Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
253 Publications
2024 | Conference Paper | LibreCat-ID: 53529
E. Moritzer and C. L. Elsner, “Evaluation of the Influence of Particle Type, Shape and Size on the Thermal Conductivity of Filled Polymers in the Fused Filament Fabrication Process,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2024), St. Louis, 2024.
LibreCat
2023 | Journal Article | LibreCat-ID: 43128
M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Powder Technology, vol. 422, Art. no. 118460, 2023, doi: 10.1016/j.powtec.2023.118460.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 45360
M. Haase et al., “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,” in Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44078
A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,” Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi: 10.1016/j.jmatprotec.2023.117991.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46815 |
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,” Progress in Additive Manufacturing, 2023, doi: 10.1007/s40964-023-00501-z.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 43046 |
S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” The International Journal of Advanced Manufacturing Technology , 2023, doi: https://doi.org/10.1007/s00170-023-11243-1.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46764 |
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48095
T. Koers and B. Magyar, “Compensation of the Shrinkage Behavior Occurring in Cylindrical Components in the FDM Process,” in Macromolecular Symposia, Bucharest, Romania, 2023, vol. 411, no. 1, doi: https://doi.org/10.1002/masy.202200185.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49774
M. Bieber, M. Haase, F. Tasche, A. Zibart, and B. Ponick, “Additively manufactured air-cooled lightweight rotor for an automotive electric motor,” 2023, doi: 10.1109/iemdc55163.2023.10238918.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 50742 |
C. Bödger, S. Gnaase, D. Lehnert, and T. Tröster, “Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718,” presented at the Solid Freeform Fabrication, Austin, 2023.
LibreCat
| Files available
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 48277 |
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48357
E. Moritzer, F. Hecker, F. Knaup, and J. Wächter, “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process,” in Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), Fukuoka (Japan), 2023, pp. 170001-1-170001–5, doi: 10.1063/5.0168548.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 47084
T. Koers and B. Magyar, “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48790
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 51218 |
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50931.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46862 |
F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50926.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 33859
E. Moritzer and C. L. Elsner, “Investigation and Improvement of Processing Parameters of a Copper-Filled Polymer Filament in Fused Filament Fabrication as a Basis for the Fabrication of Low-Porosity Metal Parts,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100390.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33861
E. Moritzer and J. Wächter, “Development of a Procedure for the Assessment of Material Potentials under Consideration of the Weld Seam Quality for Multi-Material Applications in the FDM Process,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100389.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33862
E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 35729
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 35724
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 30228
S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi: https://doi.org/10.1007/s11837-021-05042-w .
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 33356 |
S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33852 |
E. Moritzer and F. Hecker, “VALIDATION AND COMPARISON OF FEM-SIMULATION RESULTS OF THE FUSED DEPOSITION MODELING PROCESS UNDER CONSIDERATION OF DIFFERENT MESH RESOLUTIONS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 2011–2018, doi: 10.26153/tsw/44657.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30220 |
I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44558.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 32874 |
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 50744 |
C. Bödger, C. Weiss, E. Schiefer, D. Heussen, and C. Haefner, “Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion,” presented at the Solid Freeform Fabrication, Austin, 2022.
LibreCat
| Files available
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 33853 |
E. Moritzer and F. Hecker, “INVESTIGATION OF THE PROCESS PARAMETERS AND GEOMETRY DEPENDENT SHRINKAGE BEHAVIOR OF RASTER LINES IN THE FUSED DEPOSITION MODELING PROCESS,” in Proceedings of the 33rd Annual Freeform Fabrication Symposium, Austin, Texas, USA, 2022, pp. 1844–1858, doi: 10.26153/tsw/44654.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 28017
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, 2021, doi: https://doi.org/10.3390/ma14237190.
LibreCat
| Files available
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24168
E. Moritzer and J. Wächter, “Einfluss eines beheizten Bauraums auf die Schweißnahtqualität,” Plastverarbeiter, no. 04, pp. 30–32, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24589
E. Zhuravlev et al., “Assessment of AlZnMgCu alloy powder modification for crack-free laser powder bed fusion by differential fast scanning calorimetry,” Materials & Design, Art. no. 109677, 2021, doi: 10.1016/j.matdes.2021.109677.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 27528
T. Künneke and D. Zimmer, “Konstruktionsregeln für additiv gefertigte Partikeldämpfer/Design rules for additive manufactured particle dampers,” Konstruktion, pp. 72–78, 2021, doi: 10.37544/0720-5953-2021-11-12-72.
LibreCat
| DOI
2021 | Book Chapter | LibreCat-ID: 23734
S. Lammers, A. Kruse, J. Gierse, J. Tominski, and C.-F. Lindemann, “Konstruktionsrichtlinien in der Produktentwicklung,” in Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, R. Koch, D. Zimmer, T. Tröster, and I. Gräßler, Eds. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23760 |
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 20886
T. Nickchen, S. Heindorf, and G. Engels, “Generating Physically Sound Training Data for Image Recognition of Additively Manufactured Parts,” in Proceedings of the IEEE/CVF Winter Conference on Applications of Computer Vision, Hawaii, 2021, pp. 1994–2002.
LibreCat
2021 | Journal Article | LibreCat-ID: 22447
S. Magerkohl, D. Zimmer, L. Tasche, M. Schaper, S. Urbanek, and B. Ponick, “Funktionsoptimierte AM-Gestaltung eines E-Rotors,” antriebstechnik - Zeitschrift für Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen , vol. 60, no. 6, pp. 36–43, 2021.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 22495
D. Zimmer, T. Koers, and T. Bührmann, “Zukunftstechnologie und moderne Antriebe kombiniert: AM in modularen Antriebssystemen,” Newsletter der Wissenschaftlichen Gesellschaft für Produktentwicklung, vol. 1, pp. 9–10, 2021.
LibreCat
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 25283
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming,” presented at the 36th International Conference of the Polymer Processing Society, Montreal, Canada.
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 24162
E. Moritzer, J. Wächter, and C. L. Elsner, “Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK,” Macromolecular Symposia, vol. 395, no. 1, 2021, doi: 10.1002/masy.202000269.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24681
E. Moritzer and C. Schumacher, “Stainless Steel Parts Produced by Fused Deposition Modeling and a Sintering Process Compared to Components Manufactured in Selective Laser Melting,” Macromolecular Symposia, vol. 395, no. 1, Art. no. 2000275, 2021, doi: 10.1002/masy.202000275.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24554
E. Moritzer, C. L. Elsner, J. Wächter, and F. Knoop, “Investigation and Realization of Watertight FDM Structures Made of Ultem 9085 in Pressurized Systems,” presented at the 79th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24555
E. Moritzer, C. L. Elsner, and C. Schumacher, “Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters,” Polymer Composites, vol. 42, no. 11, pp. 6065–6079, 2021, doi: 10.1002/pc.26285.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 36845
A. Kruse, M. Ott, L. Risse, and R. Koch, “3D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe.” Deutscher Verband für Materialforschung und -prüfung e.V., 2021, doi: 10.48447/Add-2021-016.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24101 |
E. Moritzer, F. Hecker, C. L. Elsner, and A. Hirsch, “Investigations for the Optimization of Visual and Geometrical Properties of Arburg Plastic Freeforming Components,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 467–474, doi: 10.26153/tsw/17567.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24099 |
E. Moritzer, F. Hecker, C. Driediger, and A. Hirsch, “Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 575–584, doi: 10.26153/tsw/17577.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24096 |
E. Moritzer, F. Hecker, and A. Hirsch, “Investigation and Modeling of the Residence Time Dependent Material Degradation in the Arburg Plastic Freeforming,” in Proceedings: 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021), Austin, Texas, USA, 2021, pp. 1268–1275, doi: 10.26153/tsw/17643.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 24160 |
I. Kletetzka, C. Kummert, and H.-J. Schmid, “Laser Sintering Design Guidelines for media transmitting Components,” in Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Austin, 2021, vol. 32, doi: http://dx.doi.org/10.26153/tsw/17548.
LibreCat
| DOI
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 22138
J. P. Brüggemann et al., “Strukturoptimierung einer Messradkomponente zur realitätsnäheren Erfassung von Fahrzeuglastdaten und Bruchmechanische Bewertung,” in DVM-Bericht 252, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 252.
LibreCat
2020 | Conference Paper | LibreCat-ID: 22142
J. P. Brüggemann, L. Risse, S. C. Woodcock, G. Kullmer, and H. A. Richard, “Einsatz von Topologieoptimierungssoftware - Der Ersatz für den Ingenieur?,” in DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 405.
LibreCat
2020 | Conference Paper | LibreCat-ID: 22143
L. Risse and G. Kullmer, “Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf,” in DVM-Bericht 405, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2020, vol. 405.
LibreCat
2020 | Conference Paper | LibreCat-ID: 15490 |
L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, and B. Henning, “Reduction of systematic measurement deviation in acoustic absorption measurement systems,” in Fortschritte der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat
| Files available
2019 | Book | LibreCat-ID: 22113
J. P. Brüggemann, L. Risse, G. Kullmer, and H. A. Richard, Entwicklung von Optimierungsstrategien für Strukturbauteile unter Ausnutzung der Potentiale des Laser-Strahlschmelzens. 2019, pp. 1–22.
LibreCat
2019 | Book | LibreCat-ID: 22115
L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, Einsatz ingenieurmäßiger Methoden zur Lösung chirurgischer Herausforderungen. 2019, pp. 35–56.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22121
L. Risse and B. Schramm, “Möglichkeiten additiver Fertigungsverfahren im Zuge der Digitalisierung für den Planungsprozess chirurgischer Eingriffe,” in DVM - Bericht 1685, DVM-Tag 2019 – Bauteil verstehen, 2019, vol. 1685, pp. 103–120.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22123
J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen,” in DVM - Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 251, pp. 207–218.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22124
S. C. Woodcock, L. Risse, G. Kullmer, and H. A. Richard, “Bewertung von verschieden gearteten Gitterstrukturen in Bezug auf ihre Einsatzfähigkeit in Bandscheibenimplantaten,” in DVM - Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 404, pp. 151–162.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22137
J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Einflussfaktoren auf Bauteilgüte lasergeschmolzener Strukturen,” in DVM-Bericht 251, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 251, pp. 207–218.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22140
L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, F. Schlenker, and H. A. Richard, “Potentiale des Einsatzes individueller, additiv gefertigter medizinischer Hilfsmittel,” in DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, 2019, vol. 404, pp. 139–150.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22141
J. P. Brüggemann et al., “Strukturoptimierung durch den Einsatz des Laser-Strahlschmelzprozesses zur realitätsnäheren Erfassung von Fahrzeug-Lastdaten,” in DVM-Bericht 404, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2019, vol. 404, pp. 69–82.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22144
L. Risse, S. C. Woodcock, G. Kullmer, B. Schramm, and H. A. Richard, “Reconstruction of a defective finger joint surface and development of an adapted external fixator,” in Lecture Notes in Computational Vision and Biomechanics , 2019, pp. 230–238.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22442
T. Künneke, T. Lieneke, S. Lammers, and D. Zimmer, “Design guidelines for post-processing of laser beam melting in context of support structures,” in Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, pp. 137–140.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22443
T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22444
T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” konstruktionspraxis, vol. 6, pp. 24–26, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22022
E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 22047
E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” Welding in the World, vol. 63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22028
E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065, no. 1, doi: 10.1063/1.5088314.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22027
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 36846
A. Kruse and M. Mummert, “Mit 3D-Druck umfassende Teilhabe möglich machen ,” Werkstatt:Dialog, no. 4, pp. 34–35, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 22441
S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,” in II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 22041
E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22116
T. Schafran, B. Schramm, and L. Risse, “Additive Fertigung in der modernen Orthopädietechnik - Anwendung und Forschungsansätze -,” in DVM - AK Implantate und Biostrukturen, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 22117
B. Schramm, L. Risse, J. P. Brüggemann, H. A. Richard, and G. Kullmer, “Additive manufacturing for medical applications,” Journal of 3D Printing in medicine, vol. 2, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22118
L. Risse, B. Schramm, and T. Schafran, “Welche ingenieurstechnischen Perspektiven bietet die Versorgung durch additiv gefertigte Orthesen?,” in PreDay AK Fußchirurgie, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22120
C. Kummert and H.-J. Schmid, “The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering PA613 Build Part Properties,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22122
J. P. Brüggemann, L. Risse, A. Grübel, H. A. Richard, and G. Kullmer, “Validierung der strukturmechanischen Funktionsfähigkeit durch experimentelle Bauteilprüfungen additiv gefertigter Leichtbaustrukturen,” in DVM - Bericht 250, Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 250, pp. 89–98.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22125
A. Dsuban, J. Lohn, J. P. Brüggemann, and G. Kullmer, “Entwicklung und Umsetzung eines Qualitätssicherungskonzeptes für die additive Fertigung,” in DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 110–110.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22126
J. P. Brüggemann, L. Risse, H. A. Richard, and G. Kullmer, “Entwicklung von Optimierungsstrategien unter Ausnutzung des Potentials der additiven Fer-tigung,” in DVM - Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 11–21.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22139
L. Risse, B. Schramm, J. P. Brüggemann, S. C. Woodcock, G. Kullmer, and H. A. Richard, “CAE-gestützte Optimierung eines Hüftimplantats durch Ausnutzung der Potentiale additiver Fertigungsverfahren,” in DVM-Bericht 403, Arbeitskreis: Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V., 2018, vol. 403, pp. 89–100.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22145
T. D. Joy, J. P. Brüggemann, and G. Kullmer, “Crack Growth Simulation with Adapcrack3D in 3D Structures under the influence of Temperature,” in Procedia Structural Integrity, 2018, p. in press.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22150
L. Risse, B. Schramm, J. P. Brüggemann, G. Kullmer, and H. A. Richard, “Entwicklung von steifigkeitsangepassten, lasergeschmolzenen Kurzschaft-Hüftendoprothesen,” in Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 405–417.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22183 |
D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat
| Download (ext.)
2018 | Journal Article | LibreCat-ID: 22196
C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22430
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.
LibreCat