Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
253 Publications
1778 | Book | LibreCat-ID: 22111
Reschetnik, W., Brüggemann, J. P., Kullmer, G., & Risse, L. (n.d.). Beeinflussung des Risswachstums durch Kerben in additiv gefertigten Strukturen. Additive Fertigung von Bauteilen und Strukturen – Neue Erkenntnisse und Praxisbeispiele.
LibreCat
1778 | Book | LibreCat-ID: 22114
Riemer, A., Leuders, S., Richard, H. A., & Kullmer, G. (n.d.). Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe.
LibreCat
2010 | Journal Article | LibreCat-ID: 22355
Adam, G., & Zimmer, D. (2010). Konstruktionsregeln für additive Fertigung in Lehre und Forschung. Newsletter Berliner Kreis, 15, 22–23. https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
LibreCat
| DOI
2010 | Conference Paper | LibreCat-ID: 22050
Bagsik, A., Schöppner, V., & Klemp, E. (2010). FDM Part Quality Manufactured with ULTEM 9085. Proceedings of International Conference Polymeric Materials. https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 22188
Rüsenberg, S., Schmidt, L., & Schmid, H.-J. (2011). Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts. In 22th Annual International Solid Freeform Fabrication Symposium (Vol. 22, pp. 239–251). http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf
LibreCat
| DOI
2011 | Book | LibreCat-ID: 22191
Rüsenberg, S., Schmidt, L., Hosse, H., & Schmid, H.-J. (2011). Porosity as a key to increase material properties of laser sintered parts (pp. 531–538). https://doi.org/10.1201/b11341
LibreCat
| DOI
2011 | Book | LibreCat-ID: 22358
Adam, G., & Zimmer, D. (2011). Direct Manufacturing Design Rules (pp. 545–551). CRC Press. https://doi.org/10.1201/b11341-88
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 22360
Zimmer, D., & Adam, G. (2011). DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen Konstruktionsregeln. In Rapid.Tech 2011 Fachmesse und Anwendertagung für Rapid-Technologie.
LibreCat
2011 | Conference Paper | LibreCat-ID: 22029
Bagsik, A., & Schöppner, V. (2011). Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. ANTEC, 1294–1298. https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22174
Rüsenberg, S., Weiffen, R., Knoop, F., & Schmid, H.-J. (2012). Controlling the Quality of Laser Sintered Parts Along the Process Chain. In 23rd Annual International Solid Freeform Fabrication Symposium (Vol. 23, pp. 1024–1044). http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22204
Rüsenberg, S., & Schmid, H.-J. (2012). Mechanical Properties as a Result of multitude of Parameters. In The European Forum on Additive Manufacturing (Vol. 17). https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22364
Adam, G., & Zimmer, D. (2012). Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung.
LibreCat
2012 | Conference Paper | LibreCat-ID: 21680
Lindemann, C., Jahnke, U., Moi, M., & Koch, R. (2012). Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing. In 23rd Annual International Solid Freeform Fabrication Symposium (Vol. 23, pp. 177–188). http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22016
Bagsik, A., Schöppner, V., & Klemp, E. (2012). Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085. 23rd Annual International Solid Freeform Fabrication Symposium, 23, 629–640. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22164
Bagsik, A., Schöppner, V., & Klemp, E. (2012). Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. 1st International Conference on Thermo-Mechanically Graded Materials, 1, 129–134.
LibreCat
2012 | Conference Paper | LibreCat-ID: 22024
Bagsik, A., Schöppner, V., & Klemp, E. (2012). Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085. 5th International Conference on Polymer and Mould Innovations, 5, 266–272. https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22175
Josupeit, S., Rüsenberg, S., & Schmid, H.-J. (2013). A material-based quality concept for polymer laser sintering. In 24th Annual International Solid Freeform Fabrication Symposium (Vol. 24, pp. 44–54). http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22192
Rüsenberg, S., & Schmid, H.-J. (2013). Advanced characterization method of Nylon 12 materials for application in laser sinter processing. In International Conference of the Polymer-Processing-Society (PPS) (Vol. 29). https://doi.org/10.1063/1.4873877
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22197
Josupeit, S., Rüsenberg, S., & Schmid, H.-J. (2013). Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien. In Merseburger Rapid Prototyping Forum (Vol. 7). https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22201
Rüsenberg, S., Bagsik, A., Büsching, J., & Schmid, H.-J. (2013). Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie. In RapidTech.
LibreCat
2013 | Conference Paper | LibreCat-ID: 22373
Adam, G., & Zimmer, D. (2013). Design for additive manufacturing.
LibreCat
2013 | Journal Article | LibreCat-ID: 22374
Adam, G., & Zimmer, D. (2013). Konstruktionsregeln für additive Fertigungsverfahren . Konstruktion, 7(8), 77–82. https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22375
Adam, G. (2013). Die Potentiale additiver Fertigung nutzen.
LibreCat
2013 | Conference Paper | LibreCat-ID: 22376
Adam, G. (2013). Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre.
LibreCat
2013 | Conference Paper | LibreCat-ID: 21682
Lindemann, C., Jahnke, U., Moi, M., & Koch, R. (2013). Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs. In 24th Annual International Solid Freeform Fabrication Symposium (Vol. 24, pp. 998–1008). http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22017
Fischer, M., & Schöppner, V. (2013). Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling. 24th Annual International Solid Freeform Fabrication Symposium, 24, 805–815. http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22176
Delfs, P., Herale, A. A., Li, Z., & Schmid, H.-J. (2014). Simulation of the Surface Topography on Laser Sintered Polymer Parts. In 25th Annual International Solid Freeform Fabrication Symposium (Vol. 25, pp. 1250–1258). http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22177
Josupeit, S., & Schmid, H.-J. (2014). Three-dimensional in-process temperature measurement of laser sintered part cakes. In 25th Annual International Solid Freeform Fabrication Symposium (Vol. 25, pp. 49–58). http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22184
Josupeit, S., Rüsenberg, S., Rupp, N., Gessler, M., & Schmid, H.-J. (2014). Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics. In 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014) (Vol. 72, pp. 2383–2385). https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 22186
Rüsenberg, S., Josupeit, S., & Schmid, H.-J. (2014). A method to characterize the quality of a polymer laser sintering process . Advances in Mechanical Engineering, 6, 1687–8140. https://doi.org/10.1155/2014/185374
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22193
Josupeit, S., Ordia, L., & Schmid, H.-J. (2014). Development of a Basic Model to Simulate the Laser Sintering Cooling Process. In International Conference on Additive Technologies (Vol. 5, pp. 222–227). https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22203
Delfs, P., & Schmid, H.-J. (2014). Simulation of the Surface Topography on Laser Sintered Polymer Parts. In 25th Annual International Solid Freeform Fabrication Symposium (Vol. 25, pp. 1250–1258). http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22382
Adam, G., & Zimmer, D. (2014). Extension of prior developed design rules (LS). In ASPE - Spring topical meeting 2014. https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22383
Adam, G., & Zimmer, D. (2014). Systematic investigations of minimum feature sizes and geometrical accuracies.
LibreCat
2014 | Journal Article | LibreCat-ID: 22384
Adam, G., & Zimmer, D. (2014). Design for Additive Manufacturing - Element transitions and aggregated structures. CIRP Journal of Manufacturing Science and Technology, 7(1), 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22385
Adam, G. (2014). Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22386
Adam, G. (2014). Extension of prior developed design rules for laser sintering.
LibreCat
2014 | Journal Article | LibreCat-ID: 21706
Deppe, G., & Koch, R. (2014). Exploring the influence of an Additive Manufacturing integration on future MRO processes in aeronautics. Rtejournal, 2014(11). https://www.rtejournal.de/ausgabe11/3958
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22018
Fischer, M., & Schöppner, V. (2014). Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy. 25th Annual International Solid Freeform Fabrication Symposium, 25, 923–934. http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22030
Fischer, M., & Schöppner, V. (2014). Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling. ANTEC, 2331–2336.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22021
Bagsik, A., Josupeit, S., Schöppner, V., & Klemp, E. (2014). Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling. 29th International Conference of the Polymer Processing Society, 29, 696–701. https://doi.org/10.1063/1.4873874
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 15965
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014). On the fatigue properties of metals manufactured by selective laser melting – The role of ductility. Journal of Materials Research, 1911–1919. https://doi.org/10.1557/jmr.2014.157
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22108
Reschetnik, W., Riemer, A., & Richard, H. A. (2015). Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 63–72).
LibreCat
2015 | Conference Paper | LibreCat-ID: 22166
Klemp, E. (2015). Industrial applications in AM - aerospace and overhaul. In ASME AM3D Conference and Expo.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22168
Klemp, E. (2015). Paradigmenwechsel mit Additiven Fertigungsverfahren - Möglichkeiten und Chancen. In Generatives Fertigen und 3D-Drucken: Industrielle Revolution oder Hype? Wissenschaftliches Kolloquium.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22169
Klemp, E. (2015). Möglichkeiten, Chancen und Mythen additiver Fertigung. In Hanse-Aerospace-Themennachmittag im Hause SLM.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22170
Klemp, E. (2015). Additive Manufacturing - Potenziale, Zukunftschancen und Hürden. In Messe Interzum.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22171
Klemp, E. (2015). Technology Update 2015 for Metals. In SLM-Usermeeting.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22172
Klemp, E. (2015). AM-Verfahren - Möglichkeiten in der industriellen Fertigung. In VDMA - Symposium auf der Hannover Messe Industrie.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22178
Delfs, P., Li, Z., & Schmid, H.-J. (2015). Mass finishing of laser sintered parts. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 514–526). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22179
Josupeit, S., & Schmid, H.-J. (2015). Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 190–199). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22187
Josupeit, S., Lohn, J., Hermann, E., Gessler, M., Tenbrink, S., & Schmid, H.-J. (2015). Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 540–549). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22189
Delfs, P., Toews, M., & Schmid, H.-J. (2015). Surface roughness optimized alignment of parts for additive manufacturing processes. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1334–1344). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22199
Josupeit, S., Tutzschky, S., Gessler, M., & Schmid, H.-J. (2015). Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates. In Proceedings of the Rapid Tech 2015 (pp. 63–78). Springer Vieweg. https://doi.org/10.1007/978-3-662-48473-9_5
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 22394
dell’Aere, G., & Zimmer, D. (2015). On design for Additive Manufacturing - evaluating geometrical limitations. Rapid Prototyping Journal, 21(6), 662–670. https://doi.org/10.1108/RPJ-06-2013-0060
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22395
Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer, D. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In Proceedings of the Rapid Tech 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22396
Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer, D. (2015). Systematical determination of tolerances for additive manufacturing by measuring linear dimensions. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 371–384). https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22398
Adam, G. (2015). On tolerances for additive manufacturing. In Inside 3D Printing Conference and Expo.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22399
Lieneke, T. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In Rapid Tech 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22400
Lieneke, T. (2015). Systematical determination of dimensional tolerances for additive manufacturing . In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26).
LibreCat
2015 | Conference Paper | LibreCat-ID: 21683
Lindemann, C., Jahnke, U., Reiher, T., & Koch, R. (2015). Towards a sustainable and economic selection of part candidates for Additive Manufacturing. In Rapid Prototyping Journal (Vol. 21, pp. 216–227). Emerald. https://doi.org/10.1108/RPJ-12-2014-0179
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21684
Deppe, G., Lindemann, C., & Koch, R. (2015). Developement of an economic decision support for the application of Additive Manufacturing in aerospace. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1560–1563). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21685
Jahnke, U., Büsching, J., Reiher, T., & Koch, R. (2015). Protection measures against product piracy and application by the use of AM. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1601–1611). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21686
Reiher, T., & Koch, R. (2015). FE-Optimization and data handling for Additive Manufacturing of structural parts. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1092–1103). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21700
Jahnke, U., & Lindemann, C. (2015). Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy. In Inside 3D Printing Conference and Expo.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21701
Deppe, G., Reiher, T., & Koch, R. (2015). Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing. In International Conference Production Engineering and Management 2015 (Vol. 5, pp. 219–230). https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21703
Lindemann, C., Reiher, T., & Koch, R. (2015). Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing. In Paris Space Week.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22031
Knoop, F., & Schöppner, V. (2015). Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30. ASPE Spring Topical Meeting, 26–31. https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22044
Knoop, F., & Schöppner, V. (2015). Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12. 26th Annual International Solid Freeform Fabrication Symposium, 26, 935–948. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22107
Brüggemann, J. P., Reschetnik, W., Richard, H. A., Kullmer, G., & Schramm, B. (2016). Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus. In Rapid Tech - International Trade Show & Conference for Additive Manufacturing (pp. 290–300). https://doi.org/10.3139/9783446450608.025
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22109
Reschetnik, W., Grylls, R., Bauer, B., Richard, H. A., & Kullmer, G. (2016). Fatigue Life Manipulation of SLM Parts.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22128
Brüggemann, J. P., Riemer, A., Reschetnik, W., Aydinöz, M. E., Kullmer, G., Richard, H. A., & Schaper, M. (2016). Optimierung von Fahrradtretkurbeln mittels additiver Fertigung. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 101–112).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22130
Reschetnik, W., Brüggemann, J. P., Aydinöz, M. E., Kullmer, G., Richard, H. A., & Schaper, M. (2016). Lebensdauerbeeinflussung durch Additive Fertigung. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 131–140).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22132
Riemer, A., Leuders, L., Kullmer, G., & Richard, H. A. (2016). Materialkennwerte lasergeschmolzener Werkstoffe. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 161–174).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22146
Reschetnik, W., Brüggemann, J. P., Aydinöz, M. E., Grydin, O., Hoyer, K. P., Kullmer, G., & Richard, H. A. (2016). Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. In Procedia Structural Integrity (pp. 3040–3048).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22149
Riemer, A., & Richard, H. A. (2016). Crack Propagation in Additive Manufactured Materials and Structures. In Procedia Structural Integrity (pp. 1229–1236).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22180
Josupeit, S., Delfs, P., Menge, D., & Schmid, H.-J. (2016). Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures. In 27th Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 2077–2086). http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22185
Delfs, P., Tows, M., & Schmid, H.-J. (2016). Optimized build orientation of additive manufactured parts for improved surface quality and build time. Additive Manufacturing, 2(12, Part B), 214–320. https://doi.org/10.1016/j.addma.2016.06.003
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22190
Delfs, P., & Schmid, H.-J. (2016). Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts . In Fraunhofer Direct Digital Manufacturing Conference (Vol. 3, pp. 411–414). https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22194
Josupeit, S., & Schmid, H.-J. (2016). Thermal properties of polyamide 12 powder for application in laser sintering. In International Congress on Particle Technology (PARTEC) .
LibreCat
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, S., Delfs, P., Lieneke, T., Adam, G., Gessler, M., Pfisterer, H., & Schmid, H.-J. (2016). Dimensional accuracy of polymer laser sintered parts: Influences and measures. In Rapid Tech - International Trade Show & Conference for Additive Manufacturing (pp. 107–120). https://doi.org/10.3139/9783446450608.009
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22403
Künneke, T., & Zimmer, D. (2016). Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. In DVM Tagung - Additiv gefertigte Bauteile und Strukturen (pp. 151–160).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22404
Lammers, S., Adam, G., Schmid, H.-J., Mrozek, R., Oberacker, R., Hoffmann, M., … Ponick, B. (2016). Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine. In EDPC 2016. https://doi.org/10.1109/EDPC.2016.7851312
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, S., Delfs, P., Lieneke, T., & Schmid, H.-J. (2016). Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain. In 27th Annual International Solid Freeform Fabrication Symposium .
LibreCat
2016 | Conference Paper | LibreCat-ID: 22409
Lieneke, T., de Groot, S., Adam, G., & Zimmer, D. (2016). Dimensional tolerances for additive manufacturing: Experimental investigation of manufacturing accuracy for selective laser melting. In ASPE 2016 Summer Topical Meeting (p. S.9-15).
LibreCat
2016 | Conference Paper | LibreCat-ID: 22410
Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the Dimensional Accuracy - Investigations for FDM. In ASPE Spring Topical Meeting (p. S.3-8). https://doi.org/10.3139/9783446454606.004
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22411
Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the Dimensional Accuracy - Investigations for FDM. In Summer Topical Meeting 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22412
Lieneke, T., Denzer, V., Adam, G., & Zimmer, D. (2016). Dimensional tolerances for additive manufacturing: Experimental investigation for Fused Deposition Modeling. In CAT 2016 (Vol. 43, pp. 286–291). https://doi.org/10.1016/j.procir.2016.02.361
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21687
Deppe, G., & Koch, R. (2016). Supporting the Decision Process for applying Additive Manufacturing in the MRO Aerospace Business by MADM. In 27th Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 81–92). http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21688
Reiher, T., & Koch, R. (2016). Product optimization with and for Additive Manufacturing. In 27th Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 2236–2249). http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21689
Lindemann, C., & Koch, R. (2016). Cost Efficient Design and Planning for Additive Manufacturing Technologies. In 27th Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 93–112). http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf
LibreCat
| DOI
2016 | Book | LibreCat-ID: 21698
Lindemann, C., Deppe, G., & Koch, R. (2016). Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag.
LibreCat
2016 | Book | LibreCat-ID: 21699
Jahnke, U., & Koch, R. (2016). Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag.
LibreCat
2016 | Conference Paper | LibreCat-ID: 21702
Reiher, T., Deppe, G., & Koch, R. (2016). Combining material efficiency and part reliability by product optimization applying additive manufacturing. In International Conference Production Engineering and Management 2016 (Vol. 6, pp. 27–38). https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21705
Deppe, G., & Koch, R. (2016). Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung. In Rapid Tech 2016 (Vol. 13, pp. 349–360). Hanser Verlag. https://doi.org/10.3139/9783446450608.031
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21997
Gräßler, I., Taplick, P., Pottebaum, J., Scholle, P., & Reiher, T. (2016). Data Management for additive manufacturing: survey on requirements and current state. In 14th International DESIGN Conference 2016 (Vol. 14). https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22019
Fischer, M., & Schöppner, V. (2016). Fatigue Behavior of FDM Parts Manufactured with Ultem 9085. 27th Annual International Solid Freeform Fabrication Symposium , 27, 563–568. https://doi.org/10.1007/s11837-016-2197-2
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22025
Moritzer, E., Hirsch, A., Günther, K., Teutoburg-Weiss, S., Lasagni, A. F., Klotzbach, U., & Sonntag, F. (2016). Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme. 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ, 6, 65–70.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22039
Fischer, M., Seewald, O., & Schöppner, V. (2016). Chemical Surface Treatment of Ultem 9085 Parts. Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 121–133. https://doi.org/10.3139/9783446450608.010
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., Ahlers, D., & Tröster, T. (2016). Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer , (5).
LibreCat