Shnayien, Marie-Luise, and Christoph Engemann. “Thomas Nyckel, Isabel Schmiedel, und Florian Sprenger.” The Lab Book. Situated Practices in Media Studies, edited by Darren Wershler et al., Univ Of Minnesota Press, 2022.
Engemann, Christoph, et al. “ROBOTER BAUEN, PROGRAMMIEREN LERNEN, DIGITALE KULTUREN VERSTEHEN — Christoph Engemann, Sylvia Kokot, Thomas Nyckel, Isabel Schmiedel, Mary Shnayien, Florian Sprenger Über Arduino in Medienwissenschaftlicher Lehre Und Forschung.” Open Media Studies Blog, 2022.
Engemann, Christoph, et al. “FORSCHUNG (BE-)SCHREIBEN — Christoph Engemann, Sylvia Kokot, Thomas Nyckel, Isabel Schmiedel, Mary Shnayien, Florian Sprenger Über Medienwissenschaftliche Laborbücher.” Open Media Studies Blog, 2022.
Engemann, Christoph, et al. “Arduino.” The Lab Book. Situated Practices in Media Studies, edited by Darren Wershler et al., Univ Of Minnesota Press, 2022.
Heisler, Dietmar, and Susanne Schemmer. “Benachteiligtenförderung.” Psychische Belastungen in der Berufsbiografie. Interdisziplinäre Perspektiven., edited by Roland Stein and Hans-Walter Kranert, 1st ed., vol. 4, wbv, 2022, pp. 160–68, doi: 10.3278/9783763967735.
Heisler, Dietmar, editor. Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s). Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern. 1st ed., vol. 65, wbv, 2022, doi:10.3278/9783763972579.
Heisler, Dietmar. “Gebäude und Lernumgebungen von Pflegeschulen in Thüringen und Nordrhein-Westfalen.” Handbuch: Gebäude Berufsbildender Schulen, edited by Franz Ferdinand Mersch and Jörg-Peter Pahl, wbv, 2022, pp. 298–320.
Heisler, Dietmar. “Schulbauten Aus Sicht Der Beruflichen Fachrichtung Körperpflege.” Handbuch: Gebäude Berufsbildender Schulen, edited by Franz Ferdinand Mersch and Jörg-Peter Pahl, wbv, 2022, pp. 511–37.
Grüter, Sandra, et al. “‘Die sehen mich als irgendwas zwischen Schulsozialarbeiter und Sonderpädagoge’ - Ergebnisse einer Interviewstudie zur Rolle pädagogischer Fachkräfte in multiprofessionellen Teams an inklusive Schulen.” Zeitschrift für Inklusion, no. 4, 2022.
Ott, Manuel, et al. “Boosting Artificial Intelligence in Design Processes by the Use of Additive Manufacturing.” Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium 2022, vol. 33, 2022, pp. 696–705.
Schroeter-Wittke, Harald. “Johann Rist / Thomas Selle: Neue musikalische Fest-Andachten (1655). Kritisch hg. u. kommentiert v. Johann Anselm Steiger, Berlin/Boston 2020.” Jahrbuch für Evangelische Kirchengeschichte des Rheinlandes, vol. 71, 2022, pp. 210–15.
Schroeter-Wittke, Harald. “Esther Wipfler (Hg.), Das Gesangbuch und seine Bilder. Voraussetzungen, Gestaltung, Wirkung, Wien u.a. 2020.” Jahrbuch für Evangelische Kirchengeschichte des Rheinlandes, vol. 71, 2022, pp. 186–89.
Schroeter-Wittke, Harald. “Tersteegen meets Jazz … Felicia singt: Tersteegen. CD von Felicia Friedrich, Mülheim 2021.” Jahrbuch für Evangelische Kirchengeschichte des Rheinlandes, vol. 71, 2022, pp. 299–302.
Ahmadov, A. I., et al. “Bound State Solutions of Dirac Equation: Spin and Pseudo-Spin Symmetry in the Presence of the Combined Manning–Rosen and Yukawa Tensor Potentials.” The European Physical Journal Plus, vol. 137, no. 9, 1075, Springer Science and Business Media LLC, 2022, doi:10.1140/epjp/s13360-022-03255-9.
Günesli, Habib. “Sprache(n) im kindilchen Aneignungsprozess von (Medien-)Welt. Zur Relevanz der lebensweltlichen Mehrsprachigkeit von Kindergartenkindern aus Einwandererfamilien und mit einem deutsch-türkischen Hintergrund.” Mehrsprachigkeit und -kulturaltiät im Konflikt, edited by Yüksel Ekinci and Ludger Hoffmann, Iudicium, 2022, pp. 238–61.
Hammer, Manfred. “Small-Scale Online Simulations in Guided-Wave Photonics.” Integrated Optics: Devices, Materials, and Technologies XXVI, edited by Sonia M. García-Blanco and Pavel Cheben, SPIE, 2022, p. 1200414, doi:10.1117/12.2612208.
Ruiz Alvarado, Isaac Azahel, and Wolf Gero Schmidt. “Water/InP(001) from Density Functional Theory.” ACS Omega, vol. 7, no. 23, American Chemical Society (ACS), 2022, pp. 19355–64, doi:10.1021/acsomega.2c00948.
Moritz, Dominik Christian, et al. “P-Terminated InP (001) Surfaces: Surface Band Bending and Reactivity to Water.” ACS Applied Materials & Interfaces, vol. 14, no. 41, American Chemical Society (ACS), 2022, pp. 47255–61, doi:10.1021/acsami.2c13352.
Karmo, Marsel, et al. “Reconstructions of the As-Terminated GaAs(001) Surface Exposed to Atomic Hydrogen.” ACS Omega, vol. 7, no. 6, American Chemical Society (ACS), 2022, pp. 5064–68, doi:10.1021/acsomega.1c06019.
Schindlmayr, Arno. “Programmierung und Computersimulationen.” Kompetent Prüfungen gestalten: 60 Prüfungsformate für die Hochschullehre, edited by Julia Gerick et al., 2nd ed., Waxmann, 2022, pp. 270–74, doi:10.36198/9783838558592.
Bauch, Fabian, et al. “Protonation-Induced Charge Transfer and Polaron Formation in Organic Semiconductors Doped by Lewis Acids.” RSC Advances, vol. 12, no. 22, Royal Society of Chemistry (RSC), 2022, pp. 13999–4006, doi:10.1039/d2ra02032g.
Bathe, Thomas, et al. “Microscopic Study of Molecular Double Doping.” The Journal of Physical Chemistry A, vol. 126, no. 13, American Chemical Society (ACS), 2022, pp. 2075–81, doi:10.1021/acs.jpca.1c09179.
Murzakhanov, Fadis F., et al. “Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB– Spin States in HBN.” Nano Letters, vol. 22, no. 7, American Chemical Society (ACS), 2022, pp. 2718–24, doi:10.1021/acs.nanolett.1c04610.
Bocchini, Adriana, et al. “Electrochemical Performance of KTiOAsO_4 (KTA) in Potassium-Ion Batteries from Density-Functional Theory.” Phys. Rev. Materials, vol. 6, American Physical Society, 2022, p. 105401, doi:10.1103/PhysRevMaterials.6.105401.
Bocchini, Adriana, et al. “Oxygen Vacancies in KTiOPO_4: Optical Absorption from Hybrid DFT.” Phys. Rev. B, vol. 105, American Physical Society, 2022, p. 205118, doi:10.1103/PhysRevB.105.205118.
Müller, Inez. “Zur literarischen Kritik an binären Konstruktionen von Gesundheit, Krankheit und Geschlecht in Kathrin Schmidts Roman ‘Du stirbst nicht’t.” Krankheit und Gesundheit, edited by Edgar Platen, vol. 12, iudicium Verlag, 2022.
Müller, Inez. Transareales Gedenken an genozidale Geschichte in Analogie zum islamistischen Terror der Gegenwart in “Das Dorf” des algerischen Autors Boualem Sansal". Edited by Laura Auteri, vol. 4, 2022, p. 11.
Rehlaender, Philipp, et al. “Experimental Demonstration of a 2.2kW Active-Clamp Converter for High-Current Wide-Voltage-Transfer Ratio Applications.” 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), 2022, p. P.1-P.11.
Rehlaender, Philipp, et al. “Phase-Shift Modulation for Flying-Capacitor DC-DC Converters.” 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), 2022, pp. 1–9.
Wohlleben, Meike Claudia, et al. “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction.” Machine Learning, Optimization, and Data Science, Springer International Publishing, 2022, doi:10.1007/978-3-030-95470-3_8.
Meister, Dorothee M., and Lukas Dehmel. “Institutionen der Medienpädagogik. Erwachsenen- und Weiterbildung.” Handbuch Medienpädagogik., edited by Uwe Sander et al., Springer VS, 2022, pp. 871–78, doi:https://doi.org/10.1007/978-3-658-23578-9_98.
Kappe, Fabian, et al. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01151-w.
Zirngibl, Christoph, et al. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01117-y.
Rossel, Moritz Sebastian, and Gerson Meschut. “Investigation of the Friction Conditions of Self-Pierce Rivets by Means of a Compression-Torsion Tribometer.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01126-x.
Kappe, Fabian, et al. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.” Materials Design and Applications IV, Springer International Publishing, 2022, doi:10.1007/978-3-031-18130-6_10.
Kappe, Fabian, et al. “Determining the Influence of Different Process Parameters on the Versatile Self-Piercing Riveting Process Using Numerical Methods.” Journal of Manufacturing Processes, vol. 84, Elsevier BV, 2022, pp. 1438–48, doi:10.1016/j.jmapro.2022.11.019.
Kappe, Fabian, et al. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi:10.1177/14644207211070992.
Kappe, Fabian, et al. “Determining the Properties of Multi‑range Semi‑tubular Self‑piercing Riveted Joints.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01105-2.
Gräßler, Iris, et al. “Literature Study on the Potential of Artificial Intelligence in Scenario-Technique.” XXXIII ISPIM Innovation Conference Proceedings, LUT Scientific and Expertise Publications, 2022.
Penner, Eduard, et al. “A Polymorphic Uncertainty Model for the Curing Process of Transversely Fiber-Reinforced Plastics.” Mathematics and Mechanics of Complex Systems, vol. 10, no. 1, Mathematical Sciences Publishers, 2022, pp. 21–50, doi:10.2140/memocs.2022.10.21.
Mahnken, Rolf. “New Low Order Runge–Kutta Schemes for Asymptotically Exact Global Error Estimation of Embedded Methods without Order Reduction.” Computer Methods in Applied Mechanics and Engineering, vol. 401, 115553, Elsevier BV, 2022, doi:10.1016/j.cma.2022.115553.
Gräßler, Iris, et al. “Efficient Extraction of Technical Requirements Applying Data Augmentation.” Proceedings of 8th IEEE International Symposium on Systems Engineering 2022, 2022.
Gräßler, Iris, et al. “Gestaltung Einer Forschungsinfrastruktur Für Die Anwendung Digitaler Werkzeuge in Cyber-Physischen Produktionssystemen.” Automation 2022, VDI Verlag, 2022, doi:10.51202/9783181023990-667.
Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 683–89, doi:10.4028/p-3rk19y.
Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.” Metals, vol. 12, no. 1, 158, MDPI AG, 2022, doi:10.3390/met12010158.
Schramm, Britta, and Deborah Weiß. “Fracture Mechanical Evaluation of the Material HCT590X.” Materials Testing, vol. 64, no. 10, Walter de Gruyter GmbH, 2022, pp. 1437–49, doi:10.1515/mt-2022-0191.
Paul, Andreas, et al. “Impact of Aging on the Energy Efficiency of Household Refrigerating Appliances.” Applied Thermal Engineering, vol. 205, 117992, Elsevier BV, 2022, doi:10.1016/j.applthermaleng.2021.117992.
Javed, Muhammad Ali, et al. “Apparatus for the Measurement of the Thermodynamic Speed of Sound of Diethylene Glycol and Triethylene Glycol.” The Journal of Chemical Thermodynamics, 106766, Elsevier BV, 2022, doi:10.1016/j.jct.2022.106766.
Khider Abbas Abbas, Wameedh, et al. “Experimental Investigation of Organic Rankine Cycle Performance Using Alkanes or Hexamethyldisiloxane as a Working Fluid.” Energy Conversion and Management: X, 100244, Elsevier BV, 2022, doi:10.1016/j.ecmx.2022.100244.
Betken, Benjamin, et al. “Thermodynamic Properties for 1-Hexene – Measurements and Modeling.” The Journal of Chemical Thermodynamics, 106881, Elsevier BV, 2022, doi:10.1016/j.jct.2022.106881.
Bielak, Christian Roman, et al. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_15.
Jende, Yvonne Kristin. “Out of the Box and into the Gutter. Rethinking Space in Michael Nicoll Yahgulanaas’ Haida Manga Art.” Artistic Practices of (Un-)Making Place, International and Interdisciplinary Conference, 2022.
Blumenthal, Lars Martin, and Detmar Zimmer. “Multidomänensimulation des Schaltverhaltens von Federkraftbremsen.” Konstruktion, vol. 74, no. 11–12, VDI Fachmedien GmbH and Co. KG, 2022, pp. 78–86, doi:10.37544/0720-5953-2022-11-12-78.
Ehlert, Meik, et al. “Analysis of Differential Algebraic Equation Systems for Connecting Energy Storages of Generally Valid Functional Mock-up Units.” Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, SCITEPRESS - Science and Technology Publications, 2022, doi:10.5220/0011305700003274.
Bader, Fabian, et al. An Approach for an Innovative 3d Steel Strip Straightening Machine for Curvature and Saber Compensation. 2022, doi:https://doi.org/10.4028/p-87wvu0.
Koppert, Steven, et al. “Tool Wear Monitoring of a Tree Log Bandsaw Using a Deep Convolutional Neural Network on Challenging Data.” IFAC-PapersOnLine, vol. 55, no. 2, Elsevier BV, 2022, pp. 554–60, doi:10.1016/j.ifacol.2022.04.252.
Brosch, Anian, et al. “Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems.” IEEE Open Journal of Industry Applications, Institute of Electrical and Electronics Engineers (IEEE), 2022, doi:10.1109/ojia.2022.3171333.
Malena, Kevin, et al. “Traffic Estimation and MPC-Based Traffic Light System Control in Realistic Real-Time Traffic Environments.” Communications in Computer and Information Science, edited by Cornel Klein et al., vol. 1612, Springer International Publishing, 2022, pp. 232–254, doi:10.1007/978-3-031-17098-0_12.
Junker, Annika, et al. “Data-Driven Models for Control Engineering Applications Using the Koopman Operator.” 2022 3rd International Conference on Artificial Intelligence, Robotics and Control (AIRC 2022), pp. 1–9, doi:10.1109/AIRC56195.2022.9836980.
Götte, Ricarda-Samantha, and Julia Timmermann. “Composed Physics- and Data-Driven System Identification for Non-Autonomous Systems in Control Engineering.” 2022 3rd International Conference on Artificial Intelligence, Robotics and Control (AIRC), 2022, pp. 67–76, doi:10.1109/AIRC56195.2022.9836982.
Schütz, Stefan, et al. “Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC.” 2022 IEEE International Systems Conference (SysCon), IEEE, 2022, pp. 1–8, doi:10.1109/syscon53536.2022.9773878.
Lenz, Cederic, et al. “Anomaly Detection in Hot Forming Processes Using Hybrid Modeling - Part II.” 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), IEEE, 2022, doi:10.1109/ETFA52439.2022.9921510.
Simo Kamga, Lionel, et al. “Simulative Investigation of the Influence of Surface Texturing on the Elastohydrodynamic Lubrication in Chain Joints.” Tribology International, vol. 171, 2022, p. 107564, doi:https://doi.org/10.1016/j.triboint.2022.107564.
Hagemeyer, Marc. Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen. 2022, doi:10.17619/UNIPB/1-1582.
Schulz, Andreas Markus, et al. “A PLIC-Based Method for Species Mass Transfer at Free Fluid Interfaces.” Chemical Engineering Science, vol. 250, Elsevier, 2022, doi:10.1016/j.ces.2021.117357.
Wecker, Christian, et al. “Droplet Formation –a Numerical Investigation of Liquid-Liquid Systems with Consideration of Marangoni Convection.” International Journal of Heat and Mass Transfer, vol. 188, ELSEVIER, 2022, doi:10.1016/j.ijheatmasstransfer.2021.122465.
Inguva, Venkatesh, et al. “A Front-Tracking Method for Two-Phase Flow Simulation with No Spurious Currents.” Journal of Computational Physics, vol. 456, 1110066, Elsevier, 2022.
Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, MDPI, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
Reitz, Alexander, et al. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.” Metallurgical and Materials Transactions A, vol. 53, no. 8, Springer Science and Business Media LLC, 2022, pp. 3125–42, doi:10.1007/s11661-022-06732-z.
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, MDPI AG, 2022, p. 185, doi:10.3390/jfb13040185.
Šlapáková, Michaela, et al. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.” Materials Characterization, vol. 190, 112005, Elsevier BV, 2022, doi:10.1016/j.matchar.2022.112005.
Westermann, Hendrik, et al. “Microstructure Transformations in a Press Hardening Steel during Tailored Thermo‐mechanical Processing.” Steel Research International, 2022, doi:10.1002/srin.202100346.
Reitz, Alexander, et al. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22MnB5.” Materials Science and Engineering: A, vol. 838, 142780, Elsevier BV, 2022, doi:10.1016/j.msea.2022.142780.
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
Vieth, P., et al. “Enhancement of the Delamination Resistance of Adhesive Film Coated Surface Laser Melted Aluminum 7075-T6 Alloy by Aminophosphonic Acid Adsorption.” Surface and Coatings Technology, vol. 447, 128835, Elsevier BV, 2022, doi:10.1016/j.surfcoat.2022.128835.
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” Advanced Engineering Materials, Wiley, 2022, doi:10.1002/adem.202200022.
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, 2022, doi:https://doi.org/10.1002/adem.202201008.
Pramanik, Sudipta, et al. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.” Crystals, vol. 12, no. 9, 1217, MDPI AG, 2022, doi:10.3390/cryst12091217.
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
Zibart, Alexander, et al. “Determination of the Burst Pressure of Pillow Plates Using Finite Element Methods.” Computer Aided Chemical Engineering, vol. 51, Elsevier, 2022, pp. 127–32, doi:10.1016/b978-0-323-95879-0.50022-9.
Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.” International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion Science, vol. 200, Elsevier BV, 2022, p. 110186, doi:10.1016/j.corsci.2022.110186.
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced Engineering Materials, vol. 24, no. 9, 2200022, Wiley, 2022, doi:10.1002/adem.202200022.
Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” Corrosion Science, vol. 200, 110186, Elsevier BV, 2022, doi:10.1016/j.corsci.2022.110186.
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, Wiley, 2022, doi:10.1002/adem.202201008.
Pramanik, Sudipta, et al. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.” Crystals, vol. 12, no. 9, 1217, MDPI AG, 2022, doi:10.3390/cryst12091217.
Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.” International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.
Sundermeier, Stephan, et al. “Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers.” International Journal of Turbomachinery, Propulsion and Power, vol. 7, no. 2, 12, MDPI AG, 2022, doi:10.3390/ijtpp7020012.
Hami Dindar, Iman, et al. “Wässrige Aminozuckerlösungen Als Neue Lösungsmittel Zur CO2-Abscheidung.” Jahrestreffen Der ProcessNet Fachgruppen Fluidverfahrenstechnik Und Hochdruckverfahrenstechnik, 2022.
Mamedov, Tural, et al. “Flow Morphology of TEG Desiccant in a Structured Packing Air Dehumidifier Exposed to Floating Conditions.” Proceedings of the 12th International Conference Distillation & Absorption 2022, 2022.
Behler, Felix. “He’d Seen It in the Words of Owen and Brooke’: Toward a Renaissance of Soldier Poetry in Twenty-First Century Britain.” ESSE Conference 2022. Seminar: British and Irish Poetry after the Turn of the Millennium: Trends, Public/Counterpublic, Institutions. Organisation: Professor David Malcomb (University of Gdansk), Wolfgang Görtschacher (University of Salzburg), 2022.
Behler, Felix. “Configuring the War-Zone: Battlefields as Markers of Glory and Catastrophe in Modern and Contemporary British Literature.” Artistic Practices of (Un-)Making Place. Organisation: Professor Mihaela Irimia (University of Bukarest), Univ. Professor Christoph Singer (University of Innsbruck), Professor Christoph Ehland (University of Paderborn), 2022.
Behler, Felix. “The Iraq and Afghanistan War Memorial - A Landmark Shift in British Memory Culture.” BRITCULT 2022: British Identities Medialised. Organisation: Univ. Professor Dorothea Flothow, Dr. Sarah Herbe, Assoz. Professor Markus Oppolzer, Dr. Elizabeth Schober (Paris Lodron Universität Salzburg), 2022.
Behler, Felix. “Inventing a New Landscape: The Literature(s) of Gardening in 18th-Century-England.” MLA Convention 2022. Session: Architectural Spaces and the Constitution of Authority in Early Modern European Literature. Organisation: Professor Katherine Brown (Albright College Pennsylvania), 2022.
Behler, Felix. “Recapturing ‘Old England’ – Nostalgia, Aristo-Anglophilia, and the Transnational Impact of ITV’s ‘Downton Abbey’.” Identity and Otherness in Film. Organisation: London Centre for Interdisciplinary Research, 2022.
Rossel, Moritz Sebastian, and Gerson Meschut. “Increasing the Accuracy of Clinching Process Simulations by Modeling the Friction as a Function of Local Joining Process Parameters.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210742, SAGE Publications, 2022, doi:10.1177/14644207221074290.
Sander, Sascha, et al. “Methodology for the Systematic Investigation of the Hygrothermal-Mechanical Behavior of a Structural Epoxy Adhesive.” International Journal of Adhesion and Adhesives, 103072, Elsevier, 2022, doi:10.1016/j.ijadhadh.2021.103072.
Kuball, Clara-Maria, et al. “Process-Adapted Temperature Application within a Two-Stage Rivet Forming Process for High Nitrogen Steel.” Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2022, pp. 1–17, doi:10.1177/14644207211068693.
Inguva, Venkatesh, et al. “On Methods to Reduce Spurious Currents within VOF Solver Frameworks. Part 1: A Review of the Static Bubble/Droplet.” Chemical Product and Process Modeling, vol. 17, 2022, pp. 121–35.
Wende, Marc, et al. “Modelling and Simulation of Zero-Gravity Distillation Units with Metal Foams.” Chemical Engineering Science, vol. 247, 117097, Elsevier BV, 2022, doi:10.1016/j.ces.2021.117097.
Bothe, Mike, et al. “Model Based and Experimental Analysis of the Dynamic Reactive Absorption Loop Behavior.” Proceedings of the 12th International Conference Distillation & Absorption 2022, 2022.
Kenig, Eugeny Y. “Modeling Concepts for Reactive Separations.” Process Intensification by Reactive and Membrane-Assisted Separations, edited by Mirko Skiborowski and Andrzej Górak, 2nd ed., De Gruyter, 2022, doi:10.1515/9783110720464.
Uhe, Benedikt, and Gerson Meschut. Lösungsstrategien Für Das Halbhohlstanznieten von Höchstfesten Und Ultrahöchstfesten Stählen Mit Aluminiumwerkstoffen. Edited by FOSTA, EFB, DVS, 2022.
Wu, Tao, et al. “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects.” Journal of Composites Science, vol. 6, no. 5, 138, MDPI AG, 2022, doi:10.3390/jcs6050138.
Bielak, Christian Roman, et al. “Numerical Investigation of a Friction Test to Determine the Friction Coefficients for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.
Ewenz, Lars, et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.
Wende, Marc, and Eugeny Y. Kenig. “Modeling of a Hybrid Process Combining Zero-Gravity Distillation and Vapor Permeation.” Proceedings Int. Conf. „Distillation and Absorption 2022”, 2022.
Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
Tittmann, Karsten, et al. “Service Strength Analysis Method for Adhesively Bonded Hybrid Structures under Multiaxial Loading.” Proceedings of the 20th European Conference on Composite Materials, edited by Ecole Polytechnique Fédérale de Lausanne (EPFL), vol. 2, 2022, pp. 730–39.
Martin, Sven, et al. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.” Key Engineering Materials, vol. 927, 2022, doi: https://doi.org/10.4028/p-09md1c.
Bertling, René, et al. “Modelling Film and Rivulet Flows on Microstructured Surfaces Using CFD Methods.” Chemical Engineering Science, vol. 251, 117414, Elsevier BV, 2022, doi:10.1016/j.ces.2021.117414.
Bertling, R., et al. “Modelling Film and Rivulet Flows on Microstructured Surfaces Using CFD Methods.” Chemical Engineering Science, vol. 251, 117414, Elsevier BV, 2022, doi:10.1016/j.ces.2021.117414.
Brüning, Florian, and Volker Schöppner. “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders.” Polymers 14, 2022, doi:https://doi.org/10.3390/polym14020256.
Schöppner, Volker, et al. “A Comparison of Heuristic, Statistical, and Machine Learning Methods for Heated Tool Butt Welding of Two Different Materials.” Welding in the World, 2022, p. 14.
Moritzer, Elmar, et al. “Material-Specific Prediction of the Optimal Joinig Parameters for the Screw Blind Rivet Joining Process.” Welding in the World, 2022.
Rozo Vasquez, Julian, et al. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.” Practical Metallography, vol. 59, no. 11, Walter de Gruyter GmbH, 2022, pp. 660–75, doi:10.1515/pm-2022-0064.
Rozo Vasquez, Julian, et al. “Soft Sensor Concept for Micromagnetic Depth-Specific Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.
Kersting, Lukas, et al. Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile. Diedrich, 2022.
Schön, Oliver, et al. “Multi-Objective Physics-Guided Recurrent Neural Networks for Identifying Non-Autonomous Dynamical Systems.” 14th IFAC Workshop on Adaptive and Learning Control Systems (ALCOS 2022), vol. 55, no. 12, 2022, pp. 19–24, doi:https://doi.org/10.1016/j.ifacol.2022.07.282.
Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1457–67, doi:10.4028/p-5fxp53.
Finke, Josefine, et al. “(De)Coding Social Practice in the Field of XAI: Towards a Co-Constructive Framework of Explanations and Understanding Between Lay Users and Algorithmic Systems.” Artificial Intelligence in HCI, Springer International Publishing, 2022, pp. 149–60, doi:10.1007/978-3-031-05643-7_10.
Horwath, Ilona. “Algorithmen, KI und soziale Diskriminierung.” Inter- und multidisziplinäre Perspektiven der Geschlechterforschung, edited by Kordula Schnegg et al., 1st ed., vol. 4, innsbruck university press, 2022, pp. 71–101.
Horwath, Ilona, et al. “Waschen, Warten, Wege ebnen. Ambivalente Fürsorge und der männliche Heldenmythos in der Feuerwehr.” Care-Arbeit und Gender in der digitalen Transformation, edited by Mara Kastein and Lena Weber, 1st ed., Juventa Verlag, 2022, pp. 119–34.
Hanses, Hendrik, and Ilona Horwath. “OPERATIONAL AND DEMAND-ORIENTED FIREFIGHTING EQUIPMENT .” Conference Proceedings 38th Danubia Adria Symposium on Advances in Experimental Mechanics, edited by Stavros K. Kourkoulis, 2022.
Gräßler, Iris, et al. “Proactive Management of Requirement Changes in the Development of Complex Technical Systems.” Applied Sciences, vol. 12, no. 4, 1874, MDPI AG, 2022, doi:10.3390/app12041874.
Eckel, Julia. “Animation und Mimesis. Zur digitalen Expansion bewegtbildlicher Mimesis und ‚animimetischem‘ Denken.” Mimesis Expanded. Die Ausweitung der mimetischen Zone, edited by Friedrich Balke and Elisa Linseisen, Fink, 2022, pp. 267–94.
Klippstein, Sven Helge, et al. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, Springer, 2022, pp. 1149–1157, doi:https://doi.org/10.1007/s11837-021-05042-w .
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, 2022.
Schmidt, Stephan, et al. “A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges.” SIAM Journal on Scientific Computing, vol. 44, no. 4, Society for Industrial & Applied Mathematics (SIAM), 2022, pp. B1175–94, doi:10.1137/20m1389054.
Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering with PA12 and PA6 on a Standard System.” Macromolecular Symposia, vol. 404, no. 1, 2100397, Wiley, 2022, doi:10.1002/masy.202100397.
Wiens, Eugen. Innendrückwalzen – Ein Innovatives Umformverfahren Zur Inkrementellen Formgebung von Wanddickenkonturierten Rohren Mit Lokal Einstellbaren Mechanischen Eigenschaften. Shaker, 2022.
Scheveleva, Tatyana, et al. Creation of a Knowledge Space by Semantically Linking Data Repository and Knowledge Management System - a Use Case from Production Engineering. 2022, doi:10.1016/j.ifacol.2022.10.006.
Mozgova, Iryna, et al. Knowledge Annotation within Research Data Management System for Oxygen-Free Production Technologies. 2022, doi:10.1017/pds.2022.54.
Schneider, Jannik, et al. Comparative Evaluation of Product and Service Solutions in the Context of Product-Service Systems and Technical Inheritance. 2022, doi:https://doi.org/10.1007/978-3-030-94335-6_23.
Herrmann, Kevin, et al. Quantification of the Material-Related Environmental Impact of Topology-Optimized Multi-Material Components. 2022, doi:10.35199/dfx2022.01.
Wurst, Johanna, et al. Sustainability Assessment of Products Manufactured by the Laser Powder Bed Fusion (LPBF) Process. 2022, doi:10.1016/j.procir.2022.02.040.
Sheveleva, Tatyana, et al. Ontology-Based Documentation of Quality Assurance Measures Using the Example of a Visual Inspection. 2022, doi:10.1007/978-3-031-16281-7_39.
Lachmayer, Roland, and Iryna Mozgova. “Technical Inheritance as an Approach to Data-Driven Product Development.” Design Methodology for Future Products, 2022, doi:10.1007/978-3-030-78368-6_3.
Wurst, Johanna, et al. Corporate Strategy Based Quantitative Assessment of Sustainability Indicators at the Example of a Laser Powder Bed Fusion Process. 2022, doi:10.1007/978-981-16-6128-0_4.
Wawer, Max Leo, et al. Parametrization of a Hybrid Component Production Process Chain Based on Semantically Annotated Data. . 2022, doi:10.15488/13290.
Wurst, Johanna, et al. Normalization Matrix for Sustainability Assessments Considering the Laser Powder Bed Fusion Process. 2022, doi:10.1007/978-3-031-05918-6_14.
Burban, Igor, and Yu. Drozd. “Morita Theory for Non-Commutative Noetherian Schemes.” Advances in Mathematics, vol. 399, 108273, 2022, doi:10.1016/j.aim.2022.108273.
Burban, Igor, and A. Peruzzi. “On Elliptic Solutions of the Associative Yang-Baxter Equation.” Journal of Geometry and Physics, vol. 176, 104499, 2022.
Tulowitzki, Pierre, et al. “The Role of ICT for School Leadership and Management Activities: An International Comparison.” International Journal of Educational Management, vol. 36, no. 2, Emerald, 2022, pp. 133–51, doi:10.1108/ijem-06-2021-0251.
Schulze, Johanna, et al. “Implementierung Schulischer Medienkonzepte Als Kooperationsanlass.” MedienPädagogik: Zeitschrift Für Theorie Und Praxis Der Medienbildung, vol. 49, Sektion Medienpadagogik der Deutschen Gesellschaft fur Erziehungswissenschaft - DGfE, 2022, pp. 115–36, doi:10.21240/mpaed/49/2022.06.25.x.
Faulwasser, Timm, et al. “Manifold Turnpikes, Trims, and Symmetries.” Mathematics of Control, Signals, and Systems, vol. 34, Springer, 2022, pp. 759–88.
Gerick, J., and Birgit Eickelmann. “Computer- und informationsbezogene Kompetenzen und Computational Thinking: Ein Überblick über die Konstrukte der International Computer and Information Literacy Study (ICILS 2018).” Kompetenzmodelle für den Digitalen Wandel. Kompetenzmanagement in Organisationen , edited by R. Knackstedt et al., Springer, 2022, pp. 33–48, doi:https://doi.org/10.1007/978-3-662-63673-2_2.
Eickelmann, Birgit, et al. Massive Open Online Course: Bildungsgerechte Schulentwicklung im Zuge der Digitalisierung. Eine Online-Ressource des QLB-Projektes COMeIN (Communities of Practice für einen innovative Lehrerbildung). Universität Paderborn, 2022.