Kay-Peter Hoyer

Fakultät für Maschinenbau
Werkstoffkunde
hoyer@lwk.uni-paderborn.de
ID
48411

99 Publications

Mark all

[99]
2024 | Journal Article | LibreCat-ID: 52738
Milaege D, Eschemann N, Hoyer K-P, Schaper M. Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion. Crystals. 2024;14(2). doi:10.3390/cryst14020117
LibreCat | DOI
 
[98]
2023 | Journal Article | LibreCat-ID: 41492
Pramanik S, Andreiev A, Hoyer K-P, et al. Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy. Powders. 2023;2(1):59-74. doi:10.3390/powders2010005
LibreCat | DOI
 
[97]
2023 | Book Chapter | LibreCat-ID: 45360
Haase M, Bieber M, Tasche F, et al. Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors. In: Kynast M, Eichmann M, Witt G, eds. Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023. Carl Hanser Verlag GmbH & Co. KG; 2023.
LibreCat
 
[96]
2023 | Journal Article | LibreCat-ID: 44078
Andreiev A, Hoyer K-P, Hengsbach F, et al. Powder bed fusion of soft-magnetic iron-based alloys with high silicon content. Journal of Materials Processing Technology. 2023;317. doi:10.1016/j.jmatprotec.2023.117991
LibreCat | DOI
 
[95]
2023 | Journal Article | LibreCat-ID: 46503
Pramanik S, Hoyer K-P, Schaper M. Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples. Rapid Prototyping Journal. 2023;29(6):1257-1269. doi:10.1108/rpj-06-2022-0190
LibreCat | DOI
 
[94]
2023 | Journal Article | LibreCat-ID: 46507
Pramanik S, Milaege D, Hein M, Andreiev A, Schaper M, Hoyer K-P. An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. Advanced Engineering Materials. 2023;25(14). doi:10.1002/adem.202201850
LibreCat | DOI
 
[93]
2023 | Book Chapter | LibreCat-ID: 46870
Menge D, Milaege D, Hoyer K-P, Schmid H-J, Schaper M. Case Study IV: Individualized Medical Technology using Additive Manufacturing. In: Horwath I, Schweizer S, eds. Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag; 2023. doi:10.14361/9783839463772-007
LibreCat | DOI
 
[92]
2023 | Journal Article | LibreCat-ID: 47122
Pramanik S, Krüger JT, Schaper M, Hoyer K-P. Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution. Metallurgical and Materials Transactions A. Published online 2023. doi:10.1007/s11661-023-07186-7
LibreCat | DOI
 
[91]
2023 | Journal Article | LibreCat-ID: 49107
Pramanik S, Milaege D, Hein M, Hoyer K-P, Schaper M. Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach. Crystals. 2023;13(11). doi:10.3390/cryst13111592
LibreCat | DOI
 
[90]
2023 | Journal Article | LibreCat-ID: 47535
Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing. 2023;7(5). doi:10.3390/jmmp7050169
LibreCat | DOI
 
[89]
2022 | Journal Article | LibreCat-ID: 32188
Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. Materials. 2022;15(12). doi:10.3390/ma15124072
LibreCat | DOI
 
[88]
2022 | Journal Article | LibreCat-ID: 30519
Pramanik S, Tasche F, Hoyer K-P, Schaper M. Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study. Magnetism. 2022;2:88-104. doi:10.3390/magnetism2020007
LibreCat | DOI
 
[87]
2022 | Journal Article | LibreCat-ID: 40154
Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4):185. doi:10.3390/jfb13040185
LibreCat | DOI
 
[86]
2022 | Journal Article | LibreCat-ID: 29196 | OA
Hein M, Kokalj D, Lopes Dias NF, et al. Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications. Metals. 2022;12(1). doi:10.3390/met12010122
LibreCat | Files available | DOI | Download (ext.)
 
[85]
2022 | Journal Article | LibreCat-ID: 33723
Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4). doi:10.3390/jfb13040185
LibreCat | DOI
 
[84]
2022 | Journal Article | LibreCat-ID: 31076
Tillmann W, Lopes Dias NF, Kokalj D, et al. Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications. Materials Letters. Published online 2022. doi:10.1016/j.matlet.2022.132384
LibreCat | DOI
 
[83]
2022 | Journal Article | LibreCat-ID: 31075
Teng Z, Wu H, Pramanik S, et al. Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel. Advanced Engineering Materials. Published online 2022. doi:10.1002/adem.202200022
LibreCat | DOI
 
[82]
2022 | Journal Article | LibreCat-ID: 33498
Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. Advanced Engineering Materials. Published online 2022. doi:https://doi.org/10.1002/adem.202201008
LibreCat | DOI
 
[81]
2022 | Journal Article | LibreCat-ID: 41497
Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study. Crystals. 2022;12(9). doi:10.3390/cryst12091217
LibreCat | DOI
 
[80]
2022 | Journal Article | LibreCat-ID: 41494
Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4). doi:10.3390/jfb13040185
LibreCat | DOI
 
[79]
2022 | Journal Article | LibreCat-ID: 41499
Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. Materials. 2022;15(12). doi:10.3390/ma15124072
LibreCat | DOI
 
[78]
2022 | Journal Article | LibreCat-ID: 41496
Hein M, Lopes Dias NF, Kokalj D, et al. On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy. International Journal of Fatigue. 2022;166. doi:10.1016/j.ijfatigue.2022.107235
LibreCat | DOI
 
[77]
2022 | Journal Article | LibreCat-ID: 32332
Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387. doi:10.1016/j.jmrt.2022.06.006
LibreCat | DOI
 
[76]
2022 | Journal Article | LibreCat-ID: 41498
Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387. doi:10.1016/j.jmrt.2022.06.006
LibreCat | DOI
 
[75]
2022 | Journal Article | LibreCat-ID: 41495
Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications. Materials Science and Engineering: A. 2022;854. doi:10.1016/j.msea.2022.143887
LibreCat | DOI
 
[74]
2022 | Journal Article | LibreCat-ID: 41500
Hein M, Lopes Dias NF, Pramanik S, et al. Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion. Materials. 2022;15(11). doi:10.3390/ma15113774
LibreCat | DOI
 
[73]
2022 | Journal Article | LibreCat-ID: 41503
Pramanik S, Tasche F, Hoyer K-P, Schaper M. Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study. Magnetism. 2022;2(2):88-104. doi:10.3390/magnetism2020007
LibreCat | DOI
 
[72]
2022 | Journal Article | LibreCat-ID: 41501
Tillmann W, Lopes Dias NF, Kokalj D, et al. Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications. Materials Letters. 2022;321. doi:10.1016/j.matlet.2022.132384
LibreCat | DOI
 
[71]
2022 | Journal Article | LibreCat-ID: 30103
Huang J, Orive AG, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200:110186. doi:10.1016/j.corsci.2022.110186
LibreCat | DOI
 
[70]
2022 | Journal Article | LibreCat-ID: 41502
Teng Z, Wu H, Pramanik S, et al. Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel. Advanced Engineering Materials. 2022;24(9). doi:10.1002/adem.202200022
LibreCat | DOI
 
[69]
2022 | Journal Article | LibreCat-ID: 41504
Huang J, Gonzalez Orive A, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200. doi:10.1016/j.corsci.2022.110186
LibreCat | DOI
 
[68]
2022 | Journal Article | LibreCat-ID: 41493
Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. Advanced Engineering Materials. Published online 2022. doi:10.1002/adem.202201008
LibreCat | DOI
 
[67]
2022 | Journal Article | LibreCat-ID: 33340 | OA
Hein M, Lopes Dias NF, Pramanik S, et al. Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion. Materials. Published online 2022.
LibreCat | Files available
 
[66]
2021 | Journal Article | LibreCat-ID: 41508
Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. 2021;831. doi:10.1016/j.msea.2021.142312
LibreCat | DOI
 
[65]
2021 | Journal Article | LibreCat-ID: 41511
Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2021;52(7):703-716. doi:10.1002/mawe.202000288
LibreCat | DOI
 
[64]
2021 | Journal Article | LibreCat-ID: 41507
Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. Rapid Prototyping Journal. 2021;28(5):833-840. doi:10.1108/rpj-01-2021-0017
LibreCat | DOI
 
[63]
2021 | Journal Article | LibreCat-ID: 41506
Heiland S, Milkereit B, Hoyer K-P, Zhuravlev E, Kessler O, Schaper M. Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. Materials. 2021;14(23). doi:10.3390/ma14237190
LibreCat | DOI
 
[62]
2021 | Journal Article | LibreCat-ID: 24790
Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
LibreCat | DOI
 
[61]
2021 | Journal Article | LibreCat-ID: 41516
Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology. 2021;421. doi:10.1016/j.surfcoat.2021.127384
LibreCat | DOI
 
[60]
2021 | Journal Article | LibreCat-ID: 41512
Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A. 2021;822. doi:10.1016/j.msea.2021.141662
LibreCat | DOI
 
[59]
2021 | Journal Article | LibreCat-ID: 41510
Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue. 2021;153. doi:10.1016/j.ijfatigue.2021.106498
LibreCat | DOI
 
[58]
2021 | Journal Article | LibreCat-ID: 41509
Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
LibreCat | DOI
 
[57]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology. Published online 2021. doi:10.1016/j.jmatprotec.2021.117183
LibreCat | DOI
 
[56]
2021 | Journal Article | LibreCat-ID: 41517
Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. 2021;30(11):8048-8056. doi:10.1007/s11665-021-06065-9
LibreCat | DOI
 
[55]
2021 | Journal Article | LibreCat-ID: 24243
Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology. Published online 2021. doi:10.1016/j.surfcoat.2021.127384
LibreCat | DOI
 
[54]
2021 | Journal Article | LibreCat-ID: 24086
Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2021;52:703-716. doi:10.1002/mawe.202000288
LibreCat | DOI
 
[53]
2021 | Journal Article | LibreCat-ID: 41514
Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. 2021;871. doi:10.1016/j.jallcom.2021.159544
LibreCat | DOI
 
[52]
2021 | Journal Article | LibreCat-ID: 41515
Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. 2021;46. doi:10.1016/j.addma.2021.102087
LibreCat | DOI
 
[51]
2021 | Journal Article | LibreCat-ID: 27700
Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.142312
LibreCat | DOI
 
[50]
2021 | Journal Article | LibreCat-ID: 24090
Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. Published online 2021. doi:10.1007/s11665-021-06065-9
LibreCat | DOI
 
[49]
2021 | Journal Article | LibreCat-ID: 27509
Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. Rapid Prototyping Journal. Published online 2021. doi:10.1108/rpj-01-2021-0017
LibreCat | DOI
 
[48]
2021 | Journal Article | LibreCat-ID: 24087
Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. Published online 2021. doi:10.1016/j.jallcom.2021.159544
LibreCat | DOI
 
[47]
2021 | Journal Article | LibreCat-ID: 23897
Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.141662
LibreCat | DOI
 
[46]
2021 | Journal Article | LibreCat-ID: 23911
Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue. Published online 2021. doi:10.1016/j.ijfatigue.2021.106498
LibreCat | DOI
 
[45]
2021 | Journal Article | LibreCat-ID: 24088
Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. Published online 2021. doi:10.1016/j.addma.2021.102087
LibreCat | DOI
 
[44]
2020 | Journal Article | LibreCat-ID: 41519
Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. 2020;29(6):1396-1409. doi:10.1007/s11666-020-01081-y
LibreCat | DOI
 
[43]
2020 | Journal Article | LibreCat-ID: 41518
Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. 2020;51(11):1452-1464. doi:10.1002/mawe.202000109
LibreCat | DOI
 
[42]
2020 | Journal Article | LibreCat-ID: 24100
Engelkemeier K, Lindner J, Bürger J, et al. Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology. 2020;31:095701. doi:10.1088/1361-6528/ab55bc
LibreCat | DOI
 
[41]
2020 | Journal Article | LibreCat-ID: 41520
Wu H, Bill T, Teng ZJ, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. 2020;794. doi:10.1016/j.msea.2020.139597
LibreCat | DOI
 
[40]
2020 | Journal Article | LibreCat-ID: 41521
Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. 2020;394. doi:10.1016/j.surfcoat.2020.125748
LibreCat | DOI
 
[39]
2020 | Journal Article | LibreCat-ID: 41522
Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. Materialwissenschaft und Werkstofftechnik. 2020;51(4):517-530. doi:10.1002/mawe.201900191
LibreCat | DOI
 
[38]
2020 | Journal Article | LibreCat-ID: 24254
Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. Published online 2020:1452-1464. doi:10.1002/mawe.202000109
LibreCat | DOI
 
[37]
2020 | Journal Article | LibreCat-ID: 24092
Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y
LibreCat | DOI
 
[36]
2020 | Journal Article | LibreCat-ID: 24255
Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y
LibreCat | DOI
 
[35]
2020 | Journal Article | LibreCat-ID: 24093
Wu H, Bill T, Teng Z, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. Published online 2020. doi:10.1016/j.msea.2020.139597
LibreCat | DOI
 
[34]
2020 | Journal Article | LibreCat-ID: 24094
Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. Published online 2020. doi:10.1016/j.surfcoat.2020.125748
LibreCat | DOI
 
[33]
2020 | Journal Article | LibreCat-ID: 24091
Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. Published online 2020:1452-1464. doi:10.1002/mawe.202000109
LibreCat | DOI
 
[32]
2020 | Journal Article | LibreCat-ID: 23896
Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. Materialwissenschaft und Werkstofftechnik. Published online 2020:517-530. doi:10.1002/mawe.201900191
LibreCat | DOI
 
[31]
2019 | Book Chapter | LibreCat-ID: 24097
Hoyer K-P, Schaper M. Alloy Design for Biomedical Applications in Additive Manufacturing. In: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. ; 2019. doi:10.1007/978-3-030-05861-6_44
LibreCat | DOI
 
[30]
2019 | Book Chapter | LibreCat-ID: 24098
Tasche L, Hoyer K-P, Zhuravlev E, Grundmeier G, Schaper M, Keßler O. Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry. In: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. ; 2019. doi:10.1007/978-3-030-05861-6_45
LibreCat | DOI
 
[29]
2019 | Book Chapter | LibreCat-ID: 41523
Tasche L, Hoyer K-P, Zhuravlev E, Grundmeier G, Schaper M, Keßler O. Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2019. doi:10.1007/978-3-030-05861-6_45
LibreCat | DOI
 
[28]
2019 | Journal Article | LibreCat-ID: 41524
Engelkemeier K, Lindner JKN, Bürger J, et al. Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology. 2019;31(9). doi:10.1088/1361-6528/ab55bc
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: 2018 IEEE Transportation Electrification Conference and Expo (ITEC). ; 2018. doi:10.1109/itec.2018.8450250
LibreCat | DOI
 
[26]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. 2018;3(4):221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 41528
Engelkemeier K, Mücke C, Hoyer K-P, Schaper M. Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates. Advanced Composites and Hybrid Materials. 2018;2(1):189-199. doi:10.1007/s42114-018-0071-0
LibreCat | DOI
 
[22]
2018 | Journal Article | LibreCat-ID: 41527
Engelkemeier K, Hoyer K-P, Schaper M. Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers. Materials Letters. 2018;236:752-756. doi:10.1016/j.matlet.2018.11.041
LibreCat | DOI
 
[21]
2018 | Journal Article | LibreCat-ID: 24107
Engelkemeier K, Mücke C, Hoyer K-P, Schaper M. Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates. Advanced Composites and Hybrid Materials. Published online 2018:189-199. doi:10.1007/s42114-018-0071-0
LibreCat | DOI
 
[20]
2018 | Journal Article | LibreCat-ID: 24106
Engelkemeier K, Hoyer K-P, Schaper M. Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers. Materials Letters. Published online 2018:752-756. doi:10.1016/j.matlet.2018.11.041
LibreCat | DOI
 
[19]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: 2018 IEEE Transportation Electrification Conference and Expo (ITEC). IEEE; 2018. doi:10.1109/itec.2018.8450250
LibreCat | DOI
 
[18]
2017 | Journal Article | LibreCat-ID: 24109
Wiesener M, Peters K, Taube A, et al. Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting. Materials and Corrosion. Published online 2017:1028-1036. doi:10.1002/maco.201709478
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 24117
Taube A, Reschetnik W, Pauli L, Hoyer K-P, Kullmer G, Schaper M. Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen. In: Additive Fertigung von Bauteilen und Strukturen. Springer Vieweg; 2017. doi:10.1007/978-3-658-17780-5_13
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 24119
Brüggemann J-P, Reschetnik W, Kullmer G, et al. Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, . In: Deutscher Verband für Materialforschung und -prüfung e.V., ed. DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen. ; 2017:11-22.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 41531
Wiesener M, Peters K, Taube A, et al. Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting. Materials and Corrosion. 2017;68(10):1028-1036. doi:10.1002/maco.201709478
LibreCat | DOI
 
[14]
2017 | Book Chapter | LibreCat-ID: 41529
Taube A, Reschetnik W, Pauli L, Hoyer K-P, Kullmer G, Schaper M. Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen. In: Additive Fertigung von Bauteilen Und Strukturen. Springer Fachmedien Wiesbaden; 2017. doi:10.1007/978-3-658-17780-5_13
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. Published online 2017:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat | DOI
 
[12]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. 2017;133:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 24111
Reschetnik W, Brüggemann J-P, Aydinöz ME, et al. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. Procedia Structural Integrity. Published online 2016:3040-3048. doi:10.1016/j.prostr.2016.06.380
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 41533
Reschetnik W, Brüggemann J-P, Aydinöz ME, et al. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. Procedia Structural Integrity. 2016;2:3040-3048. doi:10.1016/j.prostr.2016.06.380
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 41532
Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic pressing of IN718 components manufactured by selective laser melting. Additive Manufacturing. 2016;13:93-102. doi:10.1016/j.addma.2016.11.006
LibreCat | DOI
 
[8]
2016 | Journal Article | LibreCat-ID: 24110
Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic pressing of IN718 components manufactured by selective laser melting. Additive Manufacturing. Published online 2016:93-102. doi:10.1016/j.addma.2016.11.006
LibreCat | DOI
 
[7]
2015 | Journal Article | LibreCat-ID: 41534
Niendorf T, Brenne F, Hoyer K-P, et al. Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications. Metallurgical and Materials Transactions A. 2015;46(7):2829-2833. doi:10.1007/s11661-015-2932-2
LibreCat | DOI
 
[6]
2015 | Journal Article | LibreCat-ID: 24112
Niendorf T, Brenne F, Hoyer K-P, et al. Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications. Metallurgical and Materials Transactions A. Published online 2015:2829-2833. doi:10.1007/s11661-015-2932-2
LibreCat | DOI
 
[5]
2014 | Dissertation | LibreCat-ID: 24113
Hoyer K-P. Korrosionsuntersuchungen an experimentellen und technisch relevanten Magnesiumlegierungen. PZH-Verlag; 2014.
LibreCat
 
[4]
2014 | Journal Article | LibreCat-ID: 24114
Hoyer K-P, Angrisani GL, Klose C, Bach F-W, Hassel T. Influence of aluminium on the corrosion behaviour of binary magnesium-aluminium alloys in saline solutions. Materials and Corrosion. Published online 2014:23-30. doi:10.1002/maco.201206531
LibreCat | DOI
 
[3]
2013 | Journal Article | LibreCat-ID: 46510
Hoyer K-P, Angrisani GL, Klose C, Bach F-W, Hassel T. Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien. Materialwissenschaft und Werkstofftechnik. 2013;44(1):84-93. doi:10.1002/mawe.201300019
LibreCat | DOI
 
[2]
2012 | Journal Article | LibreCat-ID: 46512
Hoyer K-P, Hassel T, Bach F-W. Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen. Materialwissenschaft und Werkstofftechnik. 2012;43(12):1067-1073. doi:10.1002/mawe.201200921
LibreCat | DOI
 
[1]
2011 | Journal Article | LibreCat-ID: 46511
Waltz F, Swider MA, Hoyer K-P, et al. Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy. Journal of Materials Science. 2011;47(1):176-183. doi:10.1007/s10853-011-5785-0
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed

99 Publications

Mark all

[99]
2024 | Journal Article | LibreCat-ID: 52738
Milaege D, Eschemann N, Hoyer K-P, Schaper M. Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion. Crystals. 2024;14(2). doi:10.3390/cryst14020117
LibreCat | DOI
 
[98]
2023 | Journal Article | LibreCat-ID: 41492
Pramanik S, Andreiev A, Hoyer K-P, et al. Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy. Powders. 2023;2(1):59-74. doi:10.3390/powders2010005
LibreCat | DOI
 
[97]
2023 | Book Chapter | LibreCat-ID: 45360
Haase M, Bieber M, Tasche F, et al. Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors. In: Kynast M, Eichmann M, Witt G, eds. Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023. Carl Hanser Verlag GmbH & Co. KG; 2023.
LibreCat
 
[96]
2023 | Journal Article | LibreCat-ID: 44078
Andreiev A, Hoyer K-P, Hengsbach F, et al. Powder bed fusion of soft-magnetic iron-based alloys with high silicon content. Journal of Materials Processing Technology. 2023;317. doi:10.1016/j.jmatprotec.2023.117991
LibreCat | DOI
 
[95]
2023 | Journal Article | LibreCat-ID: 46503
Pramanik S, Hoyer K-P, Schaper M. Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples. Rapid Prototyping Journal. 2023;29(6):1257-1269. doi:10.1108/rpj-06-2022-0190
LibreCat | DOI
 
[94]
2023 | Journal Article | LibreCat-ID: 46507
Pramanik S, Milaege D, Hein M, Andreiev A, Schaper M, Hoyer K-P. An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. Advanced Engineering Materials. 2023;25(14). doi:10.1002/adem.202201850
LibreCat | DOI
 
[93]
2023 | Book Chapter | LibreCat-ID: 46870
Menge D, Milaege D, Hoyer K-P, Schmid H-J, Schaper M. Case Study IV: Individualized Medical Technology using Additive Manufacturing. In: Horwath I, Schweizer S, eds. Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag; 2023. doi:10.14361/9783839463772-007
LibreCat | DOI
 
[92]
2023 | Journal Article | LibreCat-ID: 47122
Pramanik S, Krüger JT, Schaper M, Hoyer K-P. Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution. Metallurgical and Materials Transactions A. Published online 2023. doi:10.1007/s11661-023-07186-7
LibreCat | DOI
 
[91]
2023 | Journal Article | LibreCat-ID: 49107
Pramanik S, Milaege D, Hein M, Hoyer K-P, Schaper M. Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach. Crystals. 2023;13(11). doi:10.3390/cryst13111592
LibreCat | DOI
 
[90]
2023 | Journal Article | LibreCat-ID: 47535
Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing. 2023;7(5). doi:10.3390/jmmp7050169
LibreCat | DOI
 
[89]
2022 | Journal Article | LibreCat-ID: 32188
Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. Materials. 2022;15(12). doi:10.3390/ma15124072
LibreCat | DOI
 
[88]
2022 | Journal Article | LibreCat-ID: 30519
Pramanik S, Tasche F, Hoyer K-P, Schaper M. Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study. Magnetism. 2022;2:88-104. doi:10.3390/magnetism2020007
LibreCat | DOI
 
[87]
2022 | Journal Article | LibreCat-ID: 40154
Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4):185. doi:10.3390/jfb13040185
LibreCat | DOI
 
[86]
2022 | Journal Article | LibreCat-ID: 29196 | OA
Hein M, Kokalj D, Lopes Dias NF, et al. Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications. Metals. 2022;12(1). doi:10.3390/met12010122
LibreCat | Files available | DOI | Download (ext.)
 
[85]
2022 | Journal Article | LibreCat-ID: 33723
Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4). doi:10.3390/jfb13040185
LibreCat | DOI
 
[84]
2022 | Journal Article | LibreCat-ID: 31076
Tillmann W, Lopes Dias NF, Kokalj D, et al. Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications. Materials Letters. Published online 2022. doi:10.1016/j.matlet.2022.132384
LibreCat | DOI
 
[83]
2022 | Journal Article | LibreCat-ID: 31075
Teng Z, Wu H, Pramanik S, et al. Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel. Advanced Engineering Materials. Published online 2022. doi:10.1002/adem.202200022
LibreCat | DOI
 
[82]
2022 | Journal Article | LibreCat-ID: 33498
Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. Advanced Engineering Materials. Published online 2022. doi:https://doi.org/10.1002/adem.202201008
LibreCat | DOI
 
[81]
2022 | Journal Article | LibreCat-ID: 41497
Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study. Crystals. 2022;12(9). doi:10.3390/cryst12091217
LibreCat | DOI
 
[80]
2022 | Journal Article | LibreCat-ID: 41494
Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials. 2022;13(4). doi:10.3390/jfb13040185
LibreCat | DOI
 
[79]
2022 | Journal Article | LibreCat-ID: 41499
Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio. Materials. 2022;15(12). doi:10.3390/ma15124072
LibreCat | DOI
 
[78]
2022 | Journal Article | LibreCat-ID: 41496
Hein M, Lopes Dias NF, Kokalj D, et al. On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy. International Journal of Fatigue. 2022;166. doi:10.1016/j.ijfatigue.2022.107235
LibreCat | DOI
 
[77]
2022 | Journal Article | LibreCat-ID: 32332
Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387. doi:10.1016/j.jmrt.2022.06.006
LibreCat | DOI
 
[76]
2022 | Journal Article | LibreCat-ID: 41498
Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387. doi:10.1016/j.jmrt.2022.06.006
LibreCat | DOI
 
[75]
2022 | Journal Article | LibreCat-ID: 41495
Pramanik S, Milaege D, Hoyer K-P, Schaper M. Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications. Materials Science and Engineering: A. 2022;854. doi:10.1016/j.msea.2022.143887
LibreCat | DOI
 
[74]
2022 | Journal Article | LibreCat-ID: 41500
Hein M, Lopes Dias NF, Pramanik S, et al. Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion. Materials. 2022;15(11). doi:10.3390/ma15113774
LibreCat | DOI
 
[73]
2022 | Journal Article | LibreCat-ID: 41503
Pramanik S, Tasche F, Hoyer K-P, Schaper M. Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study. Magnetism. 2022;2(2):88-104. doi:10.3390/magnetism2020007
LibreCat | DOI
 
[72]
2022 | Journal Article | LibreCat-ID: 41501
Tillmann W, Lopes Dias NF, Kokalj D, et al. Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications. Materials Letters. 2022;321. doi:10.1016/j.matlet.2022.132384
LibreCat | DOI
 
[71]
2022 | Journal Article | LibreCat-ID: 30103
Huang J, Orive AG, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200:110186. doi:10.1016/j.corsci.2022.110186
LibreCat | DOI
 
[70]
2022 | Journal Article | LibreCat-ID: 41502
Teng Z, Wu H, Pramanik S, et al. Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel. Advanced Engineering Materials. 2022;24(9). doi:10.1002/adem.202200022
LibreCat | DOI
 
[69]
2022 | Journal Article | LibreCat-ID: 41504
Huang J, Gonzalez Orive A, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. Corrosion Science. 2022;200. doi:10.1016/j.corsci.2022.110186
LibreCat | DOI
 
[68]
2022 | Journal Article | LibreCat-ID: 41493
Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. Advanced Engineering Materials. Published online 2022. doi:10.1002/adem.202201008
LibreCat | DOI
 
[67]
2022 | Journal Article | LibreCat-ID: 33340 | OA
Hein M, Lopes Dias NF, Pramanik S, et al. Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion. Materials. Published online 2022.
LibreCat | Files available
 
[66]
2021 | Journal Article | LibreCat-ID: 41508
Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. 2021;831. doi:10.1016/j.msea.2021.142312
LibreCat | DOI
 
[65]
2021 | Journal Article | LibreCat-ID: 41511
Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2021;52(7):703-716. doi:10.1002/mawe.202000288
LibreCat | DOI
 
[64]
2021 | Journal Article | LibreCat-ID: 41507
Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. Rapid Prototyping Journal. 2021;28(5):833-840. doi:10.1108/rpj-01-2021-0017
LibreCat | DOI
 
[63]
2021 | Journal Article | LibreCat-ID: 41506
Heiland S, Milkereit B, Hoyer K-P, Zhuravlev E, Kessler O, Schaper M. Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. Materials. 2021;14(23). doi:10.3390/ma14237190
LibreCat | DOI
 
[62]
2021 | Journal Article | LibreCat-ID: 24790
Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
LibreCat | DOI
 
[61]
2021 | Journal Article | LibreCat-ID: 41516
Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology. 2021;421. doi:10.1016/j.surfcoat.2021.127384
LibreCat | DOI
 
[60]
2021 | Journal Article | LibreCat-ID: 41512
Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A. 2021;822. doi:10.1016/j.msea.2021.141662
LibreCat | DOI
 
[59]
2021 | Journal Article | LibreCat-ID: 41510
Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue. 2021;153. doi:10.1016/j.ijfatigue.2021.106498
LibreCat | DOI
 
[58]
2021 | Journal Article | LibreCat-ID: 41509
Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
LibreCat | DOI
 
[57]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology. Published online 2021. doi:10.1016/j.jmatprotec.2021.117183
LibreCat | DOI
 
[56]
2021 | Journal Article | LibreCat-ID: 41517
Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. 2021;30(11):8048-8056. doi:10.1007/s11665-021-06065-9
LibreCat | DOI
 
[55]
2021 | Journal Article | LibreCat-ID: 24243
Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology. Published online 2021. doi:10.1016/j.surfcoat.2021.127384
LibreCat | DOI
 
[54]
2021 | Journal Article | LibreCat-ID: 24086
Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2021;52:703-716. doi:10.1002/mawe.202000288
LibreCat | DOI
 
[53]
2021 | Journal Article | LibreCat-ID: 41514
Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. 2021;871. doi:10.1016/j.jallcom.2021.159544
LibreCat | DOI
 
[52]
2021 | Journal Article | LibreCat-ID: 41515
Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. 2021;46. doi:10.1016/j.addma.2021.102087
LibreCat | DOI
 
[51]
2021 | Journal Article | LibreCat-ID: 27700
Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.142312
LibreCat | DOI
 
[50]
2021 | Journal Article | LibreCat-ID: 24090
Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. Published online 2021. doi:10.1007/s11665-021-06065-9
LibreCat | DOI
 
[49]
2021 | Journal Article | LibreCat-ID: 27509
Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. Rapid Prototyping Journal. Published online 2021. doi:10.1108/rpj-01-2021-0017
LibreCat | DOI
 
[48]
2021 | Journal Article | LibreCat-ID: 24087
Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. Published online 2021. doi:10.1016/j.jallcom.2021.159544
LibreCat | DOI
 
[47]
2021 | Journal Article | LibreCat-ID: 23897
Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.141662
LibreCat | DOI
 
[46]
2021 | Journal Article | LibreCat-ID: 23911
Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue. Published online 2021. doi:10.1016/j.ijfatigue.2021.106498
LibreCat | DOI
 
[45]
2021 | Journal Article | LibreCat-ID: 24088
Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. Published online 2021. doi:10.1016/j.addma.2021.102087
LibreCat | DOI
 
[44]
2020 | Journal Article | LibreCat-ID: 41519
Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. 2020;29(6):1396-1409. doi:10.1007/s11666-020-01081-y
LibreCat | DOI
 
[43]
2020 | Journal Article | LibreCat-ID: 41518
Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. 2020;51(11):1452-1464. doi:10.1002/mawe.202000109
LibreCat | DOI
 
[42]
2020 | Journal Article | LibreCat-ID: 24100
Engelkemeier K, Lindner J, Bürger J, et al. Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology. 2020;31:095701. doi:10.1088/1361-6528/ab55bc
LibreCat | DOI
 
[41]
2020 | Journal Article | LibreCat-ID: 41520
Wu H, Bill T, Teng ZJ, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. 2020;794. doi:10.1016/j.msea.2020.139597
LibreCat | DOI
 
[40]
2020 | Journal Article | LibreCat-ID: 41521
Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. 2020;394. doi:10.1016/j.surfcoat.2020.125748
LibreCat | DOI
 
[39]
2020 | Journal Article | LibreCat-ID: 41522
Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. Materialwissenschaft und Werkstofftechnik. 2020;51(4):517-530. doi:10.1002/mawe.201900191
LibreCat | DOI
 
[38]
2020 | Journal Article | LibreCat-ID: 24254
Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. Published online 2020:1452-1464. doi:10.1002/mawe.202000109
LibreCat | DOI
 
[37]
2020 | Journal Article | LibreCat-ID: 24092
Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y
LibreCat | DOI
 
[36]
2020 | Journal Article | LibreCat-ID: 24255
Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology. Published online 2020:1396-1409. doi:10.1007/s11666-020-01081-y
LibreCat | DOI
 
[35]
2020 | Journal Article | LibreCat-ID: 24093
Wu H, Bill T, Teng Z, et al. Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations. Materials Science and Engineering: A. Published online 2020. doi:10.1016/j.msea.2020.139597
LibreCat | DOI
 
[34]
2020 | Journal Article | LibreCat-ID: 24094
Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surface and Coatings Technology. Published online 2020. doi:10.1016/j.surfcoat.2020.125748
LibreCat | DOI
 
[33]
2020 | Journal Article | LibreCat-ID: 24091
Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik. Published online 2020:1452-1464. doi:10.1002/mawe.202000109
LibreCat | DOI
 
[32]
2020 | Journal Article | LibreCat-ID: 23896
Andreiev A, Hoyer K-P, Grydin O, Frolov Y, Schaper M. Degradable silver‐based alloys. Materialwissenschaft und Werkstofftechnik. Published online 2020:517-530. doi:10.1002/mawe.201900191
LibreCat | DOI
 
[31]
2019 | Book Chapter | LibreCat-ID: 24097
Hoyer K-P, Schaper M. Alloy Design for Biomedical Applications in Additive Manufacturing. In: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. ; 2019. doi:10.1007/978-3-030-05861-6_44
LibreCat | DOI
 
[30]
2019 | Book Chapter | LibreCat-ID: 24098
Tasche L, Hoyer K-P, Zhuravlev E, Grundmeier G, Schaper M, Keßler O. Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry. In: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. ; 2019. doi:10.1007/978-3-030-05861-6_45
LibreCat | DOI
 
[29]
2019 | Book Chapter | LibreCat-ID: 41523
Tasche L, Hoyer K-P, Zhuravlev E, Grundmeier G, Schaper M, Keßler O. Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2019. doi:10.1007/978-3-030-05861-6_45
LibreCat | DOI
 
[28]
2019 | Journal Article | LibreCat-ID: 41524
Engelkemeier K, Lindner JKN, Bürger J, et al. Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology. 2019;31(9). doi:10.1088/1361-6528/ab55bc
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: 2018 IEEE Transportation Electrification Conference and Expo (ITEC). ; 2018. doi:10.1109/itec.2018.8450250
LibreCat | DOI
 
[26]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. 2018;3(4):221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 41528
Engelkemeier K, Mücke C, Hoyer K-P, Schaper M. Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates. Advanced Composites and Hybrid Materials. 2018;2(1):189-199. doi:10.1007/s42114-018-0071-0
LibreCat | DOI
 
[22]
2018 | Journal Article | LibreCat-ID: 41527
Engelkemeier K, Hoyer K-P, Schaper M. Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers. Materials Letters. 2018;236:752-756. doi:10.1016/j.matlet.2018.11.041
LibreCat | DOI
 
[21]
2018 | Journal Article | LibreCat-ID: 24107
Engelkemeier K, Mücke C, Hoyer K-P, Schaper M. Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates. Advanced Composites and Hybrid Materials. Published online 2018:189-199. doi:10.1007/s42114-018-0071-0
LibreCat | DOI
 
[20]
2018 | Journal Article | LibreCat-ID: 24106
Engelkemeier K, Hoyer K-P, Schaper M. Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers. Materials Letters. Published online 2018:752-756. doi:10.1016/j.matlet.2018.11.041
LibreCat | DOI
 
[19]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: 2018 IEEE Transportation Electrification Conference and Expo (ITEC). IEEE; 2018. doi:10.1109/itec.2018.8450250
LibreCat | DOI
 
[18]
2017 | Journal Article | LibreCat-ID: 24109
Wiesener M, Peters K, Taube A, et al. Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting. Materials and Corrosion. Published online 2017:1028-1036. doi:10.1002/maco.201709478
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 24117
Taube A, Reschetnik W, Pauli L, Hoyer K-P, Kullmer G, Schaper M. Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen. In: Additive Fertigung von Bauteilen und Strukturen. Springer Vieweg; 2017. doi:10.1007/978-3-658-17780-5_13
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 24119
Brüggemann J-P, Reschetnik W, Kullmer G, et al. Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, . In: Deutscher Verband für Materialforschung und -prüfung e.V., ed. DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen. ; 2017:11-22.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 41531
Wiesener M, Peters K, Taube A, et al. Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting. Materials and Corrosion. 2017;68(10):1028-1036. doi:10.1002/maco.201709478
LibreCat | DOI
 
[14]
2017 | Book Chapter | LibreCat-ID: 41529
Taube A, Reschetnik W, Pauli L, Hoyer K-P, Kullmer G, Schaper M. Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen. In: Additive Fertigung von Bauteilen Und Strukturen. Springer Fachmedien Wiesbaden; 2017. doi:10.1007/978-3-658-17780-5_13
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. Published online 2017:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat | DOI
 
[12]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. 2017;133:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 24111
Reschetnik W, Brüggemann J-P, Aydinöz ME, et al. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. Procedia Structural Integrity. Published online 2016:3040-3048. doi:10.1016/j.prostr.2016.06.380
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 41533
Reschetnik W, Brüggemann J-P, Aydinöz ME, et al. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy. Procedia Structural Integrity. 2016;2:3040-3048. doi:10.1016/j.prostr.2016.06.380
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 41532
Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic pressing of IN718 components manufactured by selective laser melting. Additive Manufacturing. 2016;13:93-102. doi:10.1016/j.addma.2016.11.006
LibreCat | DOI
 
[8]
2016 | Journal Article | LibreCat-ID: 24110
Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic pressing of IN718 components manufactured by selective laser melting. Additive Manufacturing. Published online 2016:93-102. doi:10.1016/j.addma.2016.11.006
LibreCat | DOI
 
[7]
2015 | Journal Article | LibreCat-ID: 41534
Niendorf T, Brenne F, Hoyer K-P, et al. Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications. Metallurgical and Materials Transactions A. 2015;46(7):2829-2833. doi:10.1007/s11661-015-2932-2
LibreCat | DOI
 
[6]
2015 | Journal Article | LibreCat-ID: 24112
Niendorf T, Brenne F, Hoyer K-P, et al. Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications. Metallurgical and Materials Transactions A. Published online 2015:2829-2833. doi:10.1007/s11661-015-2932-2
LibreCat | DOI
 
[5]
2014 | Dissertation | LibreCat-ID: 24113
Hoyer K-P. Korrosionsuntersuchungen an experimentellen und technisch relevanten Magnesiumlegierungen. PZH-Verlag; 2014.
LibreCat
 
[4]
2014 | Journal Article | LibreCat-ID: 24114
Hoyer K-P, Angrisani GL, Klose C, Bach F-W, Hassel T. Influence of aluminium on the corrosion behaviour of binary magnesium-aluminium alloys in saline solutions. Materials and Corrosion. Published online 2014:23-30. doi:10.1002/maco.201206531
LibreCat | DOI
 
[3]
2013 | Journal Article | LibreCat-ID: 46510
Hoyer K-P, Angrisani GL, Klose C, Bach F-W, Hassel T. Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien. Materialwissenschaft und Werkstofftechnik. 2013;44(1):84-93. doi:10.1002/mawe.201300019
LibreCat | DOI
 
[2]
2012 | Journal Article | LibreCat-ID: 46512
Hoyer K-P, Hassel T, Bach F-W. Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen. Materialwissenschaft und Werkstofftechnik. 2012;43(12):1067-1073. doi:10.1002/mawe.201200921
LibreCat | DOI
 
[1]
2011 | Journal Article | LibreCat-ID: 46511
Waltz F, Swider MA, Hoyer K-P, et al. Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy. Journal of Materials Science. 2011;47(1):176-183. doi:10.1007/s10853-011-5785-0
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed