Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
165 Publications
2019 | Journal Article | LibreCat-ID: 30716
M. Kraus, P. Frey, T. Kleffel, D. Drummer, and M. Merklein, “Mechanical joining without auxiliary element by cold formed pins for multi-material-systems,” AIP Conference Proceedings, vol. 2113, p. 050006, 2019, doi: 10.1063/1.5112570.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 20678
C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,” Journal of Advanced Joining Processes. , 2020, doi: https://doi.org/10.1016/j.jajp.2020.100038.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30706
C. Steinfelder and A. Brosius, “A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis,” Lecture Notes in Production Engineering, pp. 134–141, 2020, doi: 10.1007/978-3-662-62138-7_14.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30704
H. Böhm, H. Zhang, B. Gröger, A. Hornig, and M. Gude, “Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading,” Journal of Composites Science, vol. 4, p. 188, 2020, doi: 10.3390/jcs4040188.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30707
B. Sadeghian, C. Guilleaume, R. Lafarge, and A. Brosius, “Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach,” Lecture Notes in Production Engineering, pp. 116–124, 2020, doi: 10.1007/978-3-662-62138-7_12.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30711
L. Ewenz, S. Schettler, A. T. Zeuner, and M. Zimmermann, “Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen,” Tagung Werkstoffprüfung 2020. Werkstoffe und Bauteile auf dem Prüfstand. Prüftechnik - Kennwertermit, 2020, doi: 10.48447/WP-2020-039.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30712
D. Köhler, B. Gröger, R. Kupfer, A. Hornig, and M. Gude, “Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process,” Procedia Manufacturing, vol. 47, pp. 940–947, 2020, doi: 10.1016/j.promfg.2020.04.288.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30710
C. Zirngibl, B. Schleich, and S. Wartzack, “Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen,” Proceedings of the 31st Symposium Design for X (DFX2020), 2020, doi: 10.35199/dfx2020.8.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30709
D. Köhler, R. Kupfer, and M. Gude, “Clinching in in-situ CT—A numerical study on suitable tool materials,” Journal of Advanced Joining Processes, vol. 2, p. 100034, 2020, doi: 10.1016/j.jajp.2020.100034.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30703
M. Kraus and M. Merklein, “Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures,” Journal of Materials Processing Technology, vol. 283, p. 116697, 2020, doi: 10.1016/j.jmatprotec.2020.116697.
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 20344 | 
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Development of a numerical method for analyzing the robustness of clinching in versatile process chains,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt.
LibreCat
| Files available
2020 | Journal Article | LibreCat-ID: 30721
S. Wituschek, C. M. Kuball, M. Merklein, and M. Lechner, “Test Method for Friction Characterization of Rivets,” Defect and Diffusion Forum, vol. 404, pp. 132–137, 2020, doi: 10.4028/www.scientific.net/ddf.404.132.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 23980
D. Weiß, B. Schramm, and G. Kullmer, “Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets,” vol. 28. Elsevier, pp. 2335–2341, 2020, doi: 10.1016/j.prostr.2020.11.081.
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 23982
D. Weiß, B. Schramm, and G. Kullmer, “Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures,” presented at the Material Science and Engineering Congress - MSE2020, Darmstadt, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20680
F. Kappe, S. Wituschek, M. Lechner, M. Bobbert, G. Meschut, and M. Merklein, “Investigation of influencing parameters on the joint formation of the self-piercing riveting process,” presented at the Material Science and Engineering Congress - MSE 2020, Darmstadt , 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 16859 |
S. Martin, A. A. Camberg, and T. Tröster, “Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion,” Procedia Manufacturing, pp. 419–424, 2020, doi: 10.1016/j.promfg.2020.04.324.
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 30713
T. Rostek, E. Wiens, and W. Homberg, “Joining with Versatile Friction-Spun Joint Connectors,” Procedia Manufacturing, vol. 47, pp. 395–399, 2020, doi: 10.1016/j.promfg.2020.04.313.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 51203
D. Köhler, R. Kupfer, and M. Gude, “Clinching in in-situ CT—A numerical study on suitable tool materials,” Journal of Advanced Joining Processes, vol. 2, Art. no. 100034, 2020, doi: 10.1016/j.jajp.2020.100034.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30647
J. Friedlein, S. Wituschek, M. Lechner, J. Mergheim, and P. Steinmann, “Inverse parameter identification of an anisotropic plasticity model for sheet metal,” IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012004, 2021, doi: 10.1088/1757-899X/1157/1/012004.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30645
J. Popp, M. Wolf, T. Mattner, and D. Drummer, “Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics,” Journal of Composites Science, vol. 5, p. 239, 2021, doi: 10.3390/jcs5090239.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30643
J. Kalich and U. Füssel, “Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds,” Journal of Manufacturing and Materials Processing, vol. 5, p. 105, 2021, doi: 10.3390/jmmp5040105.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30644
D. Pivovarov, J. Mergheim, K. Willner, and P. Steinmann, “Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations,” Computational Mechanics, 2021, doi: 10.1007/s00466-021-02099-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30642
J. Friedlein, J. Mergheim, and P. Steinmann, “Anisotropic plasticity‐damage material model for sheet metal — Regularised single surface formulation,” PAMM, vol. 21, 2021, doi: 10.1002/pamm.202100068.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20807 |
C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains,” presented at the ESAFORM 2021, Lüttich, doi: 10.25518/esaform21.4298.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 30650
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes,” IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012077, 2021, doi: 10.1088/1757-899X/1157/1/012077.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30648
C. Steinfelder, J. Kalich, A. Brosius, and U. Füssel, “Numerical and experimental investigation of the transmission moment of clinching points,” IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012003, 2021, doi: 10.1088/1757-899x/1157/1/012003.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30653
J. Popp, T. Kleffel, D. Römisch, T. Papke, M. Merklein, and D. Drummer, “Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins,” Applied Composite Materials, vol. 28, pp. 951–972, 2021, doi: 10.1007/s10443-021-09892-0.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30652
B. Gröger et al., “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies,” Materials, vol. 14, p. 2286, 2021, doi: 10.3390/ma14092286X.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30662
M. Busch and T. Hausotte, “Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks,” Key Engineering Materials, vol. 883, pp. 41–48, 2021, doi: 10.4028/www.scientific.net/kem.883.41.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30659
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.2781.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30661
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points,” Materials, vol. 14, p. 1859, 2021, doi: 10.3390/ma14081859.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30719
S. Wituschek and M. Lechner, “Friction Characterisation for a Tumbling Self-Piercing Riveting Process,” Key Engineering Materials, vol. 883, pp. 27–34, 2021, doi: 10.4028/www.scientific.net/kem.883.27.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30649
C. Wischer, C. Steinfelder, W. Homberg, and A. Brosius, “Joining with Friction Spun Joint Connectors – Manufacturing and Analysis,” IOP Conference Series: Materials Science and Engineering, vol. 1157, p. 012007, 2021, doi: 10.1088/1757-899x/1157/1/012007.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30702
C. Wischer and W. Homberg, “A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning,” Production Engineering, 2021, doi: 10.1007/s11740-021-01094-8.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30680
D. Weiß, B. Schramm, and G. Kullmer, “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X,” Key Engineering Materials, vol. 883, pp. 127–132, 2021, doi: 10.4028/www.scientific.net/kem.883.127.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30698
B. Gröger et al., “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,” Production Engineering, 2021, doi: 10.1007/s11740-021-01091-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30699
D. Weiß, B. Schramm, and G. Kullmer, “Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens,” Production Engineering, 2021, doi: 10.1007/s11740-021-01096-6.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30696
C. Zirngibl, B. Schleich, and S. Wartzack, “Approach for the automated and data-based design of mechanical joints,” Proceedings of the Design Society, vol. 1, p. 521, 2021, doi: 10.1017/pds.2021.52.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30700
C. Zirngibl, F. Dworschak, B. Schleich, and S. Wartzack, “Application of reinforcement learning for the optimization of clinch joint characteristics,” Production Engineering, 2021, doi: 10.1007/s11740-021-01098-4.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30701
D. Römisch, J. Popp, D. Drummer, and M. Merklein, “Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking,” Production Engineering, 2021, doi: 10.1007/s11740-021-01093-9.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30697
R. Lafarge, A. Wolf, C. Guilleaume, and A. Brosius, “A New Non-destructive Testing Method Applied to Clinching,” Minerals, Metals and Materials Series, p. 1461, 2021, doi: 10.1007/978-3-030-75381-8_121.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30684
D. Römisch, M. Kraus, and M. Merklein, “Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures,” Journal of Manufacturing and Materials Processing, vol. 5, p. 25, 2021, doi: 10.3390/jmmp5010025.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30682
D. Römisch, M. Kraus, and M. Merklein, “Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements,” Key Engineering Materials, vol. 883, pp. 19–26, 2021, doi: 10.4028/www.scientific.net/kem.883.19.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30718
S. Wituschek and M. Lechner, “Material characterisation methods for a tumbling self-piercing riveting process,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.398.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30683
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius, “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis,” Key Engineering Materials, vol. 883, pp. 89–96, 2021, doi: 10.4028/www.scientific.net/kem.883.89.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30663
L. Ewenz, J. Kalich, M. Zimmermann, and U. Füssel, “Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints,” Key Engineering Materials, vol. 883, pp. 65–72, 2021, doi: 10.4028/www.scientific.net/kem.883.65.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30688
B. Gröger, A. Hornig, A. Hoog, and M. Gude, “Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure,” ESAFORM 2021 - 24th International Conference on Material Forming, 2021, doi: 10.25518/esaform21.4293.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30685
E. Wiens, C. Wischer, and W. Homberg, “Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC),” ESAFORM, p. 4682, 2021, doi: 10.25518/esaform21.4682.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30664
S. Harzheim, C. Steinfelder, T. Wallmersperger, and A. Brosius, “A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints,” Key Engineering Materials, vol. 883, pp. 97–104, 2021, doi: 10.4028/www.scientific.net/kem.883.97.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30694
J. Friedlein, J. Mergheim, and P. Steinmann, “A finite plasticity gradient-damage model for sheet metals during forming and clinching,” Key Engineering Materials, vol. 883 KEM, p. 57, 2021, doi: 10.4028/www.scientific.net/KEM.883.57.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30689
B. Gröger, A. Hornig, A. Hoog, and M. Gude, “Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations,” Key Engineering Materials, vol. 883 KEM, p. 49, 2021, doi: 10.4028/www.scientific.net/KEM.883.49.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30720
M. Hofmann, Y. Shi, and T. Wallmersperger, “A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement,” PAMM, vol. 20, 2021, doi: 10.1002/pamm.202000122.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30695
C. Zirngibl and B. Schleich, “Approach for the automated analysis of geometrical clinch joint characteristics,” Key Engineering Materials, vol. 883 KEM, p. 105, 2021, doi: 10.4028/www.scientific.net/KEM.883.105.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34208
D. Pivovarov, J. Mergheim, K. Willner, and P. Steinmann, “Parametric FEM for computational homogenization of heterogeneous materials with random voids,” in PAMM, 2021, vol. 20, no. 1, doi: 10.1002/pamm.202000071.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 25556 |
M. Böhnke, M. S. Rossel, C. R. Bielak, M. Bobbert, and G. Meschut, “Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes,” The International Journal of Advanced Manufacturing Technology, 2021, doi: 10.1007/s00170-021-07986-4.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 38517
J. Popp, T. Kleffel, and D. Drummer, “Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins,” Joining Plastics, vol. 15, no. 3–4, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 34472
G. Kullmer, D. Weiß, and B. Schramm, “Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode,” Bremen, 2021, vol. DVM-Bericht 253, pp. 107–116, doi: 10.48447/BR-2021-013.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24006
D. Weiß, B. Schramm, M. Neuser, O. Grydin, and G. Kullmer, “Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie,” Bremen, 2021, vol. DVM-Bericht 253, pp. 231–240, doi: 10.48447/BR-2021-025.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34227
M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes,” Key Engineering Materials, vol. 883, pp. 81–88, 2021, doi: 10.4028/www.scientific.net/kem.883.81.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34222
F. Kappe, C. R. Bielak, V. Sartisson, M. Bobbert, and G. Meschut, “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters,” 2021, doi: 10.25518/esaform21.4277.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22798
M. Böhnke, F. Kappe, M. Bobbert, and G. Meschut, “Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes,” Materials Testing, vol. 63, no. 6, pp. 493–500, 2021, doi: 10.1515/mt-2020-0082.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34226
F. Kappe, M. Bobbert, and G. Meschut, “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part,” Key Engineering Materials, vol. 883, pp. 3–10, 2021, doi: 10.4028/www.scientific.net/kem.883.3.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30200
S. Wituschek, F. Kappe, and M. Lechner, “Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process,” Production Engineering, 2021, doi: 10.1007/s11740-021-01099-3.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24541
C. Steinfelder, S. Martin, A. Brosius, and T. Tröster, “Load Path Transmission in Joining Elements,” Key Engineering Materials, pp. 73–80, 2021, doi: 10.4028/www.scientific.net/kem.883.73.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24548 |
S. Martin and T. Tröster, “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.3801.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 26082
C. Wischer, E. Wiens, and W. Homberg, “Joining with versatile joining elements formed by friction spinning,” Journal of Advanced Joining Processes, vol. 3, Art. no. 100060, 2021, doi: 10.1016/j.jajp.2021.100060.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51202
D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius, “A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis,” Key Engineering Materials, vol. 883, pp. 89–96, 2021, doi: 10.4028/www.scientific.net/kem.883.89.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51199
B. Gröger et al., “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,” Production Engineering, vol. 16, no. 2–3, pp. 203–212, 2021, doi: 10.1007/s11740-021-01091-x.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51200
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points,” Materials, vol. 14, no. 8, Art. no. 1859, 2021, doi: 10.3390/ma14081859.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51201
D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Clinching in In-situ CT – Experimental Study on Suitable Tool Materials,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.2781.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51198
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius, “Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100089, 2021, doi: 10.1016/j.jajp.2021.100089.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29293 |
S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,” Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi: 10.1016/j.finmec.2021.100065.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24535
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34207
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34213
L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann, “Numerical and experimental identification of fatigue crack initiation sites in clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313, 2022, doi: 10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34219
D. Römisch, M. Kraus, and M. Merklein, “Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 236, no. 6, pp. 1187–1202, 2022, doi: 10.1177/14644207221081408.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34223
J. Popp, D. Römisch, M. Merklein, and D. Drummer, “Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures,” Applied Sciences, vol. 12, no. 10, Art. no. 4962, 2022, doi: 10.3390/app12104962.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34225
J. Troschitz, B. Gröger, V. Würfel, R. Kupfer, and M. Gude, “Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation,” Materials, vol. 15, no. 15, Art. no. 5454, 2022, doi: 10.3390/ma15155454.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34221
F. Binder and T. Hausotte, “Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie,” tm - Technisches Messen, vol. 89, no. s1, pp. 20–24, 2022, doi: 10.1515/teme-2022-0065.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34220
M. Busch, L. Butzhammer, and T. Hausotte, “Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen,” tm - Technisches Messen, vol. 89, no. s1, pp. 83–88, 2022, doi: 10.1515/teme-2022-0061.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34415
C. Zirngibl, C. Sauer, B. Schleich, and S. Wartzack, “Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections,” 2022, doi: 10.1115/detc2022-89172.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34417 |
C. Zirngibl, B. Schleich, and S. Wartzack, “Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels,” AI, vol. 3, no. 4, pp. 990–1006, 2022, doi: 10.3390/ai3040059.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 30626
D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, and A. Brosius, “Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis,” Journal of Advanced Joining Processes, vol. 5, p. 100089, 2022, doi: 10.1016/j.jajp.2021.100089.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30625
J. Popp and D. Drummer, “Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating,” Journal of Advanced Joining Processes, vol. 5, p. 100084, 2022, doi: 10.1016/j.jajp.2021.100084.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30624
L. Ewenz, M. Kuczyk, and M. Zimmermann, “Effect of the tool geometry on microstructure and geometrical features of clinched aluminum,” Journal of Advanced Joining Processes, vol. 5, 2022, doi: 10.1016/j.jajp.2021.100091.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30622
B. Gröger, V. Würfel, A. Hornig, and M. Gude, “Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process,” Journal of Advanced Joining Processes, vol. 5, 2022, doi: 10.1016/j.jajp.2022.100100.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30717
S. Wituschek and M. Lechner, “Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process,” Production Engineering, 2022, doi: 10.1177/14644207221080068.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30629
C. Steinfelder, J. Acksteiner, C. Guilleaume, and A. Brosius, “Analysis of the interactions between joint and component properties during clinching,” Production Engineering, 2022, doi: 10.1007/s11740-021-01102-x.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30640
M. Busch and T. Hausotte, “Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography,” Production Engineering, 2022, doi: 10.1007/s11740-021-01100-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30628
J. Kalich and U. Füssel, “Design of clinched joints on the basis of binding mechanisms,” Production Engineering, 2022, doi: 10.1007/s11740-022-01108-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30627
J. Friedlein, J. Mergheim, and P. Steinmann, “Observations on additive plasticity in the logarithmic strain space at excessive strains,” International Journal of Solids and Structures, vol. 239–240, p. 111416, 2022, doi: 10.1016/j.ijsolstr.2021.111416.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34253 |
S. Harzheim, L. Ewenz, M. Zimmermann, and T. Wallmersperger, “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100130, 2022, doi: 10.1016/j.jajp.2022.100130.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34252 |
A. T. Zeuner, L. Ewenz, J. Kalich, S. Schöne, U. Füssel, and M. Zimmermann, “The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints,” Metals, vol. 12, no. 9, Art. no. 1514, 2022, doi: 10.3390/met12091514.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34249 |
D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Robustness Analysis of Pin Joining,” Journal of Manufacturing and Materials Processing, vol. 6, no. 5, Art. no. 122, 2022, doi: 10.3390/jmmp6050122.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34255 |
A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 146, 2022, doi: 10.3390/jmmp6060146.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34248 |
D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 127, 2022, doi: 10.3390/jmmp6060127.
LibreCat
| DOI
| Download (ext.)