Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
253 Publications
1778 | Book | LibreCat-ID: 22111
Reschetnik, W., et al. “Beeinflussung Des Risswachstums Durch Kerben in Additiv Gefertigten Strukturen.” Additive Fertigung von Bauteilen Und Strukturen – Neue Erkenntnisse Und Praxisbeispiele.
LibreCat
1778 | Book | LibreCat-ID: 22114
Riemer, A., et al. Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe.
LibreCat
2010 | Journal Article | LibreCat-ID: 22355
Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigung in Lehre Und Forschung.” Newsletter Berliner Kreis, vol. 15, 2010, pp. 22–23, doi:https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung .
LibreCat
| DOI
2010 | Conference Paper | LibreCat-ID: 22050
Bagsik, A., et al. “FDM Part Quality Manufactured with ULTEM 9085.” Proceedings of International Conference Polymeric Materials, 2010, doi:https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 22188
Rüsenberg, Stefan, et al. “Mechanical and Physical Properties - A Way to Asses Quality of Laser Sintered Parts.” 22th Annual International Solid Freeform Fabrication Symposium, vol. 22, 2011, pp. 239–51, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf.
LibreCat
| DOI
2011 | Book | LibreCat-ID: 22191
Rüsenberg, Stefan, et al. Porosity as a Key to Increase Material Properties of Laser Sintered Parts. 2011, pp. 531–38, doi:10.1201/b11341.
LibreCat
| DOI
2011 | Book | LibreCat-ID: 22358
Adam, Guido, and Detmar Zimmer. Direct Manufacturing Design Rules. CRC Press, 2011, pp. 545–51, doi:10.1201/b11341-88.
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 22360
Zimmer, Detmar, and Guido Adam. “DMDR Direct Manufacturing Design Rules. Erarbeiten von Applikationsunabhängigen Konstruktionsregeln.” Rapid.Tech 2011 Fachmesse Und Anwendertagung Für Rapid-Technologie, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 22029
Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” ANTEC, 2011, pp. 1294–98, doi:https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22174
Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts Along the Process Chain.” 23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 1024–44, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22204
Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result of Multitude of Parameters.” The European Forum on Additive Manufacturing, vol. 17, 2012, doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22364
Adam, Guido, and Detmar Zimmer. Elementbasierte Erarbeitung von Konstruktionsregeln Für Additive Fertigung. 2012.
LibreCat
2012 | Conference Paper | LibreCat-ID: 21680
Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.” 23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 177–88, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22016
Bagsik, A., et al. “Long-Term Ageing Effects on Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” 23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 629–40, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22164
Bagsik, A., et al. “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” 1st International Conference on Thermo-Mechanically Graded Materials, vol. 1, 2012, pp. 129–34.
LibreCat
2012 | Conference Paper | LibreCat-ID: 22024
Bagsik, A., et al. “Extensive Analysis of the Mechanical Strength Properties of Fused Deposition Modeling Parts Manufactured with ULTEM 9085.” 5th International Conference on Polymer and Mould Innovations, vol. 5, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., 2012, pp. 266–72, doi:https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22175
Josupeit, Stefan, et al. “A Material-Based Quality Concept for Polymer Laser Sintering.” 24th Annual International Solid Freeform Fabrication Symposium , vol. 24, 2013, pp. 44–54, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22192
Rüsenberg, Stefan, and Hans-Joachim Schmid. “Advanced Characterization Method of Nylon 12 Materials for Application in Laser Sinter Processing.” International Conference of the Polymer-Processing-Society (PPS), vol. 29, 2013, doi:10.1063/1.4873877.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22197
Josupeit, Stefan, et al. “Mechanische Und Rheologische Untersuchungen Neuer Laser Sinter Materialien.” Merseburger Rapid Prototyping Forum, vol. 7, 2013, doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22201
Rüsenberg, Stefan, et al. “Additiv versus Konventionell: Benchmarking Am Beispiel Eines Designs Aus Der Luftfahrtindustrie.” RapidTech, 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 22373
Adam, Guido, and Detmar Zimmer. Design for Additive Manufacturing. 2013.
LibreCat
2013 | Journal Article | LibreCat-ID: 22374
Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigungsverfahren .” Konstruktion, vol. 7, no. 8, 2013, pp. 77–82, doi:https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren .
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22375
Adam, Guido. Die Potentiale Additiver Fertigung Nutzen. 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 22376
Adam, Guido. Konstruktionsregeln Für Additive Fertigungsverfahren - Ausbildung, Lehre. 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 21682
Lindemann, C., et al. “Impact and Influence Factors of Additive Manufacturing on Product Lifecycle Costs.” 24th Annual International Solid Freeform Fabrication Symposium, vol. 24, 2013, pp. 998–1008, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22017
Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.” 24th Annual International Solid Freeform Fabrication Symposium, vol. 24, 2013, pp. 805–15, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22176
Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22177
Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature Measurement of Laser Sintered Part Cakes.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22184
Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence on Part Quality Characteristics.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no. 3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 22186
Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer Laser Sintering Process .” Advances in Mechanical Engineering, vol. 6, SAGE Publications, 2014, pp. 1687–8140, doi:10.1155/2014/185374.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22193
Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser Sintering Cooling Process.” International Conference on Additive Technologies, vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22203
Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22382
Adam, Guido, and Detmar Zimmer. “Extension of Prior Developed Design Rules (LS).” ASPE - Spring Topical Meeting 2014, 2014, doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering .
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22383
Adam, Guido, and Detmar Zimmer. Systematic Investigations of Minimum Feature Sizes and Geometrical Accuracies. 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 22384
Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element Transitions and Aggregated Structures.” CIRP Journal of Manufacturing Science and Technology, vol. 7, no. 1, 2014, pp. 20–28, doi:10.1016/j.cirpj.2013.10.001 .
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22385
Adam, Guido. Erweiterung Des Gültigkeitsbereichs von Konstruktionsregeln Beim Lasersintern. 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22386
Adam, Guido. Extension of Prior Developed Design Rules for Laser Sintering. 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 21706
Deppe, G., and R. Koch. “Exploring the Influence of an Additive Manufacturing Integration on Future MRO Processes in Aeronautics.” Rtejournal, vol. 2014, no. 11, 2014, doi:https://www.rtejournal.de/ausgabe11/3958.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22018
Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 923–34, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22030
Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process on Parts Produced from Ultem 9085 by Fused Deposition Modeling.” ANTEC, SPE: Society of Plastics Engineers, 2014, pp. 2331–36.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22021
Bagsik, A., et al. “Mechanical Analysis of Lightweight Constructions Manufactured with Fused Deposition Modeling.” 29th International Conference of the Polymer Processing Society, vol. 29, American Institute of Physics , 2014, pp. 696–701, doi:10.1063/1.4873874.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22108
Reschetnik, W., et al. “Einsatz Additiver Fertigung Zur Optimierung Des Ermüdungsverhaltens von Gekerbten Strukturen.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22166
Klemp, E. “Industrial Applications in AM - Aerospace and Overhaul.” ASME AM3D Conference and Expo, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22168
Klemp, E. “Paradigmenwechsel Mit Additiven Fertigungsverfahren - Möglichkeiten Und Chancen.” Generatives Fertigen Und 3D-Drucken: Industrielle Revolution Oder Hype? Wissenschaftliches Kolloquium, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22169
Klemp, E. “Möglichkeiten, Chancen Und Mythen Additiver Fertigung.” Hanse-Aerospace-Themennachmittag Im Hause SLM, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22170
Klemp, E. “Additive Manufacturing - Potenziale, Zukunftschancen Und Hürden.” Messe Interzum, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22171
Klemp, E. “Technology Update 2015 for Metals.” SLM-Usermeeting, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22172
Klemp, E. “AM-Verfahren - Möglichkeiten in Der Industriellen Fertigung.” VDMA - Symposium Auf Der Hannover Messe Industrie, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22178
Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22179
Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22187
Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22189
Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22199
Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.” Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 22394
dell’Aere, Guido, and Detmar Zimmer. “On Design for Additive Manufacturing - Evaluating Geometrical Limitations.” Rapid Prototyping Journal, vol. 21, no. 6, Emerald Group Publishing Limited, 2015, pp. 662–70, doi:10.1108/RPJ-06-2013-0060.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22395
Lieneke, Tobias, et al. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Proceedings of the Rapid Tech 2015, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22396
Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22398
Adam, Guido. “On Tolerances for Additive Manufacturing.” Inside 3D Printing Conference and Expo, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22399
Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” Rapid Tech 2015, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22400
Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for Additive Manufacturing .” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21683
Lindemann, C., et al. “Towards a Sustainable and Economic Selection of Part Candidates for Additive Manufacturing.” Rapid Prototyping Journal, vol. 21, no. 2, Emerald, 2015, pp. 216–27, doi:https://doi.org/10.1108/RPJ-12-2014-0179.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21684
Deppe, G., et al. “Developement of an Economic Decision Support for the Application of Additive Manufacturing in Aerospace.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1560–63, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21685
Jahnke, U., et al. “Protection Measures against Product Piracy and Application by the Use of AM.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1601–11, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21686
Reiher, T., and R. Koch. “FE-Optimization and Data Handling for Additive Manufacturing of Structural Parts.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1092–103, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21700
Jahnke, U., and C. Lindemann. “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy.” Inside 3D Printing Conference and Expo, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 21701
Deppe, G., et al. “Exploring the Cost and Lifetime Benefits of a Topology Optimized Aerospace Part Applying Additive Manufacturing.” International Conference Production Engineering and Management 2015, vol. 5, 2015, pp. 219–30, doi:https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 21703
Lindemann, C., et al. “Guidelines for a Sustainable and Economic Selection of Part Candidates for Space Applications Using Additive Manufacturing.” Paris Space Week, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22031
Knoop, F., and Volker Schöppner. “Analysis and Optimization of the Dimensional Accuracy for FDM Parts Manufactured with ABS-M30.” ASPE Spring Topical Meeting, 2015, pp. 26–31, doi:https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22044
Knoop, F., and Volker Schöppner. “Mechanical and Thermal Properties of FDM Parts Manufactured with Polyamide 12.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 935–48, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22107
Brüggemann, J. P., et al. “Festigkeits- Und Leichtbauoptimierte Konstruktion Und Auslegung Eines Additiv Gefertigten Fahrradvorbaus.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 290–300, doi:10.3139/9783446450608.025.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22109
Reschetnik, W., et al. Fatigue Life Manipulation of SLM Parts. 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22128
Brüggemann, J. P., et al. “Optimierung von Fahrradtretkurbeln Mittels Additiver Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–12.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22130
Reschetnik, W., et al. “Lebensdauerbeeinflussung Durch Additive Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–40.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22132
Riemer, A., et al. “Materialkennwerte Lasergeschmolzener Werkstoffe.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–74.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22146
Reschetnik, W., et al. “Fatigue Crack Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity, 2016, pp. 3040–48.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22149
Riemer, A., and H. A. Richard. “Crack Propagation in Additive Manufactured Materials and Structures.” Procedia Structural Integrity, 2016, pp. 1229–36.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22180
Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22185
Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.” Additive Manufacturing, vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:10.1016/j.addma.2016.06.003.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22190
Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .” Fraunhofer Direct Digital Manufacturing Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22194
Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22403
Künneke, Thomas, and Detmar Zimmer. “Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen.” DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2016, pp. 151–60.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22404
Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.” EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22409
Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.” ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22410
Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” ASPE Spring Topical Meeting, 2016, p. S.3-8, doi:10.3139/9783446454606.004.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22411
Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” Summer Topical Meeting 2016, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22412
Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition Modeling.” CAT 2016, vol. 43, 2016, pp. 286–91, doi:10.1016/j.procir.2016.02.361.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21687
Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive Manufacturing in the MRO Aerospace Business by MADM.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 81–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21688
Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2236–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21689
Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive Manufacturing Technologies.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 93–112, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf.
LibreCat
| DOI
2016 | Book | LibreCat-ID: 21698
Lindemann, C., et al. Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace Market. Metropolis Verlag, 2016.
LibreCat
2016 | Book | LibreCat-ID: 21699
Jahnke, U., and R. Koch. Prevention of Product Piracy - Potentials of Additive Manufacturing. Metropolis Verlag, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 21702
Reiher, T., et al. “Combining Material Efficiency and Part Reliability by Product Optimization Applying Additive Manufacturing.” International Conference Production Engineering and Management 2016, vol. 6, 2016, pp. 27–38, doi:https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21705
Deppe, G., and R. Koch. “Unterstützung Des AM Entscheidungsprozesses in Der Luftfahrtersatzteilversorgung.” Rapid Tech 2016, vol. 13, Hanser Verlag, 2016, pp. 349–60, doi:https://doi.org/10.3139/9783446450608.031.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 21997
Gräßler, I., et al. “Data Management for Additive Manufacturing: Survey on Requirements and Current State.” 14th International DESIGN Conference 2016, vol. 14, 2016, doi:https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22019
Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 563–568, doi:10.1007/s11837-016-2197-2.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 22025
Moritzer, Elmar, et al. “Universelle Mikrobearbeitungsplaffform Und Basistechnologien Für Das Fertigen Und Markieren Mikrophysiologischer Systeme.” 6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - Interdisziplinär, Integrativ Und Innovativ, vol. 6, 2016, pp. 65–70.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22039
Fischer, M., et al. “Chemical Surface Treatment of Ultem 9085 Parts.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, 2016, pp. 121–33, doi:10.3139/9783446450608.010.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., et al. “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten.” Der Stahlformenbauer , no. 5, Technischer Fachverlag Möller, 2016.
LibreCat