Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
151 Publications
2024 | Special Issue | LibreCat-ID: 51133
Maghemite nanoparticles synthesis via spray flame synthesis and particle characterization by hole in a tube sampling and scanning mobility particle sizing (HIAT-SMPS)
R. Tischendorf, O. Massopo, H.-J. Schmid, O. Pyrmak, S. Dupont, F. Fröde, H. Pitsch, R. Kneer, eds., Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS), Elsevier, 2024.
LibreCat
| DOI
| Download (ext.)
R. Tischendorf, O. Massopo, H.-J. Schmid, O. Pyrmak, S. Dupont, F. Fröde, H. Pitsch, R. Kneer, eds., Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS), Elsevier, 2024.
2024 | Preprint | LibreCat-ID: 51731 |
Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols
J. Beimdiek, H.-J. Schmid, Atmosphere (2024).
LibreCat
| Download (ext.)
J. Beimdiek, H.-J. Schmid, Atmosphere (2024).
2024 | Journal Article | LibreCat-ID: 52357 |
Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols
J. Beimdiek, H.-J. Schmid, Atmosphere 15 (2024).
LibreCat
| DOI
| Download (ext.)
J. Beimdiek, H.-J. Schmid, Atmosphere 15 (2024).
2023 | Conference Abstract | LibreCat-ID: 44102
Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
LibreCat
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
2023 | Journal Article | LibreCat-ID: 36983 |
Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems
S. Josch, S. Jesinghausen, C. Dechert, H.-J. Schmid, Rheologica Acta (2023).
LibreCat
| DOI
| Download (ext.)
S. Josch, S. Jesinghausen, C. Dechert, H.-J. Schmid, Rheologica Acta (2023).
2023 | Conference Abstract | LibreCat-ID: 43236
CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag)
T. Rüther, H.-J. Schmid, in: 2023.
LibreCat
| Files available
T. Rüther, H.-J. Schmid, in: 2023.
2023 | Journal Article | LibreCat-ID: 43034 |
Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete
S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).
LibreCat
| DOI
| Download (ext.)
S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).
2023 | Journal Article | LibreCat-ID: 43128
Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder Technology 422 (2023).
LibreCat
| DOI
M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder Technology 422 (2023).
2023 | Conference Abstract | LibreCat-ID: 44244
Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern
S. Ponusamy, H.-J. Schmid, in: 2023.
LibreCat
| Files available
S. Ponusamy, H.-J. Schmid, in: 2023.
2023 | Conference Abstract | LibreCat-ID: 44103
Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
LibreCat
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.
2023 | Journal Article | LibreCat-ID: 46815 |
Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).
2023 | Journal Article | LibreCat-ID: 43046 |
Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties
S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology (2023).
LibreCat
| DOI
| Download (ext.)
S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology (2023).
2023 | Book Chapter | LibreCat-ID: 46870
Case Study IV: Individualized Medical Technology using Additive Manufacturing
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.
LibreCat
| DOI
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.
2023 | Conference Abstract | LibreCat-ID: 47626
Correlation between SLS-Powder processability and particle properties
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, Düsseldorf, 2023, pp. 172–176.
LibreCat
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, Düsseldorf, 2023, pp. 172–176.
2023 | Conference Paper | LibreCat-ID: 46764 |
Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat
| Download (ext.)
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
2023 | Special Issue | LibreCat-ID: 51136
Large eddy simulation of iron oxide formation in a laboratory spray flame
F. Fröde, T. Grenga, H. Pitsch, S. Dupont, R. Kneer, R. Tischendorf, O. Massopo, H.-J. Schmid, eds., Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame, Elsevier, 2023.
LibreCat
| DOI
| Download (ext.)
F. Fröde, T. Grenga, H. Pitsch, S. Dupont, R. Kneer, R. Tischendorf, O. Massopo, H.-J. Schmid, eds., Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame, Elsevier, 2023.
2023 | Conference Abstract | LibreCat-ID: 51147
Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch, M. Bieber, M. Reddemann, R. Kneer, in: 2023.
LibreCat
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch, M. Bieber, M. Reddemann, R. Kneer, in: 2023.
2023 | Conference Abstract | LibreCat-ID: 51145
Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster)
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, T. Kasper, in: 2023.
LibreCat
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, T. Kasper, in: 2023.
2023 | Conference Abstract | LibreCat-ID: 51142
Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann, T. Grenga, R. Kneer, in: 2023.
LibreCat
O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann, T. Grenga, R. Kneer, in: 2023.
2023 | Conference Abstract | LibreCat-ID: 51726
Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)
J. Beimdiek, S. Schiller, H.-J. Schmid, in: Paderborn, 2023.
LibreCat
| Files available
J. Beimdiek, S. Schiller, H.-J. Schmid, in: Paderborn, 2023.
2023 | Conference Paper | LibreCat-ID: 51727
Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system
J. Beimdiek, S. Schiller, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.
LibreCat
| Files available
J. Beimdiek, S. Schiller, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.
2023 | Conference Paper | LibreCat-ID: 51218 |
Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
2023 | Conference Paper | LibreCat-ID: 46862 |
Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
LibreCat
| DOI
| Download (ext.)
F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.
2022 | Journal Article | LibreCat-ID: 31035 |
Model droplet formation in extensional filament stretching within a Filament Extension Atomizer
M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).
LibreCat
| DOI
| Download (ext.)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).
2022 | Conference Abstract | LibreCat-ID: 37424
A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat
| Files available
J. Beimdiek, H.-J. Schmid, in: 2022.
2022 | Journal Article | LibreCat-ID: 35729
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
LibreCat
| Download (ext.)
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 6 (2022) 18–19.
2022 | Journal Article | LibreCat-ID: 35724
Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
LibreCat
| Download (ext.)
M.J. Rüther, S.H. Klippstein, S. Ponusamy, S. Jesinghausen, H.-J. Schmid, Werkstoffe 5 (2022) 28–29.
2022 | Conference Paper | LibreCat-ID: 37436
Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation)
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
LibreCat
| Files available
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, H.-J. Schmid, in: 13th World Filtration Congress Proceedings, 2022.
2022 | Conference Abstract | LibreCat-ID: 37426
A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster)
J. Beimdiek, H.-J. Schmid, in: IAC 2022 Book of Abstacts, 2022.
LibreCat
| Files available
J. Beimdiek, H.-J. Schmid, in: IAC 2022 Book of Abstacts, 2022.
2022 | Conference Abstract | LibreCat-ID: 37432
Novel entrained flow SCR using online synthesized catalyst particles (Poster)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat
| Files available
J. Beimdiek, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 37430
Novel entrained flow SCR using online synthesized catalyst particles in flue gas cleaning systems (Presentation)
J. Beimdiek, H.-J. Schmid, in: 2022.
LibreCat
J. Beimdiek, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 41160
Triggering instabilities of polymer solution suspensions under uniaxial extension (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat
| Files available
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 41158
Instability analysis of suspensions with a polymer solution matrix (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat
| Files available
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 33695
Flowability of polymer powders at elevated temperatures for additive manufacturing
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.
LibreCat
M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein, H.-J. Schmid (Eds.), 2022.
2022 | Conference Abstract | LibreCat-ID: 43238
A novel correction method for the shear rate in a couette rheometer (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat
| Files available
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 43243
Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster)
T. Rüther, H.-J. Schmid, in: 2022.
LibreCat
| Files available
T. Rüther, H.-J. Schmid, in: 2022.
2022 | Conference Abstract | LibreCat-ID: 43240
NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
LibreCat
| Files available
T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.
2022 | Journal Article | LibreCat-ID: 30228
Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.
LibreCat
| DOI
S.H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, H.-J. Schmid, JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 74 (2022) 1149–1157.
2022 | Conference Paper | LibreCat-ID: 33356 |
Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
LibreCat
| Download (ext.)
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, Austin, TX, USA, 2022.
2022 | Journal Article | LibreCat-ID: 44468
A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges
S. Schmidt, M. Gräßer, H.-J. Schmid, SIAM Journal on Scientific Computing 44 (2022) B1175–B1194.
LibreCat
| DOI
S. Schmidt, M. Gräßer, H.-J. Schmid, SIAM Journal on Scientific Computing 44 (2022) B1175–B1194.
2022 | Journal Article | LibreCat-ID: 44469
Low Temperature Laser Sintering with PA12 and PA6 on a Standard System
D. Menge, H.-J. Schmid, Macromolecular Symposia 404 (2022).
LibreCat
| DOI
D. Menge, H.-J. Schmid, Macromolecular Symposia 404 (2022).
2022 | Conference Paper | LibreCat-ID: 30220 |
Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, R. Gawlikowicz, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
2022 | Conference Paper | LibreCat-ID: 32874 |
Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2022.
2021 | Journal Article | LibreCat-ID: 25142
Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures
C. Kummert, H.-J. Schmid, L. Risse, G. Kullmer, Journal of Materials Research (2021).
LibreCat
| DOI
C. Kummert, H.-J. Schmid, L. Risse, G. Kullmer, Journal of Materials Research (2021).
2021 | Conference Paper | LibreCat-ID: 23760 |
Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12
D. Menge, H.-J. Schmid, in: 2021.
LibreCat
| Download (ext.)
D. Menge, H.-J. Schmid, in: 2021.
2021 | Conference Abstract | LibreCat-ID: 30364
Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann, R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: Paderborn, 2021.
LibreCat
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann, R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: Paderborn, 2021.
2021 | Misc | LibreCat-ID: 24202
Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention
S. Pawelczyk, S. Jesinghausen, H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention, Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
LibreCat
| Files available
S. Pawelczyk, S. Jesinghausen, H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention, Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
2021 | Conference Abstract | LibreCat-ID: 30225
Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester
M.J. Rüther, D. Schulze, H.-J. Schmid, in: digital, 2021.
LibreCat
M.J. Rüther, D. Schulze, H.-J. Schmid, in: digital, 2021.
2021 | Journal Article | LibreCat-ID: 26095
Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections
S. Schumacher, C. Asbach, H.-J. Schmid, Gefahrstoffe (2021) 16–28.
LibreCat
| DOI
S. Schumacher, C. Asbach, H.-J. Schmid, Gefahrstoffe (2021) 16–28.
2021 | Conference Abstract | LibreCat-ID: 27551
Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation)
J. Ludwig, C. Kykal, H.-J. Schmid, in: The Aerosol Society (Ed.), Book of Abstracts for the 2021 European Aerosol Conference, 2021.
LibreCat
| Files available
J. Ludwig, C. Kykal, H.-J. Schmid, in: The Aerosol Society (Ed.), Book of Abstracts for the 2021 European Aerosol Conference, 2021.
2021 | Conference Abstract | LibreCat-ID: 27553
Synthese und asymmetrische Funktionalisierung von submikronen Janus-Polymer-Partikeln in der Gasphase (Poster)
J. Ludwig, H.-J. Schmid, in: 2021.
LibreCat
J. Ludwig, H.-J. Schmid, in: 2021.
2021 | Conference Abstract | LibreCat-ID: 24475
Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2021.
LibreCat
| Files available
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2021.
2021 | Conference Abstract | LibreCat-ID: 30221
Filament Extension Atomization – A novel Process for Powder Production? (Presentation)
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2021.
LibreCat
| Files available
M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2021.
2021 | Conference Paper | LibreCat-ID: 24160 |
Laser Sintering Design Guidelines for media transmitting Components
I. Kletetzka, C. Kummert, H.-J. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2021.
LibreCat
| DOI
| Download (ext.)
I. Kletetzka, C. Kummert, H.-J. Schmid, in: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2021.
2020 | Report | LibreCat-ID: 24943
Additive Leichtbaustrukturen für die Flugzeugkabine
D. Menge, S.H. Klippstein, H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
LibreCat
| Download (ext.)
D. Menge, S.H. Klippstein, H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine, 2020.
2020 | Journal Article | LibreCat-ID: 24241
An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output
D.B. Rasche, L. Tigges, H.-J. Schmid, Review of Scientific Instruments 91 (2020) 055104.
LibreCat
| DOI
D.B. Rasche, L. Tigges, H.-J. Schmid, Review of Scientific Instruments 91 (2020) 055104.
2020 | Conference Paper | LibreCat-ID: 22182
Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens
C. Kummert, W. Diekmann, K. Tews, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735–744.
LibreCat
| DOI
C. Kummert, W. Diekmann, K. Tews, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2020, pp. 735–744.
2020 | Conference Abstract | LibreCat-ID: 25062
Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann , R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, 2020.
LibreCat
| Files available
R. Tischendorf, H.-J. Schmid, M. Bieber, M. Reddemann , R. Kneer, F. Fröde, T. Grenga, H. Pitsch, in: 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, 2020.
2020 | Journal Article | LibreCat-ID: 21949 |
Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries
M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo, M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova, S. Jesinghausen, C. Klein, H.-W. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk, U. Pott, N.W. Radebe, J.J. Riedmiller, H.-J. Schmid, W. Schmidt, E. Secrieru, D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures (2020).
LibreCat
| DOI
| Download (ext.)
M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo, M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova, S. Jesinghausen, C. Klein, H.-W. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk, U. Pott, N.W. Radebe, J.J. Riedmiller, H.-J. Schmid, W. Schmidt, E. Secrieru, D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures (2020).
2020 | Journal Article | LibreCat-ID: 21948 |
Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, H.-J. Schmid, Materials (2020).
LibreCat
| DOI
| Download (ext.)
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, H.-J. Schmid, Materials (2020).
2019 | Report | LibreCat-ID: 24628
FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen
D. Menge, R. Walter, H.-J. Schmid, U.P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, Frankfurt, 2019.
LibreCat
D. Menge, R. Walter, H.-J. Schmid, U.P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, Frankfurt, 2019.
2019 | Book Chapter | LibreCat-ID: 26098
Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges
H.-J. Schmid, G. Grundmeier, M. Dörmann, A.G. Orive, T. de los Arcos, B. Torun, in: Particles in Contact, Cham, 2019.
LibreCat
| DOI
H.-J. Schmid, G. Grundmeier, M. Dörmann, A.G. Orive, T. de los Arcos, B. Torun, in: Particles in Contact, Cham, 2019.
2019 | Conference Paper | LibreCat-ID: 22198
Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019.
LibreCat
| DOI
S.H. Klippstein, H.-J. Schmid, in: Proceedings of the 16th Rapid.Tech Conference, 2019.
2019 | Conference Abstract | LibreCat-ID: 24515
Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements
R. Tischendorf, M. Bieber, R. Kneer, H.-J. Schmid, in: PARTEC 2019 International Congress on Particle Technology, 2019.
LibreCat
| Files available
R. Tischendorf, M. Bieber, R. Kneer, H.-J. Schmid, in: PARTEC 2019 International Congress on Particle Technology, 2019.
2019 | Conference Paper | LibreCat-ID: 22202
Devolopment, Production and post-processing of a topology optimized aircraft bracket
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932–1945.
LibreCat
| Download (ext.)
S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 1932–1945.
2019 | Journal Article | LibreCat-ID: 22541
Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers
I. Giner, B. Torun, Y. Han, B. Duderija, D. Meinderink, A.G. Orive, M.T. de los Arcos de Pedro, C. Weinberger, M. Tiemann, H.-J. Schmid, G. Grundmeier, Applied Surface Science (2019) 873–879.
LibreCat
| DOI
I. Giner, B. Torun, Y. Han, B. Duderija, D. Meinderink, A.G. Orive, M.T. de los Arcos de Pedro, C. Weinberger, M. Tiemann, H.-J. Schmid, G. Grundmeier, Applied Surface Science (2019) 873–879.
2018 | Journal Article | LibreCat-ID: 26103
Representative domain size for the simulation of coalescence filtration in nonwoven and foam media
S. Abishek, A.J.C. King, J. Schuler, G. Kasper, H.-J. Schmid, B.J. Mullins, Separation and Purification Technology (2018) 344–352.
LibreCat
| DOI
S. Abishek, A.J.C. King, J. Schuler, G. Kasper, H.-J. Schmid, B.J. Mullins, Separation and Purification Technology (2018) 344–352.
2018 | Conference Paper | LibreCat-ID: 22183 |
Topology Optimized Heat Transfer Using the Example of an Electronic Housing
D. Menge, P. Delfs, M. Töws, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 687–697.
LibreCat
| Download (ext.)
D. Menge, P. Delfs, M. Töws, H.-J. Schmid, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 687–697.
2018 | Journal Article | LibreCat-ID: 22196
Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung
C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials Society 70 (2018) 425–430.
LibreCat
| DOI
C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials Society 70 (2018) 425–430.
2018 | Patent | LibreCat-ID: 29824
Bestimmung von Nanopartikeleigenschaften eines Aerosols
H.-J. Schmid, D. Rasche, (2018).
LibreCat
| Files available
H.-J. Schmid, D. Rasche, (2018).
2017 | Book Chapter | LibreCat-ID: 26104
Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613
J. Lohn, H.-J. Schmid, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, 2017.
LibreCat
| DOI
J. Lohn, H.-J. Schmid, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, 2017.
2017 | Journal Article | LibreCat-ID: 26106
Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity
J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, L. Colombi Ciacchi, The Journal of Physical Chemistry C (2017) 15294–15303.
LibreCat
| DOI
J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, L. Colombi Ciacchi, The Journal of Physical Chemistry C (2017) 15294–15303.
2017 | Journal Article | LibreCat-ID: 26107
Distance-dependency of capillary bridges in thermodynamic equilibrium
M. Dörmann, H.-J. Schmid, Powder Technology (2017) 175–183.
LibreCat
| DOI
M. Dörmann, H.-J. Schmid, Powder Technology (2017) 175–183.
2017 | Book Chapter | LibreCat-ID: 23759
Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen
D. Menge, S. Josupeit, P. Delfs, H.-J. Schmid, in: H.A. Richard, B. Schramm, T. Zipsner (Eds.), Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017, pp. 105–120.
LibreCat
| DOI
D. Menge, S. Josupeit, P. Delfs, H.-J. Schmid, in: H.A. Richard, B. Schramm, T. Zipsner (Eds.), Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, Wiesbaden, 2017, pp. 105–120.
2017 | Journal Article | LibreCat-ID: 22195
Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories
S. Josupeit, H.-J. Schmid, Journal of Applied Polymer Science 134 (2017).
LibreCat
| DOI
S. Josupeit, H.-J. Schmid, Journal of Applied Polymer Science 134 (2017).
2016 | Journal Article | LibreCat-ID: 26109
Modelling of temperatures and heat flow within laser sintered part cakes
S. Josupeit, L. Ordia, H.-J. Schmid, Additive Manufacturing (2016) 189–196.
LibreCat
| DOI
S. Josupeit, L. Ordia, H.-J. Schmid, Additive Manufacturing (2016) 189–196.
2016 | Journal Article | LibreCat-ID: 26111
Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer
H.-J. Schmid, S. Pieper, Applied Rheology (2016).
LibreCat
| DOI
H.-J. Schmid, S. Pieper, Applied Rheology (2016).
2016 | Journal Article | LibreCat-ID: 26118
Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
LibreCat
| DOI
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
2016 | Book | LibreCat-ID: 27443
Additive Fertigung
J. Gausemeier, M. Schmidt, R. Anderl, H.-J. Schmid, C. Leyens, G. Seliger, M. Karg, M. Kage, Additive Fertigung, acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.
LibreCat
J. Gausemeier, M. Schmidt, R. Anderl, H.-J. Schmid, C. Leyens, G. Seliger, M. Karg, M. Kage, Additive Fertigung, acatech - Deutsche Akademie der Technikwissenschaften, München, 2016.
2016 | Conference Paper | LibreCat-ID: 22180
Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.
LibreCat
| DOI
S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.
2016 | Journal Article | LibreCat-ID: 22185
Optimized build orientation of additive manufactured parts for improved surface quality and build time
P. Delfs, M. Tows, H.-J. Schmid, Additive Manufacturing 2 (2016) 214–320.
LibreCat
| DOI
P. Delfs, M. Tows, H.-J. Schmid, Additive Manufacturing 2 (2016) 214–320.
2016 | Conference Paper | LibreCat-ID: 22190
Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.
LibreCat
| DOI
P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference, 2016, pp. 411–414.
2016 | Conference Paper | LibreCat-ID: 22194
Thermal properties of polyamide 12 powder for application in laser sintering
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology (PARTEC) , 2016.
2016 | Conference Paper | LibreCat-ID: 22200
Dimensional accuracy of polymer laser sintered parts: Influences and measures
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat
| DOI
S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J. Schmid, in: Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
2016 | Conference Paper | LibreCat-ID: 22404
Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine
S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016.
LibreCat
| DOI
S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann, F. Quattrone, B. Ponick, in: EDPC 2016, 2016.
2016 | Conference Paper | LibreCat-ID: 22408
Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International Solid Freeform Fabrication Symposium , 2016.
2016 | Journal Article | LibreCat-ID: 21947
Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows
S. Jesinghausen, R. Weiffen, H.-J. Schmid, Experiments in Fluids (2016).
LibreCat
| DOI
| Download (ext.)
S. Jesinghausen, R. Weiffen, H.-J. Schmid, Experiments in Fluids (2016).
2016 | Journal Article | LibreCat-ID: 25140
Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
LibreCat
| DOI
S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016) 1–7.
2016 | Book (Editor) | LibreCat-ID: 26113
Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures
W. Kniffka, M. Eichmann, G. Witt, S. Josupeit, P. Delfs, T. Lieneke, G. Adam, H.-J. Schmid, eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures, München, 2016.
LibreCat
| DOI
W. Kniffka, M. Eichmann, G. Witt, S. Josupeit, P. Delfs, T. Lieneke, G. Adam, H.-J. Schmid, eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures, München, 2016.
2015 | Journal Article | LibreCat-ID: 26108
Evaluation of the Efficiency of Filtration Processes Using Precoat Materials
S. Schiller, C. Hellmich, H.-J. Schmid, Chemical Engineering & Technology (2015) 491–498.
LibreCat
| DOI
S. Schiller, C. Hellmich, H.-J. Schmid, Chemical Engineering & Technology (2015) 491–498.
2015 | Book Chapter | LibreCat-ID: 26119
Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols
J.V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, U.A. Peuker, in: Colloid Process Engineering, Cham, 2015.
LibreCat
| DOI
J.V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, U.A. Peuker, in: Colloid Process Engineering, Cham, 2015.
2015 | Journal Article | LibreCat-ID: 26121
Bipolar charge distribution of a soft X-ray diffusion charger
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, H.-J. Schmid, Journal of Aerosol Science (2015) 77–86.
LibreCat
| DOI
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, H.-J. Schmid, Journal of Aerosol Science (2015) 77–86.
2015 | Journal Article | LibreCat-ID: 26122
On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations
L. Tigges, A. Jain, H.-J. Schmid, Journal of Aerosol Science (2015) 119–134.
LibreCat
| DOI
L. Tigges, A. Jain, H.-J. Schmid, Journal of Aerosol Science (2015) 119–134.
2015 | Journal Article | LibreCat-ID: 26123
Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials
S. Schiller, H.-J. Schmid, Powder Technology (2015) 96–105.
LibreCat
| DOI
S. Schiller, H.-J. Schmid, Powder Technology (2015) 96–105.
2015 | Journal Article | LibreCat-ID: 26124
Simulation of Capillary Bridges between Particles
M. Dörmann, H.-J. Schmid, Procedia Engineering (2015) 14–23.
LibreCat
| DOI
M. Dörmann, H.-J. Schmid, Procedia Engineering (2015) 14–23.
2015 | Conference Paper | LibreCat-ID: 22178
Mass finishing of laser sintered parts
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.
LibreCat
| DOI
P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 514–526.
2015 | Conference Paper | LibreCat-ID: 22179
Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.
LibreCat
| DOI
S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.
2015 | Conference Paper | LibreCat-ID: 22187
Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.
LibreCat
| DOI
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.
2015 | Conference Paper | LibreCat-ID: 22189
Surface roughness optimized alignment of parts for additive manufacturing processes
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.
LibreCat
| DOI
P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.
2015 | Conference Paper | LibreCat-ID: 22199
Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.
LibreCat
| DOI
S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.