Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4009 Publications
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter, Julian, et al. Analysis and Optimization of Joint Formation in Hybrid Compression Molding. 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 48649
Gevers, Karina, et al. “Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten.” 11. Landshuter Leichtbau-Colloquium, 1st ed., Landshut: LC-Verlag, 2023, pp. 8–17.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48651
Schöppner, Volker, et al. A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48660
Schöppner, Volker, et al. Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48652
Schöppner, Volker, et al. “Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide.” Joining Plastics, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48661
Schöppner, Volker, and J. Petzke. Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48464
Westermann, Hendrik, and Rolf Mahnken. “Numerical Investigations of New Low‐order Explicit Last Stage Diagonal Implicit Runge–Kutta Schemes with the Finite‐element Method.” PAMM, vol. 23, no. 2, Wiley, 2023, doi:10.1002/pamm.202300071.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48465
Westermann, Hendrik, and Rolf Mahnken. “On the Accuracy, Stability and Computational Efficiency of Explicit Last-Stage Diagonally Implicit Runge–Kutta Methods (ELDIRK) for the Adaptive Solution of Phase-Field Problems.” Computer Methods in Applied Mechanics and Engineering, vol. 418, 116545, Elsevier BV, 2023, doi:10.1016/j.cma.2023.116545.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48673
Lenz, Peter, et al. “Multiphase Elasto-Plastic Mean-Field Homogenisation and Its Consistent Linearisation.” Computers & Structures, vol. 290, 107160, Elsevier BV, 2023, doi:10.1016/j.compstruc.2023.107160.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48739
Moritzer, Elmar, et al. Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48738
Schöppner, Volker, and Dorte Trienens. Investigation of the Influence of Screw Geometry on the Resulting Melt Quality for Cast Film Extrusion. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48734
Moritzer, Elmar, et al. “Großflächig, komplex? InMould-Plasma ist die Lösung!” Kunststoffe, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48733
Moritzer, Elmar, et al. “Goodbye Hot Spots - with No Extra Energy Expenditure.” Plastics Insights, no. 7/2023, 2023, pp. 38–41.
LibreCat
2023 | Journal Article | LibreCat-ID: 48735
Schöppner, Volker, et al. “Hauptsache, die Wellenlänge stimmt.” Kunststoffe, no. 9/2023, 2023, pp. 76–78.
LibreCat
2023 | Journal Article | LibreCat-ID: 48736
Moritzer, Elmar, et al. “Hotspots ade - ohne Extra-Energieaufwand.” Kunststoffe, no. 5/2023, 2023, pp. 64–66.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48747
Moritzer, Elmar, and Christian Held. Optimization of Additively Manufactured Parts for Direct Screwing. Springer Verlag, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48746
Schöppner, Volker, et al. “Optimisation of the Simulation of Rubber Extrusion Dies by Means of the Integration of Empirically Determined Characteristic Maps.” KGK Kautschuk Gummi Kunststoffe, 2023, pp. 47–52.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48745
Schöppner, Volker, et al. Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48744
Petzke, J., et al. Microwave Heating of Rubber Extrudates. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48741
Moritzer, Elmar, et al. “Konturnah kühlen für wenig Geld.” Kunststoffe, no. 8/2023, 2023, pp. 56–59.
LibreCat
2023 | Journal Article | LibreCat-ID: 48639
Kamer, Jerry, et al. “Threshold Photoelectron Spectroscopy and Dissociative Photoionization of Benzonitrile.” Physical Chemistry Chemical Physics, vol. 25, no. 42, Royal Society of Chemistry (RSC), 2023, pp. 29070–79, doi:10.1039/d3cp03977c.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46988
Pottebaum, Jens, et al. “Extremwettersituationen in alpinen Gebieten: Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten.” Tagungsband der Fachtagung Katastrophenforschung 2023, edited by Disaster Competence Network Austria, 2023, pp. 26–29.
LibreCat
| Files available
2023 | Journal Article | LibreCat-ID: 49107
Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:10.3390/cryst13111592.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44326
Götte, Ricarda-Samantha, and Julia Timmermann. “Approximating a Laplacian Prior for Joint State and Model Estimation within an UKF.” IFAC-PapersOnLine, vol. 56, no. 2, 2023, pp. 869–74.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48740
Schöppner, Volker, and Dorte Trienens. Investigation Regarding the Correlation of the Relative Influences during the Extrusion Process of Cast Films on the Residual Melt Quality. 2023, doi:10.22032/dbt.58867.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46295
Bartley, Aurélie, et al. “Low Temperature Debonding of Toughened Structural Adhesive Joints: A New Approach to Repairs in the Automotive Industry.” International Journal of Adhesion and Adhesives, vol. 126, 2023, doi:https://doi.org/10.1016/j.ijadhadh.2023.103486.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48743
Schöppner, Volker, et al. “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder.” Polymers, 2023, p. 10.
LibreCat
2023 | Dissertation | LibreCat-ID: 49509
Brüning, Florian. Modellierung der Feststoffförderung im Einzug von Nutbuchsenextrudern mit Hilfe von DEM-Simulationen. Shaker Verlag, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49560
Stieren, Stephan, et al. “Concept for a Cloud-Based Holistic Energy Management of Domestic Appliances to Stabilize the Energy Supply and the Power Grid.” NEIS - Conference on Sustainable Energy Supply and Energy Storage Systems, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 47108
Gräßler, Iris, et al. “KI-basierte Extrahierung von Anforderungen aus Regularien für die Automobilentwicklung.” Design fox X - Beiträge zum 34. DfX-Symposium, edited by Dieter Krause et al., vol. 34, 2023, pp. 163–72, doi:10.35199/dfx2023.17.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44314 | 
Arian, Bahman, et al. “Cryogenic Reverse Flow Forming of AISI 304L.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-219.
LibreCat
| DOI
| Download (ext.)
2023 | Dissertation | LibreCat-ID: 49725
Hartung, Michael. Untersuchung Der UVC-Bestrahlung Als Oberflächenvorbehandlungsmethode von Polycarbonaten Zur Erzeugung Einer Verbundhaftung Zu Flüssigsilikonkautschuken . 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49740
Stüker, Daniel, and Volker Schöppner. “An Approach for the Numerical Calculation of the Non-Isothermal Pressure-Throughput-Characteristics of Single Screw Melt-Extruder.” INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0138944.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49737
Malatyali, Hatice, et al. “Investigation of the Influence of Process and Screw Configurations on Fiber Length for Recycled Carbon Fiber.” INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0139631.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49734
Malatyali, Hatice, and Volker Schöppner. “Investigation of Shear Rates in Twin-Screw Extruder Using CFD-Simulation.” INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0139630.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49742
Bürenhaus, Franziska Isabelle, and Elmar Moritzer. “Influence of Fiber Geometry and Sizing on Glass Fiber Breakage.” INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023, doi:10.1063/5.0135843.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49774
Bieber, Maximilian, et al. “Additively Manufactured Air-Cooled Lightweight Rotor for an Automotive Electric Motor.” 2023 IEEE International Electric Machines & Drives Conference (IEMDC), IEEE, 2023, doi:10.1109/iemdc55163.2023.10238918.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49781
Magerkohl, Sebastian, et al. Future of Electric Motors: Additive Manufacturing of Components with Innovative Lightweight and Cooling Structures. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 49866
Tchomgue Simeu, Arnold, and Rolf Mahnken. “Downwind and Upwind Approximations for Mesh and Model Adaptivity of Elasto‐plastic Composites.” PAMM, Wiley, 2023, doi:10.1002/pamm.202300136.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48946
Gräßler, Iris, et al. “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security.” Konstruktion, vol. 75, no. 11–12, VDI Fachmedien GmbH and Co. KG, 2023, pp. 60–65, doi:10.37544/0720-5953-2023-11-12-60.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48075 |
Homberg, Werner, et al. “Softsensors: Key Component of Property Control in Forming Technology.” Production Engineering, Springer Science and Business Media LLC, 2023, doi:10.1007/s11740-023-01227-1.
LibreCat
| DOI
| Download (ext.)
2023 | Book Chapter | LibreCat-ID: 50178
Beule, Felix, et al. “Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, DVS Media GmbH, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50207
Tews, Karina, et al. “Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50275
Schmolke, Tobias, and Gerson Meschut. “Untersuchung Der Dichtheitseigenschaften Hybridgefügter Mischbauverbindungen Für Den Einsatz in Batterieghäusen Für Elektrofahrzeuge.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50276
Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung Der Dämpfungseigenschaften Geklebter Strukturen Unter Dynamischer Beanspruchung.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50274
Chudalla, Nick, and Gerson Meschut. “Effizientes Lösen von Klebverbindungen in Der Fahrzeuginstandsetzung.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 50448
Stallmeister, Tim. Verfahrensentwicklung Zur Einstufigen Herstellung von Biegebelastbaren Hybridstrukturen Im Fließpressprozess. 2023, doi:10.17619/UNIPB/1-1670.
LibreCat
| DOI
2023 | Misc | LibreCat-ID: 48335
Knorr, Lukas, et al. Regenerative Energien für einen effizienten Betrieb von Presshärtelinien. 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, 2023.
LibreCat
2023 | Misc | LibreCat-ID: 49106
Jungeilges, André. Possibilities of Sustainable Heating Methods for Press Hardening Processes. Car Body Parts - Automotive Circle Conference, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49436
Kaiser, Maximilian Alexander, et al. “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.” Workshop Warmblechumformung, edited by Marion Merklein, vol. 18, Lehrstuhl für Fertigungstechnologie, 2023, pp. 99–118.
LibreCat
2023 | Conference Paper | LibreCat-ID: 36840
Neumann, Stefan, et al. Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches. doi:10.1016/j.procir.2023.09.019.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 50727
Olfert, Viktoria, et al. Methodenentwicklung Zur Prognose Des Crashverhaltens von Widerstandspunktgeschweißten 3-Stahlblechverbindungen. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 50076
Bührmann, Tobias, and Balázs Magyar. “Approximate Simulation of the Hysteresis Friction of Radial Shaft Seals.” 64. Tribologie-Fachtagung 2023, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 50742 |
Bödger, Christian, et al. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.
LibreCat
| Files available
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 51117
Scheidemann, Claus, et al. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51118
Scheidemann, Claus, et al. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51119
Scheidemann, Claus, et al. Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. 2023.
LibreCat
2023 | Special Issue | LibreCat-ID: 51136
Fröde, Fabian, et al., editors. “Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame.” Applications in Energy and Combustion Science, Elsevier, 2023, doi:https://doi.org/10.1016/j.jaecs.2023.100191.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 51147
Massopo, Orlando, et al. Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis (Presentation). 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51145
Massopo, Orlando, et al. Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster). 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51142
Massopo, Orlando, et al. Einfluss Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag). 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 50070 |
Junker, Annika, et al. “Adaptive Koopman-Based Models for Holistic Controller and Observer Design.” IFAC-PapersOnLine, vol. 56, no. 3, Elsevier BV, 2023, pp. 625–30, doi:10.1016/j.ifacol.2023.12.094.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 51190
Köhler, Daniel, et al. “Comparison of Ex- and in-Situ Investigations of Clinched Single-Lap Shear Specimens.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-20.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 51194
Köhler, Daniel, et al. “In-Situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal Clinch Point.” Lecture Notes in Production Engineering, Springer International Publishing, 2023, doi:10.1007/978-3-031-18318-8_28.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 50551
Haak, Viktor, et al. “Einfluss von Prozessparametern auf Dreiblech-Hybrid-Mischverbindungen beim zweistufigen Widerstandselementschweißen.” 13. Fügetechnisches Gemeinschaftskolloquium, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51726
Beimdiek, Janis, et al. Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster). 2023.
LibreCat
| Files available
2023 | Mastersthesis | LibreCat-ID: 51721
Elma, Benjamin, and Janis Beimdiek. Investigations on Aerosol Synthesis of Polymer Particles. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48277 |
Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48357
Moritzer, Elmar, et al. “Investigation of the Deposition Velocity Related Temperature Deviations for High Temperature Materials in the FDM Process.” Proceedings of the 37th International Conference of the Polymer Processing Society (PPS-37), AIP Publishing, 2023, pp. 170001-1-170001–05, doi:10.1063/5.0168548.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 51727
Beimdiek, Janis, et al. Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System. VDI Verlag, 2023.
LibreCat
| Files available
2023 | Journal Article | LibreCat-ID: 52219
Börger, Alexander, and Rolf Mahnken. “A Micropolar Model Accounting for Asymmetric Behavior of Cold‐box Sand in Relation to Tensile and Compression Tests.” PAMM, Wiley, 2023, doi:10.1002/pamm.202300126.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 43047
Hollenhorst, Viola, and Eugeny Y. Kenig. CFD-Untersuchungen der Fluiddynamik und des Wärmetransports an rauen Oberflächen. 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 52402
Salten, Alexander Heinrich Johannes. Modellierung Der Reaktivabsorption in Regellosen Schüttungen Und Modellbasierte Optimierung von Füllkörpern Mit Dem Ansatz Der Hydrodynamischen Analogien. LibreCat University, 2023, doi:10.17619/UNIPB/1-1757.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 50547
Haak, Viktor, et al. “Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise.” 25. DVS-Sondertagung Widerstandsschweißen, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 51360
Röder, Lilli Sophia, et al. “Demand Side Management Implementation in Downstream Digestate Treatment of a Biomethane Biorefinery.” Chemical Engineering Transactions, vol. 105, 2023, pp. 421–26, doi:10.3303/CET23105071.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 49580
Röder, Lilli, et al. “Decision Support Tool to Determine the Suitability of Demand Side Management Implementation in Continuously Operated Processes – A Biorefinery Case Study.” Biofuels, Bioproducts and Biorefining, Wiley, 2023, doi:10.1002/bbb.2558.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52204 |
Genovese, Matteo, et al. “Power-to-Hydrogen and Hydrogen-to-X Energy Systems for the Industry of the Future in Europe.” International Journal of Hydrogen Energy, vol. 48, no. 44, Elsevier BV, 2023, pp. 16545–68, doi:10.1016/j.ijhydene.2023.01.194.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 43090
Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in Clinching Process Chain Simulation.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-33.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching Process Simulations.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-34.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 52454
Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-17 .
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49555
Rauhaus, Johann, et al. “Untersuchung des Reibungs- und Deformationsverhaltens von schnelllaufenden Bremsen.” Tagungsband der 64. Tribologie-Fachtagung, edited by Gesellschaft für Tribologie e.V, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 47084
Koers, Thorsten, and Balázs Magyar. “Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, vol. 34, 2023.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48790
Lammers, Stefan, et al. “Depiction of Support Structures in Technical Drawings.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023, edited by Joseph Beaman, vol. 34, 2023.
LibreCat
| Download (ext.)
2023 | Bachelorsthesis | LibreCat-ID: 52502
Tschöpe, Jan-Cedric Philipp Balthasar. Selektives Lasersintern mit glasverstärkten Kunstsoff-Dry-Blends Analyse von Verarbeitbarketi und Bauteileigenschaften im Vergleich zu partikelgefüllten Kunststoffpulvern. 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 51338
Schütte, Jan, and Walter Sextro. “Einfluss der Radhubkinematik auf den Reifenverschleiß.” 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, vol. 2425, VDI Verlag GmbH, 2023, pp. 165–80.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 50060
Gilich, Julian, et al. “Influences on the Flow Behavior of Highly Viscous Thermal Interface Materials in the Joining Process.” 14th European Adhesion Conference (EURADH) & 7th World Congress on Adhesion and Related Phenomena (WCARP), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 43031
Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” Materials Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 52405
Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52406
Grydin, Olexandr, et al. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_61.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48082 |
Yang, Keke, et al. “The Identification of a New Liquid Metal Embrittlement (LME) Type in Resistance Spot Welding of Advanced High-Strength Steels on Reduced Flange Widths.” Metals (Special Issue Embrittlement Phenomena in Steel Metallurgy), vol. 13, no. 10, MDPI, 2023, doi:10.3390/met13101754.
LibreCat
| Files available
| DOI
2023 | Journal Article | LibreCat-ID: 47042
Göddecke, Johannes, et al. “Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau.” Stahlbau, vol. 92, no. 8, Wiley, 2023, pp. 508–19, doi:10.1002/stab.202300031.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46164
Chudalla, Nick, et al. “Rechnergestützte Versagensanalyse Geklebter Verbindungen.” Adhäsion KLEBEN & DICHTEN, no. 6, 2023, doi:https://doi.org/10.1007/s35145-023-1198-x .
LibreCat
| DOI
2023 | Dissertation | LibreCat-ID: 52500
Josch, Sebastian. Rheologische Charakterisierung von Frischbeton : Entwicklung eines adaptiven Rheometers und Untersuchung wandgleitunterdrückender Messgeometrien. 2023, doi:10.17619/UNIPB/1-1859.
LibreCat
| DOI
2023 | Dissertation | LibreCat-ID: 52499
Gräßer, Melanie. Numerical Computation of Capillary Bridges between Directly Resolved Rough Interfaces. 2023, doi:10.17619/UNIPB/1-1691.
LibreCat
| DOI
2023 | Bachelorsthesis | LibreCat-ID: 52623
Peper, Frederik. Der Einfluss verschiedener Luftfilter auf die Geräuschemissionen von Personenkraftwagen. 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 52630
Wiebe, Robert. Qualifizierung des kyrogenen Mahlens zur Herstellung von gefüllten Kunststoffpulvern für das Lasersinterverfahren (Studienarbeit). 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 52632
Aissani, Soufiane. Polystyrol Nanopartikel asl alternative Fließhilfsmittel für SLS Materialien (Studienarbeit). 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 52627
Middelmann, Steffen. Der Einfluss verschiedener Partikelgrößenfraktionen eines PA12 Pulvers auf den Lasersinterprozess und auf die resultierenden Bauteileigenschaften. 2023.
LibreCat