Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
1365 Publications
2023 | Conference Abstract | LibreCat-ID: 47626
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in PARTEC International Congress on Particle Technology - Book of Abstracts, Nürnberg, 2023, pp. 172–176.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46764 | 
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48597
S. Wu et al., “Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg,” presented at the 23rd International Conference on Composite Materials (ICCM23 2023), 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 48643
E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III: Challenges of lightweight design, vehicles, and rescuers,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, Bielefeld, Germany: transcript Verlag, 2023.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48672
V. Schöppner et al., “Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides,” presented at the 76th Annual Assembly of the International Institute of Welding (IIW), Singapur (Singapur), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48671
V. Schöppner et al., “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation,” Proceedings of the 2023 International Conference on Composite Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48665
V. Schöppner and T. Arndt, “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten,” Joining Plastics, no. 17, pp. 20–27, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48662
V. Schöppner and J. Petzke, “Dielectric Heating in the Vulcanization Process of Rubber Extrudates,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48663
E. Moritzer and C. Held, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” Essen (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48751
V. Schöppner et al., “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method,” Advanced Structured Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48754
V. Schöppner, L. Austermeier, and D. Trienens, “Verbesserung der Betriebspunktauslegung durch Schneckensimulation,” Wissenschaftlicher Arbeitskreis Kunststofftechnik, pp. 62–66, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48752
E. Moritzer and M. Scholle, “The main factors influencing glass fiber shortening in the processing of bulk molding compounds (BMC),” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48748
J. Köllermeier and V. Schöppner, “Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48749
S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48753
V. Schöppner, M. Frank, and C. W. T. Schall, “The Wave Must Be Right,” Plastic Insights, no. 7/2023, pp. 52–54, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48755
E. Moritzer and C. Held, “Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 46573
E. Baron et al., “Time-resolved pump–probe spectroscopic ellipsometry of cubic GaN. I. Determination of the dielectric function,” Journal of Applied Physics, vol. 134, no. 7, 2023, doi: 10.1063/5.0153091.
LibreCat
| DOI
2023 | Preprint | LibreCat-ID: 48502 |
S. Peitz, A. Hunstig, H. Rose, and T. Meier, “Accelerating the analysis of optical quantum systems using the Koopman operator.” 2023.
LibreCat
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 48349
M. Stefszky et al., “Lithium niobate waveguide squeezer with integrated cavity length stabilisation for network applications,” Optics Express, vol. 31, no. 21, Art. no. 34903, 2023, doi: 10.1364/oe.498423.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48586
J. Lückenkötter, S. Aydin, T. Marten, and T. Tröster, “Analysis and Optimization of Joint Formation in Hybrid Compression Molding,” presented at the 23nd International Conference on Composite Materials (ICCM23 2023), Belfast, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 48649
K. Gevers et al., “Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten,” in 11. Landshuter Leichtbau-Colloquium, 1st ed., Landshut: LC-Verlag, 2023, pp. 8–17.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48651
V. Schöppner, L. Austermeier, and A. Nordieker, “A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48660
V. Schöppner, L. Austermeier, and A. Alsoud, “Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48652
V. Schöppner et al., “Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide,” Joining Plastics, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48661
V. Schöppner and J. Petzke, “Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren,” presented at the AZuR-Kolloquium ALTREIFEN-RECYCLING, Gummersbach (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48464
H. Westermann and R. Mahnken, “Numerical investigations of new low‐order explicit last stage diagonal implicit Runge–Kutta schemes with the finite‐element method,” PAMM, vol. 23, no. 2, 2023, doi: 10.1002/pamm.202300071.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48465
H. Westermann and R. Mahnken, “On the accuracy, stability and computational efficiency of explicit last-stage diagonally implicit Runge–Kutta methods (ELDIRK) for the adaptive solution of phase-field problems,” Computer Methods in Applied Mechanics and Engineering, vol. 418, Art. no. 116545, 2023, doi: 10.1016/j.cma.2023.116545.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48673
P. Lenz, P. Kreutzheide, and R. Mahnken, “Multiphase elasto-plastic mean-field homogenisation and its consistent linearisation,” Computers & Structures, vol. 290, Art. no. 107160, 2023, doi: 10.1016/j.compstruc.2023.107160.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48739
E. Moritzer, C. L. Elsner, and K. Deupmann, “Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48738
V. Schöppner and D. Trienens, “Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48734
E. Moritzer, F. M. Mühlhoff, D. Rauen, B. Kolbe, H. Schlee, and C. Hokamp, “Großflächig, komplex? InMould-Plasma ist die Lösung!,” Kunststoffe, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48733
E. Moritzer, S. Kartelmeyer, D. Kreamer, and C. Jaroschek, “Goodbye Hot Spots - with No Extra Energy Expenditure,” Plastics Insights, no. 7/2023, pp. 38–41, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48735
V. Schöppner, M. Frank, and C. W. T. Schall, “Hauptsache, die Wellenlänge stimmt,” Kunststoffe, no. 9/2023, pp. 76–78, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48736
E. Moritzer, S. Kartelmeyer, D. Kraemer, and C. Jaroschek, “Hotspots ade - ohne Extra-Energieaufwand,” Kunststoffe, no. 5/2023, pp. 64–66, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48747
E. Moritzer and C. Held, “Optimization of additively manufactured parts for direct screwing,” presented at the 76th Annual Assembly and International Conference of the international Institute of Welding (IIW), Singapur (Singapur), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48746
V. Schöppner et al., “Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps,” KGK Kautschuk Gummi Kunststoffe, pp. 47–52, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48745
V. Schöppner, K. Gevers, M. Albrecht, and A. Seefried, “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48744
J. Petzke, D. Kleinschmidt, and V. Schöppner, “Microwave Heating of Rubber Extrudates,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48741
E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Konturnah kühlen für wenig Geld,” Kunststoffe, no. 8/2023, pp. 56–59, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 49117
D. Scharwald, T. Meier, and P. R. Sharapova, “Phase sensitivity of spatially broadband high-gain <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>SU</mml:mi><mml:mo>(</mml:mo><mml:mn>1</mml:mn><mml:mo>,</mml:mo><mml:mn>1</mml:mn><mml:mo>)</mml:mo></mml:mrow></mml:math> interferometers,” Physical Review Research, vol. 5, no. 4, Art. no. 043158, 2023, doi: 10.1103/physrevresearch.5.043158.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48740
V. Schöppner and D. Trienens, “Investigation regarding the correlation of the relative influences during the extrusion process of cast films on the residual melt quality,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau, 2023, doi: 10.22032/dbt.58867.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48743
V. Schöppner, M. Altepeter, C. W. T. Schall, S. Wanke, and M. Kley, “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder,” Polymers, p. 10, 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 49509
F. Brüning, Modellierung der Feststoffförderung im Einzug von Nutbuchsenextrudern mit Hilfe von DEM-Simulationen, vol. Band 1/2023. Düren: Shaker Verlag, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 49609
B. Zhang, M. Plidschun, M. A. Schmidt, and H.-S. Kitzerow, “Anchoring and electro-optic switching of liquid crystals on nano-structured surfaces fabricated by two-photon based nano-printing,” Optical Materials Express, vol. 13, no. 12, Art. no. 3467, 2023, doi: 10.1364/ome.503100.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 40513
R. Geromel, R. Rennerich, T. Zentgraf, and H.-S. Kitzerow, “Geometric-phase metalens to be used for tunable optical tweezers in microfluidics,” Liquid Crystals, vol. 50, no. 7–10, pp. 1193–1203, 2023, doi: 10.1080/02678292.2023.2171146.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43440
B. Zhang et al., “Luminescent DNA-origami nano-rods dispersed in a lyotropic chromonic liquid crystal,” Liquid Crystals, vol. 50, no. 7–10, pp. 1243–1251, 2023, doi: 10.1080/02678292.2023.2188494.
LibreCat
| DOI
2023 | Dissertation | LibreCat-ID: 49725
M. Hartung, Untersuchung der UVC-Bestrahlung als Oberflächenvorbehandlungsmethode von Polycarbonaten zur Erzeugung einer Verbundhaftung zu Flüssigsilikonkautschuken . 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49740
D. Stüker and V. Schöppner, “An approach for the numerical calculation of the non-isothermal pressure-throughput-characteristics of single screw melt-extruder,” 2023, doi: 10.1063/5.0138944.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49737
H. Malatyali, V. Schöppner, and T. Hoemann, “Investigation of the influence of process and screw configurations on fiber length for recycled carbon fiber,” 2023, doi: 10.1063/5.0139631.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49734
H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw extruder using CFD-simulation,” 2023, doi: 10.1063/5.0139630.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49742
F. I. Bürenhaus and E. Moritzer, “Influence of fiber geometry and sizing on glass fiber breakage,” 2023, doi: 10.1063/5.0135843.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 49866
A. Tchomgue Simeu and R. Mahnken, “Downwind and upwind approximations for mesh and model adaptivity of elasto‐plastic composites,” PAMM, 2023, doi: 10.1002/pamm.202300136.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 50012 |
H. Farheen, A. Strauch, J. C. Scheytt, V. Myroshnychenko, and J. Förstner, “Optimized, Highly Efficient Silicon Antennas for Optical Phased Arrays,” Photonics and Nanostructures - Fundamentals and Applications, vol. 58, p. 101207, 2023, doi: 10.1016/j.photonics.2023.101207.
LibreCat
| Files available
| DOI
2023 | Journal Article | LibreCat-ID: 48599 |
D. Bauch, D. Siebert, K. Jöns, J. Förstner, and S. Schumacher, “On‐Demand Indistinguishable and Entangled Photons Using Tailored Cavity Designs,” Advanced Quantum Technologies, 2023, doi: 10.1002/qute.202300142.
LibreCat
| Files available
| DOI
| Download (ext.)
2023 | Preprint | LibreCat-ID: 43246 |
D. Bauch, D. Siebert, K. Jöns, J. Förstner, and S. Schumacher, “On-demand indistinguishable and entangled photons at telecom frequencies using tailored cavity designs.” 2023.
LibreCat
| Files available
| Download (ext.)
2023 | Misc | LibreCat-ID: 48335
L. Knorr, A. Jungeilges, F. Pfeifer, S. C. Burmeister, and H. Meschede, Regenerative Energien für einen effizienten Betrieb von Presshärtelinien. Aachen: 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, 2023.
LibreCat
2023 | Misc | LibreCat-ID: 49106
A. Jungeilges, Possibilities of Sustainable Heating Methods for Press Hardening Processes. Bad Nauheim: Car Body Parts - Automotive Circle Conference, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49436
M. A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, and T. Tröster, “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess,” in Workshop Warmblechumformung, Fürth, 2023, vol. 18, pp. 99–118.
LibreCat
2023 | Journal Article | LibreCat-ID: 46023
B. Duderija, A. González-Orive, C. Ebbert, V. Neßlinger, A. Keller, and G. Grundmeier, “Electrode Potential-Dependent Studies of Protein Adsorption on Ti6Al4V Alloy,” Molecules, vol. 28, no. 13, Art. no. 5109, 2023, doi: 10.3390/molecules28135109.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 51167
B. Duderija et al., “Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 9, Art. no. 100181, 2023, doi: 10.1016/j.jajp.2023.100181.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 31189
T. Weich and L. L. Wolf, “Absence of principal eigenvalues for higher rank locally symmetric spaces,” Communications in Mathematical Physics, vol. 403, 2023, doi: https://doi.org/10.1007/s00220-023-04819-1.
LibreCat
| DOI
| arXiv
2023 | Journal Article | LibreCat-ID: 31059
P. Schütte, T. Weich, and S. Barkhofen, “Meromorphic Continuation of Weighted Zeta Functions on Open Hyperbolic Systems,” Communications in Mathematical Physics, vol. 398, pp. 655–678, 2023, doi: ttps://doi.org/10.1007/s00220-022-04538-z.
LibreCat
| DOI
| arXiv
2023 | Journal Article | LibreCat-ID: 48277 |
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48357
E. Moritzer, F. Hecker, F. Knaup, and J. Wächter, “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process,” in Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), Fukuoka (Japan), 2023, pp. 170001-1-170001–5, doi: 10.1063/5.0168548.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52122
U. Ali, M. Holthaus, and T. Meier, “Chirped Bloch-harmonic oscillations in a parametrically forced optical lattice,” Physical Review Research, vol. 5, no. 4, Art. no. 043152, 2023, doi: 10.1103/physrevresearch.5.043152.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52219
A. Börger and R. Mahnken, “A micropolar model accounting for asymmetric behavior of cold‐box sand in relation to tensile and compression tests,” PAMM, 2023, doi: 10.1002/pamm.202300126.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 47084
T. Koers and B. Magyar, “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48790
S. Lammers, T. Koers, B. Magyar, D. Zimmer, and T. Lieneke, “Depiction of support structures in technical drawings,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, USA, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 52800
D. Stüker and V. Schöppner, “Simplified numerical calculation of the isothermal, three-dimensional, Non-Newtonian flow characteristics of single-screw melt-extruder,” presented at the PROCEEDINGS OF THE 36TH CONFERENCE OF THE POLYMER PROCESSING SOCIETY, PPS36, 2023, doi: 10.1063/5.0138943.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 31733
V. Schöppner and F. Brüning, “Calibration of a Contact Model for DEM Simulations of Grooved Feed Sections of Single Screw Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS-36), Montreal (Kanada), 2023, doi: 10.1063/5.0135858.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34748
S. Vogtschmidt and V. Schöppner, “The short-and long-term properties of welded high-temperature-resistant thermoplastics,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2023, doi: 10.1007/s40194-023-01595-3.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52802
E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52801
M. Altepeter, S. Wanke, and V. Schöppner, “Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” 2023, doi: 10.1063/5.0135824.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48657
E. Moritzer, L. Tölle, C. Greb, and M. Haag, “Conceptions and Feasibility Study of Fiber Orientation in the Melt as Part of a Completely Circular Recycling Concept for Fiber-Reinforced Thermoplastics,” Journal of Composites Science, no. 7, p. 267, 2023, doi: 10.3390/jcs7070267.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48750
V. Schöppner, M. Altepeter, L. Austermeier, S. Wanke, and P. Meinheit, “Polypropylene Degradation on Co-Rotating Twin-Screw Extruders,” Polymers 2023, no. 15(9), p. 2181, 2023, doi: 10.3390/polym15092181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34736
V. Schöppner and M. Frank, “Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as well as Pressure Throughput Behavior,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2023, doi: 10.1063/5.0135825.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 29946
C. W. T. Schall and V. Schöppner, “Design of a test bench for measuring the degradation behavior of plastics during processing,” presented at the PPS36, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48742
V. Schöppner and C. W. T. Schall, “Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior,” Materials, no. 16(17), p. 5891, 2023, doi: 10.3390/ma16175891.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48654
E. Moritzer and C. Held, “Characterization of additively manufactured parts for direct screwing,” Welding in the World, 2023, doi: 10.1007/s40194-023-01610-7.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48659
D. Trienens, V. Schöppner, and R. Bunse, “Determination of Correlations between Melt Quality and the Screw Performance Index in the Extrusion Process,” Polymers 2023, 2023, doi: https://doi.org/10.3390/polym15163427.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48737
V. Schöppner and D. Kleinschmidt, “Improvement of a method for the correction of wall slip effects within the rheological measurements of filled rubber compounds,” SPE Polymers, pp. 1–17, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 52828
F. Brüning, D. Kleinschmidt, and J. Petzke, “Wall Slip-Free Viscosity Determination of Filled Rubber Compounds Using Steady-State Shear Measurements,” Polymers, pp. 1–23, 2023, doi: https://doi.org/10.3390/polym15224406.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52833
V. Schöppner, L. Austermeier, F. Brüning, J. P. Oldemeier, and O. Brandt, “Recycling-Ansatz für mehrkomponentige Kunststoffprodukte durch thermische Verbundtrennung,” EXTRUSION, no. 8/2023, pp. 56–59, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52840
V. Schöppner and T. Arndt, “Anvil-free ultrasonic welding for welding situations with one sided access,” 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 52837
E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Conformal Cooling at Low Cost,” Plastics Insights, no. 8/2023, pp. 44–48, 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 50449
D. Chalicheemalapalli Jayasankar, Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques. 2023.
LibreCat
| Files available
2023 | Conference Abstract | LibreCat-ID: 45831
D. Chalicheemalapalli Jayasankar, T. Stallmeister, J. Lückenkötter, and T. Tröster, “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” presented at the 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway , 2023.
LibreCat
| Files available
2023 | Misc | LibreCat-ID: 52671
R. Dumitrescu and K. Hölzle, Vorausschau und Technologieplanung. 17. Symposium für Vorausschau und Technologieplanung , vol. Band 413. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 51218 |
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50931.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46862 |
F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50926.
LibreCat
| DOI
| Download (ext.)