Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
198 Publications
2014 | Conference Paper | LibreCat-ID: 9889
Sprock, C., & Sextro, W. (2014). Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending. In Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International (pp. 320–324). https://doi.org/10.1109/I2MTC.2014.6860760
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9890
Sprock, C., & Sextro, W. (2014). Time-efficient analysis of nonlinear dynamic behavior. In Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, (pp. 293–294).
LibreCat
2014 | Conference Paper | LibreCat-ID: 9891
Sprock, C., & Sextro, W. (2014). Time-efficient analysis of nonlinear peak bending behavior. In Proceedings of ISMA - International Conference of Noise and Vibration. 2014 (pp. 1–8).
LibreCat
2014 | Conference Paper | LibreCat-ID: 9892
Sprock, C., & Sextro, W. (2014). Vibration Analysis of Mechanical Structures using Multisine Excitation Techniques. In Proceedings of 31st Danubia-Adria Symposium. 2014.
LibreCat
2014 | Book Chapter | LibreCat-ID: 9893
Trächtler, A., Hölscher, C., Rasche, C., Priesterjahn, C., Zimmer, D., Henning Keßler, J., … Sextro, W. (2014). Introduction to Self-optimization and Dependability. In J. Gausemeier, F. Josef Rammig, W. Schäfer, & W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems (pp. 1–24). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-53742-4_1
LibreCat
| DOI
2014 | Book Chapter | LibreCat-ID: 9894
Trächtler, A., Kleinjohann, B., Heinzemann, C., Rasche, C., Priesterjahn, C., Steenken, D., … Schäfer, W. (2014). Case Study. In J. Gausemeier, F. Josef Rammig, W. Schäfer, & W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems (pp. 173–188). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-53742-4_4
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9895
Unger, A., Sextro, W., Althoff, S., Eichwald, P., Meyer, T., Eacock, F., & Brökelmann, M. (2014). Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds. In Proceedings of the 47th International Symposium on Microelectronics (IMAPS) (pp. 289–294). San Diego, CA, US.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9896
Unger, A., Sextro, W., Althoff, S., Meyer, T., Brökelmann, M., Neumann, K., … Bolowski, D. (2014). Data-driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding. In Proceedings of 8th International Conference on Integrated Power Electronic Systems (Vol. 141, pp. 175–180).
LibreCat
2013 | Conference Paper | LibreCat-ID: 26973
Meyer, T., Kessler, J. H., Sextro, W., & Trächtler, A. (2013). Increasing Intelligent Systems’ Reliability by using Reconfiguration. The Annual Reliability and Maintainability Symposium (RAMS).
LibreCat
2013 | Book Chapter | LibreCat-ID: 23139
Kessler, J. H., Meyer, T., Sextro, W., Sondermann-Wölke, C., & Trächtler, A. (2013). Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept. In Dependability of Self-Optimizing Mechatronic Systems (pp. 55–62). Springer-Verlag, Heidelberg, Germany.
LibreCat
2013 | Conference Paper | LibreCat-ID: 23140
Meyer, T., Kessler, J. H., Sextro, W., & Trächtler, A. (2013). Increasing Intelligent Systems’ Reliability by using Reconfiguration. In The Annual Reliability and Maintainability Symposium (RAMS).
LibreCat
2013 | Book Chapter | LibreCat-ID: 23149
Hölscher, C., Kessler, J. H., Meyer, T., Rasche, C., Reinold, P., Sextro, W., … Zimmer, D. (2013). Applications of Self-Optimizing Systems. In Dependability of Self-Optimizing Mechatronic Systems (pp. 16–22). Springer-Verlag, Heidelberg, Germany.
LibreCat
2013 | Journal Article | LibreCat-ID: 9794
Al-Ashtari, W., Hunstig, M., Hemsel, T., & Sextro, W. (2013). Increasing the power of piezoelectric energy harvesters by magnetic stiffening. Journal of Intelligent Material Systems and Structures, 24(11), 1332–1342. https://doi.org/10.1177/1045389X13483021
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9795
Al-Ashtari, W., Hunstig, M., Hemsel, T., & Sextro, W. (2013). Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments. Sensors and Actuators A: Physical, 200, 138–146. https://doi.org/10.1016/j.sna.2013.01.008
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9796
Al-Ashtari, W., Hunstig, M., Hemsel, T., & Sextro, W. (2013). Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems. In Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013 (pp. 159–161). Hannover, Germany.
LibreCat
2013 | Conference Paper | LibreCat-ID: 9797
Althoff, S., Neuhaus, J., Hemsel, T., & Sextro, W. (2013). A friction based approach for modeling wire bonding. In IMAPS 2013, 46th International Symposium on Microelectronics. Orlando (Florida), USA. https://doi.org/10.4071/isom-2013-TA67
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9799
Eichwald, P., Sextro, W., Althoff, S., Eacock, F., Schnietz, M., Guth, K., & Brökelmann, M. (2013). Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding. In 15th Electronics Packaging Technology Conference. https://doi.org/10.1109/EPTC.2013.6745803
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9801
Hunstig, M., Al-Ashtari, W., Hemsel, T., & Sextro, W. (2013). Leistungs- und Bandbreitensteigerung von Energy-Harvesting-Generatoren für Energieautarke Systeme. In J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, & A. Trächtler (Eds.), 9. Paderborner Workshop Entwurf mechatronischer Systeme (pp. 359–372). Paderborn: Heinz Nixdorf Institut, Universität Paderborn.
LibreCat
2013 | Conference Paper | LibreCat-ID: 9802
Hunstig, M., Hemsel, T., & Sextro, W. (2013). High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation. In Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop (pp. 16–18). Hannover, Germany.
LibreCat
2013 | Journal Article | LibreCat-ID: 9803
Hunstig, M., Hemsel, T., & Sextro, W. (2013). Modelling the friction contact in an inertia motor. Journal of Intelligent Material Systems and Structures, 24(11), 1380–1391. https://doi.org/10.1177/1045389X12474354
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9804
Hunstig, M., Hemsel, T., & Sextro, W. (2013). Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation. Sensors and Actuators A: Physical, 200, 79–89. https://doi.org/10.1016/j.sna.2012.11.043
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9805
Hunstig, M., Hemsel, T., & Sextro, W. (2013). Stick-slip and slip-slip operation of piezoelectric inertia drives - Part I: Ideal Excitation. Sensors and Actuators A: Physical, 200, 90–100. https://doi.org/10.1016/j.sna.2012.11.012
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9807
Kimotho, J. K., Sondermann-Wölke, C., Meyer, T., & Sextro, W. (2013). Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization. Chemical Engineering Transactions, 33, 619–624. https://doi.org/10.3303/CET1333104
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9808
Kimotho, J. K., Sondermann-Wölke, C., Meyer, T., & Sextro, W. (2013). Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation. International Journal of Prognostics and Health Management, 4(2).
LibreCat
2013 | Conference Paper | LibreCat-ID: 9855
Kohl, S., Zuber, A., & Sextro, W. (2013). Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems. In Proc. Appl. Math. Mech. (Vol. 13, pp. 23–24). https://doi.org/10.1002/pamm.201310007
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9858
Meyer, T., Hölscher, C., Menke, M., Sextro, W., & Zimmer, D. (2013). Multiobjective Optimization including Safety of Operation Applied to a Linear Drive System. In Proc. Appl. Math. Mech. (Vol. 13, pp. 483–484). https://doi.org/10.1002/pamm.201310234
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9859
Meyer , T., Henning Keßler, J., Sextro, W., & Trächtler, A. (2013). Increasing Intelligent Systems’ Reliability by Using Reconfiguration. In Proceedings of the Annual Reliability and Maintainability Symposium (RAMS). Orlando, FL. https://doi.org/10.1109/RAMS.2013.6517636
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9860
Meyer, T., Sondermann-Wölke, C., Kimotho, J. K., & Sextro, W. (2013). Controlling the Remaining Useful Lifetime using Self-Optimization. Chemical Engineering Transactions, 33, 625–630. https://doi.org/10.3303/CET1333105
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9861
Meyer, T., Sondermann-Wölke, C., Sextro, W., Riedl, M., Gouberman, A., & Siegle, M. (2013). Bewertung der Zuverlässigkeit selbstoptimierender Systeme mit dem LARES-Framework. In J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, & A. Trächtler (Eds.), 9. Paderborner Workshop Entwurf mechatronischer Systeme (pp. 161–174). Paderborn: Heinz Nixdorf Institut, Universität Paderborn.
LibreCat
2012 | Journal Article | LibreCat-ID: 9781
Al-Ashtari, W., Hunstig, M., Hemsel, T., & Sextro, W. (2012). Frequency tuning of piezoelectric energy harvesters by magnetic force. Smart Materials and Structures, 21(3), 035019.
LibreCat
2012 | Journal Article | LibreCat-ID: 9782
Al-Ashtari, W., Hunstig, M., Hemsel, T., & Sextro, W. (2012). Analytical determination of characteristic frequencies and equivalent circuit parameters of a piezoelectric bimorph. Journal of Intelligent Material Systems and Structures, 23(1), 15–23. https://doi.org/10.1177/1045389X11430742
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 9783
Bornmann, P., Hemsel, T., Sextro, W., Maeda, T., & Morita, T. (2012). Non-perturbing cavitation detection / monitoring in sonochemical reactors. In Ultrasonics Symposium (IUS), 2012 IEEE International (pp. 1141–1144). https://doi.org/10.1109/ULTSYM.2012.0284
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 9787
Kohl, S., Sextro, W., & Zuber, A. (2012). Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie. In 8. Tag des Fahrwerks, Aachen, 2012 (pp. 38–60). Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen.
LibreCat
2012 | Conference Paper | LibreCat-ID: 9791
Sondermann-Wölke , C., Meyer, T., Dorociak, R., Gausemeier, J., & Sextro, W. (2012). Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution. In Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012). Helsinki, Finland.
LibreCat
2012 | Journal Article | LibreCat-ID: 9806
Hunstig, M., Hemsel, T., & Sextro, W. (2012). Analysis of different operation modes for inertia motors. ACTUATOR 2012 Conference Proceedings, 761–764.
LibreCat
2011 | Conference Paper | LibreCat-ID: 26981
Sondermann-Wölke, C., Sextro, W., Reinold, P., & Trächtler, A. (2011). Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. Technische Zuverlässigkeit TTZ.
LibreCat
2011 | Conference Paper | LibreCat-ID: 23184
Lurye, O., Sondermann-Wölke, C., Kromov, I., Sextro, W., & Trächtler, A. (2011). Verlässlichkeitsanalyse des Degradationsverhaltens mechatronischer Systeme mit mehreren Betriebsstrategien. In VDI Bericht zur Tagung Technische Zuverlässigkeit. Leonberg: VDI-Verlag.
LibreCat
2011 | Conference Paper | LibreCat-ID: 23194
Sondermann-Wölke, C., Sextro, W., Reinold, P., & Trächtler, A. (2011). Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In Technische Zuverlässigkeit TTZ.
LibreCat
2011 | Conference Paper | LibreCat-ID: 9768
Lurie, O., Kromov, I., Trächtler, A., Sondermann-Wölke, C., & Sextro, W. (2011). Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies. In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte (pp. 99–110). Leonberg.
LibreCat
2011 | Conference Paper | LibreCat-ID: 9771
Sondermann-Wölke, C., Sextro, W., Reinold, P., & Trächtler, A. (2011). Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte (pp. 291–302). Leonberg.
LibreCat
2011 | Journal Article | LibreCat-ID: 9772
Tomberger, C., Dietmaier, P., Sextro, W., & Six, K. (2011). Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature. Wear, 271, 2–12. https://doi.org/10.1016/j.wear.2010.10.025
LibreCat
| DOI
2011 | Patent | LibreCat-ID: 9790
Sextro, W., Hunstig, M., Bornmann, P., & Hemsel, T. (2011). Patent DE10201003395: Anordnung und Verfahren zur mehrdimensionalen Messung von Schwingungen eines Objekts. .
LibreCat
2010 | Journal Article | LibreCat-ID: 9747
Hölzl, J. S., & Sextro, W. (2010). Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen. PAMM, 10(1), 247–248. https://doi.org/10.1002/pamm.201010116
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9748
Hölzl, J. S., & Sextro, W. (2010). Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces. SAE International Journal of Passenger Cars- Mechanical Systems, 929–935. https://doi.org/10.4271/2010-01-1422
LibreCat
| DOI
2010 | Conference Paper | LibreCat-ID: 9753
Hunstig, M., Hemsel, T., & Sextro, W. (2010). Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren. In J. Gausemeier, F. Rammig, W. Schäfer, & A. Trächtler (Eds.), 7. Paderborner Workshop Entwurf mechatronischer Systeme (Vol. 272, pp. 129–141). Paderborn: Heinz Nixdorf Institut, Universität Paderborn.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9754
Hunstig, M., Hemsel, T., & Sextro, W. (2010). Improving the Performance of Piezoelectric Inertia Motors. In ACTUATOR 2010 Conference Proceedings (pp. 657–661).
LibreCat
2010 | Conference Paper | LibreCat-ID: 9760
Sondermann-Wölke, C., Hemsel, T., Sextro, W., Gausemeier, J., & Pook, S. (2010). Guideline for the dependability-oriented design of self-optimizing systems. In Industrial Informatics (INDIN), 2010 8th IEEE International Conference on (pp. 739–744). https://doi.org/10.1109/INDIN.2010.5549490
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9761
Sondermann-Wölke, C., & Sextro, W. (2010). Integration of Condition Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance Module. International Journal On Advances in Intelligent Systems, 3(1–3), 65–74.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9762
Sondermann-Wölke, C., Sextro, W., Geisler, J., & Trächtler, A. (2010). Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls. In J. Gausemeier, F. J. Rammig, & A. Trächtler (Eds.), Entwurf mechatronischer Systeme (Vol. 272, pp. 411–420). Paderborn.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9763
Sondermann-Wölke, C., Geisler, J., & Sextro, W. (2010). Increasing the reliability of a self-optimizing railway guidance system. In Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual (pp. 1–6). https://doi.org/10.1109/RAMS.2010.5448080
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9764
Tomberger, C., Dietmaier, P., Martin, R., Sextro, W., & Six, K. (2010). Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den Kraftschluss zwischen Rad und Schiene. ZEVrail, 134, 127–135.
LibreCat
2009 | Conference Paper | LibreCat-ID: 9742
Sondermann-Wölke, C., & Sextro, W. (2009). Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules. In Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World: (pp. 15–20). https://doi.org/10.1109/ComputationWorld.2009.47
LibreCat
| DOI
2007 | Conference Paper | LibreCat-ID: 9560
Tonchev, A., Hirschberg, W., Sextro, W., Major, Z., & Neges, J. (2007). Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe. In 27. Internationales Mju-Symposium/Bremsen-Fachtagung (pp. 29–49). Bad Neuenahr: VDI Verlag GmbH.
LibreCat
2007 | Conference Paper | LibreCat-ID: 9561
Tonchev, A., Hirschberg, W., Sextro, W., Major, Z., & Neges, J. (2007). Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc. In 27. Internationales Mju-Symposium/Bremsen-Fachtagung (pp. 144–163). Bad Neuenahr: VDI Verlag GmbH.
LibreCat
2007 | Conference Paper | LibreCat-ID: 9563
Genzo, A., Sextro, W., & Panning, L. (2007). Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten. In VDI-Berichte (Vol. 2022, pp. 147–161). Düsseldorf: VDI Verlag GmbH.
LibreCat
2007 | Journal Article | LibreCat-ID: 9567
Szwedowicz, J., Visser, R., Sextro, W., & Masserey, P. A. (2007). On Nonlinear Forced Vibration of Shrouded Turbine Blades. Journal of Turbomachinery, 130(1), 011002–011002.
LibreCat
2006 | Conference Paper | LibreCat-ID: 9535
Genzo, A., & Sextro, W. (2006). Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts. In Proceedings of ISMA - International conference on noise and vibration engineering (pp. 51–52).
LibreCat
2006 | Book Chapter | LibreCat-ID: 9536
Gutzeit, F., Sextro, W., & Kröger, M. (2006). Unsteady rolling contact of rubber wheels. In P. Wriggers & U. Nackenhorst (Eds.), Analysis and Simulation of Contact Problems (Vol. 27, pp. 261–270). Springer Berlin Heidelberg. https://doi.org/10.1007/3-540-31761-9_29
LibreCat
| DOI
2006 | Conference Paper | LibreCat-ID: 9542
Hofmeisterro, A., Sextro, W., & Röschel, O. (2006). Error-Workspace Analysis of Plane Mechanisms. In Proceedings of EUCOMES, the first European Conference on Mechanism Science (pp. 1–12). Obergurgl, {\"O}sterreich.
LibreCat
2006 | Book Chapter | LibreCat-ID: 9551
Sextro, W., Moldenhauer, P., Wangenheim, M., Lindner, M., & Kröger, M. (2006). Contact behaviour of a sliding rubber element. In P. Wriggers & U. Nackenhorst (Eds.), Analysis and Simulation of Contact Problems (Vol. 27, pp. 243–252). Springer Berlin Heidelberg. https://doi.org/10.1007/3-540-31761-9_27
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9266
Genzo, A., Sextro, W., & Popp, K. (2005). Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts. PAMM, 5(1), 91–92. https://doi.org/10.1002/pamm.200510026
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9526
Genzo, A., Sextro, W., & Popp, K. (2005). Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts. PAMM, 5(1), 91–92. https://doi.org/10.1002/pamm.200510026
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9529
Hofmeister, A., Sextro, W., & Röschel, O. (2005). Unkontrollierbare Bewegungen ebener Mechanismen mit Gelenkspiel. PAMM, 5(1), 201–202. https://doi.org/10.1002/pamm.200510078
LibreCat
| DOI
2004 | Conference Paper | LibreCat-ID: 8952
Götting, F., Sextro, W., Panning, L., & Popp, K. (2004). Systematic mistuning of bladed disk assemblies with friction contacts. In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air (Vol. 6, pp. 257–267).
LibreCat
2004 | Journal Article | LibreCat-ID: 9520
Lindner, M., Sextro, W., & Popp, K. (2004). Hysteretic Friction of a Sliding Rubber Element. PAMM, 4(1), 101–102. https://doi.org/10.1002/pamm.200410032
LibreCat
| DOI
2004 | Conference Paper | LibreCat-ID: 9523
Panning, L., Popp, K., Sextro, W., & Götting, F. (2004). Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application. In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air (Vol. 6, pp. 269–280). Vienna, Austria. https://doi.org/10.1115/GT2004-53316
LibreCat
| DOI
2003 | Conference Paper | LibreCat-ID: 8933
Götting, F., Sextro, W., Panning, L., & Popp, K. (2003). Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen. In H. Irretier , R. Nordmann, & H. Springer (Eds.), Schwingungen in rotierenden Maschinen VI SIRM, Referate der Tagung in Darmstadt (pp. 201–210). Vieweg-Verlag.
LibreCat
2003 | Journal Article | LibreCat-ID: 8934
Genzo, A., Sextro, W., & Popp, K. (2003). Erzwungene Schwingungen von elastischen Mehrkörpersystemen mit Reibkontakten. PAMM, 2(1), 120–121. https://doi.org/10.1002/pamm.200310046
LibreCat
| DOI
2003 | Journal Article | LibreCat-ID: 8937
Panning, L., Sextro, W., & Popp, K. (2003). Design of Friction Dampers for Mistuned Bladed Disks. PAMM, 3(1), 118–119. https://doi.org/10.1002/pamm.200310336
LibreCat
| DOI
2003 | Journal Article | LibreCat-ID: 8938
Panning, L., Sextro, W., & Popp, K. (2003). Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers. International Journal of Rotating Machinery, 9(3), 219–228.
LibreCat
2003 | Journal Article | LibreCat-ID: 8939
Popp, K., Panning, L., & Sextro, W. (2003). Vibration Damping by Friction Forces -Theory and Applications. Journal of Vibration and Control, 9, 419–448.
LibreCat
2003 | Conference Paper | LibreCat-ID: 8940
Sextro, W., & Popp, K. (2003). Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen am Beispiel von Turbomaschinenschaufeln. In Forschungsvereinigung Verbrennungskraftmaschinen (FW) (p. 40). Frankfurt am Main, Germany.
LibreCat
2003 | Conference Paper | LibreCat-ID: 8941
Szwedowicz, J., Sextro, W., Visser, R., & Masserey, P. . (2003). On forced vibration of shrouded turbine blades. In ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference. Atlanta, Georgia, USA. https://doi.org/doi:10.1115/GT2003-38808
LibreCat
| DOI
2002 | Conference Paper | LibreCat-ID: 8928
Panning, L., Sextro, W., & Popp, K. (2002). Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with respect to Friction Damping. In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8929
Panning, L., Sextro, W., & Popp, K. (2002). Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers. In Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC. Honolulu, Hawaii, USA.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8931
Sextro, W., Panning, L., & Götting, F. (2002). Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts. In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8932
Sextro, W., & Popp, K. (2002). Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen. In Forschungsvereinigung Verbrennungskraftmaschinen (FW) - lnformationstagung Turbinen (pp. 157–183). Frankfurt am Main, Germany.
LibreCat
2001 | Conference Paper | LibreCat-ID: 8921
Panning, L., Sextro, W., & Popp, K. (2001). Schwingungsanalyse verstimmter Schaufelkränze mit Reibelementen. In H. Irretier, R. Nordmann, & H. Springer (Eds.), Schwingungen in rotierenden Maschinen VI SIRM, Referate der Tagung in Wien (pp. 297–306). Vieweg-Verlag.
LibreCat
2001 | Journal Article | LibreCat-ID: 8922
Sextro, W. (2001). Heat and Wear Generation for Rolling Contacts. Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), 81, 225–226.
LibreCat
2001 | Conference Paper | LibreCat-ID: 8923
Sextro, W. (2001). Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction. In ASME Design Engineering Technical Conferences (pp. 1–12). Pittsburgh, Pennsylvania, USA.
LibreCat
2001 | Journal Article | LibreCat-ID: 8924
Sextro, W., Popp, K., & Krzyzynski, T. (2001). Localization in Nonlinear Mistuned Systems with Cyclic Symmetry. Nonlinear Dynamics, 25(1–3), 207–220. https://doi.org/10.1023/A:1012915002568
LibreCat
| DOI
2000 | Journal Article | LibreCat-ID: 8918
Krzyzynski, T., Popp, K., & Sextro, W. (2000). On some regularities in dynamic response of cyclic periodic structures. Chaos, Solitons \& Fractals, 11(10), 1597–1609. https://doi.org/10.1016/S0960-0779(99)00080-6
LibreCat
| DOI
2000 | Conference Paper | LibreCat-ID: 8919
Panning, L., Sextro, W., & Popp, K. (2000). Optimization of Interblade Friction Damper. In International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME (pp. 1–8). Munich, Germany.
LibreCat
2000 | Conference Paper | LibreCat-ID: 8920
Sextro, W. (2000). The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification. In International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME (pp. 1–8). Munich, Germany.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8909
Popp, K., & Sextro, W. (1999). Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz. In Forschungsvereinigung Verbrennungskraftmaschinen (FW) -lnformationstagung Turbinen (pp. 21–38). Heidelberg.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8910
Sextro, W. (1999). Experimental verification of a non-Hertzian contact model. In International conference on computational methods in contact mechanics (pp. 181–190).
LibreCat
1999 | Conference Paper | LibreCat-ID: 8911
Sextro, W. (1999). Forced Vibration of Elastic Structures with Friction Contacts. In ASME Design Engineering Technical Conferences (pp. 1–10). Las Vegas, Nevada, USA.
LibreCat
1999 | Journal Article | LibreCat-ID: 8912
Sextro, W., & Popp, K. (1999). Ein ebenes Reibkontaktmodell zur Berechnung von Schaufelschwingungen mit Reibelementen. Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), 79, 311–312.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8913
Sextro, W., & Popp, K. (1999). Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz. In Forschungsvereinigung Verbrennungskraftmaschinen (FW) (p. 56). Frankfurt am Main, Germany.
LibreCat
1998 | Conference Paper | LibreCat-ID: 8907
Sextro, W., Popp, K., & Wolter, I. (1998). Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers. In International Congress on Combustion Engines, Proceedings of the 22nd CIMAC (Vol. 1, pp. 257–270). Kopenhagen, D{\"a}nemark.
LibreCat
1998 | Conference Paper | LibreCat-ID: 8908
Sextro, W., Popp, K., & Wolter, I. (1998). Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers. In The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7 (Vol. B, pp. 621–630). Honolulu, Hawaii, USA.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8902
Popp, K., & Sextro, W. (1997). Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen. In Forschungsvereinigung Verbrennungskraftmaschinen (FW) -lnformationstagung Turbinen (pp. 131–142). Frankfurt am Main, Germany.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8903
Sextro, W. (1997). Schwingungsverhalten von Schaufelkränzen mit Reibelementen bei Frequenzverstimmung. In VDI-Reihe (Vol. 11). VDI-Verlag, Düsseldorf.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8904
Sextro, W., Popp, K., & Wolter, I. (1997). Improved reliability of bladed disks due to friction dampers. In The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition.
LibreCat
1996 | Conference Paper | LibreCat-ID: 8896
Popp, K., & Sextro, W. (1996). Schwingungsverhalten eines Schaufelkranzes mit Reibelementen bei Frequenzverstimmung. In Forschungsvereinigung Verbrennungskraftmaschinen (FW) - lnformationstagung Turbinen (pp. 53–76). Frankfurt am Main, Germany.
LibreCat
1996 | Conference Paper | LibreCat-ID: 8897
Popp, K., & Sextro, W. (1996). Dynamical Behaviour of a Bladed Disk with Friction Dampers. In The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH (Vol. 1, pp. 157–183). Prag.
LibreCat
1993 | Journal Article | LibreCat-ID: 8895
Sextro, W., & Schmalhorst, B. (1993). Static Behaviour of Drill Strings in Curved Boreholes. Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), 73, 255–257.
LibreCat
1991 | Book Chapter | LibreCat-ID: 8894
Stelter, P., & Sextro, W. (1991). Bifurcations in Dynamic Systems with Dry Friction. In R. Seydel, F. W. Schneider, T. Küpper, & H. Troger (Eds.), Bifurcation and Chaos: Analysis, Algorithms, Applications (Vol. 97, pp. 343–347). Birkhäuser Basel. https://doi.org/10.1007/978-3-0348-7004-7_44
LibreCat
| DOI