,” Kunststoffe, vol. 104, no. 5, 2014.
LibreCat
 
[11]
2014 | Conference Paper | LibreCat-ID: 27347
E. Moritzer and S. Seidel, “Influence of Process Parameters on Wall Thickness Distribution During the Initial Step of the Direct GITBlow Process,” presented at the 30th International Conference of The Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[10]
2014 | Conference Paper | LibreCat-ID: 27350
E. Moritzer and J. Krugmann, “Molded-On Mechanical Fastener Ensures Uniform Force Transmission and Sealing of the Joint Surface: Joining Parts Together with the Aid of Self-Tapping Screws,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[9]
2014 | Newspaper Article | LibreCat-ID: 27351
E. Moritzer and R. Kleeschulte, “Nicht nur gleich und gleich gesellt sich gern,” Kunststoffe, vol. 104, no. 8, pp. 50–53, 2014.
LibreCat
 
[8]
2014 | Conference Paper | LibreCat-ID: 27352
E. Moritzer and J. Krugmann, “Nutzung der Materialdeformation zur Entwicklung eines neuartigen Kunststoffblindniets,” presented at the PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
 
[7]
2014 | Newspaper Article | LibreCat-ID: 27355
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics, vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
 
[6]
2014 | Conference Paper | LibreCat-ID: 27358
E. Moritzer and C. Budde, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[5]
2014 | Conference Paper | LibreCat-ID: 27359
E. Moritzer and C. Budde, “Study of the Bond Strength of a Combination Consisting of Polypropylene Composite Sheet and Short-Fiber Thermoplastic,” presented at the Euro Hybrid Materials and Systems 2014 (EHMS), Stade (Deutschland), 2014.
LibreCat
 
[4]
2014 | Newspaper Article | LibreCat-ID: 27362
E. Moritzer and G. Heiderich, “Vom Reststoff zum hochtechnischen Spritzgießkunststoff - Recyclingtechnologie für thermoplastische endlosfaserverstärkte Kunststoffe,” Ingenieurspiegel - Fachmagazin für Ingenieure, vol. 1, no. 3, pp. 50–52, 2014.
LibreCat
 
[3]
2014 | Conference Paper | LibreCat-ID: 16098
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” Stade, 2014, pp. 101–108.
LibreCat
 
[2]
2014 | Journal Article | LibreCat-ID: 16125
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics , vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
 
[1]
2012 | Journal Article | LibreCat-ID: 26132
N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, and H.-J. Schmid, “Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess,” Chemie Ingenieur Technik, pp. 1584–1589, 2012, doi: 10.1002/cite.201100223.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

245 Publications

Mark all

[245]
2024 | Conference Paper | LibreCat-ID: 53529
E. Moritzer and C. L. Elsner, “Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2024), St. Louis, 2024.
LibreCat
 
[244]
2023 | Conference Paper | LibreCat-ID: 48663
E. Moritzer and C. Held, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” Essen (Deutschland), 2023.
LibreCat
 
[243]
2023 | Conference Paper | LibreCat-ID: 48752
E. Moritzer and M. Scholle, “The main factors influencing glass fiber shortening in the processing of bulk molding compounds (BMC),” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
 
[242]
2023 | Conference Paper | LibreCat-ID: 48755
E. Moritzer and C. Held, “Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.
LibreCat
 
[241]
2023 | Conference Paper | LibreCat-ID: 48739
E. Moritzer, C. L. Elsner, and K. Deupmann, “Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
 
[240]
2023 | Journal Article | LibreCat-ID: 48734
E. Moritzer, F. M. Mühlhoff, D. Rauen, B. Kolbe, H. Schlee, and C. Hokamp, “Großflächig, komplex? InMould-Plasma ist die Lösung!,” Kunststoffe, 2023.
LibreCat
 
[239]
2023 | Journal Article | LibreCat-ID: 48733
E. Moritzer, S. Kartelmeyer, D. Kreamer, and C. Jaroschek, “Goodbye Hot Spots - with No Extra Energy Expenditure,” Plastics Insights, no. 7/2023, pp. 38–41, 2023.
LibreCat
 
[238]
2023 | Journal Article | LibreCat-ID: 48736
E. Moritzer, S. Kartelmeyer, D. Kraemer, and C. Jaroschek, “Hotspots ade - ohne Extra-Energieaufwand,” Kunststoffe, no. 5/2023, pp. 64–66, 2023.
LibreCat
 
[237]
2023 | Conference Paper | LibreCat-ID: 48747
E. Moritzer and C. Held, “Optimization of additively manufactured parts for direct screwing,” presented at the 76th Annual Assembly and International Conference of the international Institute of Welding (IIW), Singapur (Singapur), 2023.
LibreCat
 
[236]
2023 | Journal Article | LibreCat-ID: 48741
E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Konturnah kühlen für wenig Geld,” Kunststoffe, no. 8/2023, pp. 56–59, 2023.
LibreCat
 
[235]
2023 | Conference Paper | LibreCat-ID: 49742
F. I. Bürenhaus and E. Moritzer, “Influence of fiber geometry and sizing on glass fiber breakage,” 2023, doi: 10.1063/5.0135843.
LibreCat | DOI
 
[234]
2023 | Journal Article | LibreCat-ID: 48277 | OA
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat | DOI | Download (ext.)
 
[233]
2023 | Conference Paper | LibreCat-ID: 48357
E. Moritzer, F. Hecker, F. Knaup, and J. Wächter, “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process,” in Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), Fukuoka (Japan), 2023, pp. 170001-1-170001–5, doi: 10.1063/5.0168548.
LibreCat | DOI
 
[232]
2023 | Journal Article | LibreCat-ID: 52802
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat | DOI
 
[231]
2023 | Journal Article | LibreCat-ID: 48657
E. Moritzer, L. Tölle, C. Greb, and M. Haag, “Conceptions and Feasibility Study of Fiber Orientation in the Melt as Part of a Completely Circular Recycling Concept for Fiber-Reinforced Thermoplastics,” Journal of Composites Science, no. 7, p. 267, 2023, doi: 10.3390/jcs7070267.
LibreCat | DOI
 
[230]
2023 | Journal Article | LibreCat-ID: 48654
E. Moritzer and C. Held, “Characterization of additively manufactured parts for direct screwing,” Welding in the World, 2023, doi: 10.1007/s40194-023-01610-7.
LibreCat | DOI
 
[229]
2023 | Journal Article | LibreCat-ID: 52837
E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Conformal Cooling at Low Cost,” Plastics Insights, no. 8/2023, pp. 44–48, 2023.
LibreCat
 
[228]
2023 | Journal Article | LibreCat-ID: 42515 | OA
E. Moritzer and F. Flachmann, “Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures,” Journal of Cellular Plastics, vol. 59, no. 3, pp. 187–199, 2023, doi: 10.1177/0021955x231161175.
LibreCat | DOI | Download (ext.)
 
[227]
2022 | Report | LibreCat-ID: 34724
E. Moritzer and M. Scholle, BMC-Spritzgießen bricht die Glasfaser. 2022.
LibreCat
 
[226]
2022 | Newspaper Article | LibreCat-ID: 34732
E. Moritzer, M. Scholle, L. Tölle, and J. Bomm, “Influence of process parameter on fiber quality during fiber recycling through thermal fiber recovery,” RFP Rubber Fibres Plastics, 2022.
LibreCat
 
[225]
2022 | Newspaper Article | LibreCat-ID: 34729
E. Moritzer, M. Scholle, L. Tölle, and J. Bomm, “Einfluss der Prozessführung auf die Faserqualität beim Faserrecycling mittels thermischer Faserrückgewinnung,” GAK - Gummi Fasern Kunststoffe, 2022.
LibreCat
 
[224]
2022 | Conference Paper | LibreCat-ID: 34731
E. Moritzer and M. Richters, “Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
 
[223]
2022 | Report | LibreCat-ID: 34741
E. Moritzer, M. Kröker, and M. Scholle, Rückführung zerkleinerter Organobleche. 2022.
LibreCat
 
[222]
2022 | Conference Paper | LibreCat-ID: 34725
E. Moritzer and C. Held, “Characterization of additively manufactured plastic components for direct screwing,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2022.
LibreCat
 
[221]
2022 | Newspaper Article | LibreCat-ID: 33291
E. Moritzer and D. Rauen, “Plasmaaktivierung fehlgeschlagen!,” Kunststoffe, pp. 79–81, 2022.
LibreCat
 
[220]
2022 | Report | LibreCat-ID: 33070
A. Fuhrmann et al., Verbessertes Füllverhalten im Spritzgießprozess durch Schäumen von WPC: Bewertung des Fließverhaltens treibmittelbeladener Polymerschmelzen. Shaker, 2022.
LibreCat
 
[219]
2022 | Conference Paper | LibreCat-ID: 33288
E. Moritzer and F. I. Bürenhaus, “Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka (Japan), 2022.
LibreCat
 
[218]
2022 | Conference Paper | LibreCat-ID: 33290
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Multimaterial Injection Moulding of Thermosets and Elastomers,” presented at the ScienceBG, Burgas (Bulgaria), 2022.
LibreCat
 
[217]
2022 | Newspaper Article | LibreCat-ID: 33292
E. Moritzer, D. Scheiermann, D. Bellusova, B. Klie, and U. Giese, “Spritzgießen hochtemperaturbeständiger Baugruppen aus Duromeren und Elastomeren,” Kunststoffland NRW, pp. 34–35, 2022.
LibreCat
 
[216]
2022 | Conference Paper | LibreCat-ID: 33296
E. Moritzer, D. Netzband, and A. Ujma, “Messtechnische Ermittlung der Strukurintensität bei spritzgegossenen, faserverstärkten Kunststoffen,” 2022.
LibreCat
 
[215]
2022 | Journal Article | LibreCat-ID: 33859
E. Moritzer and C. L. Elsner, “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100390.
LibreCat | DOI
 
[214]
2022 | Journal Article | LibreCat-ID: 33861
E. Moritzer and J. Wächter, “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100389.
LibreCat | DOI
 
[213]
2022 | Newspaper Article | LibreCat-ID: 33987
E. Moritzer and C. L. Elsner, “Mit Gestaltungsrichtlinien zum Erfolg,” Kunststoffe, vol. 11/2022, 2022.
LibreCat
 
[212]
2022 | Newspaper Article | LibreCat-ID: 33287
E. Moritzer, C. Held, and J. Hillemeyer, “Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS,” Joining Plastic, pp. 84–90, 2022.
LibreCat
 
[211]
2022 | Newspaper Article | LibreCat-ID: 33289
E. Moritzer, C. Held, C. Hopmann, and M. Kramer, “Mit der richtigen Auslegung zur sicheren Verbindung,” Kunststoffe, pp. 30–33, 2022.
LibreCat
 
[210]
2022 | Newspaper Article | LibreCat-ID: 34728
E. Moritzer, D. Rauen, C. Schilp, and M. Scholle, “Die Vielseitigkeit von Beschichtungen im Spritzgießwerkzeug- und Formenbau,” Zeitschrift Kunststofftechnik, 2022.
LibreCat
 
[209]
2022 | Journal Article | LibreCat-ID: 33862
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.
LibreCat | DOI
 
[208]
2022 | Conference Paper | LibreCat-ID: 48354
E. Moritzer and J. Wächter, “Qualification of Different Carbon Fiber Reinforced Polyether Ether Ketone Materials for the FFF Process,” presented at the 37th International Conference of the Polymer Processing Society, Fukuoka (Japan), 2022.
LibreCat
 
[207]
2022 | Conference Paper | LibreCat-ID: 33852 | OA
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat | DOI | Download (ext.)
 
[206]
2022 | Journal Article | LibreCat-ID: 44302
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science , 2022.
LibreCat
 
[205]
2022 | Conference Paper | LibreCat-ID: 33853 | OA
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat | DOI | Download (ext.)
 
[204]
2022 | Journal Article | LibreCat-ID: 33856 | OA
E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” Journal of Composites Science, vol. 6, no. 10, Art. no. 321, 2022, doi: 10.3390/jcs6100321.
LibreCat | DOI | Download (ext.)
 
[203]
2022 | Journal Article | LibreCat-ID: 34739
E. Moritzer, C. Held, and J. Hillemeyer, “Material-specific prediction of the optimal joinig parameters for the screw blind rivet joining process,” Welding in the World, 2022.
LibreCat
 
[202]
2021 | Conference Paper | LibreCat-ID: 25576
E. Moritzer, D. Krassmann, and J. Brikmann, “Joining of Sheet Metal and Thermoplastic Composites Using Injection Riveting,” presented at the 74th Annual Assembly of the International Institute of Welding (IIW), 2021.
LibreCat
 
[201]
2021 | Journal Article | LibreCat-ID: 25577
E. Moritzer, D. Krassmann, and J. Brikmann, “Fügen von thermoplastischen Composites mit Metallteilen durch Spritznieten,” Joining Plastics, vol. 15, no. 3–4, 2021.
LibreCat
 
[200]
2021 | Newspaper Article | LibreCat-ID: 24095 | OA
E. Moritzer, F. Hecker, and A. Hirsch, “Aus der Forschung in die Anwendung - Materialqualifizierung im Kunststoff Freiformen,” Kunststoffland NRW report, vol. 2021, no. 2, pp. 42–43, 2021.
LibreCat | Download (ext.)
 
[199]
2021 | Journal Article | LibreCat-ID: 24161
E. Moritzer and M. Kröker, “Weiterentwicklung von GITBlow für dünnwandige Hohlstrukturen auf Organoblechen,” CU reports, 2021.
LibreCat
 
[198]
2021 | Conference Paper | LibreCat-ID: 24165
E. Moritzer and M. Kröker, “Simulative analysis of the filling process in the 2K GITBlow process on organo sheets,” presented at the SPE Antec 2021, Digital, 2021.
LibreCat
 
[197]
2021 | Journal Article | LibreCat-ID: 24168
E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat
 
[196]
2021 | Newspaper Article | LibreCat-ID: 24556
E. Moritzer, F. Hecker, and A. Hirsch, “Kleine Tropfen, große Wirkung,” Kunststoffe, no. 9/2021, pp. 88–90, 2021.
LibreCat
 
[195]
2021 | Newspaper Article | LibreCat-ID: 27366
E. Moritzer and F. Hecker, “Untersuchung der mechanischen Eigenschaften, Hintergründe und weitere Entwicklungen im Kunststoff Freiformen,” Jahresmagazin Kunststofftechnik, pp. 70–75, 2021.
LibreCat | Download (ext.)
 
[194]
2021 | Conference Paper | LibreCat-ID: 23851
E. Moritzer and F. I. Bürenhaus, “Influence of Processing Parameters on Fiber Length Degradation during Injection Molding,” in SPE ANTEC 2021 Proceedings, 2021.
LibreCat
 
[193]
2021 | Conference Paper | LibreCat-ID: 25283
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming,” presented at the 36th International Conference of the Polymer Processing Society, Montreal, Canada.
LibreCat | Files available
 
[192]
2021 | Journal Article | LibreCat-ID: 23944
E. Moritzer and M. Richters, “Characterization of wood-filled thermoplastic polyurethane for the injection modling process,” Journal of Applied Polymer Science, 2021.
LibreCat
 
[191]
2021 | Journal Article | LibreCat-ID: 23948
E. Moritzer, M. Richters, J. Hillemeyer, and D. Krassmann, “Mit dem Schraubblind-Durchsetznieten Metallteile mit Composites bei einseitiger Zugänglichkeit verbinden,” Joining Plastics, 2021.
LibreCat
 
[190]
2021 | Book | LibreCat-ID: 22032
E. Moritzer, A. Hirsch, and C. Dalmer, Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability. Springer, 2021, pp. 112–129.
LibreCat | DOI
 
[189]
2021 | Journal Article | LibreCat-ID: 24162
E. Moritzer, J. Wächter, and C. L. Elsner, “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK,” Macromolecular Symposia, vol. 395, no. 1, 2021, doi: 10.1002/masy.202000269.
LibreCat | DOI
 
[188]
2021 | Journal Article | LibreCat-ID: 24681
E. Moritzer and C. Schumacher, “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting,” Macromolecular Symposia, vol. 395, no. 1, Art. no. 2000275, 2021, doi: 10.1002/masy.202000275.
LibreCat | DOI
 
[187]
2021 | Conference Paper | LibreCat-ID: 24554
E. Moritzer, C. L. Elsner, J. Wächter, and F. Knoop, “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems,” presented at the 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
 
[186]
2021 | Journal Article | LibreCat-ID: 24555
E. Moritzer, C. L. Elsner, and C. Schumacher, “Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters,” Polymer Composites, vol. 42, no. 11, pp. 6065–6079, 2021, doi: 10.1002/pc.26285.
LibreCat | DOI
 
[185]
2021 | Newspaper Article | LibreCat-ID: 31744
E. Moritzer, J. Hillemeyer, M. Kramer, and C. Hopmann, “Designing of thermosetting plastic components  for direct screwing - Auslegung von Duroplastbauteilen zur Direktverschraubung,” Joining Plastics, pp. 94–103, 2021.
LibreCat
 
[184]
2021 | Newspaper Article | LibreCat-ID: 31740
E. Moritzer and M. Richters, “ Characterization of wood-filled thermoplastic polyurethanes for the  injection molding process,” Journal of Applied Polymer Science, vol. 138, no. 38, 2021.
LibreCat
 
[183]
2021 | Conference Paper | LibreCat-ID: 31760
E. Moritzer, D. Krassmann, and J. Brikmann, “Entwicklung der Spritzniettechnik als  werkstoffgerechtes Fügeverfahren für hybride Strukturen,” presented at the 11. Fügetechnisches  Gemeinschaftskolloquium, Dresden, 2021.
LibreCat
 
[182]
2021 | Newspaper Article | LibreCat-ID: 31762
E. Moritzer, J. Jilg, and T. Rücker, “Er kommt auf die Korngröße an, Mikrogranulat verbessert die  Verteilung feindisperser Füllstoffe in der Direktcompoundierung,” Kunststoffe, pp. 24–27, 2021.
LibreCat
 
[181]
2021 | Newspaper Article | LibreCat-ID: 31765
E. Moritzer, J. Hillemeyer, and R. Lotzin, “Fügeelement angespritzt - Einfluss auf die Verbundfestigkeit  zwischen Organoblech und Schraubblindniet untersucht,” Kunststoffe, pp. 42–45, 2021.
LibreCat
 
[180]
2021 | Newspaper Article | LibreCat-ID: 31763
E. Moritzer, M. Wortmann, P. Krieger, B. Hüsgen, and N. Frese, “Effect of Isocyanate Absorption on the  Mechanical Properties of Silicone Elastomers in Polyurethane Vacuum Casting,” ACS Omega, 2021.
LibreCat
 
[179]
2021 | Conference Paper | LibreCat-ID: 31774
E. Moritzer, J. Wächter, and C. Fuhrmann, “ INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR,” in 23rd International Conference Materials, Burgas (Bulgarien), 2021, pp. 58–67.
LibreCat
 
[178]
2021 | Newspaper Article | LibreCat-ID: 31775
E. Moritzer, “ Kühlen mit dem Wärmerohr,” Kunststoffe, pp. 64–67, 2021.
LibreCat
 
[177]
2021 | Conference Paper | LibreCat-ID: 31781
E. Moritzer and F. I. Bürenhaus, “Untersuchung der Faserlängenabnahme von kurz- und  langglasfaserverstärk-ten Thermoplasten im Spritzgießprozess,” presented at the 27. Techomer - Fachtagung über  Verarbeitung und Anwendung von Polymeren, Chemnitz (Online), 2021.
LibreCat
 
[176]
2021 | Newspaper Article | LibreCat-ID: 31778
E. Moritzer, J. Hillemeyer, and R. Lotzin, “Molding on a Joining Element - Study of the Factors Influencing  the Strength of the Bond between a Thermoplastic Composite and a Screw-in Blind Rivet,” Kunststoffe International, pp. 29–32, 2021.
LibreCat
 
[175]
2021 | Newspaper Article | LibreCat-ID: 31780
E. Moritzer, M. Wortmann, N. Frese, J. Brinkmann, A. Ehrmann, and B. Hüsgen, “Silicone Mold Accuracy in  Polyurethane Vacuum Casting,” Macromolecular Symposia, 2021.
LibreCat
 
[174]
2021 | Conference Abstract | LibreCat-ID: 31771
E. Moritzer and F. I. Bürenhaus, “Investigation of Fiber Orientation and its Influence on Fiber Length  Degradation in Simple Shear Flow for Glass Fiber Reinforced Polypropylene,” presented at the 36th International  Conference of the Polymer Processing Society (PPS), Montréal (Kanada), 2021.
LibreCat
 
[173]
2021 | Journal Article | LibreCat-ID: 26854
E. Moritzer and F. Flachmann, “Die Fließfront darf nicht brechen,” Kunststoffe, vol. 12, pp. 42–44, 2021.
LibreCat
 
[172]
2021 | Newspaper Article | LibreCat-ID: 31707
E. Moritzer, J. Hillemeyer, M. Kramer, and C. Hopmann, “Direktverschraubung von Duroplasten Eine wirtschaftliche Lösung,” Plastverarbeiter, no. 71, pp. 56–60, 2021.
LibreCat
 
[171]
2021 | Newspaper Article | LibreCat-ID: 31725
E. Moritzer et al., “Anomalous bulk  diffusion of methylene diphenyl diisocyanate in silicone elastomer,” International Journal of Heat  and Mass Transfer, 2021.
LibreCat
 
[170]
2021 | Journal Article | LibreCat-ID: 35327
M. Wortmann et al., “Anomalous bulk diffusion of methylene diphenyl diisocyanate in silicone elastomer,” International Journal of Heat and Mass Transfer, vol. 177, Art. no. 121536, 2021, doi: 10.1016/j.ijheatmasstransfer.2021.121536.
LibreCat | DOI
 
[169]
2021 | Conference Paper | LibreCat-ID: 24101 | OA
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 467–474, doi: 10.26153/tsw/17567.
LibreCat | DOI | Download (ext.)
 
[168]
2021 | Conference Paper | LibreCat-ID: 24099 | OA
E. Moritzer, F. Hecker, C. Driediger, and A. Hirsch, “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 575–584, doi: 10.26153/tsw/17577.
LibreCat | DOI | Download (ext.)
 
[167]
2021 | Conference Paper | LibreCat-ID: 24096 | OA
E. Moritzer, F. Hecker, and A. Hirsch, “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 1268–1275, doi: 10.26153/tsw/17643.
LibreCat | DOI | Download (ext.)
 
[166]
2021 | Conference Paper | LibreCat-ID: 23746
E. Moritzer and F. Flachmann, “Influence of Chemical Blowing Agents on the Filling Behavior of Wood-Plastic-Composite Melts,” in SPE ANTEC 2021: The Annual Technical Conference for Plastic Professionals, Online, 2021, pp. 536–540.
LibreCat
 
[165]
2021 | Conference Paper | LibreCat-ID: 26390
E. Moritzer and F. Flachmann, “Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC),” presented at the 36th International Conference of the Polymer Processing Society , Montreal, 2021.
LibreCat
 
[164]
2021 | Journal Article | LibreCat-ID: 31769
E. Moritzer and M. Richters, “Injection Molding of Wood-Filled Thermoplastic Polyurethane,” Journal of  Composites Science, no. 12, 2021.
LibreCat
 
[163]
2021 | Journal Article | LibreCat-ID: 31757
E. Moritzer and D. Krassmann, “Development of a new joining technology for hybrid joints of sheet metal  and continuous fiber-reinforced thermoplastics,” Welding in the World, 2021.
LibreCat
 
[162]
2020 | Journal Article | LibreCat-ID: 24183
E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, and J. Mirasol, “Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using dimethyl sulfoxide as solvent,” JOURNAL OF INDUSTRIAL TEXTILES, no. 50, pp. 224–239, 2020.
LibreCat
 
[161]
2020 | Journal Article | LibreCat-ID: 24184
E. Moritzer, F. M. Mühlhoff, E. Krampe, and E. Lochbaum, “2K-Haftverbunde aus originär inkompatiblen Kunststoffen,” Plastverarbeiter, no. 07/20, pp. 20–23, 2020.
LibreCat
 
[160]
2020 | Conference Paper | LibreCat-ID: 24201
E. Moritzer, S. Kartelmeyer, and V. Hüttemann, “Additive Manufactured Heat Pipe Injection Mould Element,” presented at the Direct Digital Manufacturing Conference 2020, Berlin, 2020.
LibreCat
 
[159]
2020 | Conference Paper | LibreCat-ID: 24203
E. Moritzer and J. Hillemeyer, “Additiveteile Direktverschrauben,” presented at the 6. Fachkonferenz 3D-Druck in der Automobielindustrie, Hamburg, 2020.
LibreCat
 
[158]
2020 | Conference Paper | LibreCat-ID: 24206
E. Moritzer and J. Hillemeyer, “Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben,” presented at the 10. Gemeinschaftskolloquium, WebKolloquium (Deutschland), 2020.
LibreCat
 
[157]
2020 | Conference Paper | LibreCat-ID: 24213
E. Moritzer and M. Wittke, “CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020, Digital, 2020.
LibreCat
 
[156]
2020 | Conference Paper | LibreCat-ID: 24228
E. Moritzer and D. Krassmann, “Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics,” presented at the 73rd Annual Assembly of the International Institute of Welding (IIW), Online, 2020.
LibreCat
 
[155]
2020 | Journal Article | LibreCat-ID: 24232
E. Moritzer, J. Jilg, C. Schilp, N. Krempl, and W. Friesenbichler, “Die Kunst der Entformung,” Kunststoffe, pp. 60–63, 2020.
LibreCat
 
[154]
2020 | Journal Article | LibreCat-ID: 24233
E. Moritzer, M. Hopp, and M. Wittke, “EINSATZ VON MASCHINELLEM LERNEN FÜR DIE REZYKLAT-VERARBEITUNG,” WAK Jahreszeitschrift, pp. 2–5, 2020.
LibreCat
 
[153]
2020 | Journal Article | LibreCat-ID: 24234
E. Moritzer and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” Joining Plastics, pp. 96–103, 2020.
LibreCat
 
[152]
2020 | Conference Paper | LibreCat-ID: 24235
E. Moritzer, D. Krassmann, and J. Brikmann, “Entwicklung eines Spritzgießsonderverfahrens zur Herstellung von Hybridbauteilen aus faserverstärkten Thermoplasten und Metallblechen,” presented at the 10. Fügetechnisches Gemeinschaftskolloquium, 2020.
LibreCat
 
[151]
2020 | Conference Paper | LibreCat-ID: 24237
E. Moritzer, S. Kartelmeyer, M. Hüttemann, and C. Jaroschek, “INJECTION MOLD COOLED WITH ADDITIVE MANUFACTURED HEAT PIPE CORE-ELEMENT,” presented at the 78th Annual Technical Conference for Plastics Professionals (ANTEC), San Antonio (USA), 2020.
LibreCat
 
[150]
2020 | Journal Article | LibreCat-ID: 24239
E. Moritzer, F. M. Mühlhoff, E. Lochbaum, and E. Krampe, “InMould-Plasma Technologie - Dauerhaft beständige 2K-Verbunde aus originär inkompatiblen Kunststoffen,” KGK - Rubberpoint, pp. 22–26, 2020.
LibreCat
 
[149]
2020 | Conference Paper | LibreCat-ID: 24242
E. Moritzer, A. Hirsch, and C. Dalmer, “Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability,” in Additive Manufacturing in Products and Applications (AMPA), Zurich (Switzerland), 2020, pp. 112–129.
LibreCat
 
[148]
2020 | Journal Article | LibreCat-ID: 24246
E. Moritzer, F. M. Mühlhoff, and E. Krampe, “Kostensenkung beim Mehrkomponenten-Spritzgießen,” Kunststoff + Verarbeitung, no. 5, pp. 92–93, 2020.
LibreCat
 
[147]
2020 | Journal Article | LibreCat-ID: 24248
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Mehr Materialkombinationen, weniger Kosten,” Kunststoffe, pp. 39–42, 2020.
LibreCat
 
[146]
2020 | Journal Article | LibreCat-ID: 24249
E. Moritzer and M. Wittke, “Metallsubstitution durch Spritzgießtechnik gerät allmählich in Reichweite,” MNWP Magazin, pp. 26–27, 2020.
LibreCat
 
[145]
2020 | Journal Article | LibreCat-ID: 24250
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “More Material Combinations, Lower Costs,” Kunststoffe international, pp. 22–25, 2020.
LibreCat
 
[144]
2020 | Conference Paper | LibreCat-ID: 24251
E. Moritzer and D. Krassmann, “Neuartige Fügetechnik für Organoblech-Hybridverbindungen,” presented at the DVS Congress 2020, Online, 2020.
LibreCat
 
[143]
2020 | Journal Article | LibreCat-ID: 24252
E. Moritzer and M. Wittke, “Neue Maßstäbe in puncto Festigkeit und Faserlänge,” Plastverarbeiter, pp. 18–21, 2020.
LibreCat
 
[142]
2020 | Journal Article | LibreCat-ID: 24253
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Plasma technology rationalizes 2-component processes,” adhesion ADHESIVES + SEALANTS, 2020.
LibreCat
 
[141]
2020 | Journal Article | LibreCat-ID: 24256
E. Moritzer, F. M. Mühlhoff, E. Krampe, and B. Böhnke, “Plasma-Technologie zur Rationalisierung von 2K-Prozessen,” adhäsion KLEBEN & DICHTEN, no. 10, pp. 16–19, 2020.
LibreCat
 
[140]
2020 | Conference (Editor) | LibreCat-ID: 24259
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neue Organoblech-Metall-Hybridfügetechnik. 2020.
LibreCat
 
[139]
2020 | Conference Paper | LibreCat-ID: 24260
E. Moritzer and C. Schumacher, “Stainless steel parts produced by Fused Deposition Modeling and a sintering process compared to components manufactured in Selective Laser Melting,” presented at the 4th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Bukarest (Rumänien), 2020.
LibreCat
 
[138]
2020 | Conference Abstract | LibreCat-ID: 24478
E. Moritzer and J. Wächter, “From filament production to material qualification for the FDM process,” presented at the Seminar(Thermofisher): Polymer Compounds for 3D filaments – production, quality control and application, Karlsruhe, 2020.
LibreCat
 
[137]
2020 | Conference (Editor) | LibreCat-ID: 25768
E. Moritzer and D. Krassmann, Eds., Neuartige Fügetechnik für Organoblech-Hybridverbindungen. 2020.
LibreCat
 
[136]
2020 | Conference (Editor) | LibreCat-ID: 25779
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neue Organoblech-Metall-Hybridfügetechnik. 2020.
LibreCat
 
[135]
2020 | Journal Article | LibreCat-ID: 35328
M. Wortmann et al., “The Deterioration Mechanism of Silicone Molds in Polyurethane Vacuum Casting,” ACS Applied Polymer Materials, vol. 2, no. 11, pp. 4719–4732, 2020, doi: 10.1021/acsapm.0c00744.
LibreCat | DOI
 
[134]
2020 | Conference Paper | LibreCat-ID: 24247
E. Moritzer and J. Hillemeyer, “Material Specific Predicting of the Optimal Joining Parameters for the Screw Blind Rivet Joining Process,” presented at the 73rd Annual Assembly of International Institute of Welding (IIW) and International Conference, 2020.
LibreCat
 
[133]
2020 | Journal Article | LibreCat-ID: 25901 | OA
M. Wortmann et al., “Chemical and Morphological Transition of Poly(acrylonitrile)/Poly(vinylidene Fluoride) Blend Nanofibers during Oxidative Stabilization and Incipient Carbonization,” Nanomaterials, Art. no. 1210, 2020, doi: 10.3390/nano10061210.
LibreCat | DOI | Download (ext.)
 
[132]
2020 | Book Chapter | LibreCat-ID: 24479
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “The Influence of Hydrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics and its Non-Destructive Characterization,” in Advances in Polymer Processing 2020, Berlin, Heidelberg, 2020.
LibreCat | DOI
 
[131]
2019 | Conference (Editor) | LibreCat-ID: 25580
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. 2019.
LibreCat
 
[130]
2019 | Conference Paper | LibreCat-ID: 25582
E. Moritzer and D. Krassmann, “Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, 2019.
LibreCat
 
[129]
2019 | Conference (Editor) | LibreCat-ID: 25583
E. Moritzer and D. Krassmann, Eds., Nieten ohne Fügeelement zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. 2019.
LibreCat
 
[128]
2019 | Journal Article | LibreCat-ID: 25608
E. Moritzer et al., “New Polymers for Needleless Electrospinning from Low-Toxic Solvents,” NANOMATERIALS, no. 9, Art. no. 52, 2019.
LibreCat
 
[127]
2019 | Journal Article | LibreCat-ID: 25610
E. Moritzer et al., “Advanced output of silicone molds in vacuum casting processes by polyamide 12 powder supplementation,” POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, no. 58, pp. 1937–1943, 2019.
LibreCat
 
[126]
2019 | Conference Paper | LibreCat-ID: 25611
E. Moritzer, M. Hüttner, M. Henning, M. Webesen, and F. Woitschek, “Akustische Charakterisierung der mechanischen Eigenschaften künstlich gealterter Polymere,” in 45. Deutsche Jahrestagung für Akustik - DAGA, Rostock (Deutschland), 2019, pp. 505–508.
LibreCat
 
[125]
2019 | Conference Paper | LibreCat-ID: 25613
E. Moritzer and T. Westhues, “Analyse von Wirrmattenstrukturen hinsichtlich der Substitutionsfähigkeit von Schaumstoffen in Polstern und Matratzen,” in 26. Fachtagung über die Verarbeitung und Anwendung von Polymere, Chemnitz (Deutschland), 2019, p. S. 74.
LibreCat
 
[124]
2019 | Conference Paper | LibreCat-ID: 25621
E. Moritzer and A. Hirsch, “Charakterisierung des Arburg Kunststoff Freiformens,” presented at the ProduktionNRW/VDMA NRW – Erfa Additive Manufacturing Kunststoff – Design und Fertigung, Lennestadt (Deutschland), 2019.
LibreCat
 
[123]
2019 | Conference Paper | LibreCat-ID: 25624
E. Moritzer and J. Jilg, “Determining the degree of agglomeration of solid additives while using inline injection molding compounding (IIMC),” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[122]
2019 | Conference Paper | LibreCat-ID: 25626
E. Moritzer and J. Hillemeyer, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
 
[121]
2019 | Conference Paper | LibreCat-ID: 25630
E. Moritzer and J. Hillemeyer, “Experimental Determination of Reduction Factors for Dimensioning the Shear Tensil Strength of the Screw Blind Riveting,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[120]
2019 | Journal Article | LibreCat-ID: 25631
E. Moritzer and J. Hillemeyer, “Experimental Investigations Into the Dimensioning of the Static Pull-Out Strength of the Screw Blind Rivet,” Joining Plastics, pp. 40–46, 2019.
LibreCat
 
[119]
2019 | Journal Article | LibreCat-ID: 25635
E. Moritzer, M. Wortmann, N. Frese, L. Hes, A. Golzhauser, and A. Ehrmann, “Improved abrasion resistance of textile fabrics due to polymer coatings,” JOURNAL OF INDUSTRIAL TEXTILES, no. 49, pp. 572–583, 2019.
LibreCat
 
[118]
2019 | Conference Paper | LibreCat-ID: 25636
E. Moritzer, D. Netzband, and A. Ujma, “Influences on structural intensity for injection mouldet thermoplastic parts,” presented at the 23rd International Congress on Acoustics, Aachen (Deutschland), 2019.
LibreCat
 
[117]
2019 | Journal Article | LibreCat-ID: 25637
E. Moritzer, F. M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, and S. Asad, “Inline-Oberflächenaktivierung mittels Plasma für das 2K-Spritzgießen,” Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik, pp. 54–59, 2019.
LibreCat
 
[116]
2019 | Conference Paper | LibreCat-ID: 25638
E. Moritzer, F. M. Mühlhoff, T. Nordmeyer, B. Böhnke, E. Krampe, and S. Asad, “InMould-Plasma,” presented at the Eröffnung Plasma-Campus bei Plasmatreat GmbH, Steinhagen (Deutschland), 2019.
LibreCat
 
[115]
2019 | Journal Article | LibreCat-ID: 25639
E. Moritzer, J. Jilg, and N. Sibbe, “Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU),” PU MAGAZIN - International, pp. 320–324, 2019.
LibreCat
 
[114]
2019 | Journal Article | LibreCat-ID: 25640
E. Moritzer, J. Jilg, and N. Sibbe, “Investigation of the bond strength between injection moulded TPU and a reactive, castable polyurethane mass (PU),” TPE Magazine international, no. 4, pp. 230–234, 2019.
LibreCat
 
[113]
2019 | Conference Paper | LibreCat-ID: 25689
E. Moritzer, M. Hüttner, D. Krassmann, and M. Wittke, “Lebensdauer von Composites und Composite-Metall-Hybridverbindungen,” presented at the Werkstoffwoche, Dresden (Deutschland), 2019.
LibreCat
 
[112]
2019 | Conference Paper | LibreCat-ID: 25738
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.
LibreCat
 
[111]
2019 | Conference Paper | LibreCat-ID: 25745
E. Moritzer and A. Hirsch, “Oberflächennachbearbeitung und Kleben von FDM-Bauteilen,” presented at the DGM-Seminar für Fortgeschrittene, Paderborn (Deutschland), 2019.
LibreCat
 
[110]
2019 | Conference Paper | LibreCat-ID: 25747
E. Moritzer and T. Westhues, “Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer,” presented at the 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
 
[109]
2019 | Journal Article | LibreCat-ID: 25748
E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, pp. 867–873, 2019.
LibreCat
 
[108]
2019 | Conference Paper | LibreCat-ID: 25755
E. Moritzer and M. Wittke, “Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
 
[107]
2019 | Conference Paper | LibreCat-ID: 25756
E. Moritzer, S. Kartelmeyer, B. Hüttemann, and C. Jaroschek, “Spritzgießwerkzeuge mit Heatpipe-Temperierung,” presented at the 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
 
[106]
2019 | Journal Article | LibreCat-ID: 25757
E. Moritzer, J. Jilg, and N. Sibbe, “Untersuchung der Verbundhaftung zwischen spritzgegossenen TPUs und einer reaktiven, gießfähigen Polyurethanmasse,” PU MAGAZIN, pp. 220–224, 2019.
LibreCat
 
[105]
2019 | Conference Paper | LibreCat-ID: 25760
E. Moritzer and J. Jilg, “Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC),” presented at the 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.
LibreCat
 
[104]
2019 | Journal Article | LibreCat-ID: 23844
F. I. Bürenhaus, E. Moritzer, and A. Hirsch, “Adhesive bonding of FDM-manufactured parts made of ULTEM 9085 considering surface treatment, surface structure, and joint design,” Welding in the World, pp. 1819–1832, 2019.
LibreCat | DOI
 
[103]
2019 | Newspaper Article | LibreCat-ID: 23845
E. Moritzer, F. I. Bürenhaus, and A. Hirsch, “Advancing into New Dimensions,” Kunststoffe internationl, vol. 109, no. 2, pp. 48–52, 2019.
LibreCat | PubMed | Europe PMC
 
[102]
2019 | Newspaper Article | LibreCat-ID: 23850
E. Moritzer, F. I. Bürenhaus, and A. Hirsch, “Vorstoß in neue Dimensionen,” Kunststoffe, vol. 109, no. 2, pp. 68–72, 2019.
LibreCat
 
[101]
2019 | Conference Paper | LibreCat-ID: 22022
E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat | DOI
 
[100]
2019 | Journal Article | LibreCat-ID: 22047
E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, vol. 63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.
LibreCat | DOI
 
[99]
2019 | Conference Paper | LibreCat-ID: 22028
E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi: 10.1063/1.5088314.
LibreCat | DOI
 
[98]
2019 | Book | LibreCat-ID: 22026
E. Moritzer, A. Hirsch, and S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung. Springer Vieweg, 2019, pp. 185–198.
LibreCat | DOI
 
[97]
2019 | Conference Paper | LibreCat-ID: 22041
E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.
LibreCat | DOI
 
[96]
2018 | Conference Paper | LibreCat-ID: 25784
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn, 2018.
LibreCat
 
[95]
2018 | Conference Paper | LibreCat-ID: 25785
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn, 2018.
LibreCat
 
[94]
2018 | Conference (Editor) | LibreCat-ID: 25787
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen. 2018.
LibreCat
 
[93]
2018 | Conference (Editor) | LibreCat-ID: 25788
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen. 2018.
LibreCat
 
[92]
2018 | Conference Paper | LibreCat-ID: 25790
E. Moritzer, C. Budde, and D. Krassmann, “ Neue Methoden zum Fügen von Organoblechen,” presented at the Fügen von Kunststoffen im Automobil 2018, Landshut, 2018.
LibreCat
 
[91]
2018 | Conference Paper | LibreCat-ID: 26937
E. Moritzer and A. Hirsch, “Charakterisierung des Arburg Kunststoff Freiformens,” presented at the WAK-Symposium, Bayreuth (Deutschland), 2018.
LibreCat
 
[90]
2018 | Conference Paper | LibreCat-ID: 26938
E. Moritzer, A. Hirsch, and S. Paulus, “Dauerschwinguntersuchungen an FDM-Verstärkungsstrukturen,” presented at the 3. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin (Deutschland), 2018.
LibreCat
 
[89]
2018 | Journal Article | LibreCat-ID: 26939
E. Moritzer, J. Jilg, Y. Martin, and E. Müller, “Die effiziente Materialentwicklung mittels Spritzgießdirektcompoundierung (SGDC),” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 14. Jg. Heft 1, pp. 1–34, 2018.
LibreCat
 
[88]
2018 | Journal Article | LibreCat-ID: 26941
E. Moritzer and T. Nordmeyer, “Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints,” Welding in the World, vol. 62. Jg. Heft 3, pp. 601–608, 2018.
LibreCat
 
[87]
2018 | Journal Article | LibreCat-ID: 26942
E. Moritzer and T. Nordmeyer, “Einfluss der Oberflächenaktivierung mittels der Direktinjektion- und der Atmosphärendruck-Plasmabehandlung für das Kleben von Kunststoffen,” Joining Plastics, vol. 12. Jg. Heft 2, 2018.
LibreCat
 
[86]
2018 | Journal Article | LibreCat-ID: 26946
E. Moritzer et al., “Examination of Interpenetrating Polymer Networks of Polyurea in Silicone Molds Arising During Vacuum Castin Processes,” Polymer-Plastics Technology and Engineering, vol. 57. Jg. Heft 15, pp. 1524–1529, 2018.
LibreCat
 
[85]
2018 | Journal Article | LibreCat-ID: 26948
E. Moritzer, J. Jilg, A. Neunhäuserer, and W. Friesenbichler, “Glasfaseragglomerate im Visier - eine Zerreißprobe,” Kunststoffe, vol. 108. Jg., no. Heft 7, pp. 48–52, 2018.
LibreCat
 
[84]
2018 | Conference Paper | LibreCat-ID: 26949
E. Moritzer and B. Landgräber, “Inflation Behavior of Preforms in the Special Injection Molding Process GITBlow Combining Gas Assisted Injection Molding and Blow Molding,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
 
[83]
2018 | Conference Paper | LibreCat-ID: 26951
E. Moritzer, T. Nordmeyer, B. Böhnke, A. Marinkovic, G. Hoffmann, and S. S. Asad, “Inline-Oberflächenvorbehandlung durch Direktinjektion-Plasma - Neue Möglichkeiten für das Mehrkomponentenspritzgießen,” presented at the 17. EWIKON Heißkanal-Forum, Frankenberg (Deutschland), 2018.
LibreCat
 
[82]
2018 | Conference Paper | LibreCat-ID: 26953
E. Moritzer and G. Heiderich, “Investigation on the Fiber Compounding with a New Type of Compounding Machine,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
 
[81]
2018 | Conference Paper | LibreCat-ID: 26961
E. Moritzer, C. Budde, and D. Krassmann, “Neue Methoden zum Fügen von Organoblechen,” presented at the Fügen von Kunststoffen im Automobil 2018, Landshut (Deutschland), 2018.
LibreCat
 
[80]
2018 | Conference Paper | LibreCat-ID: 26963
E. Moritzer, G. Heiderich, and M. Wittke, “Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
 
[79]
2018 | Conference Paper | LibreCat-ID: 26969
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Spritznieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
 
[78]
2018 | Conference Paper | LibreCat-ID: 26970
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Stempelnieten als neuartige Fügetechnik für Organoblech-Metall-Hybridverbindungen,” presented at the 8. Fügetechnisches Gemeinschaftskolloquium, Paderborn (Deutschland), 2018.
LibreCat
 
[77]
2018 | Journal Article | LibreCat-ID: 26971
E. Moritzer and M. Wittke, “Synergies from the Screw,” Kunststoffe International, no. 12/2018, pp. 34–37, 2018.
LibreCat
 
[76]
2018 | Journal Article | LibreCat-ID: 26972
E. Moritzer and M. Wittke, “Syngerien aus der Schnecke,” Kunststoffe, no. 12/2018, pp. 69–72, 2018.
LibreCat
 
[75]
2018 | Conference Paper | LibreCat-ID: 26974
E. Moritzer and T. Nordmeyer, “System Integration of the Direct Injection Plasma Treatment for Injection Molding for Subsequent Assembly Processes,” presented at the Joining in Car Body Engineering 2018, Bad Nauheim (Deutschland), 2018.
LibreCat
 
[74]
2018 | Conference Paper | LibreCat-ID: 26975
E. Moritzer, A. Hirsch, M. Hüttner, and J. Wächter, “The Influence of Environmental Aging on the Material Properties of Back-Molded Composite Sheets,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
 
[73]
2018 | Conference Paper | LibreCat-ID: 26977
E. Moritzer and M. Hüttner, “The Influence of Hygrothermal Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
 
[72]
2018 | Book Chapter | LibreCat-ID: 26979
E. Moritzer and B. Landgräber, “Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen,” in Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen, 1st ed., Bielefeld, 2018, pp. 127–140.
LibreCat
 
[71]
2017 | Conference Paper | LibreCat-ID: 25578
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, 2017.
LibreCat
 
[70]
2017 | Conference Paper | LibreCat-ID: 24529
E. Moritzer and M. Hopp, “Bonding of Plastic Parts with Dispersion Adhesives – Film Formation via Diffusion Processes,” 2017.
LibreCat
 
[69]
2017 | Conference (Editor) | LibreCat-ID: 25739
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, Eds., Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen. 2017.
LibreCat
 
[68]
2017 | Conference Paper | LibreCat-ID: 27200
E. Moritzer and T. Westhues, “Ansatz zur Beschreibung von unregelmäßig gefügten Kunststofffilamenten in Wirrmattenstrukturen unter mechanischer Belastung,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
 
[67]
2017 | Conference Paper | LibreCat-ID: 27203
E. Moritzer and B. Landgräber, “Comparison of the Processing Properties of Thermoplastics Elastomers and Thermoplastics Using Gas Assisted Injection Molding,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[66]
2017 | Conference Paper | LibreCat-ID: 27204
E. Moritzer, C. Budde, and M. Hüttner, “Das Spritznieten von Organoblechen als neuartiges Fügeverfahren zur Herstellung von Composite-Metall-Hybridverbindungen,” presented at the Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
 
[65]
2017 | Conference Paper | LibreCat-ID: 27206
E. Moritzer and T. Nordmeyer, “Development of an Inline Plasma Treatment during Injection Molding Process for High Adhesive Strengths,” presented at the 12th SPE Annual Automotive Engineering Plastics Conference (AutoEPCON), Detroit (USA), 2017.
LibreCat
 
[64]
2017 | Conference Paper | LibreCat-ID: 27209
E. Moritzer and T. Nordmeyer, “Effect of an Inline-Plasma Treatment during Injection Molding Process on the Bonding Strength of Adhesive Bonded Joints,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[63]
2017 | Conference Paper | LibreCat-ID: 27212
E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Entwicklung einer neuartigen Fügetechnik für Organoblech-Hybridverbindungen,” presented at the 7. Fügetechnisches Gemeinschaftskolloquium, Dresden (Deutschland), 2017.
LibreCat
 
[62]
2017 | Conference Paper | LibreCat-ID: 27215
E. Moritzer, G. Heiderich, and A. Hirsch, “Fiber Length Reduction during Injection Molding,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
 
[61]
2017 | Journal Article | LibreCat-ID: 27218
E. Moritzer, T. Nordmeyer, and M. Häußler, “Inline Surface Activation in the Injection Molding Process for High Adhesive Strength,” adhesion ADHESIVES & SEALANTS, no. 14. Jg. Heft 4, 2017.
LibreCat
 
[60]
2017 | Journal Article | LibreCat-ID: 27219
E. Moritzer, T. Nordmeyer, and M. Häußler, “Inline-Oberflächenaktivierung im Spritzgießprozess für hohe Klebfestigkeiten,” Adhäsion, no. 61. Jg. Heft 10, pp. 46–51, 2017.
LibreCat
 
[59]
2017 | Conference Paper | LibreCat-ID: 27223
E. Moritzer and B. Landgräber, “Investigations on the Production of Hybrid Structures Using the Two-Stage GITBlow-Process,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
 
[58]
2017 | Journal Article | LibreCat-ID: 27224
E. Moritzer, J. Krugmann, and C. Leister, “Alterung von plasmabehandelten Kunststoffen – Alles eine Frage der Zeit?,” Kunststoffe erfolgreich kleben, no. 1, pp. 81–86, 2017.
LibreCat
 
[57]
2017 | Journal Article | LibreCat-ID: 27225
E. Moritzer, N. Friedrich, and J. Berger, “Laserdurchstrahlkleben von opaken Kunststoffen – Schnell und zuverlässig. ,” Kunststoffe erfolgreich kleben, no. 1, pp. 213–221, 2017.
LibreCat
 
[56]
2017 | Conference Paper | LibreCat-ID: 27229
E. Moritzer, B. Landgräber, and Y. Martin, “Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
 
[55]
2017 | Conference Paper | LibreCat-ID: 27230
E. Moritzer, B. Landgräber, and Y. Martin, “Modeling and Simulation of the Inflation Step in the Two-Stage GITBlow-Process,” presented at the 17th Annual International Polymer Colloquium (IPC), Madison (USA), 2017.
LibreCat
 
[54]
2017 | Journal Article | LibreCat-ID: 27243
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, no. 8. Jg. Heft 8, p. 246, 2017.
LibreCat
 
[53]
2017 | Journal Article | LibreCat-ID: 27244
E. Moritzer et al., “Untersuchung der Alterungsmechanismen von Silikon-Gießwerkzeugen beim Vakuumgießen,” Ingenieurspiegel - Fachmagazin für Ingenieure, no. 5. Jg. Heft 3, pp. 52–54, 2017.
LibreCat
 
[52]
2017 | Journal Article | LibreCat-ID: 22038
E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni, “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems,” Micromachines, vol. 8, no. 246, 2017, doi: 10.3390/mi8080246.
LibreCat | DOI
 
[51]
2016 | Conference Paper | LibreCat-ID: 27246
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “An Approach to Non-Destructive Testing of Aged Polymers,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[50]
2016 | Journal Article | LibreCat-ID: 27250
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Detecting Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers,” Kunststoffe international, no. 10. Jg. Heft 4, pp. 43–45, 2016.
LibreCat
 
[49]
2016 | Conference Paper | LibreCat-ID: 27251
E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, and C. Buske, “Development of an Inline Plasma Treatment During Injection Molding Process,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[48]
2016 | Conference Paper | LibreCat-ID: 27252
E. Moritzer, C. Budde, and M. Hüttner, “Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints,” presented at the Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland), 2016.
LibreCat
 
[47]
2016 | Conference Paper | LibreCat-ID: 27253
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren,” presented at the Safe and Reliable Structures, Dalheim (Deutschland), 2016.
LibreCat
 
[46]
2016 | Conference Paper | LibreCat-ID: 27254
E. Moritzer and Y. Martin, “Experimental Investigations on the Fibre Length Degradation in Injection Moulds,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[45]
2016 | Conference Paper | LibreCat-ID: 27255
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
 
[44]
2016 | Conference Paper | LibreCat-ID: 27256
E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 16th Annual International Polymer Colloquium (IPC), Madison (USA), 2016.
LibreCat
 
[43]
2016 | Conference Paper | LibreCat-ID: 27257
E. Moritzer and G. Heiderich, “Fiber Length Reduction during Shearing in Polymer Processing,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
 
[42]
2016 | Journal Article | LibreCat-ID: 27259
E. Moritzer, R. Kleeschulte, S. Zavoral, and E. Kaiser, “Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie,” Kunststoffe, no. 106. Jg. Heft 2, pp. 54–58, 2016.
LibreCat
 
[41]
2016 | Journal Article | LibreCat-ID: 27260
E. Moritzer et al., “In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern,” Kunststoffe, no. 106. Jg. Heft 8, pp. 70–72, 2016.
LibreCat
 
[40]
2016 | Journal Article | LibreCat-ID: 27264
E. Moritzer, Y. Martin, and E. Müller, “Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess,” Kunststofftechnik - Spritzgießen 2016, no. 1, pp. 27–39, 2016.
LibreCat
 
[39]
2016 | Journal Article | LibreCat-ID: 27267
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Molekularen Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in gealterten Polymeren,” Kunststoffe, no. 106. Jg. Heft 6, pp. 94–96, 2016.
LibreCat
 
[38]
2016 | Conference Paper | LibreCat-ID: 27269
E. Moritzer, C. Budde, and M. Hüttner, “Organoblechnieten,” presented at the 22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
LibreCat
 
[37]
2016 | Journal Article | LibreCat-ID: 27271
E. Moritzer, V. Schöppner, P. Lakemeyer, and T. Nordmeyer, “Plasmaunterstütztes Fügen von Kunststoffen,” Joining Plastics, no. 10. Jg. Heft 2, pp. 100–108, 2016.
LibreCat
 
[36]
2016 | Conference Paper | LibreCat-ID: 27276
E. Moritzer, I. Fiebig, M. Hüttner, B. Henning, and M. Webersen, “The Development of a Non-Destructive Testing Method for the Characterization of Hygrothermally Aged Polymers,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
 
[35]
2016 | Journal Article | LibreCat-ID: 27278
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ultraschallbasierte Charakterisierung von gealterten Polymeren,” Jahresmagazin Kunststofftechnik, pp. 98–103, 2016.
LibreCat
 
[34]
2016 | Conference Paper | LibreCat-ID: 27279
E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Zerstörungsfreie Charakterisierung des hydrothermischen Alterungsverhaltens von Polymeren,” presented at the 18. GMA/ITG Fachtagung Sensoren und Messsysteme, Nürnberg (Deutschland), 2016.
LibreCat
 
[33]
2016 | Journal Article | LibreCat-ID: 22025
E. Moritzer et al., “Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme,” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ, vol. 6, pp. 65–70, 2016.
LibreCat
 
[32]
2015 | Conference Paper | LibreCat-ID: 24530
E. Moritzer and M. Hopp, “Bonding of Wood Plastic Composites (WPC) - Material and Surface Modification for Special Applications,” 2015.
LibreCat
 
[31]
2015 | Newspaper Article | LibreCat-ID: 27292
E. Moritzer, C. Budde, and M. Hüttner, “Wie Kurz- und Endlosfasern sich am besten vertragen,” Kunststoffe, vol. 105, no. 3, 2015.
LibreCat
 
[30]
2015 | Newspaper Article | LibreCat-ID: 27295
E. Moritzer, C. Leister, and T. Nordmeyer, “Analyse der Behandlungswirkung auf Kunststoffen durch Atmosphärendruck-Plasma,” Zeitschrift Kunststofftechnik, vol. 11, no. 4, pp. 205–226, 2015.
LibreCat
 
[29]
2015 | Conference Paper | LibreCat-ID: 27297
E. Moritzer, R. Kleeschulte, S. Pollmann, and K. Anger, “Development of a Function-Integrated Thermoplastic Foam Structure with High Mechanical Resistance and Water Impermeability as Well as Low Thermal Conductivity at the Same Time,” presented at the Europe-Africa Conference of the Polymer Processing Society, Graz (Österreich), 2015.
LibreCat
 
[28]
2015 | Conference Paper | LibreCat-ID: 27304
E. Moritzer and C. Budde, “Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (Österreich), 2015.
LibreCat
 
[27]
2015 | Conference Paper | LibreCat-ID: 27309
E. Moritzer, C. Leister, T. Nordmeyer, A. Grishin, and A. Knospe, “Investigations of the Surface Activation of Thermoplastic Polymers by Atmospheric Pressure Plasma Treatment with a Stationary Plasma Jet,” presented at the 31st International Conference of Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[26]
2015 | Conference Paper | LibreCat-ID: 27312
E. Moritzer and C. Budde, “Leichtbau mit hybriden Werkstoffen - Konstruktion eines innovativen Vorderachsträgers,” presented at the DVS Congress, Nürnberg (Deutschland), 2015.
LibreCat
 
[25]
2015 | Conference Paper | LibreCat-ID: 27313
E. Moritzer and G. Heiderich, “Mechanical Recycling of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
 
[24]
2015 | Newspaper Article | LibreCat-ID: 27317
E. Moritzer and S. Seidel, “Numerical Analysis and Evaluation of Process and Geometry Specific Transient Temperature Fields for a New Variation of Gas-Assisted Injection Molding,” International Polymer Processing, vol. 30, no. 2, pp. 265–275, 2015.
LibreCat
 
[23]
2015 | Newspaper Article | LibreCat-ID: 27326
E. Moritzer, J. Leßmann, T. Plugge, and S. Seidel, “Two-Stage-GITBlow - Modellbildung, Simulation und Optimierung der Wanddickenhomogenität,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 11, no. 2, pp. 69–102, 2015.
LibreCat
 
[22]
2015 | Conference Paper | LibreCat-ID: 27327
E. Moritzer, Y. Martin, S. Yatsenko, P. Heidemeyer, and M. Bastian, “Wood Polymer Composites (WPC) als Kernmaterial im Sandwichspritzgießen,” presented at the 24. Fachtagung Technomer, Chemnitz (Deutschland), 2015.
LibreCat
 
[21]
2014 | Conference Paper | LibreCat-ID: 24532
E. Moritzer and M. Hopp, “The setting behavior of dispersion adhesives during bonding of Wood Plastic Composites (WPC),” 2014.
LibreCat
 
[20]
2014 | Newspaper Article | LibreCat-ID: 27328
E. Moritzer, C. Budde, and C. Leister, “Affect of Atmospheric Pressure Plasma Pre-Treatment and Aging Conditions on the Surface of Thermoplastics,” Welding in the World, vol. 58, 2014.
LibreCat
 
[19]
2014 | Conference Paper | LibreCat-ID: 27330
E. Moritzer, Y. Martin, E. Müller, and R. Kleeschulte, “Artificial Neural Networks to Model Formulation-Property Correlations in the Process of Inline-Compounding on an Injection Moulding Machine,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[18]
2014 | Conference Paper | LibreCat-ID: 27333
E. Moritzer and S. Seidel, “Control of Heat Conduction Processes for the Improvement of Part Properties in the Two-Stage GITBlow Process,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[17]
2014 | Conference Paper | LibreCat-ID: 27335
E. Moritzer, “Die Spritzgießsonderverfahren GITBlow, GRIPBlow und Einstufiges GITBlow,” presented at the WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
 
[16]
2014 | Newspaper Article | LibreCat-ID: 27336
E. Moritzer and J. Krugmann, “Entwicklung einer neuen mechanischen Befestigungslösung mit gleichmäßig krafteinleitenden, dichtendem Hinterschnitt,” Joining Plastics, vol. 8, no. 3, pp. 178–182, 2014.
LibreCat
 
[15]
2014 | Conference Paper | LibreCat-ID: 27339
E. Moritzer and G. Heiderich, “Experimental Investigations of the Mechanical Recycling of Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets by Injection Molding,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[14]
2014 | Conference Paper | LibreCat-ID: 27340
E. Moritzer and G. Heiderich, “Experimental Investigations on Injection Molded Parts of Mechanically Recycled Offcuts from the Production of Continuous Fiber-Reinforced Thermoplastic Sheets,” presented at the 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat
 
[13]
2014 | Conference Paper | LibreCat-ID: 27343
E. Moritzer and C. Budde, “Hybrid Lightweight Construction of a Chassis Frame Structure,” presented at the Polymers and Energy, Jena (Deutschland), 2014.
LibreCat
 
[12]
2014 | Newspaper Article | LibreCat-ID: 27345
E. Moritzer, S. Seidel, S. Gövert, and J. Schnieders, “Im geschlossenen Werkzeug aufgeblasen,” Kunststoffe, vol. 104, no. 5, 2014.
LibreCat
 
[11]
2014 | Conference Paper | LibreCat-ID: 27347
E. Moritzer and S. Seidel, “Influence of Process Parameters on Wall Thickness Distribution During the Initial Step of the Direct GITBlow Process,” presented at the 30th International Conference of The Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
 
[10]
2014 | Conference Paper | LibreCat-ID: 27350
E. Moritzer and J. Krugmann, “Molded-On Mechanical Fastener Ensures Uniform Force Transmission and Sealing of the Joint Surface: Joining Parts Together with the Aid of Self-Tapping Screws,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[9]
2014 | Newspaper Article | LibreCat-ID: 27351
E. Moritzer and R. Kleeschulte, “Nicht nur gleich und gleich gesellt sich gern,” Kunststoffe, vol. 104, no. 8, pp. 50–53, 2014.
LibreCat
 
[8]
2014 | Conference Paper | LibreCat-ID: 27352
E. Moritzer and J. Krugmann, “Nutzung der Materialdeformation zur Entwicklung eines neuartigen Kunststoffblindniets,” presented at the PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
 
[7]
2014 | Newspaper Article | LibreCat-ID: 27355
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics, vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
 
[6]
2014 | Conference Paper | LibreCat-ID: 27358
E. Moritzer and C. Budde, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
 
[5]
2014 | Conference Paper | LibreCat-ID: 27359
E. Moritzer and C. Budde, “Study of the Bond Strength of a Combination Consisting of Polypropylene Composite Sheet and Short-Fiber Thermoplastic,” presented at the Euro Hybrid Materials and Systems 2014 (EHMS), Stade (Deutschland), 2014.
LibreCat
 
[4]
2014 | Newspaper Article | LibreCat-ID: 27362
E. Moritzer and G. Heiderich, “Vom Reststoff zum hochtechnischen Spritzgießkunststoff - Recyclingtechnologie für thermoplastische endlosfaserverstärkte Kunststoffe,” Ingenieurspiegel - Fachmagazin für Ingenieure, vol. 1, no. 3, pp. 50–52, 2014.
LibreCat
 
[3]
2014 | Conference Paper | LibreCat-ID: 16098
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” Stade, 2014, pp. 101–108.
LibreCat
 
[2]
2014 | Journal Article | LibreCat-ID: 16125
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics , vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
 
[1]
2012 | Journal Article | LibreCat-ID: 26132
N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, and H.-J. Schmid, “Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess,” Chemie Ingenieur Technik, pp. 1584–1589, 2012, doi: 10.1002/cite.201100223.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed