Kay-Peter Hoyer

Fakultät für Maschinenbau
Werkstoffkunde
hoyer@lwk.uni-paderborn.de
ID
48411

106 Publications

Mark all

[106]
2025 | Journal Article | LibreCat-ID: 58378
Stratmann, Ina, et al. “Developing a Simplified Linear-Elastic Material Model for Carbon Paper Applied in the Rough Rail-Wheel Contact.” Journal of Tribology, ASME International, 2025, pp. 1–19, doi:10.1115/1.4067696.
LibreCat | DOI
 
[105]
2025 | Journal Article | LibreCat-ID: 58133
Pramanik, Sudipta, et al. “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous Material.” Journal of Materials Engineering and Performance, Springer Science and Business Media LLC, 2025, doi:10.1007/s11665-024-10618-z.
LibreCat | DOI
 
[104]
2025 | Journal Article | LibreCat-ID: 58807
Neuser, Moritz, et al. “Mechanical Properties and Joinability of the Near-Eutectic Aluminium Casting Alloy AlSi12.” The Journal of Materials: Design and Applications, Part L, Sage Publications, 2025, doi:10.1177/14644207251319922.
LibreCat | DOI
 
[103]
2025 | Book Chapter | LibreCat-ID: 58950
Braun, Marcel Patrick Klaus, et al. “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System.” The Minerals, Metals & Materials Series, Springer Nature Switzerland, 2025, doi:10.1007/978-3-031-81061-9_12.
LibreCat | DOI
 
[102]
2025 | Conference Paper | LibreCat-ID: 59154
Neuser, Moritz, et al. “Processing of the Hypoeutectic AlSi9 Alloy with Twin-Roll Casting by Using Copper Shells.” Materials Research Proceedings, vol. 52, Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-26.
LibreCat | DOI
 
[101]
2025 | Conference Paper | LibreCat-ID: 59155
Lauth, Martin, et al. “Cost-Effective Repair Solution for Twin-Roll-Caster Rollers.” Materials Research Proceedings, vol. 52, Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-5.
LibreCat | DOI
 
[100]
2024 | Journal Article | LibreCat-ID: 52738
Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” Crystals, vol. 14, no. 2, 117, MDPI AG, 2024, doi:10.3390/cryst14020117.
LibreCat | DOI
 
[99]
2024 | Journal Article | LibreCat-ID: 57540
Mallow, Sina, et al. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” Production Engineering, Springer Science and Business Media LLC, 2024, doi:10.1007/s11740-024-01322-x.
LibreCat | DOI
 
[98]
2023 | Journal Article | LibreCat-ID: 49107
Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:10.3390/cryst13111592.
LibreCat | DOI
 
[97]
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.
LibreCat | DOI
 
[96]
2023 | Journal Article | LibreCat-ID: 41492
Pramanik, Sudipta, et al. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders, vol. 2, no. 1, MDPI AG, 2023, pp. 59–74, doi:10.3390/powders2010005.
LibreCat | DOI
 
[95]
2023 | Book Chapter | LibreCat-ID: 45360
Haase, Michael, et al. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast et al., Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
 
[94]
2023 | Journal Article | LibreCat-ID: 44078
Andreiev, Anatolii, et al. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” Journal of Materials Processing Technology, vol. 317, 117991, Elsevier BV, 2023, doi:10.1016/j.jmatprotec.2023.117991.
LibreCat | DOI
 
[93]
2023 | Journal Article | LibreCat-ID: 46503
Pramanik, Sudipta, et al. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping Journal, vol. 29, no. 6, Emerald, 2023, pp. 1257–69, doi:10.1108/rpj-06-2022-0190.
LibreCat | DOI
 
[92]
2023 | Journal Article | LibreCat-ID: 46507
Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” Advanced Engineering Materials, vol. 25, no. 14, Wiley, 2023, doi:10.1002/adem.202201850.
LibreCat | DOI
 
[91]
2023 | Book Chapter | LibreCat-ID: 46870
Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:10.14361/9783839463772-007.
LibreCat | DOI
 
[90]
2023 | Journal Article | LibreCat-ID: 47122
Pramanik, Sudipta, et al. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, Springer Science and Business Media LLC, 2023, doi:10.1007/s11661-023-07186-7.
LibreCat | DOI
 
[89]
2022 | Journal Article | LibreCat-ID: 32188
Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
LibreCat | DOI
 
[88]
2022 | Journal Article | LibreCat-ID: 30519
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, MDPI, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
LibreCat | DOI
 
[87]
2022 | Journal Article | LibreCat-ID: 40154
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, MDPI AG, 2022, p. 185, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[86]
2022 | Journal Article | LibreCat-ID: 29196 | OA
Hein, Maxwell, et al. “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications.” Metals, vol. 12, no. 1, 122, MDPI AG, 2022, doi:10.3390/met12010122.
LibreCat | Files available | DOI | Download (ext.)
 
[85]
2022 | Journal Article | LibreCat-ID: 33723
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[84]
2022 | Journal Article | LibreCat-ID: 31076
Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[83]
2022 | Journal Article | LibreCat-ID: 31075
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” Advanced Engineering Materials, Wiley, 2022, doi:10.1002/adem.202200022.
LibreCat | DOI
 
[82]
2022 | Journal Article | LibreCat-ID: 33498
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, 2022, doi:https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[81]
2022 | Journal Article | LibreCat-ID: 41497
Pramanik, Sudipta, et al. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.” Crystals, vol. 12, no. 9, 1217, MDPI AG, 2022, doi:10.3390/cryst12091217.
LibreCat | DOI
 
[80]
2022 | Journal Article | LibreCat-ID: 41494
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[79]
2022 | Journal Article | LibreCat-ID: 41499
Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
LibreCat | DOI
 
[78]
2022 | Journal Article | LibreCat-ID: 41496
Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.” International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.
LibreCat | DOI
 
[77]
2022 | Journal Article | LibreCat-ID: 32332
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[76]
2022 | Journal Article | LibreCat-ID: 41498
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[75]
2022 | Journal Article | LibreCat-ID: 41495
Pramanik, Sudipta, et al. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.” Materials Science and Engineering: A, vol. 854, 143887, Elsevier BV, 2022, doi:10.1016/j.msea.2022.143887.
LibreCat | DOI
 
[74]
2022 | Journal Article | LibreCat-ID: 41500
Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, vol. 15, no. 11, 3774, MDPI AG, 2022, doi:10.3390/ma15113774.
LibreCat | DOI
 
[73]
2022 | Journal Article | LibreCat-ID: 41503
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, no. 2, MDPI AG, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
LibreCat | DOI
 
[72]
2022 | Journal Article | LibreCat-ID: 41501
Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, vol. 321, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[71]
2022 | Journal Article | LibreCat-ID: 30103
Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion Science, vol. 200, Elsevier BV, 2022, p. 110186, doi:10.1016/j.corsci.2022.110186.
LibreCat | DOI
 
[70]
2022 | Journal Article | LibreCat-ID: 41502
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced Engineering Materials, vol. 24, no. 9, 2200022, Wiley, 2022, doi:10.1002/adem.202200022.
LibreCat | DOI
 
[69]
2022 | Journal Article | LibreCat-ID: 41504
Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion Science, vol. 200, 110186, Elsevier BV, 2022, doi:10.1016/j.corsci.2022.110186.
LibreCat | DOI
 
[68]
2022 | Journal Article | LibreCat-ID: 41493
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, Wiley, 2022, doi:10.1002/adem.202201008.
LibreCat | DOI
 
[67]
2022 | Journal Article | LibreCat-ID: 33340 | OA
Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, 2022.
LibreCat | Files available
 
[66]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[65]
2021 | Journal Article | LibreCat-ID: 41511
Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, no. 7, Wiley, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat | DOI
 
[64]
2021 | Journal Article | LibreCat-ID: 41507
Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, vol. 28, no. 5, Emerald, 2021, pp. 833–40, doi:10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[63]
2021 | Journal Article | LibreCat-ID: 41506
Heiland, Steffen, et al. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials, vol. 14, no. 23, 7190, MDPI AG, 2021, doi:10.3390/ma14237190.
LibreCat | DOI
 
[62]
2021 | Journal Article | LibreCat-ID: 24790
Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[61]
2021 | Journal Article | LibreCat-ID: 41516
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, vol. 421, 127384, Elsevier BV, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[60]
2021 | Journal Article | LibreCat-ID: 41512
Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, vol. 822, 141662, Elsevier BV, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[59]
2021 | Journal Article | LibreCat-ID: 41510
Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, vol. 153, 106498, Elsevier BV, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[58]
2021 | Journal Article | LibreCat-ID: 41509
Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, Elsevier BV, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[57]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[56]
2021 | Journal Article | LibreCat-ID: 41517
Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, vol. 30, no. 11, Springer Science and Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[55]
2021 | Journal Article | LibreCat-ID: 24243
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, 127384, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[54]
2021 | Journal Article | LibreCat-ID: 24086
Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat | DOI
 
[53]
2021 | Journal Article | LibreCat-ID: 41514
Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, vol. 871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[52]
2021 | Journal Article | LibreCat-ID: 41515
Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[51]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[50]
2021 | Journal Article | LibreCat-ID: 24090
Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, 2021, doi:10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[49]
2021 | Journal Article | LibreCat-ID: 27509
Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, 2021, doi:10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[48]
2021 | Journal Article | LibreCat-ID: 24087
Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, 159544, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[47]
2021 | Journal Article | LibreCat-ID: 23897
Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, 141662, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[46]
2021 | Journal Article | LibreCat-ID: 23911
Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[45]
2021 | Journal Article | LibreCat-ID: 24088
Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, 102087, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[44]
2020 | Journal Article | LibreCat-ID: 41519
Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, vol. 29, no. 6, Springer Science and Business Media LLC, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[43]
2020 | Journal Article | LibreCat-ID: 41518
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 11, Wiley, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[42]
2020 | Journal Article | LibreCat-ID: 24100
Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, 2020, p. 095701, doi:10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[41]
2020 | Journal Article | LibreCat-ID: 41520
Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[40]
2020 | Journal Article | LibreCat-ID: 41521
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, vol. 394, 125748, Elsevier BV, 2020, doi:10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[39]
2020 | Journal Article | LibreCat-ID: 41522
Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat | DOI
 
[38]
2020 | Journal Article | LibreCat-ID: 24254
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[37]
2020 | Journal Article | LibreCat-ID: 24092
Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[36]
2020 | Journal Article | LibreCat-ID: 24255
Tillmann, W., et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[35]
2020 | Journal Article | LibreCat-ID: 24093
Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 139597, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[34]
2020 | Journal Article | LibreCat-ID: 24094
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 125748, 2020, doi:10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[33]
2020 | Journal Article | LibreCat-ID: 24091
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[32]
2020 | Journal Article | LibreCat-ID: 23896
Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat | DOI
 
[31]
2019 | Book Chapter | LibreCat-ID: 24097
Hoyer, Kay-Peter, and Mirko Schaper. “Alloy Design for Biomedical Applications in Additive Manufacturing.” TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 2019, doi:10.1007/978-3-030-05861-6_44.
LibreCat | DOI
 
[30]
2019 | Book Chapter | LibreCat-ID: 24098
Tasche, Lennart, et al. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 2019, doi:10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[29]
2019 | Book Chapter | LibreCat-ID: 41523
Tasche, Lennart, et al. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” The Minerals, Metals & Materials Series, Springer International Publishing, 2019, doi:10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[28]
2019 | Journal Article | LibreCat-ID: 41524
Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, no. 9, 095701, IOP Publishing, 2019, doi:10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[26]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, vol. 3, no. 4, Springer Science and Business Media LLC, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[22]
2018 | Journal Article | LibreCat-ID: 41528
Engelkemeier, Katja, et al. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, vol. 2, no. 1, Springer Science and Business Media LLC, 2018, pp. 189–99, doi:10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[21]
2018 | Journal Article | LibreCat-ID: 41527
Engelkemeier, Katja, et al. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, vol. 236, Elsevier BV, 2018, pp. 752–56, doi:10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[20]
2018 | Journal Article | LibreCat-ID: 24107
Engelkemeier, Katja, et al. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, 2018, pp. 189–99, doi:10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[19]
2018 | Journal Article | LibreCat-ID: 24106
Engelkemeier, Katja, et al. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, 2018, pp. 752–56, doi:10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[18]
2017 | Journal Article | LibreCat-ID: 24109
Wiesener, Markus, et al. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared by Selective Laser Melting.” Materials and Corrosion, 2017, pp. 1028–36, doi:10.1002/maco.201709478.
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 24117
Taube, Alexander, et al. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, 2017, doi:10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 24119
Brüggemann, Jan-Peter, et al. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 11–22.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 41531
Wiesener, Markus, et al. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared by Selective Laser Melting.” Materials and Corrosion, vol. 68, no. 10, Wiley, 2017, pp. 1028–36, doi:10.1002/maco.201709478.
LibreCat | DOI
 
[14]
2017 | Book Chapter | LibreCat-ID: 41529
Taube, Alexander, et al. “Numerische Und Mechanische Untersuchung Additiv Gefertigter TiAl6V4 Gitterstrukturen.” Additive Fertigung von Bauteilen Und Strukturen, Springer Fachmedien Wiesbaden, 2017, doi:10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[12]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, vol. 133, Elsevier BV, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 24111
Reschetnik, Wadim, et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, 2016, pp. 3040–48, doi:10.1016/j.prostr.2016.06.380.
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 41533
Reschetnik, Wadim, et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, vol. 2, Elsevier BV, 2016, pp. 3040–48, doi:10.1016/j.prostr.2016.06.380.
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 41532
Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, vol. 13, Elsevier BV, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[8]
2016 | Journal Article | LibreCat-ID: 24110
Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[7]
2015 | Journal Article | LibreCat-ID: 41534
Niendorf, Thomas, et al. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, vol. 46, no. 7, Springer Science and Business Media LLC, 2015, pp. 2829–33, doi:10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[6]
2015 | Journal Article | LibreCat-ID: 24112
Niendorf, Thomas, et al. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, 2015, pp. 2829–33, doi:10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[5]
2014 | Dissertation | LibreCat-ID: 24113
Hoyer, Kay-Peter. Korrosionsuntersuchungen an experimentellen und technisch relevanten Magnesiumlegierungen. PZH-Verlag, 2014.
LibreCat
 
[4]
2014 | Journal Article | LibreCat-ID: 24114
Hoyer, Kay-Peter, et al. “Influence of Aluminium on the Corrosion Behaviour of Binary Magnesium-Aluminium Alloys in Saline Solutions.” Materials and Corrosion, 2014, pp. 23–30, doi:10.1002/maco.201206531.
LibreCat | DOI
 
[3]
2013 | Journal Article | LibreCat-ID: 46510
Hoyer, Kay-Peter, et al. “Korrosionsverhalten Binärer Magnesium-Zink-Legierungen in Salzhaltigen Medien.” Materialwissenschaft Und Werkstofftechnik, vol. 44, no. 1, Wiley, 2013, pp. 84–93, doi:10.1002/mawe.201300019.
LibreCat | DOI
 
[2]
2012 | Journal Article | LibreCat-ID: 46512
Hoyer, Kay-Peter, et al. “Einfluss Der Oberflächenbehandlung Auf Das Korrosionsverhalten von Magnesiumlegierungen.” Materialwissenschaft Und Werkstofftechnik, vol. 43, no. 12, Wiley, 2012, pp. 1067–73, doi:10.1002/mawe.201200921.
LibreCat | DOI
 
[1]
2011 | Journal Article | LibreCat-ID: 46511
Waltz, Florian, et al. “Synthesis of Highly Stable Magnesium Fluoride Suspensions and Their Application in the Corrosion Protection of a Magnesium Alloy.” Journal of Materials Science, vol. 47, no. 1, Springer Science and Business Media LLC, 2011, pp. 176–83, doi:10.1007/s10853-011-5785-0.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed

106 Publications

Mark all

[106]
2025 | Journal Article | LibreCat-ID: 58378
Stratmann, Ina, et al. “Developing a Simplified Linear-Elastic Material Model for Carbon Paper Applied in the Rough Rail-Wheel Contact.” Journal of Tribology, ASME International, 2025, pp. 1–19, doi:10.1115/1.4067696.
LibreCat | DOI
 
[105]
2025 | Journal Article | LibreCat-ID: 58133
Pramanik, Sudipta, et al. “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous Material.” Journal of Materials Engineering and Performance, Springer Science and Business Media LLC, 2025, doi:10.1007/s11665-024-10618-z.
LibreCat | DOI
 
[104]
2025 | Journal Article | LibreCat-ID: 58807
Neuser, Moritz, et al. “Mechanical Properties and Joinability of the Near-Eutectic Aluminium Casting Alloy AlSi12.” The Journal of Materials: Design and Applications, Part L, Sage Publications, 2025, doi:10.1177/14644207251319922.
LibreCat | DOI
 
[103]
2025 | Book Chapter | LibreCat-ID: 58950
Braun, Marcel Patrick Klaus, et al. “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System.” The Minerals, Metals & Materials Series, Springer Nature Switzerland, 2025, doi:10.1007/978-3-031-81061-9_12.
LibreCat | DOI
 
[102]
2025 | Conference Paper | LibreCat-ID: 59154
Neuser, Moritz, et al. “Processing of the Hypoeutectic AlSi9 Alloy with Twin-Roll Casting by Using Copper Shells.” Materials Research Proceedings, vol. 52, Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-26.
LibreCat | DOI
 
[101]
2025 | Conference Paper | LibreCat-ID: 59155
Lauth, Martin, et al. “Cost-Effective Repair Solution for Twin-Roll-Caster Rollers.” Materials Research Proceedings, vol. 52, Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-5.
LibreCat | DOI
 
[100]
2024 | Journal Article | LibreCat-ID: 52738
Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” Crystals, vol. 14, no. 2, 117, MDPI AG, 2024, doi:10.3390/cryst14020117.
LibreCat | DOI
 
[99]
2024 | Journal Article | LibreCat-ID: 57540
Mallow, Sina, et al. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” Production Engineering, Springer Science and Business Media LLC, 2024, doi:10.1007/s11740-024-01322-x.
LibreCat | DOI
 
[98]
2023 | Journal Article | LibreCat-ID: 49107
Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:10.3390/cryst13111592.
LibreCat | DOI
 
[97]
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.
LibreCat | DOI
 
[96]
2023 | Journal Article | LibreCat-ID: 41492
Pramanik, Sudipta, et al. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders, vol. 2, no. 1, MDPI AG, 2023, pp. 59–74, doi:10.3390/powders2010005.
LibreCat | DOI
 
[95]
2023 | Book Chapter | LibreCat-ID: 45360
Haase, Michael, et al. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast et al., Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
 
[94]
2023 | Journal Article | LibreCat-ID: 44078
Andreiev, Anatolii, et al. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” Journal of Materials Processing Technology, vol. 317, 117991, Elsevier BV, 2023, doi:10.1016/j.jmatprotec.2023.117991.
LibreCat | DOI
 
[93]
2023 | Journal Article | LibreCat-ID: 46503
Pramanik, Sudipta, et al. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping Journal, vol. 29, no. 6, Emerald, 2023, pp. 1257–69, doi:10.1108/rpj-06-2022-0190.
LibreCat | DOI
 
[92]
2023 | Journal Article | LibreCat-ID: 46507
Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” Advanced Engineering Materials, vol. 25, no. 14, Wiley, 2023, doi:10.1002/adem.202201850.
LibreCat | DOI
 
[91]
2023 | Book Chapter | LibreCat-ID: 46870
Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:10.14361/9783839463772-007.
LibreCat | DOI
 
[90]
2023 | Journal Article | LibreCat-ID: 47122
Pramanik, Sudipta, et al. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, Springer Science and Business Media LLC, 2023, doi:10.1007/s11661-023-07186-7.
LibreCat | DOI
 
[89]
2022 | Journal Article | LibreCat-ID: 32188
Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
LibreCat | DOI
 
[88]
2022 | Journal Article | LibreCat-ID: 30519
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, MDPI, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
LibreCat | DOI
 
[87]
2022 | Journal Article | LibreCat-ID: 40154
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, MDPI AG, 2022, p. 185, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[86]
2022 | Journal Article | LibreCat-ID: 29196 | OA
Hein, Maxwell, et al. “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications.” Metals, vol. 12, no. 1, 122, MDPI AG, 2022, doi:10.3390/met12010122.
LibreCat | Files available | DOI | Download (ext.)
 
[85]
2022 | Journal Article | LibreCat-ID: 33723
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[84]
2022 | Journal Article | LibreCat-ID: 31076
Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[83]
2022 | Journal Article | LibreCat-ID: 31075
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” Advanced Engineering Materials, Wiley, 2022, doi:10.1002/adem.202200022.
LibreCat | DOI
 
[82]
2022 | Journal Article | LibreCat-ID: 33498
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, 2022, doi:https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[81]
2022 | Journal Article | LibreCat-ID: 41497
Pramanik, Sudipta, et al. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.” Crystals, vol. 12, no. 9, 1217, MDPI AG, 2022, doi:10.3390/cryst12091217.
LibreCat | DOI
 
[80]
2022 | Journal Article | LibreCat-ID: 41494
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[79]
2022 | Journal Article | LibreCat-ID: 41499
Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
LibreCat | DOI
 
[78]
2022 | Journal Article | LibreCat-ID: 41496
Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.” International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.
LibreCat | DOI
 
[77]
2022 | Journal Article | LibreCat-ID: 32332
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[76]
2022 | Journal Article | LibreCat-ID: 41498
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[75]
2022 | Journal Article | LibreCat-ID: 41495
Pramanik, Sudipta, et al. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.” Materials Science and Engineering: A, vol. 854, 143887, Elsevier BV, 2022, doi:10.1016/j.msea.2022.143887.
LibreCat | DOI
 
[74]
2022 | Journal Article | LibreCat-ID: 41500
Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, vol. 15, no. 11, 3774, MDPI AG, 2022, doi:10.3390/ma15113774.
LibreCat | DOI
 
[73]
2022 | Journal Article | LibreCat-ID: 41503
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, no. 2, MDPI AG, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
LibreCat | DOI
 
[72]
2022 | Journal Article | LibreCat-ID: 41501
Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, vol. 321, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[71]
2022 | Journal Article | LibreCat-ID: 30103
Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion Science, vol. 200, Elsevier BV, 2022, p. 110186, doi:10.1016/j.corsci.2022.110186.
LibreCat | DOI
 
[70]
2022 | Journal Article | LibreCat-ID: 41502
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced Engineering Materials, vol. 24, no. 9, 2200022, Wiley, 2022, doi:10.1002/adem.202200022.
LibreCat | DOI
 
[69]
2022 | Journal Article | LibreCat-ID: 41504
Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion Science, vol. 200, 110186, Elsevier BV, 2022, doi:10.1016/j.corsci.2022.110186.
LibreCat | DOI
 
[68]
2022 | Journal Article | LibreCat-ID: 41493
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, Wiley, 2022, doi:10.1002/adem.202201008.
LibreCat | DOI
 
[67]
2022 | Journal Article | LibreCat-ID: 33340 | OA
Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, 2022.
LibreCat | Files available
 
[66]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[65]
2021 | Journal Article | LibreCat-ID: 41511
Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, no. 7, Wiley, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat | DOI
 
[64]
2021 | Journal Article | LibreCat-ID: 41507
Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, vol. 28, no. 5, Emerald, 2021, pp. 833–40, doi:10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[63]
2021 | Journal Article | LibreCat-ID: 41506
Heiland, Steffen, et al. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials, vol. 14, no. 23, 7190, MDPI AG, 2021, doi:10.3390/ma14237190.
LibreCat | DOI
 
[62]
2021 | Journal Article | LibreCat-ID: 24790
Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[61]
2021 | Journal Article | LibreCat-ID: 41516
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, vol. 421, 127384, Elsevier BV, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[60]
2021 | Journal Article | LibreCat-ID: 41512
Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, vol. 822, 141662, Elsevier BV, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[59]
2021 | Journal Article | LibreCat-ID: 41510
Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, vol. 153, 106498, Elsevier BV, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[58]
2021 | Journal Article | LibreCat-ID: 41509
Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, Elsevier BV, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[57]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[56]
2021 | Journal Article | LibreCat-ID: 41517
Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, vol. 30, no. 11, Springer Science and Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[55]
2021 | Journal Article | LibreCat-ID: 24243
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, 127384, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[54]
2021 | Journal Article | LibreCat-ID: 24086
Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat | DOI
 
[53]
2021 | Journal Article | LibreCat-ID: 41514
Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, vol. 871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[52]
2021 | Journal Article | LibreCat-ID: 41515
Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[51]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[50]
2021 | Journal Article | LibreCat-ID: 24090
Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, 2021, doi:10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[49]
2021 | Journal Article | LibreCat-ID: 27509
Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, 2021, doi:10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[48]
2021 | Journal Article | LibreCat-ID: 24087
Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, 159544, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[47]
2021 | Journal Article | LibreCat-ID: 23897
Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, 141662, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[46]
2021 | Journal Article | LibreCat-ID: 23911
Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[45]
2021 | Journal Article | LibreCat-ID: 24088
Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, 102087, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[44]
2020 | Journal Article | LibreCat-ID: 41519
Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, vol. 29, no. 6, Springer Science and Business Media LLC, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[43]
2020 | Journal Article | LibreCat-ID: 41518
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 11, Wiley, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[42]
2020 | Journal Article | LibreCat-ID: 24100
Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, 2020, p. 095701, doi:10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[41]
2020 | Journal Article | LibreCat-ID: 41520
Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[40]
2020 | Journal Article | LibreCat-ID: 41521
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, vol. 394, 125748, Elsevier BV, 2020, doi:10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[39]
2020 | Journal Article | LibreCat-ID: 41522
Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat | DOI
 
[38]
2020 | Journal Article | LibreCat-ID: 24254
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[37]
2020 | Journal Article | LibreCat-ID: 24092
Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[36]
2020 | Journal Article | LibreCat-ID: 24255
Tillmann, W., et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[35]
2020 | Journal Article | LibreCat-ID: 24093
Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 139597, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[34]
2020 | Journal Article | LibreCat-ID: 24094
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 125748, 2020, doi:10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[33]
2020 | Journal Article | LibreCat-ID: 24091
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[32]
2020 | Journal Article | LibreCat-ID: 23896
Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat | DOI
 
[31]
2019 | Book Chapter | LibreCat-ID: 24097
Hoyer, Kay-Peter, and Mirko Schaper. “Alloy Design for Biomedical Applications in Additive Manufacturing.” TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 2019, doi:10.1007/978-3-030-05861-6_44.
LibreCat | DOI
 
[30]
2019 | Book Chapter | LibreCat-ID: 24098
Tasche, Lennart, et al. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 2019, doi:10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[29]
2019 | Book Chapter | LibreCat-ID: 41523
Tasche, Lennart, et al. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” The Minerals, Metals & Materials Series, Springer International Publishing, 2019, doi:10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[28]
2019 | Journal Article | LibreCat-ID: 41524
Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, no. 9, 095701, IOP Publishing, 2019, doi:10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[27]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[26]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, vol. 3, no. 4, Springer Science and Business Media LLC, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[22]
2018 | Journal Article | LibreCat-ID: 41528
Engelkemeier, Katja, et al. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, vol. 2, no. 1, Springer Science and Business Media LLC, 2018, pp. 189–99, doi:10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[21]
2018 | Journal Article | LibreCat-ID: 41527
Engelkemeier, Katja, et al. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, vol. 236, Elsevier BV, 2018, pp. 752–56, doi:10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[20]
2018 | Journal Article | LibreCat-ID: 24107
Engelkemeier, Katja, et al. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, 2018, pp. 189–99, doi:10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[19]
2018 | Journal Article | LibreCat-ID: 24106
Engelkemeier, Katja, et al. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, 2018, pp. 752–56, doi:10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[18]
2017 | Journal Article | LibreCat-ID: 24109
Wiesener, Markus, et al. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared by Selective Laser Melting.” Materials and Corrosion, 2017, pp. 1028–36, doi:10.1002/maco.201709478.
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 24117
Taube, Alexander, et al. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, 2017, doi:10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 24119
Brüggemann, Jan-Peter, et al. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 11–22.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 41531
Wiesener, Markus, et al. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared by Selective Laser Melting.” Materials and Corrosion, vol. 68, no. 10, Wiley, 2017, pp. 1028–36, doi:10.1002/maco.201709478.
LibreCat | DOI
 
[14]
2017 | Book Chapter | LibreCat-ID: 41529
Taube, Alexander, et al. “Numerische Und Mechanische Untersuchung Additiv Gefertigter TiAl6V4 Gitterstrukturen.” Additive Fertigung von Bauteilen Und Strukturen, Springer Fachmedien Wiesbaden, 2017, doi:10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[12]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, vol. 133, Elsevier BV, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 24111
Reschetnik, Wadim, et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, 2016, pp. 3040–48, doi:10.1016/j.prostr.2016.06.380.
LibreCat | DOI
 
[10]
2016 | Journal Article | LibreCat-ID: 41533
Reschetnik, Wadim, et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, vol. 2, Elsevier BV, 2016, pp. 3040–48, doi:10.1016/j.prostr.2016.06.380.
LibreCat | DOI
 
[9]
2016 | Journal Article | LibreCat-ID: 41532
Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, vol. 13, Elsevier BV, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[8]
2016 | Journal Article | LibreCat-ID: 24110
Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[7]
2015 | Journal Article | LibreCat-ID: 41534
Niendorf, Thomas, et al. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, vol. 46, no. 7, Springer Science and Business Media LLC, 2015, pp. 2829–33, doi:10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[6]
2015 | Journal Article | LibreCat-ID: 24112
Niendorf, Thomas, et al. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, 2015, pp. 2829–33, doi:10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[5]
2014 | Dissertation | LibreCat-ID: 24113
Hoyer, Kay-Peter. Korrosionsuntersuchungen an experimentellen und technisch relevanten Magnesiumlegierungen. PZH-Verlag, 2014.
LibreCat
 
[4]
2014 | Journal Article | LibreCat-ID: 24114
Hoyer, Kay-Peter, et al. “Influence of Aluminium on the Corrosion Behaviour of Binary Magnesium-Aluminium Alloys in Saline Solutions.” Materials and Corrosion, 2014, pp. 23–30, doi:10.1002/maco.201206531.
LibreCat | DOI
 
[3]
2013 | Journal Article | LibreCat-ID: 46510
Hoyer, Kay-Peter, et al. “Korrosionsverhalten Binärer Magnesium-Zink-Legierungen in Salzhaltigen Medien.” Materialwissenschaft Und Werkstofftechnik, vol. 44, no. 1, Wiley, 2013, pp. 84–93, doi:10.1002/mawe.201300019.
LibreCat | DOI
 
[2]
2012 | Journal Article | LibreCat-ID: 46512
Hoyer, Kay-Peter, et al. “Einfluss Der Oberflächenbehandlung Auf Das Korrosionsverhalten von Magnesiumlegierungen.” Materialwissenschaft Und Werkstofftechnik, vol. 43, no. 12, Wiley, 2012, pp. 1067–73, doi:10.1002/mawe.201200921.
LibreCat | DOI
 
[1]
2011 | Journal Article | LibreCat-ID: 46511
Waltz, Florian, et al. “Synthesis of Highly Stable Magnesium Fluoride Suspensions and Their Application in the Corrosion Protection of a Magnesium Alloy.” Journal of Materials Science, vol. 47, no. 1, Springer Science and Business Media LLC, 2011, pp. 176–83, doi:10.1007/s10853-011-5785-0.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed